2BPIZ-RMSP07Bluetooth Speaker Microphone for Walkie Talkie

User Manual Bluetooth Speaker Microphone for Walkie Talkie Model: RMSP07 Tech Support Service Please contact us immediately if you need any tech support service and have any after-sale problems. We will give feedback to you within 24 hours. FB page: SAMCOM Radios Instagram: SAMCOM Radios [email protected] [email protected] Please contact with SAMCOM team www.samcom-radios.com Product Specification Item: Bluetooth Adapter Model: X7-TX Battery T ype: Lithium Polymer Battery Battery Capacity: 230mAh 3.7V (851mWh) Battery Life: About 10 hours Charging time: About 2 hours Charging input: 5.00V FCC ID:2BPIZ-X7-TX Item: Bluetooth Speaker Mic Model: RMSP07 Battery Type: Lithium Polymer Battery Battery Capacity: 1000mAh 3.7V (3.7Wh) Battery Life: About 10 hours Charging time: About 2 hours Charging input: 5.00V FCC ID:2BPIZ-RMSP07 After-Sales Service and Support Warr anty Period 15 months from the date of purchase of the product. The following conditions are not warranted 1. Damage caused by self-disassembly; 2. Failure caused by falling and man-made mechanical damage; 3. Failure or damage caused by force majeure; 4. Contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or like extreme heat, or food. Pleas e read this manual carefully before using the product and keep it properly. The illustrations of products, accessories and other products in the manual are schematic diagrams and are for reference only. Due to the update and upgrade of the product, the actual product and the schematic diagram may be slightly different, please refer to the actual product. Package Contents Bluetooth Speaker Mic Bluetooth Adapter Charging Cable Products Products - Bluetooth Speaker Mic ① PTT button ② Microphone ⑨ ③ Indicator LED ④ Speaker ⑤ Volume - ⑥ Power button ② ③ ⑦ Volume + ⑧ Headphone jack/Charging jack ⑨ Back clip ① ④ ⑤ ⑦ ⑥ ⑧ Products 2 Pin K Head Plug ① ②③ ① Type-C Charging Port ② Indicator Light ④ 2-pin Plug ③ Power Button 2 Pin K Head Plug Connector Installation Products 2 Pin K Head Plug SAMCOM X7-TX Two-Pin Standard Connector Diameter 2.5mm and 3.5mm, Space of two pin 11mm, Please confirm the interface type of your walkie talkies. Battery and Charging ●Battery Notification 1）Bluetooth Speaker Mic : When the battery capacity less than 20%, the red indicator will flash and a voice announce “Low Battery.” 2）Bluetooth Adapter: When the battery capacity less than 20%, the red indicator will flash to indicate low battery. ●Charging Indicator 1）Bluetooth Speaker Mic : Red light on while charging; when red light turns green, it means the charging of Bluetooth Speaker Mic is finished. 2）Bluetooth Adapter: Red light on while charging; when red light turn to green light means the charging of Bluetooth Adapter is finished. Bluetooth Speaker Mic Charging Cable Bluetooth Adapter Charging Cable Button Operations and Functions ●Bluetooth Speaker Mic – Button Operations Button Operation Function Indicator light PTT Button Connected to Bluetooth Adapter – Long Press Activate PTT Transmission Red Light Steady Power Button Long Press /Power Off Red and green lights flashing/All Lights Off After successfully connecting your phone– Short Press Pause Play Answer Call End Call / Hang Up Green Light Flashes Once Every 5 Seconds Power On Without Connection Auto Power Off after 300 Seconds All Lights Off Volume + Button Short Press Increase Volume --- Long Press Next Track --- Volume – Button Short Press Decrease Volume --- Long Press Previous Track --- Button Operations Functions and Pairing ●Bluetooth Adapter – Button Operations Button Operation Function Indicator Power Button Long press for 3 seconds Power on Green light on for about 1 second In power on state – short press Searching / Connecting state Green light flashes / blinks When connected to adapter – short press Cancel PTT transmission Red light off In power on state – long press for 3 seconds Power off Red light on for about 1 second, Then all lights off In Unpaired / Disconnected State Auto power off after 300 seconds All lights off Pairing and Connection Method The bluetooth speaker mic and the bluetooth adapter have been pre-paired at the time of factory shipment. Simply insert the adapter into the radio and power it on to use. (After pressing and holding the power button to turn on both the bluetooth speaker mic and the bluetooth adapter, the indicator lights will flash green slowly, indicating that pairing has been successfully completed and the devices are ready for use.) ●Pairing Bluetooth Speaker Mic with Mobile Phone 1）Step 1: Long press the bluetooth speaker mic power button for 3 seconds to turn on. The green light will turn on for about 1 second, then the red and green lights will flash, indicating the bluetooth speaker mic is in pairing mode. 2）Step 2: Enable Bluetooth on your phone and select the bluetooth speaker mic from the list of available devices（Bluetooth name for bluetooth speaker mic is RMSP07）. Once successfully connected, the green light will flash slowly. ●Pairing Bluetooth Speaker Mic with Bluetooth Adapter 1）Step 1: Long press the bluetooth speaker mic power button for 3 seconds to turn on. The green light will turn on for about 1 second, then the red and green lights will flash, indicating the bluetooth speaker mic is in pairing mode. 2）Step 2: Long press the bluetooth adapter power button for 3 seconds to turn on. The green light will turn on for about 1 second. The red and green lights will flash, indicating the adapter is in pairing mode. 3）Step 3: Once both the bluetooth speaker mic and adapter are powered on, they will automatically pair. When pairing is successful, the green light will flash slowly. ● Dual Pairing Mode for Bluetooth Adapter with Radio and Mobile Phone at the same time 1）Step 1: Long press the bluetooth speaker mic power button for 3 seconds to turn it on. The green light will turn on for about 1 second, then the red and green lights will flash, indicating the bluetooth…

