2BKL8-201AAsset Tag

I.JNIT=D SOLUT roNs AMERTCAN CERTTFTCATTON BODY rNC 313 PARKAVENUE SUITE 3OO To Whom lt May Concern Statement for 47 GFR section 2.911(dXSXi) United Mesh Solutions certifies that as of the date of the application the equipment for which authorization is sought is not "covered" equipmentl prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. lf the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not "covered" equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(dX5Xii) United Mesh Solutions ("the applicant") certifies that, as of the date of the filing of this application, the applicant ! - is / EI - is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates - see KDB 986446 Question 5) as an entity producing "covered" equipment. Thank you, By: David G. Evans (Signatu re2) (Print name) Title:Chief Technoloqv Officer Company:United Mesh Solutions Telephone 703-568-7612 1- The Commission's Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission's website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes "covered" equipment. https://www.fcc.gov/supplvchain/coveredlist . 2 - Letters must be placed on appropriate letterhead. Page 1 of 1 FALLS CHURCH, VA22046 Date

I IJ S I I L N o =D UT roNs AMERICAN CERTIFICATION BODY INC 313 PARKAVENUE SUITE 3OO FALLS CHURCH, VA22O46 ATTENTION: FCC Certification - Section 2.911(dX7) lnformation This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(dX7). TheApplicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Sincerely, Applicant Company name: United Mesh Solutions Grantee Code: 2BKl8 FRN #: 0035855360 Contact Name: David G. Evans Street Address: 1 5021 Barlow Dr City/Provin celZip. Waterford, VA 20197, USA Telephone No: 703.568.7612 Email: [email protected] AA$u4'/'' Applicant Signaturel: r f zlz< Date: Signed by (Printed Name/Title): David G. Evans / Chief Technology Officer 1 - Letters must be placed on appropriate letterhead. The signee for the applicant must be one of the following: Applicant (grantee) contact of record in the FCC's authorization system, or authorized ofiicers or employee of the applicant (grantee). Page 1 of 1

tJN - I I L =D UT SO toNs Date: August 8, 2025 Subject: Confidentiality Request for: 2BKI8-2O I A Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit n Short Term E Permanent Block Diagrams External Photos lnternal Photos Operation Description/Theory of Operation Parts List & PlacemenYBOM Tune-Up Procedure Schematics Test Setup Photos User's Manual United Solutionshas spent substantial effort in developing this product and it is one ofthe E Short Term X Short Term n Short Term D Short Term n Short Term fl Short Term X Short Term E Short Term n Permanent *l E Permanent n Permanent I Permanent X Permanent n Permanent *3 financial hardship Permanent Confi dentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications: The applicant requests the exhibits selected above as short term confidential be withheld from public view for u p"riod of 180 2 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then ielease the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Short Term Confidentiality for Industry Canada Applications: Starting May 2022,ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until ISED first of its kind in industry. Having the subject information advantage they have achieved by developing this product. N easily available to "competition" would negate the ot protecting the details of the design will result in David Evans Sincerely, By: / CTO (Signature/Title3) (Print narne) 1- Theasteriskeditems(.)requirefurtherinformationtobeprovidedtoACBbeforepermanentconfidentialitywillbeextendedb these exhibits. Piease refer to FCC KDB 726920 and the specific Document link for D01 found at https:l/apps.fcc.gov/oetcf/kdb/formslFTSSearchResultPaqe.cfm?switch=P&id=41731 and review section ll, 3) regading specific information that must accompany these requests. 2 - Please refer to https://acbcert.comldocuments/miscdocs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for com pleb details. 3 -MustbesignedbyapplicantcontactgivenforapplicantontheFCCsite,orbytheauthorizedagentifanappropriateauthorized agent lefter has been provided. Letters should be placed on appropriate letterhead. Page 1 of 1

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Authoritv to Act as Aeent Date: November 13,2024 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: Kimberly Colbert/Washington Laboratories is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body,Inc. (ACB). We certiff that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1 .2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: 12 months M r.r/ By David Evans (Signaturer) (Print name) Title Chief Techno losv Officer On behalf of: Uni Solutions (Company Name) Teleohone: 703-568-7612 I - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent ifan appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead' os0222-L7

