2BHHH-P42Tablet

FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged over one gram of this Device (FCC ID: 2BHHH-P42) has been tested against this SAR limit. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested for typical operations 0mm from the body. To maintain compliance with FCC RF exposure requirements, 0mm separation distance should. maintained to the user's bodies

Page: 1/11 Ref : ACR.163.3.25.BES.B Cancel and replace the report ACR.163.3.25.BES.A SHENZHEN LGT TEST SERVICE CO., LTD. ROOM 205, BUILDING 13, ZONE B, ZHENXIONG INDUSTRIAL PARK, NO.177, RENMIN WEST ROAD, JINSHA, KENGZI STREET, PINGSHAN DISTRICT, SHENZHEN, GUANGDONG, CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: 2225-EPGO-450 Calibrated at MVG Z.I. de la pointe du diable Technopôle Brest Iroise – 295 avenue Alexis de Rochon 29280 PLOUZANE - FRANCE Calibration date: 06/06/2025 Accreditations #2-6789 Scope available on www.cofrac.fr The use of the Cofrac brand and the accreditation references is prohibited from any reproduction. Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed at MVG, using the CALIPROBE test bench, for use with a MVG COMOSAR system only. The test results covered by accreditation are traceable to the International System of Units (SI). COMOSAR E-Field Probe Calibration Report Docusign Envelope ID: D3677F92-510E-48FC-B182-CD820765136E COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.163.3.25.BES.B Page: 2/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Pedro Ruiz Technical Manager 6/12/2025 Checked & approved by: Pedro Ruiz Technical Manager 6/12/2025 Authorized by: Kim Rutkowski Quality Manager Customer Name Distribution : SHENZHEN LGT TEST SERVICE CO., LTD. Issue Name Date Modifications A Pedro Ruiz 6/12/2025 Initial release B Pedro Ruiz 6/20/2025 Customer name & address Docusign Envelope ID: D3677F92-510E-48FC-B182-CD820765136E 6/23/2025 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.163.3.25.BES.B Page: 3/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Sensitivity _______________________________________________________________ 4 3.2 Linearity ________________________________________________________________ 5 3.3 Isotropy _________________________________________________________________ 5 3.4 Boundary Effect __________________________________________________________ 5 3.5 Probe Modulation Response _________________________________________________ 6 4 Measurement Uncertainty .......................................................................................... 6 5 Calibration Results ..................................................................................................... 6 5.1 Calibration in air __________________________________________________________ 6 5.2 Calibration in liquid _______________________________________________________ 7 6 Verification Results ................................................................................................... 8 7 List of Equipment .................................................................................................... 10 Docusign Envelope ID: D3677F92-510E-48FC-B182-CD820765136E COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.163.3.25.BES.B Page: 4/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number 2225-EPGO-450 Product Condition (new / used) New Frequency Range of Probe 0.15 GHz-7.5GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.226 M Dipole 2: R2=0.224 M Dipole 3: R3=0.229 M 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards. Figure 1 – MVG COMOSAR Dosimetric E field Probe Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their effect. All calibrations / measurements performed meet the fore-mentioned standards. 3.1 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards for frequency range 600- 7500MHz and using the calorimeter cell method (transfer method) as outlined in the standards for frequency 150-450 MHz. Docusign Envelope ID: D3677F92-510E-48FC-B182-CD820765136E COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.163.3.25.BES.B Page: 5/11 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it …

Text truncated - open the document above for the full version.

FCC ID_SAR Setup photos Body Back side (separation distance is 0mm) Body Left side (separation distance is 0mm) Body Right side (separation distance is 0mm) Body Top side (separation distance is 0mm) Body Bottom side (separation distance is 0mm)

Shenzhen DL Testing Technology Co., Ltd. EUT TEST PHOTO Radiated Measurement Photos Shenzhen DL Testing Technology Co., Ltd. Conducted Measurement Photos ※※※※※ END OF REPORT ※※※※※

Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260127041R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 33 FCC Part 15C Test Report FCC ID: 2BHHH-P42 Applicant: Shenzhen Pinjin Technology Co., Ltd. Address: Room 401, Building 7, Anhua Community, Shatou Street, Futian District, Shenzhen Manufacturer: Shenzhen Pinjin Technology Co., Ltd. Address: Room 401, Building 7, Anhua Community, Shatou Street, Futian District, Shenzhen Product Name: Tablet Trade Mark: MSEVC Model Number: P42, R16, Y3H, S25, S26,S25 Pro, S25 Ultra, S26 Pro, S26 Ultra, i17, i18 Date of Receipt: Jan. 27, 2026 Test Date: Jan. 27, 2026 - Mar. 13, 2026 Date of Report: Mar. 13, 2026 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China Applicable Standards: FCC PART 15 C 15.247 ANSI C63.10-2020+Cor.1-2023 Test Result: Pass Report Number: DLE-260127041R Prepared (Test Engineer): Alisa Song Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260127041R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 33 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 4 1.1 MEASUREMENT UNCERTAINTY 4 2 . GENERAL INFORMATION 5 2.1 GENERAL DESCRIPTION OF EUT 5 2.2 DESCRIPTION OF TEST MODES 6 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 6 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 7 2.5 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 7 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 8 3 . EMC EMISSION TEST 9 3.1 CONDUCTED EMISSION MEASUREMENT 9 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 9 3.1.2 TEST PROCEDURE 9 3.1.3 DEVIATION FROM TEST STANDARD 9 3.1.4 TEST SETUP 10 3.1.5 EUT OPERATING CONDITIONS 10 3.1.6 TEST RESULTS 10 3.2 RADIATED EMISSION MEASUREMENT 13 3.2.1 RADIATED EMISSION LIMITS 13 3.2.2 TEST PROCEDURE 14 3.2.3 DEVIATION FROM TEST STANDARD 14 3.2.4 TEST SETUP 14 3.2.5 EUT OPERATING CONDITIONS 15 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 16 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 17 3.2.8 TEST RESULTS (1GHZ~25GHZ) 19 3.3 RADIATED BAND EMISSION MEASUREMENT 23 3.3.1 TEST REQUIREMENT: 23 3.3.2 TEST PROCEDURE 23 3.3.3 DEVIATION FROM TEST STANDARD 23 3.3.4 TEST SETUP 24 3.3.5 EUT OPERATING CONDITIONS 24 3.4 CONDUCTED BAND EDGE EMISSION&CONDUCTED SPURIOUS EMISSIONS MEASUREMENT 29 3.4.1 APPLICABLE STANDARD 29 3.4.2 TEST PROCEDURE 29 3.4.3 DEVIATION FROM STANDARD 29 Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260127041R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 33 Table of Contents Page 3.4.4 TEST SETUP 29 3.4.5 EUT OPERATION CONDITIONS 29 3.4.6 TEST RESULTS 29 4 . AVERAGE OUTPUT POWER 30 4.1 APPLIED PROCEDURES / LIMIT 30 4.1.1 TEST PROCEDURE 30 4.1.2 DEVIATION FROM STANDARD 30 4.1.3 TEST SETUP 30 4.1.4 EUT OPERATION CONDITIONS 30 4.1.5 TEST RESULTS 30 5 . POWER SPECTRAL DENSITY TEST 31 5.1 APPLIED PROCEDURES / LIMIT 31 5.1.1 TEST PROCEDURE 31 5.1.2 DEVIATION FROM STANDARD 31 5.1.3 TEST SETUP 31 5.1.4 EUT OPERATION CONDITIONS 31 5.1.5 TEST RESULTS 31 6 . 6DB BANDWIDTH TEST 32 6.1 APPLIED PROCEDURES / LIMIT 32 6.1.1 TEST PROCEDURE 32 6.1.2 DEVIATION FROM STANDARD 32 6.1.3 TEST SETUP 32 6.1.4 EUT OPERATION CONDITIONS 32 6.1.5 TEST RESULTS 32 7 . ANTENNA REQUIREMENT 33 7.1 STANDARD REQUIREMENT 33 7.2 EUT ANTENNA 33 8 . TEST SEUUP PHOTO 33 9 . EUT PHOTO 33 Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260127041R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 33 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.205, 15.209, 15.247(d) Radiated Spurious Emission PASS 15.209, 15.205 Band Edge Emission PASS 15.247(d) Conducted Spurious Emissions PASS 15.247(b) Average Output Power PASS 15.247(a)(2) 6dB Bandwidth PASS 15.247(e) Power Spectral Density PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Test lab: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China FCC Test Firm Registration Number: 854456 Designation Number: CN1307 IC Registered No.: 27485 CAB ID.: CN0118 1.1 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±2.56dB 2 RF power,conducted ±0.42dB 3 Spurious emissions,conducted ±2.76dB 4 All emissions,radiated(<1G) ±3.65dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% 8 6dB Bandwidth ±0.2% 9 Power Spectral Density ±2.45dBm Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260127041R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 33 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product Name: Tablet Trade Mark: MSEVC Model Number: P42, R16, Y3H, S25, S26,S25 Pro, S25 Ultra, S26 Pro, S26 Ultra, i17, i18 Test Model: P42 Model Difference All models are same as the samples except model name and appearance color, they have the same structure and circuit. Operation Frequency: 2412~2462 MHz for 802.11b/g/nHT20 2422~2452 MHz for 802.11nHT40 Channel numbers: 11 Channels for 802.11b/g/n(HT20) 7 channels for 802.11nHT40 Channel separation: 5M…