Text truncated - open the document above for the full version.

Shenzhen Uzomi Technology Co., Ltd. 204, Taizi Industrial Zone, No. 1 Baihua Road, Laowei Village, Buji Community, Buji Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China Letter of Authorization Company: Shenzhen Uzomi Technology Co., Ltd. Address: 204, Taizi Industrial Zone, No. 1 Baihua Road, Laowei Village, Buji Community, Buji Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China Product Name: Bluetooth Speaker Microphone for Walkie Talkie Model Number(s): RMSP07 Product Description: Bluetooth Speaker Microphone for Walkie Talkie We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Mar. 05, 2026 Name: Lyric Li Title: Manager Company: Shenzhen Uzomi Technology Co., Ltd.

Report No.: AGC00106260201AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC00106260201AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC00106260201AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC00106260201AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 30MM*20MM FCC ID: 2BPIZ-RMSP07

Report No.: AGC00106260201AP02 Page 1 of 4 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC00106260201AP02 Page 2 of 4 BATTERY VIEW OF EUT INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC00106260201AP02 Page 3 of 4 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC00106260201AP02 Page 4 of 4 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) ****************************************End of Report************************************* BT Antenna

Page 1 of 10 RF Exposure Report Report No.: AGC00106260201FH01 FCC ID : 2BPIZ-RMSP07 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Bluetooth Speaker Microphone for Walkie Talkie BRAND NAME : SAMCOM MODEL NAME : RMSP07 APPLICANT : Shenzhen Uzomi Technology Co., Ltd. DATE OF ISSUE : Mar. 05, 2026 STANDARD(S) : FCC Part 2 Subpart J §2.1093 FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC00106260201FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 05, 2026 Valid Initial Release Report No.: AGC00106260201FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC00106260201FH01 Page 4 of 10 1. General Information Applicant Shenzhen Uzomi Technology Co., Ltd. Address 204, Taizi Industrial Zone, No. 1 Baihua Road, Laowei Village, Buji Community, Buji Subdistrict, Longgang District, Shenzhen City, Guangdong Province, China Manufacturer Guangdong Samzuk Technology Co., Ltd Address 2/F of Ming Huang Electrical Park 3rd Science Road, High-Tech Zone Heyuan City Guangdong China Factory Guangdong Samzuk Technology Co., Ltd Address 2/F of Ming Huang Electrical Park 3rd Science Road, High-Tech Zone Heyuan City Guangdong China Product Designation Bluetooth Speaker Microphone for Walkie Talkie Brand Name SAMCOM Test Model RMSP07 Series Model(s) N/A Difference Description N/A Date of receipt of test item Feb. 04, 2026 Date of Test Feb. 04, 2026 to Mar. 05, 2026 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Cici Li (Project Engineer) Mar. 05, 2026 Reviewed By Bibo Zhang (Reviewer) Mar. 05, 2026 Approved By Angela Li (Authorized Officer) Mar. 05, 2026 Report No.: AGC00106260201FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version V1.2 Software Version V1.8 Modulation Type BR GFSK, EDR π /4-DQPSK, 8DPSK Maximum Transmitter Power -9.233dBm Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 2.499dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC00106260201FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC00106260201FH01 Page 7 of 10 3.3 Environmental Conditions NORMAL CONDITIONS Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power su…

Text truncated - open the document above for the full version.

