2BPIZ-REPT01Smart Analog/Digital Repeater

Smart Analog/Digital Repeater REPT01 User Manual 1. Introduction This smart repeater is designed to extend the communication range of your two-way radios. It features 20 programmable channels and Auto-Check (AutoChk) technology, which automatically detects and forwards both Analog and Digital signals. 2. Interface & Display LCD Screen Overview: The main screen displays the current channel and operating parameters. • CH XX: Indicates the current Channel Number (1–20). • Tx: Transmit Frequency (Downlink). This is the frequency your radio receives. • Rx: Receive Frequency (Uplink). This is the frequency your radio transmits. • CC: Color Code (0–15). Active only for Digital signals. • CTC: CTCSS/CDCSS (1-121). Active only for Analog signals. • AutoChk Repeat: Indicates the device is in smart detection mode. 3.Button Functions Button Function in Standby Function in Menu MENU Enter Settings Select / Confirm item UP Next Channel Increase value DOWN Previous Channel Decrease value BACK Unlock Keypad Exit / Cancel 4. Operation Guide 4.1 Switching Channels In standby mode, press the [menu] and then press the [ + ] or [ - ] buttons to cycle through the 20 pre-set channels. The screen will update to show the frequencies for the selected channel. 4.2 Programming Parameters To customize the frequency, Color Code, or CTCSS tone for the current channel: 1.Enter Menu: Press the [ MENU ] button. The first editable item (Tx) will highlight. 2.Select Item: Press [ MENU ] repeatedly to scroll through the parameters: oTx (Transmit Frequency) oRx (Receive Frequency) oCC (Digital Color Code) oCTC (Analog Tone) 3.Adjust Value: When the desired item is highlighted, press [ + ] or [ - ] to change the value. 4.Save & Exit: Press [ BACK ] to save your changes and return to the main screen. 5. "AutoChk" Mode Explained This repeater supports mixed-mode operation. You do not need to manually switch between Analog and Digital modes. •Digital Mode: If a digital signal matches the Rx frequency and Color Code (CC), the repeater forwards it digitally. •Analog Mode: If an analog signal matches the Rx frequency and CTCSS (CTC), the repeater forwards it as an analog signal. > Note: Please ensure your portable radios are programmed with the matching Frequencies, Color Codes, or CTCSS tones. FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 117.5 mm between the radiator & body.

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Uzomi Technology Co., Ltd. Address: 204, Taizi Industrial Zone, No. 1 Baihua Road, Laowei Village, Buji Community, Buji Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China FCC ID: 2BPIZ-REPT01 Date: Apr. 15, 2026 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Uzomi Technology Co., Ltd. ] (“the applicant”) designate [Wedo Group] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Wedo Group Address: 710 Arabian Ln Walnut, CA 91789, United States FRN：0037730611 Contact Name: Jeffrey Chen Telephone No: (323) 528-1888 Email: [email protected] Applicant Company name: Shenzhen Uzomi Technology Co., Ltd. Address: 204, Taizi Industrial Zone, No. 1 Baihua Road, Laowei Village, Buji Community, Buji Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China FRN: 0037043239 Contact Name: Lyric Li Telephone No: 13652435277 Email: [email protected] Signature: Signature:

Shenzhen Uzomi Technology Co., Ltd. 204, Taizi Industrial Zone, No. 1 Baihua Road, Laowei Village, Buji Community, Buji Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Apr. 15, 2026 Subject; Request for Confidentiality FCC ID: 2BPIZ-REPT01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Parts List tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Lyric Li Title: Manager

Shenzhen Uzomi Technology Co., Ltd. 204, Taizi Industrial Zone, No. 1 Baihua Road, Laowei Village, Buji Community, Buji Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China Letter of Authorization Company: Shenzhen Uzomi Technology Co., Ltd. Address: 204, Taizi Industrial Zone, No. 1 Baihua Road, Laowei Village, Buji Community, Buji Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China Product Name: Smart Analog/Digital Repeater Model Number(s): REPT01 Product Description: Smart Analog/Digital Repeater We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Apr. 15, 2026 Name: Lyric Li Title: Manager Company: Shenzhen Uzomi Technology Co., Ltd.