Page 1 of 1 Label & Label Location of Tag ID Label Material: Thermal transfer, acrylic label with a high-performance permanent acrylic adhesive Sincerely, David G Evans CTO, United Mesh Solutions, LLC [email protected] MATERIALS SPEC SHEET Z-Endure™4000T Z-Endure™4000T All products should be pre-tested to ensure it meets all intended requirements of specific end-use applications. For more information, visit www.zebra.com/supplies Product Performance and Suitability: The information contained in this document is to be used for guidance only and is not intended for use in setting specifications. All purchasers of Zebra products shall be solely responsible for independently determining if the product conforms to all requirements of their unique application. NA and Corporate Headquarters | +1 800 423 0442 | [email protected] ©2018 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. FEATURES • Thermal transfer, acrylic label with a permanent acrylic adhesive • Excellent smear/scratch resistance • Excellent durability and chemical resistance • Special acrylic film offers 10 year outdoor durability • Available in white (05827RM) MATERIAL CONSTRUCTION Component Description Caliper Facestock White coated acrylic film 2.0 mil Adhesive Permanent, acrylic- based 0.8 mil Liner 50 lb. semi-bleached, kraft stock 3.2 mil TOTAL ± 10% 6.0 mil ADHESIVE STRENGTH TEMPERATURE PERFORMANCE Minimum Application Temperature Service Temperature Optimal Storage Conditions 50° F (10° C) -40° F to 212° F (-40° C to 100° C) 72° F (22° C) at 50% RH Expected Exterior Life 10 years CHEMICAL RESISTANCE Suggested Ribbon Chemical 6200 5095 5100 Weak Blood ⚫ ⚫ ⚫ Body Fluid ⚫ ⚫ ⚫ Salt Water ⚫ ⚫ ⚫ Water ⚫ ⚫ ⚫ Window Cleaner ⚫ ⚫ ⚫ Moderate Alcohol ⚫ ⚫ ⚫ Ammonia ⚫ ⚫ ⚫ Bleach ⚫ ⚫ ⚫ IPA ⚫ ⚫ ⚫ Harsh Gasoline ⚫ ⚫ ⚫ Grease ⚫ ⚫ ⚫ Oil ⚫ ⚫ ⚫ Extreme Acetone NR NR NR IR Reflow NR NR NR MEK NR NR NR TCE NR NR NR Xylene NR NR NR SUGGESTED APPLICATIONS • Outdoor tools/ equipment ⚫ Recommended ⚫ Test in Your Application NR Not Recommended MATERIALS SPEC SHEET Z-Endure™4000T Z-Endure™4000T All products should be pre-tested to ensure it meets all intended requirements of specific end-use applications. For more information, visit www.zebra.com/supplies Product Performance and Suitability: The information contained in this document is to be used for guidance only and is not intended for use in setting specifications. All purchasers of Zebra products shall be solely responsible for independently determining if the product conforms to all requirements of their unique application. NA and Corporate Headquarters | +1 800 423 0442 | [email protected] ©2018 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. QUV Weathering Machine Testing Samples were printed with Zebra 5095 and 5100 ribbons and applied to aluminum panels at room temperature. Samples were subjected to QUV Weathering Machine Cycles which alternate between 8 hours UV at 60ºC, 4 hours condensation at 50ºC. After simulating 10 years* of outdoor exposure, the following results were noted. *One year of Southern Florida exposure is approximated by 1000 hours in the QUV with above cycles. Adhesive Durability Facestock Appearance Print Quality Facestock Degradation (Chalking, cracking, shrinkage, etc.) No Change No Change No Change None observed at 5,000 hours. Very slight chalking at 10,000 hours. MATERIALS SPEC SHEET 5095 PERFORMANCE RESIN RIBBON 5095 Performance Resin Ribbon Product Performance and Suitability: The information contained in this document is to be used for guidance only and is not intended for use in setting specifications. All purchasers of Zebra products shall be solely responsible for independently determining if the product conforms to all requirements of their unique application. NA and Corporate Headquarters | +1 800 423 0442 | [email protected] ©2018 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. For more information, visit www.zebra.com/supplies Our performance resin ribbon formulation produces images resistant to most harsh environments: smearing, moisture, abrasion, extreme temperature and chemicals when printed on Zebra ® synthetic label and tag materials. UL/ cUL Certifications with the following materials: • Z-Supreme 2000T (UL, cUL) • Z-Supreme 4000T (UL, cUL) • Z-Ultimate® 4000T White & Silver (UL, cUL) • Z--Ultimate® 4000T Removable (UL, cUL) • Z--Ultimate® 4000T High-Tack (UL, cUL) • Z--Ultimate® 3000T White & Silver (UL, cUL) • Z-Ultimate® 2000T White (UL, cUL) • Z-Xtreme 4000T White & Silver (UL, cUL) • Z-Xtreme 4000T High-Tack White & Silver (UL, cUL • Z-Xtreme 2000T White, Silver & Clear (UL, cUL) • 8000T Void Matte (UL, cUL) TECHNICAL SPECIFICATIONS Attribute Specification Color Black Ink Formulation Resin Base Film Polyester Base Film Caliper 4.5 microns Total Caliper 6.5 microns ± 10% Scanning Capabilities IR and Visible Light Recommended Storage Conditions: 72° F (22° C) at 50% RH Shelf Life 1 year For testing of this product, please order sample ribbon 05095BK08305. SUGGESTED APPLICATIONS • Labels which are repeatedly wand- scanned • Shelf and scan-pallet labels • Labels subject to abrasion or friction • Outdoor labeling applications in extreme environments • Chemical drum labeling applications • Labels exposed to water, steam, alkali or acid solutions

