2BNTC-MPBS10Magnetic Power Bank

JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Sincerely, Signature [Name] Steven Xu [Title] Manager [Company]JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Telephone: 13760699244 Email: [email protected] The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 10/9/2025 U.S. Agent Designation By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2. JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTDacknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID:[2BNTC-MPBS10]): Name and company of U.S. agent: TACWA, LLC Physical U.S. address of agent: 4109 S 220 th PI Kent WA 98032 USA FRN of U.S. agent: 0033491978 Email address of U.S. agent: [email protected] Telephone: (253) 508-7326 TACWA, LLCacknowledges their obligation to accept service of process on behalf ofJMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD with the FRN 0036690592accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. 911(d)(7). Signature Tai Ly[Name of U.S. agent] [Title of U.S. agent] Manager [Company of U.S. agent]Tacwa, LLC 48_[model] US_Agent_2.911 (d)(7) - U, V04 乡

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Grantee code: 2BNTC FCC ID: 2BNTC-MPBS10 FRN: 0036690592 Contact Name: Cici Jiang Address: 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town Telephone No: 13760699244 Fax No: N/A Email: [email protected] i. [JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2025/11/24 Applicant’s Name: Cici Jiang Title: GM Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Code 00018768 Ed. 1 Item 1.The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2.Technical Requirements for Kaspersky Cybersecurity Software: #General Requirements (For all Devices)Yes / No or N/AComments 1Internet connection for activation and updates (For all Operating Systems) N/A DeviceMagnetic Power Bank Company nameJMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Grantee code2BNTC FCC ID2BNTC-MPBS10 FRN0036690592 Contact nameCici Jiang Address3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, 528429, China Telephone number13760699244 [email protected] Chipset/module informationIP5219 Operating System (if applicable)N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 #GeneralRequirements(ForWindowsDevices)Yes/NoorN/AComments 1Storage:1500MBfreespaceontheharddriveN/A 2OperatingSystem: MicrosoftWindows8,8.1,10&11Home/Pro/Enterprise Microsoft Windows7Starter/HomeBasic&Premium/Professional/ UltimateSP1orhigher N/A 3Processor:1GHzorhigher(x86orx64)N/A 4Memory(RAM)1GB(32-bit)or2GB(64-bit)N/A 5ScreenResolution:Minimumresolutionof1024x768N/A #GeneralRequirements(FormacOSdevices)Yes/NoorN/AComments 1OperatingSystemmacOS®13–14N/A 2Memory(RAM)4GBN/A 3Storage:3455MBfreespaceontheharddriveN/A #GeneralRequirements(ForAndroidDevices)Yes/NoorN/AComments 1Storage:150MBfreespaceN/A 2OperatingSystem:Android™10–14N/A 3ScreenResolution:Minimumresolutionof320x480N/A #GeneralRequirements(foriOSdevices)Yes/NoorN/AComments 1Storage:150MBfreespaceN/A 2OperatingSystem:iOS®17N/A Afterreviewedthetechnicalrequirements,isthedevicecapableofsupportingtheinstallationof Kasperskysoftware? 3 ☐Yes,gotoItem3. ☒ No.Inthiscase,therestoftheitemsdonotapply.ThedevicecannotsupportinstallationofKaspersky software Item3.ConnectivityCapabilities: #PhysicalInterfacePurposeJustification 1 1 #WirelessInterfacePurposeJustification 1 1 Afterthereviewofthisitems,thedevice: ☒Cannotsupportinstallationofanycybersecurityoranti-virussoftwareonthecoveredlist. ☐ Potentiallycanoperatewithanycybersecurityoranti-virussoftwareonthecoveredlist–additionalthird- partyproofisprovidedtodemonstratecompliancewithrequirementsasof2.911(d)5(i),(ii)–“Proofof CompliancewithCoveredListSoftwareRequirements”ofthisdocumentapplies Signature:Name:CiciJiang Date:2025/11/20 1 Thejustificationfieldisusedtojustifywhythesoftwarecannotbereceivedthroughthatinterface.Checktheannexformore indications.