Shenzhen Uzomi Technology Co., Ltd. 204, Taizi Industrial Zone, No. 1 Baihua Road, Laowei Village, Buji Community, Buji Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China Date: Apr. 15, 2026 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Extended Frequencies Justification for Certification of Transmitter FCC ID: 2BPIZ-REPT01 Dear Sir/Madam, This transmitter was designed to operate in following frequency ranges:400-470MHz. To aid equipment authorization in other countries which accept the United States FCC Grant for Certification, Shenzhen Uzomi Technology Co., Ltd. is requesting that the FCC lists the frequencies 400-470MHz under FCC Rule Parts 90 on the FCC Grant. Shenzhen Uzomi Technology Co., Ltd. attests that this is Smart Analog/Digital Repeater, will not be marketed to USA users with the frequency band which is not allowed by the rule part 90. Per the FCC’s KDB 634817 guidance, as an alternative to listing the exact frequencies, we acknowledge that it’s a violation of the FCC Rules if this device operates on unauthorized frequencies. Frequency Range (MHz） FCC Rule Part 406.1-450 FCC Part 90 450-454 FCC Part 90 456-460 FCC Part 90 460-462.5375 FCC Part 90 462.7375-467.5375 FCC Part 90 Also, equipment programming is the responsibility of Authorized Service Personnel, the Shenzhen Uzomi Technology Co., Ltd. complies with 47 CFR Part 90.203(e), in that the operator cannot directly program the transmit frequencies using the normally accessible external controls. Please contact me if you require any additional information. Sincerely Yours, Signature: (Applicant signature) Lyric Li

Shenzhen Uzomi Technology Co., Ltd. 204, Taizi Industrial Zone, No. 1 Baihua Road, Laowei Village, Buji Community, Buji Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China Date: Apr. 15, 2026 FCC Part 90 Letter FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Declaration of compliance to the requirements of §90.203 FCC ID: 2BPIZ-REPT01 Dear Sir/Madam, We, Shenzhen Uzomi Technology Co., Ltd., acknowledge that this device will not be marketed to USA users with the frequency band which is not allowed by rule part 90.203 and it is a violation of FCC rules if this device is operated on unauthorized frequencies inside the U.S.A. This equipment meets the requirements of the FCC Rules, Parts 90.203(e) and (g), as applicable. Programming of this products transmit frequencies can be performed ONLY by the manufacturer or by service or by maintenance personal. The operator can’t program transmit frequencies using the equipment’s external operation controls. This is to certify that the requirements of 47 CFR Part 90.203(j)(4) and (5) spectrum efficiency are met by the Shenzhen Uzomi Technology Co., Ltd. demonstrated by the tests conducted on the sample radio provided. The tests show that the 4FSK data rate is in accordance with ETSI TS 102 361-1, that is 9600 bits per second in a 12.5 kHz bandwidth to satisfy the data rate requirement of 4800 bits per second per 6.25 kHz of channel bandwidth (7K60F1D emissions). Additionally, the radio uses the AMBE+2 half-rate vocoder to compress 60 ms of normal bursts are sent in alternate 30 ms TDMA slots and so comply with the equivalence of one voice channel per 6.25 kHz bandwidth (7K60F1W emission). Additionally, the radio also meets the requirement of one voice channel per 12.5 kHz of channel bandwidth for analogue speech (11k0F3E emission). Sincerely Yours, Signature: (Applicant signature) Lyric Li

Report No.: AGC00106260102AP02 Page 1 of 4 EXTERNAL PHOTOS All View of EUT Top View of EUT Report No.: AGC00106260102AP02 Page 2 of 4 Bottom View of EUT Front View of EUT Antenna Port Report No.: AGC00106260102AP02 Page 3 of 4 Back View of EUT Left View of EUT Report No.: AGC00106260102AP02 Page 4 of 4 Right View of EUT Adapter View of EUT ****************************************End of Report*************************************

FCC ID Label Location FCC ID:2BPIZ-REPT01

Report No.: AGC00106260102AP02 Page 1 of 9 INTERNAL PHOTOS Open View of EUT (Figure 1) Open View of EUT (Figure 2) Report No.: AGC00106260102AP02 Page 2 of 9 Open View of EUT (Figure 3) Open View of EUT (Figure 4) Report No.: AGC00106260102AP02 Page 3 of 9 Open View of EUT (Figure 5) Open View of EUT (Figure 6) Report No.: AGC00106260102AP02 Page 4 of 9 Internal View of EUT (Figure 1) Internal View of EUT (Figure 2) Report No.: AGC00106260102AP02 Page 5 of 9 Internal View of EUT (Figure 3) Internal View of EUT (Figure 4) Report No.: AGC00106260102AP02 Page 6 of 9 Internal View of EUT (Figure 5) Internal View of EUT (Figure 6) Report No.: AGC00106260102AP02 Page 7 of 9 Internal View of EUT (Figure 7) Internal View of EUT (Figure 8) Report No.: AGC00106260102AP02 Page 8 of 9 Internal View of EUT (Figure 9) Internal View of EUT (Figure 10) Report No.: AGC00106260102AP02 Page 9 of 9 Internal View of EUT (Figure 11) ****************************************End of Report*************************************

