2BHGF-0235CC1AIndoor Camera

Quick Guide US+1 833 700 5555 UK+44 808 175 3257 Scan for video, user guide, support... x 1x 1x 1 x 1x 1 Status Description Flashing green Network configuration status Steady green Connected to the network Steady red Device is starting up Flashing red Network Abnormality Reset SD Add Device Register code Add Successfully 1 EN Disclaimer and Safety Warnings Copyright Statement No part of this manual may be copied, reproduced, translated or distributed in any form or by any means without prior consent in writing from our company (referred to as us hereafter). The product described in this manual may contain proprietary software owned by our company and its possible licensors. Unless permitted, no one is allowed to copy, distribute, modify, abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer, or sublicense the software in any form or by any means. EU Authorised Representative UNV Technology EUROPE B.V. Treubstraa 1, 2288 EG, Rijswijk, Netherlands. About This Manual  This manual is intended for multiple product models, and the photos, illustrations, descriptions, etc, in this manual may be different from the actual appearances, functions, features, etc, of the product .  This manual is intended for multiple software versions, and the illustrations and descriptions in this manual may be different from the actual GUI and functions of the software.  Despite our best efforts, technical or typographical errors may exist in this manual. Our company cannot be held responsible for any such errors and reser ves the right to change the manual without prior notice.  Users are fully responsible for the damages and losses that arise due to improper operation.  Our company reser ves the right to change any information in this manual without any prior notice or indication. Due to such reasons as product version upgrade or regulatory requirement of relevant regions, this manual will be periodically updated. Safety Warnings The device must be installed, serviced and maintained by a trained professional with necessary safety knowledge and skills. Before you start using the device, please read through this guide carefully and make sure all applicable requirements are met to avoid danger and loss of property. Storage, Transportation, and Use  Store or use the device in a proper environment that meets environmental requirements, including and not limited to, temperature, humidity, dust , corrosive gases, electromagnetic radiation, etc.  Make sure the device is securely installed or placed on a flat surface to prevent falling.  Unless otherwise specified, do not stack devices.  Ensure good ventilation in the operating environment. Do not cover the vents on the device. Allow adequate space for ventilation.  Protect the device from liquid of any kind.  Make sure the power supply provides a stable voltage that meets the power requirements of the device. Make sure the power supply's output power exceeds the total maximum power of all the connected devices.  Verify that the device is properly installed before connecting it to power.  Do not remove the seal from the device body without consulting our company first. Do not attempt to service the product yourself. Contact a trained professional for maintenance.  Always disconnect the device from power before attempting to move the device.  Take proper waterproof measures in accordance with requirements. Power Requirements  Install and use the device in strict accordance with your local electrical safety regulations.  Use a UL certified power supply that meets LPS requirements if an adapter is used.  Use the recommended cordset (power cord) in accordance with the specified ratings.  Only use the power adapter supplied with your device.  Use a mains socket outlet with a protective earthing (grounding) connection.  Ground your device properly if the device is intended to be grounded. Battery Use Caution  When battery is used, avoid:  Extremely high or low temperature and air pressure during use, storage and transportation;  Battery replacement.  Use the battery properly. Improper use of the battery such as the following may cause risks of fire, explosion or leakage of flammable liquid or gas.  Replace battery with an incorrect type;  Dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery;  Dispose of the used battery according to your local regulations or the batter y manufacturer's instructions. 2 Avertissement de l’utilisation de la batterie  Lorsque utiliser la batterie, évitez:  Température et pression d'air extrêmement élevées ou basses pendant l'utilisation, le stockage et le transport.  Remplacement de la batterie.  Utilisez la batterie correctement. Mauvaise utilisation de la batterie comme celles mentionnées ici, peut entraîner des risques d’incendie, d’explosion ou de fuite liquide de gaz inflammables.  Remplacer la batterie par un type incorrect;  Disposer d’une batterie dans le feu ou un four chaud, écraser mécaniquement ou couper la batterie;  Disposer la batterie utilisée conformément à vos règlements locaux ou aux instructions du fabricant de la batterie. Regulatory Compliance FCC Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Visit https://youkey.com/pages/product-installation-declaration for SDoC Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. N OTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential install…

Text truncated - open the document above for the full version.