TCB CALL página 1 File FCC ID: 2BNTC-MPBS10 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. TCB CALL página 2 On the official register from : https:www.sos.wa.gov/corps TCB CALL página 3 TCB CALL página 4 In google: Office: TCB CALL página 5 Licence: TCB CALL página 6 Other: TCB CALL página 7 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

C5266091_X10_Ed.2 1/1 JMTEKTECHNOLOGY(ZHONGSHAN)CO.,LTD OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2025-11-20 Subject:RequestforConfidentiality FCCID:2BNTC-MPBS10 ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-TermConfidentiality NOTE2 IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo ☒ BlockDiagram ☒☐ Schematics ☒☐ TestReportNoNo TestSetupPhotosNo ☒ User’sManual ☐ NOTE 1 ☒ InternalPhotos ☐ NOTE 1 ☒ PartsList/TuneUp ☐☐ RFExposureInfoNoNo OperationalDescription ☒☐ CoverLetter(s)NoNo SDRSoftware/SecurityInfo ☐ No NOTE1:Long-TermConfidentialitymaybepermittedunderspecialconditions(SeeII.LONG-TERMCONFIDENTIALITY,Section3of KDB726920,uselastinforce) NOTE2:Short-TermConfidentialitycanberequestedforamaximumof180daysfromthedateofthegrant. Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Incaseofshort-termConfidentiality,theapplicantrequeststheexhibitsselected abovearewithheldfrompublicviewforaperiodof180daysfromthedateofthe GrantofEquipmentAuthorizationandpriortomarketing. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name:CiciJiang Title:GM 2025.11.20

C5266091_X8_Ed.1 1/1 Letter of Authorization JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Company: JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Address: 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town Product Name: Magnetic Power Bank Model Number: MPBS10 FCC Identifier: 2BNTC-MPBS10 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Cici Jiang Date: 2025.11.24 Title: GM Signature of applicant:

MPBS10-LD-JMT001 MPBS10 StevenSam 250807 工艺：激光镭雕 字体颜色：灰色 注意：CE字高不小于5mm，垃圾桶字高不小于7mm。 68mm 7.5mm 200% 100% 100% Model No.: MPBS10 Type-C Input: 5V 2A Wireless Output: 5W Internal Battery: 5000mAh 3.7V 18.5Wh Type-C Output: 5V 2A Model No.: MPBS10Type-C Input: 5V 2AWireless Output: 5W Model No.: MPBS10 Type-C Input: Wireless Output: 5W Internal Battery: 5000mAh 3.7V 18.5Wh Type-C Output: 5V 2A FCC ID: 2BNTC-MPBS10 Internal Battery: 5000mAh 3.7V 18.5Wh Type-C Output: 5V 2AFCC ID: 2BNTC-MPBS10 FCC ID: 2BNTC-MPBS10 FCC ID: 2BNTC-MPBS10