Page 1 of 11 RF Exposure Report Report No.: AGC00106260102FH01 FCC ID : 2BPIZ-REPT01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Smart Analog/Digital Repeater BRAND NAME : SAMCOM MODEL NAME : REPT01 APPLICANT : Shenzhen Uzomi Technology Co., Ltd. DATE OF ISSUE : Apr. 15, 2026 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC00106260102FH01 Page 2 of 11 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 15, 2026 Valid Initial Release Report No.: AGC00106260102FH01 Page 3 of 11 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC00106260102FH01 Page 4 of 11 1. General Information Applicant Shenzhen Uzomi Technology Co., Ltd. Address 204, Taizi Industrial Zone, No. 1 Baihua Road, Laowei Village, Buji Community, Buji Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China Manufacturer Guangdong Samzuk Technology Co.,Ltd Address 2/F of Ming Huang Electrical Park 3rd Science Road, High-Tech Zone Heyuan City Guangdong China Factory Guangdong Samzuk Technology Co.,Ltd Address 2/F of Ming Huang Electrical Park 3rd Science Road, High-Tech Zone Heyuan City Guangdong China Product Designation Smart Analog/Digital Repeater Brand Name SAMCOM Test Model REPT01 Series Model(s) N/A Difference Description N/A Date of receipt of test item Jan. 07, 2026 Date of Test Jan. 07, 2026~Mar. 18, 2026 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Bibo Zhang (Project Engineer) Apr. 15, 2026 Reviewed By Jack Gui (Reviewer) Apr. 15, 2026 Approved By Angela Li (Authorized Officer) Apr. 15, 2026 Report No.: AGC00106260102FH01 Page 5 of 11 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5.825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: UHF: 400MHz to 470MHz Hardware Version V1.2 Software Version Modulation Type FM&4FSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation Detachable Antenna Antenna Gain 8.5dBi Minimum Assessment Distance 117.5cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC00106260102FH01 Page 6 of 11 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 101 & 201, Building 19(B5), Junfeng Industrial Park, Chongqing Road, P.R.C. 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC00106260102FH01 Page 7 of 11 3.3 Environmental Conditions Normal Conditions Temperature range (°C)…

Text truncated - open the document above for the full version.