KeyLife International Technology Limited U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: United Consulting Technology Services Co., Ltd. FRN: 0033495714 Contact Name: David Wu Street Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY City/Province/Zip: CA 91748 Telephone No: (626) 217-4022 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicantnoted below. U.S. Agent Signature: Date: 2026-02-06 Signed by (Printed Name/Title): David Wu/ CEO The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion ofany Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: KeyLife International Technology Limited Grantee Code: 2BHGF FRN:0035661016 FCC ID: 2BHGF-0235CC1A Contact Name: Zhao Hu Street Address: Workshop 7, 6th Floor Core 45, No. 43 Tsun Yip Street, Kowloon, HONG KONG City/Province/Zip: Hong Kong, China Telephone No: 18167175029 Email: [email protected] Applicant Signature: Date: 2026-02-06 Signed by (Printed Name/Title): Zhao Hu, Certified Engineer

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name KeyLife International Technology Limited Address Workshop 7, 6th Floor Core 45, No. 43 Tsun Yip Street, Kowloon, Hong Kong FRN 0035661016 Grantee Code 2BHGF FCC ID: 2BHGF-0235CC1A Authorized Contact Name Hu Zhao Contact Phone 18167175029 Contact Email [email protected] KeyLife International Technology Limited (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date: 2026-02-06 Print Name: Zhaohu Title: Certification Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name KeyLife International Technology Limited Address Workshop 7, 6th Floor Core 45, No. 43 Tsun Yip Street, Kowloon, Hong Kong FRN 0035661016 Grantee Code 2BHGF FCC ID: 2BHGF-0235CC1A Authorized Contact Name Hu Zhao Contact Phone 18167175029 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date:2026/02/06 Print Name: Zhaohu Title: Certification Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

KeyLife International Technology Limited Current Date : 2026-02-06 To : SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. No. 588 West Jindu Road, Songjiang District, Shanghai, China. 201612 Dear Sir/Madam, Subject: Declaration Letter about Identity of Products *WE (KeyLife International Technology Limited) HEREBY DECLARED THAT Product Description Indoor Camera Model No. P370A XXXX XXXX XXXX,P370A-XXXX-XXXX-XXXX (where X may be '0-9' 'A-Z' 'a-z' '-' or blank; '-' is option) Manufacturer’s Name KeyLife International Technology Limited Manufacturer’s Address Workshop 7, 6th Floor Core 45, No. 43 Tsun Yip Street, Kowloon, Hong Kong *Except that the model number and appearance deviation, are identical with the original product as follows: Note: The definition of identical should be “electrically identical”. A device will be considered to be electrically identical if no changes are made to the devices’ schematics, board layouts, component layouts, chip sets, resistors and all other electrical aspects of the device are identical. with the model(s) below which samples we chose to be tested by SGS Model No. (型号): P370A Manufacturer’s Name (生产商名称): KeyLife International Technology Limited Manufacturer’s Address（生产商商地址): Workshop 7, 6th Floor Core 45, No. 43 Tsun Yip Street, Kowloon, Hong Kong Sincerely, Signature (签字): Printed Name (姓名): Zhaohu Position/Title (职位): Certification Engineer Contact Number (联系电话): 18167175029

KeyLife International Technology Limited Date: 2026.02.06 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2BHGF-0235CC1A To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with KeyLife International Technology Limited . This authorization is valid until further written notice from the applicant. Name (Printed): ZhaoHu Title: Certification Engineer Signature: On behalf of Company: KeyLife International Technology Limited Telephone: 18167175029

KeyLife International Technology Limited 2026-02-06 To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: KeyLife International Technology Limited Address: Workshop 7, 6th Floor Core 45, No. 43 Tsun Yip Street, Kowloon, HONG KONG Regarding: Confidentiality Request regarding application for FCC ID: 2BHGF-0235CC1A LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Description The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name: Zhao Hu Title: Certified Engineer Company Name: KeyLife International Technology Limited

Compliance Certification Services (Kunshan) Inc. Page: 1 of 7 External Photos for KSCR2601000024AT Compliance Certification Services (Kunshan) Inc. Page: 2 of 7 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 7 Compliance Certification Services (Kunshan) Inc. Page: 4 of 7 Compliance Certification Services (Kunshan) Inc. Page: 5 of 7 Compliance Certification Services (Kunshan) Inc. Page: 6 of 7 Compliance Certification Services (Kunshan) Inc. Page: 7 of 7 - End of the Appendix -

Page 1 of 1

Compliance Certification Services (Kunshan) Inc. Page: 1 of 3 Internal Photos for KSCR2601000024AT Compliance Certification Services (Kunshan) Inc. Page: 2 of 3 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 3 - End of the Appendix -