Page 1 of 15 Code:AB-RF-05-b FCC Test Report Report No.:1812C50421212502 Applicant: JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Address: 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, 528429, China Product Name:Magnetic Power Bank Report Date:2025-11-20 Shenzhen Anbotek Compliance Laboratory Limited #资质章# #检测章# Report No.: 1812C50421212502 Page 2 of 15 FCC ID: 2BNTC-MPBS10 Code:AB-RF-05-b Contents 1. General Information ...............................................................................................................................5 1.1. Client Information ........................................................................................................................5 1.2. Description of Device (EUT) ........................................................................................................5 1.3. Auxiliary Equipment Used During Test........................................................................................6 1.4. Description of Test Modes...........................................................................................................6 1.5. Test Equipment List.....................................................................................................................6 1.6. Measurement Uncertainty ...........................................................................................................6 1.7. Description of Test Facility ..........................................................................................................7 1.8. Disclaimer....................................................................................................................................7 2. Measurement and Result ......................................................................................................................8 2.1. Limits For Maximum Permissible Exposure (MPE) .....................................................................8 2.2. Test Setup ...................................................................................................................................8 2.3. Test Procedure ............................................................................................................................9 2.4. Test Result ................................................................................................................................10 APPENDIX I -- TEST SETUP PHOTOGRAPH .......................................................................................15 APPENDIX II -- EXTERNAL PHOTOGRAPH .........................................................................................15 APPENDIX III -- INTERNAL PHOTOGRAPH..........................................................................................15 Report No.: 1812C50421212502 Page 3 of 15 FCC ID: 2BNTC-MPBS10 Code:AB-RF-05-b TEST REPORT Applicant:JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Manufacturer:JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Product Name:Magnetic Power Bank Model No.:MPBS10 Trade Mark: N/A Rating(s): Input: 5V⎓2A Type-C Output: 5V⎓2A Wireless Output: 5W Battery Capacity: DC 3.7V, 5000mAh Test Standard(s): FCC Part 1.1310, 1.1307(b) : FCC Part 2.1093 Test Method(s): KDB680106 D01 RF Exposure Wireless Charging Apps v04 The device described above is tested by Shenzhen Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Shenzhen Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC Part 1.1307 & Part 2.1093 & KDB680106 D01, October 25, 2023 requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of Shenzhen Anbotek Compliance Laboratory Limited. Date of Receipt2025-08-18 Date of Test2025-08-18 to 2025-08-28 Prepared By (Cecilia Chen) Approved & Authorized Signer (Hugo Chen) Report No.: 1812C50421212502 Page 4 of 15 FCC ID: 2BNTC-MPBS10 Code:AB-RF-05-b Revision History Report VersionDescriptionIssued Date R00Original Issue.2025-11-20 Report No.: 1812C50421212502 Page 5 of 15 FCC ID: 2BNTC-MPBS10 Code:AB-RF-05-b 1. General Information 1.1. Client Information Applicant JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Address 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, 528429, China Manufacturer JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Address 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, 528429, China Factory JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Address 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, 528429, China 1.2. Description of Device (EUT) Product Name: Magnetic Power Bank Model No.:MPBS10 Trade Mark: N/A Test Power Supply: DC 3.7V battery inside Test Sample No.: 1-2-1(Normal Sample), 1-2-2(Engineering Sample) Adapter:N/A RF Specification Operation Frequency :112-205kHz Modulation Type : ASK Antenna Type:Inductive loop coil Antenna Remark: 1) All of the RF specification are provided by customer. 2) For a more detailed features description, please refer to the manufacturer’s specifications or the User’s Manual. Report No.: 1812C50421212502 Page 6 of 15 FCC ID: 2BNTC-MPBS10 Code:AB-RF-05-b 1.3. Auxiliary Equipment Used During Test TitleManufacturerModel No.Serial No. Apple PhoneAppleiPhone 12DNPDJC7T0DYF 1.4. Description of Test Modes Pretest ModesDescriptions TM1 Adapter+WPT Mode (5W 1% Load) TM2 Adapter+WPT Mode (5W 50% Load) TM3 Adapter+WPT Mode (5W 99% Load) TM4 WPT Mode (5W 1% Load) TM5 WPT Mode (5W 50% Load) TM6 WPT Mode (5W 9…

Text truncated - open the document above for the full version.