Text truncated - open the document above for the full version.

Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260127039R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 27 FCC Part 15C Test Report FCC ID: 2BHHH-P42 Applicant: Shenzhen Pinjin Technology Co., Ltd. Address: Room 401, Building 7, Anhua Community, Shatou Street, Futian District, Shenzhen Manufacturer: Shenzhen Pinjin Technology Co., Ltd. Address: Room 401, Building 7, Anhua Community, Shatou Street, Futian District, Shenzhen Product Name: Tablet Trade Mark: MSEVC Model Number: P42, R16, Y3H, S25, S26,S25 Pro, S25 Ultra, S26 Pro, S26 Ultra, i17, i18 Date of Receipt: Jan. 27, 2026 Test Date: Jan. 27, 2026 - Mar. 13, 2026 Date of Report: Mar. 13, 2026 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China Applicable Standards: FCC PART 15 C 15.247 ANSI C63.10-2020+Cor.1-2023 Test Result: Pass Report Number: DLE-260127039R Prepared (Test Engineer): Alisa Song Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260127039R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 27 Table of Contents Page 1. . SUMMARY OF TEST RESULTS 4 1.1. MEASUREMENT UNCERTAINTY 4 2. . GENERAL INFORMATION 5 2.1. GENERAL DESCRIPTION OF EUT 5 2.2. DESCRIPTION OF TEST MODES 6 2.3. BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 6 2.4. DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 7 2.5. TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 7 2.6. EQUIPMENTS LIST FOR ALL TEST ITEMS 8 3. . EMC EMISSION TEST 9 3.1. CONDUCTED EMISSION MEASUREMENT 9 3.1.1. POWER LINE CONDUCTED EMISSION LIMITS 9 3.1.2. TEST PROCEDURE 9 3.1.3. DEVIATION FROM TEST STANDARD 9 3.1.4. TEST SETUP 10 3.1.5. EUT OPERATING CONDITIONS 10 3.1.6. TEST RESULTS 11 3.2. RADIATED EMISSION MEASUREMENT 13 3.2.1. RADIATED EMISSION LIMITS 13 3.2.2. TEST PROCEDURE 14 3.2.3. DEVIATION FROM TEST STANDARD 14 3.2.4. TEST SETUP 14 3.2.5. EUT OPERATING CONDITIONS 15 3.2.6. TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 16 3.2.7. TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 17 3.2.8. TEST RESULTS (1GHZ~25GHZ) 19 3.3 RADIATED BAND EMISSION MEASUREMENT 20 3.3.1 TEST REQUIREMENT: 20 3.3.2 TEST PROCEDURE 20 3.3.3 DEVIATION FROM TEST STANDARD 20 3.3.4 TEST SETUP 21 3.3.5 EUT OPERATING CONDITIONS 21 3.4 CONDUCTED BAND EDGE EMISSION&CONDUCTED SPURIOUS EMISSIONS MEASUREMENT 23 3.4.1 APPLICABLE STANDARD 23 3.4.2 TEST PROCEDURE 23 3.4.3 DEVIATION FROM STANDARD 23 3.4.4 TEST SETUP 