ABRACON IS ISO9001-2015 CERTIFIED REVISED: 03-26-24 www.abracon.com WLAN Ceramic Chip Antenna 2450MHz AMCA31-2R450G-S1F-T3 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Features • Miniaturized in size: 3.2 x 1.6 x 1.2 mm • Compact & Low-Profile • Low return loss of: ≤ -12.5 dB • Peak Gain: 2.3 dBi • Efficiency: ≥ -1.8 dB (66%) • Linear Polarization • Surface Mount (SMD) Applications • WiFi 2.4GHz • Bluetooth / BLE • ZigBee • ISM • IoT, M2M • Wearables • Wireless Remote Control • Personal Area Networks (PAN) • Industrial/Commercial equipment Product Image ABRACON IS ISO9001-2015 CERTIFIED REVISED: 03-26-24 www.abracon.com WLAN Ceramic Chip Antenna 2450MHz AMCA31-2R450G-S1F-T3 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Electrical Specification Note: All measurements were conducted on the evaluation board in free space. Performance will vary depending on the ground plane, application, and environment. Mechanical Specification Environmental Specification Parameter Specification Unit Operating Frequency 2400 - 2500 MHz Return Loss ≤ -12.5 dB Polarization Linear - Peak Gain 2.3 dBi Efficiency ≥ -1.8 (66) dB (%) Impedance 50 Ω Radiation Pattern Omni-directional - Input Power < 3 W Parameter Specification Antenna Dimension 3.2 x 1.6 x 1.2 mm Evaluation board Dimension 44 x 20 mm Recommended Ground Clearance for Antenna 6.5 x 6.5 mm Mounting Type Surface Mount Material(s) Ceramic Parameter Specification Operating and Storage Temperature (individual chip without packing) -40⁰C to +85⁰C Packaging Storage Temperature -10⁰C to +40⁰C Packaging Storage Relative Humidity 70% (Max.) ABRACON IS ISO9001-2015 CERTIFIED REVISED: 03-26-24 www.abracon.com WLAN Ceramic Chip Antenna 2450MHz AMCA31-2R450G-S1F-T3 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Product Dimensions and Terminal Configuration Unit: Inches [mm] Symbol Description  Antenna Feed  NC (not connected) M Mark ABRACON IS ISO9001-2015 CERTIFIED REVISED: 03-26-24 www.abracon.com WLAN Ceramic Chip Antenna 2450MHz AMCA31-2R450G-S1F-T3 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Recommended PCB layout If there are several layers in the PCB, there is an advantage to add vias for smooth interconnection of the ground areas to avoid splits in the ground plane. It is also important that the ground clearance is respected through all layers of the PCB. It is recommended to implement a matching network to optimize the antenna impedance in your application. The transmission line should be kept as short as possible and be designed to have a characteristic impedance of 50Ω. Detailed view of antenna pads and copper clearance: Unit: mm ABRACON IS ISO9001-2015 CERTIFIED REVISED: 03-26-24 www.abracon.com WLAN Ceramic Chip Antenna 2450MHz AMCA31-2R450G-S1F-T3 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Measurement Setup The antenna measurements were all done in free space, with the chip antenna implemented on its evaluation board (AMCA31-2R450G-S1F-T3-EVB) that has a PCB size of 44 by 20 (X by Y) mm: Reflection Characteristics – Return Loss ABRACON IS ISO9001-2015 CERTIFIED REVISED: 03-26-24 www.abracon.com WLAN Ceramic Chip Antenna 2450MHz AMCA31-2R450G-S1F-T3 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Radiation Characteristics – Total Efficiency (dB) Radiation Characteristics – Total Efficiency (%) ABRACON IS ISO9001-2015 CERTIFIED REVISED: 03-26-24 www.abracon.com WLAN Ceramic Chip Antenna 2450MHz AMCA31-2R450G-S1F-T3 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Radiation Characteristics – Maximum Gain Radiation Characteristics – 3D Pattern @ 2450 MHz Unit: dBi ABRACON IS ISO9001-2015 CERTIFIED REVISED: 03-26-24 www.abracon.com WLAN Ceramic Chip Antenna 2450MHz AMCA31-2R450G-S1F-T3 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Radiation Characteristics – 2D Pattern @ 2450 MHz XY-plane: XZ-plane: YZ-plane: VP: Vertical Polarization HP: Horizontal Polarization Unit: dBi ABRACON IS ISO9001-2015 CERTIFIED REVISED: 03-26-24 www.abracon.com WLAN Ceramic Chip Antenna 2450MHz AMCA31-2R450G-S1F-T3 3.2 x 1.6 x 1.2 mm RoHS/RoHS II Compliant MSL Level = 1 Request Samples Check Inventory 5101 Hidden Creek Ln Spicewood TX 78669 Phone: 512-371-6159 | Fax: 512-351-8858 For terms and conditions of sales, please visit: Evaluation Board Outline & Matching Circuit The evaluation board (AMCA31-2R450G-S1F-T3-EVB) is developed to simplify antenna testing and evaluation. It has an arbitrary size of 44 x 20 mm and includes an SMA connector. The purpose is to give a reference design for an optimal antenna implementation. The evaluation board can also be used to test other implementations by cutting and soldering the PCB into any devi…

