2BLLH-AT2LITEFJDynamics AT2 Lite Auto Steer System

FJDynamics FJDynamics AT2 Lite Auto Steer System Hardware Installation Manual FJDynamics AT2 Lite Auto Steer System Hardware Installation Manual Copyright Notice: The copyright of this manual is owned by FJDynamics. Reproduction and duplication of whole or part of the content without permission of the company are strictly prohibited.This manual is subject to update without notice Read Before Installation: Disclaimer ·The purchased products,services,and features are stipulated by the contract.All or part of the products,services,and features described in this manual may not be within the scope of your purchase or usage.Unless otherwise specified in the contract,all the content in this manual is provided "AS IS" without warranties of any kind,express or implied. ·The content of this manual is subject to change due to product upgrades and other reasons. FJDynamics reserves the right to modify the content of this manua without prior notice. ·This manual only provides guidance for use of this product.Every effort has been made in the preparation of this manual to ensure accuracy of the content,but no informaton in this manual constitutes a warranty of any kind,express or implied. ©FJDynamics. All rights reserved. Follow this manual for installation. Improper installation may cause machine damage and poor performance. If you have any questions during installation,contact our customer service. FJDynamics AT2 Lite Auto Steer System Hardware Installation Manual Preface Thank you for purchasing FJDynamcis product.This manual provides detailed hardware installation guide.If you have any questions,contact the local Purpose and Intended Users This manual introduces the physical characteristics,installation procedures,and technical specifications of the product as wellas the specifications and use of the wiring harnesses and connectors.Based on the assumption that the users are familiar with the terms and concepts related to this product,this manual is intended for users who have read the preceding content and have experience in hardware installation and maintenance. Technical Support ·FJDynamics'offical website:https:/www.fjdynamics.com/ ·FJDynamics'customer service:[email protected] ©FJDynamics. All rights reserved. FJDynamics AT2 Lite Auto Steer System Hardware Installation Manual Content 1 Product Introduction..................................................................................................... 1 2 Preparation Before Installation ..................................................................................... 1 2.1 Safety Instructions ................................................................................................... 1 2.2 Installation Requirements .......................................................................................... 2 2.3 Installation Tools ..................................................................................................... 3 2.4 Unpacking and Inspection ......................................................................................... 4 3 Inspection .................................................................................................................. 5 3.1 Inspection Before Installation ........................................................................................ 5 3.2 Precautions ............................................................................................................. 6 4 Installation ................................................................................................................. 6 4.1 Installing the Electric Steering Wheel ............................................................ 6 4.2 Installing the GNSS Receiver ................................................................................... 9 4.3 Installing the Angle Sensor ....................................................................................... 10 4.4 Installing the Radio Antenna .................................................................................. 11 4.5 Installing the Terminal ........................................................................................... 12 4.6 Installing the SIM Card ........................................................................................ 14 4.7 Installing Wiring Harness ........................................................................................ 15 5 System Commissioning ............................................................................................. 16 5.1 Site Requirements ................................................................................................ 16 5.2 Power-on ............................................................................................................. 16 5.3 Parameter Calibration ........................................................................................ 16 6 Appendix .................................................................................................................. 17 6.1 Specifications ......................................................................................................... 17 ©FJDynamics. All rights reserved. FJDynamics AT2 Lite Auto Steer system Hardware Installation Manual 1 Product Introduction FJ Dynamics AT2 Lite Auto Steer System is an autosteering system that is launched by FJ Dynamics for agricultural machinery and supports assisted straightline driving.The system consists of the control terminal,GNSS receiver,electric steering wheel,and wiring harnesses.The contro terminal runs the software developed by FJ Dynamics. 2 Preparation Before Installation 2.1 Safety Instructions Before installation,read the safety advice in this manual carefully to avoid doing harm to people and equipment. Note that the following safety advice cannot cover allpossible dangerous situations. 2.1.1 Installation ·Do not install and commission the equipment in environments with high temperature,heavy dust,harmful gases,…

Text truncated - open the document above for the full version.