Page 1 of 23 Code:AB-RF-05-b FCC Test Report Report No.:1812C50421212501 Applicant: JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Address: 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, 528429, China Product Name:Magnetic Power Bank Report Date:2025-11-20 Shenzhen Anbotek Compliance Laboratory Limited #资质章# #检测章# Report No.: 1812C50421212501 Page 2 of 23 FCC ID: 2BNTC-MPBS10 Code:AB-RF-05-b Contents 1. General Information .............................................................................................................................5 1.1. Client Information ......................................................................................................................5 1.2. Description of Device (EUT) ......................................................................................................5 1.3. Auxiliary Equipment Used During Test......................................................................................6 1.4. Description of Test Modes.........................................................................................................6 1.5. Description Of Test Setup .........................................................................................................7 1.6. Test Equipment List...................................................................................................................8 1.7. Measurement Uncertainty .........................................................................................................9 1.8. Description of Test Facility ........................................................................................................9 1.9. Disclaimer..................................................................................................................................9 2. Summary of Test Results ..................................................................................................................10 3. Conducted Emission Test..................................................................................................................11 3.1. Test Standard and Limit ..........................................................................................................11 3.2. Test Setup ...............................................................................................................................11 3.3. Test Procedure ........................................................................................................................11 3.4. Test Data .................................................................................................................................11 4. Radiation Spurious Emission.............................................................................................................14 4.1. Test Standard and Limit ..........................................................................................................14 4.2. Test Setup ...............................................................................................................................14 4.3. Test Procedure ........................................................................................................................15 4.4. Test Data .................................................................................................................................15 5. 20dB Occupy Bandwidth Test ...........................................................................................................20 5.1. Test Standard and Limit ..........................................................................................................20 5.2. Test Setup ...............................................................................................................................20 5.3. Test Procedure ........................................................................................................................20 5.4. Test Data .................................................................................................................................20 6. Antenna Requirement........................................................................................................................22 6.1. Test Standard and Requirement .............................................................................................22 6.2. Antenna Connected Construction ...........................................................................................22 APPENDIX I -- TEST SETUP PHOTOGRAPH .....................................................................................23 APPENDIX II -- EXTERNAL PHOTOGRAPH .......................................................................................23 APPENDIX III -- INTERNAL PHOTOGRAPH........................................................................................23 Report No.: 1812C50421212501 Page 3 of 23 FCC ID: 2BNTC-MPBS10 Code:AB-RF-05-b TEST REPORT Applicant:JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Manufacturer:JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Product Name:Magnetic Power Bank Model No.:MPBS10 Trade Mark: N/A Rating(s): Input: 5V⎓2A Type-C Output: 5V⎓2A Wireless Output: 5W Battery Capacity: DC 3.7V, 5000mAh Test Standard(s): 47 CFR Part 15 Subpart C Test Method(s): ANSI C63.10: 2020 The device described above is tested by Shenzhen Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Shenzhen Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the 47 CFR Part 15 Subpart C requirements. This report applies to above tested sample only and shall not be repro…

Text truncated - open the document above for the full version.

FinePage1of3 承認書 SPECIFICATIONFORAPPROVAL 客戶： CUSTOMER: 客戶料號： CUSTP/N: 10.0110.099 深圳市一讯达科技有限公司 Shenzhen Yixunda Technology Co., Ltd 4 松岛料號： FINEP/N: G4511-6.5UH单线圈0.08*24P*2*10TS 産品型號： DESC: Φ 45MMX5.0MMX0.8MM 开槽 日期： DATE: 2022/08/06 版本： Version: A.0 擬制 PREPAREDBY 審核 CHECKEDBY 批准 APPROVEDBY 客戶承認 CUSTOMERAPPROVE 黄燕铭黄东明黄锦华 Shenzhen Yixunda Technology Co., Ltd 2533A2903-147 No. 903-147, Building A2, 2533 Shangjing Road, Fenghuang Community, Fenghuang Street, Guangming District, Shenzhen City FinePage2of3 版本變更履歷 VersionChangeHistory 版本 Rev. 變更前 BeforeChange 變更後 AfterChange 更改日期 ChangeDate 批准 ApprovedBy A.0 新发行 ----2021/04/24黄锦华 FinePage3of3 SPECIFICATION 産品型號： DESC Φ20.5x40-6.5uH-0.08x24P-40mm 版本 Rev：A.0 客戶CUST: XXX 客户料号CUSTP/N: 一、尺寸DIMENSION:(mm) 二、原理图SCHEMATICDIAGRAM: A 44±0.5 B 40±1 C 20.5±0.5 D 40±2 E 3±2 注： 1.交叉出线; 2.出线位置缠8mm(ref)宽度高 温胶纸1-2Ts; 3.线圈贴圆形硬磁片带槽，磁 片尺寸43.5±1mm,内孔 5.2mm,厚度为0.8±0.2mm。 三、绕线参数WindingSpecification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 WindingDirection 1SF丝包线0.08*24PX210TsCCW 四、电气特性ELECTRICALCHARACTERISTICS: 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS 1IND.S-F3.8uH±20%单独线圈100KHz/1.0VLCZMETER1062B 2IND.S-F6.5uH±10%加磁片100KHz/1.0VLCZMETER1062B 3DCRS-F≤90mΩ100KHz/1.0VLCZMETER502B 4QS-F≥39100KHz/1.0VLCZMETER502B 擬制 / 日期 PREPAREDBY/DATE 審核 / 日期 CHECKEDBY/DATE 黄燕铭 2022/08/6 黄锦华 2022/08/6