Text truncated - open the document above for the full version.

MPE TEST REPORT for the UNITED MESH SOLUTIONS FCC ID: 2BKI8-201A WLL REPORT# 18554-01 REV 1 Prepared for: United Mesh Solutions 15021 Barlow Drive Waterford, Virginia 20197 Prepared By: Washington Laboratories, Ltd. 4840 Winchester Boulevard. Suite #5 Frederick, Maryland 21703 Testing Certificate AT-1448 Certificates and reports shall not be reproduced except in full, without the written permission of Washington Laboratories, Ltd United Mesh Solutions GPS Tag Series 200 MPE Test Report WLL Report 18554-01 Rev 1 Page-2 of 11 MPE Test Report for the United Mesh Solutions GPS Tag Series 200 FCC ID: 2BKI8-201A September 26, 2024 WLL Report# 18554-01 Rev 1 Prepared by: ___________________________ Ryan Mascaro RF Test Engineer Reviewed by: ____________________________ Steven D. Koster President United Mesh Solutions GPS Tag Series 200 MPE Test Report WLL Report 18554-01 Rev 1 Page-3 of 11 Abstract This report has been prepared on behalf of United Mesh Solutions to document the findings of the maximum permissible exposure evaluation on the United Mesh Solutions GPS Tag Series 200. The information provided in this report is only applicable to the device herein documented, as the EUT. The purpose of this evaluation is to establish a minimum safe distance as per the RF exposure requirements as defined in FCC §1.1307 & §1.1310. This report documents the results of testing to the requirements of: • CFR Title 47 Volume 1 Practice and Procedure; (1.1307) Environmental Assessments This evaluation was performed by Washington Laboratories, Ltd, 4840 Winchester Blvd., Suite 5, Frederick, MD 21703. Washington Laboratories, Ltd. has been accepted as an EMC Conformity Assessment Body (CAB) under the United States/European Union Memorandum of Agreement. Washington Laboratories, Ltd. has been accepted by the FCC and approved by ANAB under Testing Certificate AT-1448 as an independent FCC test laboratory. Revision History Description of Change Issue Date Rev 0 Initial Release September 26, 2024 Rev 1 ACB Comments; dated: 3/13/2025 March 14, 2025 United Mesh Solutions GPS Tag Series 200 MPE Test Report WLL Report 18554-01 Rev 1 Page-4 of 11 Table of Contents Abstract ...................................................................................................................................................... iii Table of Contents ....................................................................................................................................... iv 1 Introduction ......................................................................................................................................5 2 Requirements ...................................................................................................................................5 Transmitter Categories ................................................................................................................ 5 2.1.1 Fixed Installations ................................................................................................................... 5 2.1.2 Mobile Devices ....................................................................................................................... 5 2.1.3 Portable Devices ..................................................................................................................... 6 Exposure Categories ................................................................................................................... 6 2.2.1 Occupational/Controlled Exposure ..................................................................................... 6 2.2.2 General Population/Uncontrolled Exposure ....................................................................... 6 3 Device Summary ..............................................................................................................................9 4 Radio Frequency Radiation Exposure Evaluation .........................................................................10 List of Tables Table 1: MPE Limits (FCC) ....................................................................................................................... 7 Table 2: MPE Limits (ISED) ...................................................................................................................... 8 Table 3: Device Summary, GPS Tag Series 200 ........................................................................................ 9 Table 4: Transmitter MPE Calculation Summary (FCC) ......................................................................... 11 United Mesh Solutions GPS Tag Series 200 MPE Test Report WLL Report 18554-01 Rev 1 Page-5 of 11 1 Introduction This report has been prepared on behalf of United Mesh Solutions for the GPS Tag Series 200 (2.4GHz ISM transmitter) to show compliance with the RF exposure requirements as defined in FCC §1.1307 & §1.1310. The testing in-support of this evaluation was performed by Washington Laboratories, Ltd. Located at: 4840 Winchester Blvd., Suite #5. Frederick, Maryland 21703 (USA). Washington Laboratories, Ltd. has been accepted as an EMC Conformity Assessment Body (CAB) under the United States/European Union Memorandum of Agreement. Washington Laboratories, Ltd. is accredited with ANAB under Testing Certificate AT-1448. 2 Requirements Transmitter Categories 2.1.1 Fixed Installations A fixed location means that the device, including its antenna, is physically secured at a permanent location and is not able to be easily moved to another location. Additionally, distance to humans from the antenna is maintained to at least 2 meters. 2.1.2 Mobile Devices A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to be generally used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structures and the body of the user or nearby persons. Transmitters designed to be used by c…