23 Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260127039R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 27 Table of Contents Page 3.4.5 EUT OPERATION CONDITIONS 23 3.4.6 TEST RESULTS 23 4. . PEAK OUTPUT POWER 24 4.1. APPLIED PROCEDURES / LIMIT 24 4.1.1. TEST PROCEDURE 24 4.1.2. DEVIATION FROM STANDARD 24 4.1.3. TEST SETUP 24 4.1.4. EUT OPERATION CONDITIONS 24 4.1.5. TEST RESULTS 24 5. . POWER SPECTRAL DENSITY TEST 25 5.1. APPLIED PROCEDURES / LIMIT 25 5.1.1. TEST PROCEDURE 25 5.1.2. DEVIATION FROM STANDARD 25 5.1.3. TEST SETUP 25 5.1.4. EUT OPERATION CONDITIONS 25 5.1.5. TEST RESULTS 25 6. . 6DB BANDWIDTH TEST 26 6.1. APPLIED PROCEDURES / LIMIT 26 6.1.1. TEST PROCEDURE 26 6.1.2. DEVIATION FROM STANDARD 26 6.1.3. TEST SETUP 26 6.1.4. EUT OPERATION CONDITIONS 26 6.1.5. TEST RESULTS 26 7. . ANTENNA REQUIREMENT 27 7.1. STANDARD REQUIREMENT 27 7.2. EUT ANTENNA 27 8. . TEST SEUUP PHOTO 27 9. . EUT PHOTO 27 Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260127039R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 27 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.247(c) Radiated Spurious Emission PASS 15.205 Band Edge Emission PASS 15.247(b) Peak Output Power PASS 15.247(a)(2) 6dB Bandwidth PASS 15.247(e) Power Spectral Density PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Test lab: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China FCC Test Firm Registration Number: 854456 Designation Number: CN1307 IC Registered No.: 27485 CAB ID.: CN0118 1.1 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±2.56dB 2 RF power,conducted ±0.42dB 3 Spurious emissions,conducted ±2.76dB 4 All emissions,radiated(<1G) ±3.65dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% 8 6dB Bandwidth ±0.2MHz 9 Power Spectral Density ±0.3dBm Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260127039R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 27 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product Name: Tablet Trade Mark: MSEVC Model Number: P42, R16, Y3H, S25, S26,S25 Pro, S25 Ultra, S26 Pro, S26 Ultra, i17, i18 Test Model: P42 Model Difference: All models are same as the samples except model name and appearance color, they have the same structure and circuit. Operation Frequency: 2402~2480MHz Channel numbers: 40 Channels Channel separation: 1MHz Modulation technology: GFSK Antenna Type: Internal Antenna Antenna gain: 2.6 dBi Power supply: DC 5V from USB DC 3.7V…