FJDynamicsTechnologyAcademy(Changzhou)Co.,Ltd.ShenzhenBranch Room501,Building13,NangangSecondIndustrialPark,NanshanDistrict,Shenzhen,China AttestationStatements NotCoveredEntityApplicant&NotCoveredEquipment To:FederalCommunicationsCommissionDate:Jan.6,2026 7435OaklandMillsRoad, Columbia,MD21046,USA Ref:InformationRequiredbySection2.911(d)(5)(i)&(ii) FCCID:2BLLH-AT2LITE FJDynamicsTechnologyAcademy(Changzhou)Co.,Ltd.ShenzhenBranch(“theapplicant”)certifies that,asofthedateofthefilingoftheapplication,theapplicantisnotidentifiedontheCoveredList, establishedpursuantto§1.50002ofreferencechapter,asanentityproducing“covered” communicationequipment.Theequipmentforwhichauthorizationissoughtisnot“covered” telecommunicationsequipmentandvideosurveillanceequipmentproducedbyentitiesidentifiedonthe Commission’sCoveredListthatprohibitedfromreceivinganequipmentauthorizationpursuantto section§2.903oftheFCCrules. Sincerelyyours, ApplicantSignature PrintedName:KateLiu Title:CertificationEngineer Address:Room501,Building13,NangangSecondIndustrialPark,NanshanDistrict,Shenzhen,China Tel.:15013739372 Email:[email protected]

FJDynamicsTechnologyAcademy(Changzhou)Co.,Ltd.ShenzhenBranch Room501,Building13,NangangSecondIndustrialPark,NanshanDistrict,Shenzhen,China AttestationStatements NotCoveredEntityApplicant&NotCoveredEquipment To:FederalCommunicationsCommissionDate:Jan.6,2026 7435OaklandMillsRoad, Columbia,MD21046,USA Ref:InformationRequiredbySection2.911(d)(5)(i)&(ii) FCCID:2BLLH-AT2LITE FJDynamicsTechnologyAcademy(Changzhou)Co.,Ltd.ShenzhenBranch(“theapplicant”)certifies that,asofthedateofthefilingoftheapplication,theapplicantisnotidentifiedontheCoveredList, establishedpursuantto§1.50002ofreferencechapter,asanentityproducing“covered” communicationequipment.Theequipmentforwhichauthorizationissoughtisnot“covered” telecommunicationsequipmentandvideosurveillanceequipmentproducedbyentitiesidentifiedonthe Commission’sCoveredListthatprohibitedfromreceivinganequipmentauthorizationpursuantto section§2.903oftheFCCrules. Sincerelyyours, ApplicantSignature PrintedName:KateLiu Title:CertificationEngineer Address:Room501,Building13,NangangSecondIndustrialPark,NanshanDistrict,Shenzhen,China Tel.:15013739372 Email:[email protected]

FJDynamicsTechnologyAcademy(Changzhou)Co.,Ltd.ShenzhenBranch Room501,Building13,NangangSecondIndustrialPark,NanshanDistrict,Shenzhen,China Date:Jan.6,2026 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 FCCID:2BLLH-AT2LITE USAgent–AttestationStatement/Part2.911(d)(7) [FJDynamicsTechnologyAcademy(Changzhou)Co.,Ltd.ShenzhenBranch]certifies,thatasof [Jan.6,2026],wehavedesignatedFCCUSAgent,LLCtoacceptserviceofprocessonour behalfforFCCID:2BLLH-AT2LITE. [FJDynamicsTechnologyAcademy(Changzhou)Co.,Ltd.ShenzhenBranch.],acceptsto maintainanagentofserviceofprocessintheUnitedStatesfornolessthanoneyearaftereither thegranteehaspermanentlyterminatedallmarketingandimportationoftheapplicableequipment withintheU.S.,ortheconclusionofanyCommission-relatedadministrativeorjudicialproceeding involvingtheequipment,whicheverislater. FCCUSAgent,LLC,acceptsasofthedateofthefilingofthisapplication,theobligationofbeing thedesignatedagentforthepurposeofacceptingserviceofprocessonbehalfof[FJDynamics TechnologyAcademy(Changzhou)Co.,Ltd.ShenzhenBranch]forFCCID:2BLLH-AT2LITE. DesignatedAgentInformation: CompanyName:FCCUSAgent,LLC FRN:0033402884 Address:3722IllinoisAvenue,SaintCharles,IL,60174,USA ContactPerson:TimPayne Phone:708-571-3148 Email:[email protected] Sincerely, Company:FJDynamicsTechnologyAcademy (Changzhou)Co.,Ltd.ShenzhenBranch DesignatedAgent:FCCUSAgent,LLC CompanyRepresentative:KateLiu FRN:0036093987 Tel:15013739372 Email:[email protected] DesignatedAgentRepresentative:TimPayne Signature:Signature:

FJ Dynamics Technology Academy (Changzhou) Co., Ltd. Shenzhen Branch Room 501, Building 13, Nangang Second Industrial Park, Nanshan District, Shenzhen, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Jan. 6, 2026 Subject; Request for Confidentiality FCC ID: 2BLLH-AT2LITE To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List Tune-up Procedure Software Security Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Kate Liu Title: Certification Engineer

FJ Dynamics Technology Academy (Changzhou) Co., Ltd. Shenzhen Branch Room 501, Building 13, Nangang Second Industrial Park, Nanshan District, Shenzhen, China Letter of Authorization Company: FJ Dynamics Technology Academy (Changzhou) Co., Ltd. Shenzhen Branch Address: Room 501, Building 13, Nangang Second Industrial Park, Nanshan District, Shenzhen, China Product Name: FJDynamics AT2 Lite Auto Steer System Model Number(s): AT2 Lite Product Description: FJDynamics AT2 Lite Auto Steer System We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jan. 6, 2026 Name: Kate Liu Title: Certification Engineer Company: FJ Dynamics Technology Academy (Changzhou) Co., Ltd. Shenzhen Branch

Report No.: AGC12845251003AP02 Page 1 of 5 EXTERNAL PHOTOS All View of EUT Top View of EUT Report No.: AGC12845251003AP02 Page 2 of 5 Bottom View of EUT Front View of EUT Report No.: AGC12845251003AP02 Page 3 of 5 Back View of EUT Left View of EUT Report No.: AGC12845251003AP02 Page 4 of 5 Right View of EUT Port-1 View of EUT Report No.: AGC12845251003AP02 Page 5 of 5 Port-2 View of EUT ****************************************End of Report*************************************

FCC ID and ISED Label Location 20mm*10mm FCC ID:2BLLH-AT2LITE IC:33312-AT2LITE HVIN:AT2 Lite

Report No.: AGC12845251003AP02 Page 1 of 8 INTERNAL PHOTOS Open View-1 of EUT Open View-2 of EUT Report No.: AGC12845251003AP02 Page 2 of 8 Internal View-1 of EUT Internal View-2 of EUT BT/WIFI Antenna Diversity Antenna Report No.: AGC12845251003AP02 Page 3 of 8 Internal View-4 of EUT Internal View-5 of EUT GSM&WCDMA &LTE Antenna Report No.: AGC12845251003AP02 Page 4 of 8 Internal View-6 of EUT Internal View-7 of EUT Report No.: AGC12845251003AP02 Page 5 of 8 Internal View-8 of EUT Internal View-9 of EUT Report No.: AGC12845251003AP02 Page 6 of 8 Internal View-10 of EUT Internal View-11 of EUT Report No.: AGC12845251003AP02 Page 7 of 8 Internal View-12 of EUT Internal View-13 of EUT Report No.: AGC12845251003AP02 Page 8 of 8 Internal View-14 of EUT Internal View-15 of EUT ****************************************End of Report*************************************