Text truncated - open the document above for the full version.

FCC & ISED CANADA CERTIFICATION TEST REPORT for the GPS TAG SERIES 200 FCC ID: 2BKI8-201A WLL REPORT# 18852-01 REV 2 Prepared for: United Mesh Solutions 15021 Barlow Drive Waterford, Virginia 20197 Prepared By: Washington Laboratories, Ltd. 4840 Winchester Blvd. Suite 5 Frederick, Maryland 21703 Testing Certificate AT-1448 Certificates and reports shall not be reproduced except in full, without the written permission of Washington Laboratories, Ltd United Mesh Solutions GPS Tag Series 200 FCC Certification Test Report WLL Report 18852-01 Rev 2 Page 2 of 45 FCC & ISED Canada Certification Test Report for the United Mesh Solutions GPS Tag Series 200 FCC ID: 2BKI8-201A September 25, 2024 WLL Report# 18852-01 Rev 2 Prepared by: ___________________________ Ryan Mascaro RF Test Engineer Reviewed by: ____________________________ Steven D. Koster President United Mesh Solutions GPS Tag Series 200 FCC Certification Test Report WLL Report 18852-01 Rev 2 Page 3 of 45 Abstract This report has been prepared on behalf of United Mesh Solutions to support the attached Application for Equipment Authorization. The test report and application are submitted for a Digital Transmission System (DTS) transmitter under Part 15.247 of the FCC Rules and Regulations (current at the time of testing). This certification test report documents the test configuration and test results for the United Mesh Solutions, GPS Tag Series 200. The information provided in this report is only applicable to device herein documented as the EUT. Radiated testing was performed on the Open Area Test Site (OATS) of Washington Laboratories, Ltd., located at: 4840 Winchester Boulevard, Suite #5., Frederick, MD 21703. Site description and site attenuation data have been placed on file with the FCC's Sampling and Measurements Branch at the FCC laboratory in Columbia, MD. Washington Laboratories, Ltd. has been accepted by the FCC and approved by ANAB under Certificate AT-1448 as an independent FCC test laboratory. The United Mesh Solutions, GPS Tag Series 200 complies with the requirements for a Digital Transmission System (DTS) transmitter device under FCC Part 15.247. Revision History Description of Change Date Rev 0 Initial Release September 25, 2024 Rev 1 ACB Comments; dated: 3/13/2025 March 14, 2025 Rev 2 Confidential Details Removed August 11, 2025 United Mesh Solutions GPS Tag Series 200 FCC Certification Test Report WLL Report 18852-01 Rev 2 Page 4 of 45 Table of Contents Abstract ...................................................................................................................................................... iii Table of Contents ....................................................................................................................................... iv List of Tables .............................................................................................................................................. v List of Figures ............................................................................................................................................ vi 1 Introduction ..................................................................................................................................... 7 Compliance Statement ................................................................................................................ 7 Test Scope ................................................................................................................................... 7 Contract Information ................................................................................................................... 7 Test and Support Personnel ........................................................................................................ 7 Test Location .............................................................................................................................. 7 2 Equipment Under Test .................................................................................................................... 8 EUT Identification ...................................................................................................................... 8 EUT Description ......................................................................................................................... 9 Test Configuration and Algorithm .............................................................................................. 9 Customer Supplied Data or EUT Information ............................................................................ 9 Equipment Configuration.......................................................................................................... 10 3 Test Results ......................................…

Text truncated - open the document above for the full version.