Report No.: KSCR260100002403 Page: 1 of 12 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 1 Cover Page RF Exposure Evaluation Report Application No.: KSCR2601000024AT FCC ID: 2BHGF-0235CC1A Applicant: KeyLife International Technology Limited Address of Applicant: Workshop 7, 6th Floor Core 45, No. 43 Tsun Yip Street, Kowloon, HONG KONG Manufacturer: KeyLife International Technology Limited Address of Manufacturer: Workshop 7, 6th Floor Core 45, No. 43 Tsun Yip Street, Kowloon, HONG KONG Equipment Under Test (EUT): EUT Name: Indoor Camera Model No.: P370A,P370A XXXX XXXX XXXX,P370A-XXXX-XXXX-XXXX (where X may be '0-9' 'A-Z' 'a-z' '-' or blank; '-' is option)  Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-01-05 Date of Test: 2026-01-12 to 2026-02-02 Date of Issue: 2026-02-03 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR260100002403 Page: 2 of 12 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 Revision Record Version Description Date Remark 00 Original 2026-02-03 / Authorized for issue by: Tested By Maker Qi /Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR260100002403 Page: 3 of 12 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 2 Contents Page 1 Cover Page ........................................................................................................................................ 1 2 Contents ............................................................................................................................................ 3 3 General Information .......................................................................................................................... 4 3.1 General Description of E.U.T. .................................................................................................... 4 3.2 Technical Specifications ............................................................................................................. 4 3.3 Separation Distance ................................................................................................................... 5 3.4 Test Location ............................................................................................................................ 6 3.5 Test Facility............................................................................................................................... 6 4 RF Exposure Test Exemptions ........................................................................................................ 7 4.1 FCC RF Exposure Test Exemptions for single RF sources ....................................................... 7 4.2 RF Exposure Test Exemptions for Simultaneous Transmission ................................................ 9 5 asurement and Calculation ............................................................................................................ 11 5.1 Maximum transmit power ......................................................................................................... 11 5.2 RF Exposure Calculation ......................................................................................................... 12 Report No.: KSCR260100002403 Page: 4 of 12 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3 General Information 3.1 General Description of E.U.T. Power supply: Power Adapter1: Model: TPA-46B050100UU Input: 100~240V~,50-60Hz,0.15A Output: 5V/1A 5W Power Adapter2: Model: DCT06W050100US-C0 Input: 100~240V~,50-60Hz,200mA Output: 5V/1A 3.2 Technical Specifications BLE Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: Iron plate antenna Antenna Gain: 3.94dBi (Provided by the manufacturer) 2.4GHz WiFi Operation Frequency: 802.11b/g/n(HT20)/ax(HE20):2412MHz to 2462MHz; 802.11n(HT40)/ax(HE40):2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK), 802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK), 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM) Number of Channels: 802.11b/g/n(HT20)/ax(HE20):11;802.11n(HT40)/ax(HE40):7 Channel Spacing: 5MHz Antenna Type: Iron plate antenna Antenna Gain: 3.94dBi (Provided by the manufacturer) Report No.: KSCR260100002403 Page: 5 of 12 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3.3 Separation Distance Separation distance between the antenna to person (R): 5cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. R has been stated in user manual. Report No.: KSCR260100002403 Page: 6 of 12 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3.4 Test Location All tests were performed at: Compliance Certification Services (Kunshan) Inc. No.10 Weiye Rd, Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China. Tel: +86 512 5735 5888 Fax: +86 512 5737 0818 No tests were sub-contracted. Note: 1. SGS is not responsible for wrong test results due to incorrect information (e.g., max. internal working frequency, antenna gain, cable loss, etc) is provided by the applicant. (If applicable). 2. SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (If applicable). 3. Sample source: sent by customer. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 2541.01) Compliance Certification Services (Kunshan) Inc. is accredited by the American Association for Laboratory Accreditation (A2LA). • FCC (Designation Number: CN1172) Compliance Certification Services (Kunshan) Inc. has been recognized as an accredited testing laboratory. • ISED (CAB Identifier: CN0072) Compliance Certification Services (Kunshan) Inc. has been recognized by Innovation,…

Text truncated - open the document above for the full version.