Page 1 of 11 RF Exposure Report Report No.: AGC12845251003FH01 FCC ID : 2BLLH-AT2LITE APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : FJDynamics AT2 Lite Auto Steer System BRAND NAME : FJDynamics MODEL NAME : AT2 Lite APPLICANT : FJ Dynamics Technology Academy (Changzhou) Co., Ltd. Shenzhen Branch DATE OF ISSUE : Dec. 15, 2025 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC12845251003FH01 Page 2 of 11 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 15, 2025 Valid Initial Release Report No.: AGC12845251003FH01 Page 3 of 11 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC12845251003FH01 Page 4 of 11 1. General Information Applicant FJ Dynamics Technology Academy (Changzhou) Co., Ltd. Shenzhen Branch Address Room 501, Building 13, Nangang Second Industrial Park, Nanshan District, Shenzhen, China Manufacturer FJ Dynamics Technology Academy (Changzhou) Co., Ltd. Shenzhen Branch Address Room 501, Building 13, Nangang Second Industrial Park, Nanshan District, Shenzhen, China Factory FJ Dynamics Technology Academy (Changzhou) Co., Ltd. Shenzhen Branch Address Room 501, Building 13, Nangang Second Industrial Park, Nanshan District, Shenzhen, China Product Designation FJDynamics AT2 Lite Auto Steer System Brand Name FJDynamics Test Model AT2 Lite Series Model(s) N/A Difference Description N/A Date of receipt of test item Nov. 05, 2025 Date of Test Nov. 05, 2025~Dec. 15, 2025 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Bibo Zhang (Project Engineer) Dec. 15, 2025 Reviewed By Jack Gui (Reviewer) Dec. 15, 2025 Approved By Angela Li (Authorized Officer) Dec. 15, 2025 Report No.: AGC12845251003FH01 Page 5 of 11 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Bluetooth: 2.402GHz ~ 2.480GHz GSM: 824.2MHz ~ 848.8MHz, 1850.2MHz ~ 1909.8MHz UMTS: 826.4MHz~ 846.6MHz, 1852.4MHz~ 1907.6MHz LTE: 1850.0MHz~ 1909.9MHz/ 1710 MHz~ 1754.9MHz, 824MHz~ 848.9MHz/ 2500MHz~ 2569.9MHz, 2570MHz~ 2619.9MHz 2300MHz~ 2399.9MHz, 2496MHz~2689.9MHz Hardware Version V2 Software Version V4.0.0.16 Modulation Type 2.4G WLAN: 802.11b:(DQPSK, DBPSK, CCK) DSSS 802.11g/n:(64-QAM,16-QAM, QPSK, BPSK) OFDM 5G WLAN: 802.11a/n:(64-QAM, 16-QAM, QPSK, BPSK) OFDM 802.11ac :(256-QAM, 64-QAM, 16-QAM, QPSK, BPSK) OFDM BT_BLE: GFSK 125Kbps/500Kbps/1Mbps 2Mbps BT_BR_EDR: BR GFSK,π /4-DQPSK, 8DPSK GSM/GPRS/EDGE: GMSK/8PSK WCDMA/HSDPA/HSUPA: BPSK/QPSK LTE: QPSK/16QAM Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PIFA Antenna Antenna Gain 2.4GWIFI&BT:3.07dBi, 5GWIFI:5.10dBi, GSM850:-1.59dBi, PCS1900:0.36dBi WCDMA850:-1.59dBi, WCDMA1900:0.4dBi LTE Band 2: 2.93dBi, LTE Band 4: 2.93dBi,LTE Band 5: 2.93dBi LTE Band 7: 2.93dBi, LTE Band 38: 2.93dBi, LTE Band 40: 2.93dBi LTE Band 41: 2.93dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC12845251003FH01 Page 6 of 11 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and pr…

Text truncated - open the document above for the full version.

Page 1 of 83 FCC Test Report Report No.: AGC12845251003FR01 FCC ID : 2BLLH-AT2LITE APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : FJDynamics AT2 Lite Auto Steer System BRAND NAME : FJDynamics MODEL NAME : AT2 Lite APPLICANT : FJ Dynamics Technology Academy (Changzhou) Co., Ltd. Shenzhen Branch DATE OF ISSUE : Dec. 15, 2025 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC12845251003FR01 Page 2 of 83 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 15, 2025 Valid Initial Release Report No.: AGC12845251003FR01 Page 3 of 83 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies and Behaviour. ............................................................................. 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4.System Test Configuration ............................................................................................................................ 13 4.1 EUT Configuration ................................................................................................................................... 13 4.2 EUT Exercise ........................................................................................................................................... 13 4.3 Configuration of Tested System .............................................................................................................. 13 4.4 Equipment Used in Tested System ......................................................................................................... 14 4.5 Summary of Test Results ........................................................................................................................ 15 5. Description of Test Modes ........................................................................................................................... 16 6. RF Output Power Measurement .................................................................................................................. 18 6.1 Provisions Applicable .............................................................................................................................. 18 6.2 Measurement Procedure ......................................................................................................................... 18 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 18 6.4 Measurement Result ............................................................................................................................... 19 7. 20dB Bandwidth and 99% Occupied Bandwidth Measurement ............................................................... 25 7.1 Provisions Applicable .............................................................................................................................. 25 7.2 Measurement Procedure ......................................................................................................................... 25 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 25 7.4 Measurement Results ............................................................................................................................. 26 8. Conducted Ba…

Text truncated - open the document above for the full version.