Page 1 of 64 FCC Test Report Report No.: AGC00106260102FR01 FCC ID : 2BPIZ-REPT01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Smart Analog/Digital Repeater BRAND NAME : SAMCOM MODEL NAME : REPT01 APPLICANT : Shenzhen Uzomi Technology Co., Ltd. DATE OF ISSUE : Apr. 15, 2026 STANDARD(S) : FCC Part 90 Subpart I REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC00106260102FR01 Page 2 of 64 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 15, 2026 Valid Initial Release Report No.: AGC00106260102FR01 Page 3 of 64 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 7 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 8 2.4 Test Methodology ...................................................................................................................................... 8 2.5 Calculation of Emission Indicators ............................................................................................................ 8 2.6 Special Accessories .................................................................................................................................. 8 2.7 Equipment Modifications ........................................................................................................................... 8 3. Test Environment ............................................................................................................................................ 9 3.1 Address of The Test Laboratory ................................................................................................................ 9 3.2 Test Facility ................................................................................................................................................ 9 3.3 Environmental Conditions ....................................................................................................................... 10 3.4 Measurement Uncertainty ....................................................................................................................... 10 3.5 List of Equipment Used ........................................................................................................................... 11 4.System Test Configuration ............................................................................................................................ 13 4.1 EUT Configuration ................................................................................................................................... 13 4.2 EUT Exercise ........................................................................................................................................... 13 4.3 Configuration of Tested System .............................................................................................................. 13 4.4 Equipment Used in Tested System ......................................................................................................... 13 4.5 Summary of Test Results ........................................................................................................................ 14 5. Description of Test Modes ........................................................................................................................... 15 6. Frequency Stability ....................................................................................................................................... 16 6.1 Provisions Applicable .............................................................................................................................. 16 6.2 Measurement Procedure ......................................................................................................................... 16 6.3 Measurement Setup ................................................................................................................................ 16 6.4 Measurement Result ............................................................................................................................... 17 7. 26dB Emission Bandwidth and 99% Occupied Bandwidth ...................................................................... 18 7.1 Provisions Applicable .............................................................................................................................. 18 7.2 Measurement Procedure ......................................................................................................................... 18 7.3 Measurement Setup ................................................................................................................................ 18 7.4 Measurement Result ............................................................................................................................... 19 8. Spurious Radiated Emission ......................................................................................................................... 23 8.1 Provisions Applicable .............................................................................................................................. 23 8.2 Measurement Procedure ................................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC00106260102FR01 Page 38 of 64 9. Modulation Characteristics 9.1 Provisions Applicable According to FCC§2.1047 and §90.207, for Voice Modulation Communication Equipment, the frequency response of the audio modulation circuit over a range of 100 to 5000Hz shall be measured. 9.2 Measurement Procedure  Modulation Limit 1. Test layout and build equipment as shown below. 2. adjust the audio input for 60% of rated system deviation at 1kHz using this level as a reference (0dB). 3. Vary the input level from –20 to +20dB. 4. Record the frequency deviation obtained as a function of the input level. 5. Repeat step 2 with input frequency changing to 300, 1000, 1500 and 3000Hz in sequence.  Audio Frequency Response 1. Test layout and build equipment as shown below. 2. Adjust the audio input for 20% of rated system deviation at 1 kHz using this level as a reference (0 dB). 3. Vary the Audio frequency from 100 Hz to 10 kHz and record the frequency deviation. 4. Audio Frequency Response = 20log10 (Deviation of test frequency/Deviation of 1 kHz reference). 9.3 Measurement Setup Report No.: AGC00106260102FR01 Page 39 of 64 9.4 Measurement Result Measurement Power Supply: AC 120V A. Modulation Limit: 12.5kHz, Analog modulation, Assigned Frequency: 406.125MHz Modulation Level (dB) Peak Freq. Deviation At 300 Hz (kHz) Peak Freq. Deviation At 1000 Hz (kHz) Peak Freq. Deviation At 1500 Hz (kHz) Peak Freq. Deviation At 3000 Hz (kHz) -20 0.28 0.51 0.71 0.91 -15 0.39 0.74 0.94 1.29 -10 0.59 0.79 1.12 1.41 -5 0.76 1.11 1.35 1.54 0 0.77 1.15 1.46 1.68 +5 0.89 1.27 1.48 1.75 +10 0.94 1.34 1.64 1.83 +15 1.15 1.44 1.66 1.84 +20 1.21 1.46 1.69 1.86 Note: All the modes had been tested, but only the worst data recorded in the report. Report No.: AGC00106260102FR01 Page 40 of 64 B. Audio Frequency Response: Note: All the modes had been tested, but only the worst data recorded in the report. 12.5kHz, Analog modulation, Assigned Frequency:406.125MHz Frequency (Hz) Deviation (kHz) Audio Frequency Response(dB) 100 -- -- 200 -- -- 300 0.19 -13.31 400 0.28 -9.95 500 0.37 -7.53 600 0.48 -5.26 700 0.51 -4.74 800 0.62 -3.04 900 0.71 -1.86 1000 0.88 0.00 1200 0.91 0.29 1400 1.15 2.32 1600 1.35 3.72 1800 1.49 4.57 2000 1.52 4.75 2400 1.71 5.77 2500 1.95 6.91 2800 2.25 8.15 3000 2.33 8.46 Report No.: AGC00106260102FR01 Page 41 of 64 Measurement Power Supply: DC 12V A. Modulation Limit: 12.5kHz, Analog modulation, Assigned Frequency: 406.125MHz Modulation Level (dB) Peak Freq. Deviation At 300 Hz (kHz) Peak Freq. Deviation At 1000 Hz (kHz) Peak Freq. Deviation At 1500 Hz (kHz) Peak Freq. Deviation At 3000 Hz (kHz) -20 0.29 0.51 0.68 0.96 -15 0.42 0.75 0.91 1.28 -10 0.61 0.85 1.16 1.42 -5 0.79 1.13 1.36 1.56 0 0.81 1.16 1.48 1.69 +5 0.91 1.29 1.52 1.77 +10 0.96 1.38 1.66 1.82 +15 1.18 1.45 1.69 1.81 +20 1.25 1.49 1.71 1.83 Note: All the modes had been tested, but only the worst data recorded in the report. Report No.: AGC00106260102FR01 Page 42 of 64 B. Audio Frequency Response: Note: All the modes had been tested, but only the worst data recorded in the report. 12.5kHz, Analog modulation, Assigned Frequency:406.125MHz Frequency (Hz) Deviation (kHz) Audio Frequency Response(dB) 100 -- -- 200 -- -- 300 0.18 -13.58 400 0.27 -10.06 500 0.36 -7.56 600 0.49 -4.89 700 0.55 -3.88 800 0.65 -2.43 900 0.64 -2.57 1000 0.86 0.00 1200 0.87 0.10 1400 1.12 2.29 1600 1.36 3.98 1800 1.42 4.36 2000 1.48 4.72 2400 1.62 5.50 2500 1.91 6.93 2800 2.17 8.04 3000 2.21 8.20 Report No.: AGC00106260102FR01 Page 43 of 64 10. Maximum Transmitter Power 10.1 Provisions Applicable Per FCC §2.1046 and §90.205: Maximum ERP i…

Text truncated - open the document above for the full version.