广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第1页共8页 产品规格承认书 SpecificationForApproval 客户名称： Customer 浙江宇视科技有限公司 供应商： Supplier 广州市高科中实通信技术有限公司 客户料号： CustomerP/N 产品名称： ProductionName WIFI铁片天线 产品型号： ProductionNumber GKZS-WIFI-TP1413-S 供应商确认盖章(SupplierSignature) 工程师Engineer审核Checkedby批准Approvedby 黄裕明谢倩菊杨敬松 2025年08月25日2025年08月25日2025年08月25日 客户确认盖章(CustomerSignature) 工程师Engineer审核Checkedby批准Approvedby 年月日年月日年月日 注：客户确认盖章后，请将此承认书回传到我公司。 广州市高科中实通信技术有限公司 地址:中国广东省广州市从化区神岗广从南路22号 Tel:020-87080630/87080639/87080632 Fax:020-87080731 http://www.gkzs.com.cn 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第2页共8页 变更履历表 DescriptionRecord 版本 Version 修改内容 ContentRevised 创建者 Modifier 日期 Date A/0初始新建谢勉艾2023.07.11 A/1更新图纸、实物图谢勉艾2023.12.15 A/2增加包装方式谢勉艾2024.07.11 A/3更新包装按2PCS/格96PCS/盘胡梅娇2025.08.25 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第3页共8页 一、产品结构图纸（mm） 14±0.2 7.85±0.2 3.5±0.2 1.5±0.2 9.1±0.2 1±0.2 1±0.2 3.75±0.2 6±0.2 9.6±0.2 13.1±0.23±0.2 标记位置更 改 内 容 版本 签名/日期 图样名称 表面处理 第三视角： 审 核 工 艺 标准化 批 准 产品型号 比例 图样编号 单位 mm 版本页次 材 料 重 量 设 计 宿迁可耐可特有限公司 1/1A0 混合 WIFI铁片天线 GKZS-WIFI-TP1413-S 弯折侧面图 正面图 背面图 二、产品实物图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第4页共8页 三、天线技术参数 天线形式(Antennaform)WIFI铁片天线 工作频率(workingFrequency)2400-2500MHz、5150-5850MHz 增益（Gain） 3.37dBi（均值）、3.94dBi（峰值）@2400-2500MHz 3.38dBi（均值）、3.89dBi（峰值）@5150-5850MHz 天线效率（Antennaefficiency） 58.22%（均值）、60.02%（峰值）@2400-2500MHz 53.35%（均值）、57.00%（峰值）@5150-5850MHz 电压驻波比（VSWR）＜1.5 极化方式(Ploriaztion)线极化 辐射方向(Radiationpattern)全向 馈电阻抗(impedance)50Ω 天线尺寸(Overaldimensions)14.26x13mm 重量(Weight)＜2.0g 工作温度(OperatinTemp)-40°C~80°C 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第5页共8页 四、天线性能测试 1 、回波损耗 & 驻波比 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第6页共8页 3 、方向图（ 2D 及 3D 图） 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第7页共8页 4 、效率曲线图 5 、增益曲线图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第8页共8页 五、包装说明 第二步：预计2500PCS/箱（实际以出货为准） 第三步：内附出货检验报告， 在箱外侧面左上角贴标签，封口。 第一步：2PCS/格 96PCS/盘

Report No.: KSCR260100002402 Page: 1 of 164 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 TEST REPORT Application No.: KSCR2601000024AT FCC ID: 2BHGF-0235CC1A Applicant: KeyLife International Technology Limited Address of Applicant: Workshop 7, 6th Floor Core 45, No. 43 Tsun Yip Street, Kowloon, HONG KONG Manufacturer: KeyLife International Technology Limited Address of Manufacturer: Workshop 7, 6th Floor Core 45, No. 43 Tsun Yip Street, Kowloon, HONG KONG Equipment Under Test (EUT): EUT Name: Indoor Camera Model No.: P370A,P370A XXXX XXXX XXXX,P370A-XXXX-XXXX-XXXX (where X may be '0-9' 'A-Z' 'a-z' '-' or blank; '-' is option)   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-01-05 Date of Test: 2026-01-12 to 2026-02-02 Date of Issue: 2026-02-03 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: KSCR260100002402 Page: 2 of 164 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 Revision Record Version Description Date Remark 00 Original 2026-02-03 / Authorized for issue by: Tested By Maker Qi /Project Engineer Approved By Terry Hou /Reviewer Report No.: KSCR260100002402 Page: 3 of 164 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Custo mer Declar ation Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10 (2020) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2020) Section 11.10.3 & 11.10.5 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Declaration of EUT Family Grouping: There are series models mentioned in this report, and they are identical in electrical and electronic char acters. Only the model P370A was tested since their differences were the model number and appearance. Report No.: KSCR260100002402 Page: 4 of 164 CCSEM-TRF-001 Rev. 03 Dec 18, 2024 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 Test Summary ......................................................................................................................................... 3 3 Contents ................................................................................................................................................... 4 4 General Information ................................................................................................................................ 5 4.1 Details of E.U.T. ............................................................................................................................... 5 4.2 Description of Support Units ............................................................................................................ 5 4.3 Power level setting using in test ....................................................................................................... 5 4.4 Measurement Uncertainty ................................................................................................................ 6 4.5 Test Location .................................................................................................................................... 7 4.6 Test Facility ...................................................................................................................................... 7 4.7 Deviation from Standards ................................................................................................................. 7 4.8 Abnormalities from Standard Conditions .......................................................................................... 7 5 Equipment List ...............................................................................…

Text truncated - open the document above for the full version.