Report No.: AGC12845251003FR01 Page 69 of 83 Test_Graph_BR_HOP_ANT1_NA_1Mbps_2441_Number of Busrt Test_Graph_BR_HOP_ANT1_NA_1Mbps_2441_Time per Burst Report No.: AGC12845251003FR01 Page 70 of 83 Test_Graph_BR_HOP_ANT1_NA_1Mbps_2480_Number of Busrt Test_Graph_BR_HOP_ANT1_NA_1Mbps_2480_Time per Burst Report No.: AGC12845251003FR01 Page 71 of 83 Test_Graph_EDR_HOP_ANT1_NA_2Mbps_2402_Number of Busrt Test_Graph_EDR_HOP_ANT1_NA_2Mbps_2402_Time per Burst Report No.: AGC12845251003FR01 Page 72 of 83 Test_Graph_EDR_HOP_ANT1_NA_2Mbps_2441_Number of Busrt Test_Graph_EDR_HOP_ANT1_NA_2Mbps_2441_Time per Burst Report No.: AGC12845251003FR01 Page 73 of 83 Test_Graph_EDR_HOP_ANT1_NA_2Mbps_2480_Number of Busrt Test_Graph_EDR_HOP_ANT1_NA_2Mbps_2480_Time per Burst Report No.: AGC12845251003FR01 Page 74 of 83 Test_Graph_EDR_HOP_ANT1_NA_3Mbps_2402_Number of Busrt Test_Graph_EDR_HOP_ANT1_NA_3Mbps_2402_Time per Burst Report No.: AGC12845251003FR01 Page 75 of 83 Test_Graph_EDR_HOP_ANT1_NA_3Mbps_2441_Number of Busrt Test_Graph_EDR_HOP_ANT1_NA_3Mbps_2441_Time per Burst Report No.: AGC12845251003FR01 Page 76 of 83 Test_Graph_EDR_HOP_ANT1_NA_3Mbps_2480_Number of Busrt Test_Graph_EDR_HOP_ANT1_NA_3Mbps_2480_Time per Burst Report No.: AGC12845251003FR01 Page 77 of 83 12. Frequency Separation Measurement 12.1 Provisions Applicable When the power is less than 0.125W: The minimum permissible channel separation for this system is 2/3 the value of the 20dB BW. When the power is less than 1W: The minimum permissible channel separation for this system is 20dB BW. 12.2 Measurement Procedure The EUT shall have its hopping function enabled. Use the following spectrum analyzer settings: 1. Span: Wide enough to capture the peaks of two adjacent channels. 2. RBW: Start with the RBW set to approximately 30% of the channel spacing; adjust as necessary to best identify the center of each individual channel. 3. Video (or average) bandwidth (VBW) ≥ RBW. 4. Sweep: Auto. 5. Detector function: Peak. 6. Trace: Max hold. g) Allow the trace to stabilize. 7. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. 12.3 Measurement Setup (Block Diagram of Configuration) 12.4 Measurement Result Test Data of Frequency Separation Test Mode Channel Separation (MHz) Limits (MHz) Pass or Fail GFSK 0.994 0.564 Pass π /4-DQPSK 0.994 0.849 Pass 8DPSK 0.997 0.863 Pass Report No.: AGC12845251003FR01 Page 78 of 83 Test Graphs of Frequency Separation Test_Graph_BR_HOP_ANT1_NA_1Mbps_Hopping Separation Test_Graph_EDR_HOP_ANT1_NA_2Mbps_Hopping Separation Report No.: AGC12845251003FR01 Page 79 of 83 Test_Graph_EDR_HOP_ANT1_NA_3Mbps_Hopping Separation Report No.: AGC12845251003FR01 Page 80 of 83 13. AC Power Line Conducted Emission Test 13.1 Measurement Limit Frequency Maximum RF Line Voltage Q.P. (dBμV) Average (dBμV) 150kHz~500kHz 66-56 56-46 500kHz~5MHz 56 46 5MHz~30MHz 60 50 Note: 1. The lower limit shall apply at the transition frequency. 2. The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.50 MHz. 13.2 Measurement Setup (Block Diagram of Configuration) Report No.: AGC12845251003FR01 Page 81 of 83 13.3 Preliminary Procedure of Line Conducted Emission Test 1. The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.10 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground…

Text truncated - open the document above for the full version.