Text truncated - open the document above for the full version.

contents APPROVAL SHEET CUST OMER: Antenna DISCRIP TION: 4G+GPS/WIFI+ M ODEL NO: 4 G95-1B143-A WBP700-1B185A FJ83-1B160B-A CUST OMER P/N: P30 CUST OMER MODEL: A nt type: 4G:PIFA,WIFI:PIFA DRADWN Q.C.DEPT FAE TESTED BY APPROVED BY CUSTOMER CUSTOMER Q.C.DEPT CUSTOMER FAE CUSTOMER TESTED BY CUSTOMER APPROVED BY Address: Room 211, Hengbo science and technology Industrial Park, Qingning road, Long hua District, Shenzhen Eteking Mount Cinenor Diversity Specification document 第2页- 1. Project information and Electrical Specification Those specifications were specially defined for 4G, and all characteristics were measured under the model’s handset testing jig . 1-1 Project picture 1-2 Frequency Band: Frequency Band MHz 4G 791-960/1710-2690 1-3 Impedance matching All matching devices on the RF circuit of DUT remain unchanged 2. VSWR 2-1 Measuring Method: 1. A 50Ωcoaxial cable is connected to the antenna. Then this cable is connected to a network analyzer to measure the VSWR, 2. Keeping this jig away from metal at least 20cm. The test diagram is as follows ： 第3页- 2-2 S11 parameter values-4G Fre（MHZ） 791 960 1710 2170 2690 VSWR 2.63 3.40 2.28 1.34 1.48 3. Efficiency and Gain *measuring and test instruments: Microwave anechoic chamber Agilent Microwave anechoic chamber 第4页- Spectrum analyzer Network analyzer Standard antenna *test method: 3-1 Efficiency/Gain- 2G&3G&4G Band& Peak Gain CE 2G 900: -0.6dbi 1800:1.2dbi 3G B1: 1.3dbi B8:-0.6dbi 4G B3:1.2dbi B7:1.4dbi B8:-0.6dbi B20:-1.2dbi B38:1.4dbi FCC 2G 850: -0.8dbi 1900: 1.2dbi 3G B2:1.2dbi B5:-0.8dbi 4G B2:1.2dbi B4:1.2dbi B5:-0.8dbi B12:-1.5dbi B17: -1.5dbi B41:1.4dbi 第5页- Efficiency/Gain- WIFI/BT BAND WIFI/BT Freq.[MHZ] 2400 2450 2500 5050 5450 5850 Eff.[%] 56.78 55.95 55.56 50.16 50.47 51.28 Gain [dBi] 2.6 2.4 2.1 0.5 0.5 0.6 第6页- 第7页- 第8页- 第9页- 3. Ictive test result-3D BAND GSM850 GSM900 Channel 128 190 251 975 37 124 3D TRP(dbm) 22.35 22.76 22.11 24.25 24.34 24.33 TIS(dbm) -99.18 -101.56 BAND DCS1800 PCS1900 Channel 512 698 885 512 661 810 3D TRP(dbm) 23.74 23.53 23.45 23.59 23.47 23.65 TIS(dbm) -101.89 -102.77 BAND WCDMA B1 FDD-LTE B1 Channel 10562 10700 10838 50 300 550 3D TRP(dbm) 17.26 17.15 17.34 17.34 17.18 17.25 TIS(dbm) -100.81 -86.55 BAND FDD-LTE B3 FDD -LTE B5 Channel 1250 1575 1900 20450 20525 20600 3D TRP(dbm) 15.48 15.86 15.80 16.56 16.37 15.98 TIS(dbm) -86.88 -86.53 BAND FDD-LTE B7 FDD-LTE B8 Channel 20800 21100 21400 3550 3621 3700 3D TRP(dbm) 16.13 16.74 16.55 15.63 15.56 15.47 TIS(dbm) -88.11 -87.79 BAND FDD-LTE B20 TDD-LTE B40 Channel 24200 24300 24400 38750 39150 39550 3D TRP(dbm) 13.20 13.32 13.65 16.24 16.20 16.15 TIS(dbm) -86.71 -89.77 BAND TDD-LTE B39 TDD-LTE B38 Channel 38350 38450 38550 37850 38000 38150 3D TRP(dbm) 18.63 18.56 18.47 18.13 18.78 18.62 TIS(dbm) -88.79 -89.05 第10页- 5The production index 6. In the mass production of antenna, the standing - wave ratio is used as the test standard 7. 8.根据项目本身的差异,给出如下标准According to the differences of the project itself, the 9.following standards are given： 10. Frequency（MHZ） Mass production standard (791-960/1710-2690) VSWR Mass production products <VSWR( Design sample)+ 0.5 第11页- 11.structural drawings 第12页- 第13页-

Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 52 ANNEX TEST DATA WIFI2.4G FCC ID: 2BHHH-P42 Applicant: Shenzhen Pinjin Technology Co., Ltd. Address: Room 401, Building 7, Anhua Community, Shatou Street, Futian District, Shenzhen Manufacturer: Shenzhen Pinjin Technology Co., Ltd. Address: Room 401, Building 7, Anhua Community, Shatou Street, Futian District, Shenzhen Product Name: Tablet Trade Mark: MSEVC Model Number: P42, R16, Y3H, S25, S26,S25 Pro, S25 Ultra, S26 Pro, S26 Ultra, i17, i18 Date of Receipt: Jan. 27, 2026 Test Date: Jan. 27, 2026 - Mar. 13, 2026 Date of Report: Mar. 13, 2026 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China Applicable Standards: FCC PART 15 C 15.247 ANSI C63.10-2020+Cor.1-2023 Test Result: Pass Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 52 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 802.11b SISO 2412 0.937 0.974 96.20 0.17 0.07 2437 0.937 0.974 96.20 0.17 0.03 2462 0.938 0.975 96.21 0.17 0.07 802.11g SISO 2412 0.177 0.220 80.45 0.94 0.09 2437 0.176 0.220 80.00 0.97 0.15 2462 0.178 0.220 80.91 0.92 0.12 802.11n (HT20) SISO 2412 1.301 1.345 96.73 0.14 0.07 2437 1.300 1.344 96.73 0.14 0.10 2462 1.301 1.344 96.80 0.14 0.10 802.11n (HT40) SISO 2422 0.649 0.693 93.65 0.28 0.07 2437 0.649 0.692 93.79 0.28 0.04 2452 0.648 0.692 93.64 0.29 0.07 Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 52 1.2 Test Graph 1.2.1 Ant1 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 52 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 52 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 6 of 52 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 7 of 52 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 8 of 52 802.11n(HT40)_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 9 of 52 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 1 12.954 / Pass 2437 1 12.583 / Pass 2462 1 13.289 / Pass 802.11g SISO 2412 1 16.604 / Pass 2437 1 16.466 / Pass 2462 1 16.786 / Pass 802.11n (HT20) SISO 2412 1 17.863 / Pass 2437 1 17.692 / Pass 2462 1 18.125 / Pass 802.11n (HT40) SISO 2422 1 37.262 / Pass 2437 1 35.987 / Pass 2452 1 36.470 / Pass 2.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 1 8.659 >=0.5 Pass 2437 1 7.783 >=0.5 Pass 2462 1 8.678 >=0.5 Pass 802.11g SISO 2412 1 15.901 >=0.5 Pass 2437 1 15.854 >=0.5 Pass 2462 1 16.452 >=0.5 Pass 802.11n (HT20) SISO 2412 1 17.231 >=0.5 Pass 2437 1 15.967 >=0.5 Pass 2462 1 17.560 >=0.5 Pass 802.11n (HT40) SISO 2422 1 36.854 >=0.5 Pass 2437 1 27.951 >=0.5 Pass 2452 1 35.476 >=0.5 Pass Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 10 of 52 2.2 Test Graph 2.2.1 OBW 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 11 of 52 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 12 of 52 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 13 of 52 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 14 of 52 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 15 of 52 802.11n(HT40)_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 16 of 52 2.2.2 6dB BW 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 17 of 52 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 18 of 52 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 19 of 52 802.11n(HT20)_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 20 of 52 802.11n(HT20)_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 21 of 52 802.11n(HT40)_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (SISO)_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 22 of 52 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Mode TX Type Frequency (MHz) Maximum Average Cond…

Text truncated - open the document above for the full version.

Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 21 ANNEX TEST DATA FCC ID: 2BHHH-P42 Applicant: Shenzhen Pinjin Technology Co., Ltd. Address: Room 401, Building 7, Anhua Community, Shatou Street, Futian District, Shenzhen Manufacturer: Shenzhen Pinjin Technology Co., Ltd. Address: Room 401, Building 7, Anhua Community, Shatou Street, Futian District, Shenzhen Product Name: Tablet Trade Mark: MSEVC Model Number: P42, R16, Y3H, S25, S26,S25 Pro, S25 Ultra, S26 Pro, S26 Ultra, i17, i18 Date of Receipt: Jan. 27, 2026 Test Date: Jan. 27, 2026 - Mar. 13, 2026 Date of Report: Mar. 13, 2026 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China Applicable Standards: FCC PART 15 C 15.247 ANSI C63.10-2020+Cor.1-2023 Test Result: Pass Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 21 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 1M SISO 2402 2.159 2.501 86.33 0.64 0.03 2440 2.159 2.501 86.33 0.64 0.03 2480 2.159 2.500 86.36 0.64 0.03 Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 3 of 21 1.2 Test Graph 1.2.1 Ant1 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 4 of 21 1M_HCH_2480MHz_Ant1_NTNV Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 5 of 21 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 1.039 / Pass 2440 1 1.042 / Pass 2480 1 1.042 / Pass 2.1.2 6dB BW Mode T…

Text truncated - open the document above for the full version.