2.4G-2.48G PCBA Antenna Test Report SPECIFICATIONS Frequency（MHz）2400-2480 Peak Gain（dBi）2.499 Average Gain（dBi）＞-4 VSWR＜3.2 Impedance（Ω）50Ω Antenna TypePlannar bipolar Antenna on board PolarizationLinear Test environment: Zhongke Guoji anechoic chamber testing system Z X Y Address：Room 501, Zongtai Business Center, Building B15, Yintian Industrial Zone, Yantian Community, Xixiang Subdistrict, Bao'an District, Shenzhen City Antenna physical dimensions Passive antenna S-parameters: VSWR, Return Loss, and Smith chart Antenna efficiency and gain Frequency（MHz）Gain（dBi）Effciency（%）AverageGain（dBi）Efficiency（dB ） 24001.43359.329%-2.717-2.267 24100.92751.861%-3.416-2.852 2420 0.82952.112%-3.166-2.831 24300.88149.299%-3.258-3.072 24401.19250.672%-3.144-2.952 2450 1.68853.067%-2.735-2.752 24602.19459.423%-2.276-2.260 24702.11856.680%-2.438-2.466 2480 2.49961.727%-2.112-2.095 Average1.52954.908%-2.806-2.616 Peak2.49961.727%-2.112-2.095 2440MHz 2D-Theta Pattern 2440MHz 2D-Phi Pattern 2440MHz 3D-Horizontal Pattern 2440MHz 3D-Vertical Pattern 2440MHz3D-TotalPattern

Page 1 of 67 FCCTestReport ReportNo.:AGC00106260201FR01 FCCID:2BPIZ-RMSP07 APPLICATIONPURPOSE:OriginalEquipment PRODUCTDESIGNATION:BluetoothSpeakerMicrophoneforWalkieTalkie BRANDNAME:SAMCOM MODELNAME:RMSP07 APPLICANT:ShenzhenUzomiTechnologyCo.,Ltd. DATEOFISSUE:Mar.05,2026 STANDARD(S):FCCPart15SubpartC§15.247 REPORTVERSION:V1.0 AttestationofGlobalCompliance(Shenzhen)Co.,Ltd ReportNo.:AGC00106260201FR01 Page2of67 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/Mar.05,2026ValidInitialRelease ReportNo.:AGC00106260201FR01 Page3of67 TableofContents 1.GeneralInformation..........................................................................................................................................5 2.ProductInformation..........................................................................................................................................6 2.1ProductTechnicalDescription....................................................................................................................6 2.2TestFrequencyList.....................................................................................................................................6 2.3RelatedSubmittal(S)/Grant(S).................................................................................................................7 2.4TestMethodology........................................................................................................................................7 2.5ReceiverInputBandwidth...........................................................................................................................7 2.6EquallyAverageUseofFrequenciesandBehaviour.................................................................................7 2.7PseudorandomFrequencyHoppingSequence.........................................................................................8 2.8SpecialAccessories....................................................................................................................................9 2.9EquipmentModifications.............................................................................................................................9 2.10AntennaRequirement...............................................................................................................................9 3.TestEnvironment............................................................................................................................................10 3.1AddressofTheTestLaboratory................................................................................................................10 3.2TestFacility................................................................................................................................................10 3.3EnvironmentalConditions.........................................................................................................................11 3.4MeasurementUncertainty.........................................................................................................................11 3.5ListofEquipmentUsed.............................................................................................................................12 4.SystemTestConfiguration............................................................................................................................14 4.1EUTConfiguration....................................................................................................................................14 4.2EUTExercise............................................................................................................................................14 4.3ConfigurationofTestedSystem................................................................................................................14 4.4EquipmentUsedinTestedSystem..........................................................................................................15 4.5SummaryofTestResults..........................................................................................................................16 5.DescriptionofTestModes.............................................................................................................................17 6.RFOutputPowerMeasurement....................................................................................................................18 6.1ProvisionsApplicable................................................................................................................................18 6.2MeasurementProcedure..........................................................................................................................18 6.3MeasurementSetup(BlockDiagramofConfiguration)...........................................................................18 6.4MeasurementResult.................................................................................................................................19 7.20dBBandwidthand99%OccupiedBandwidthMeasurement...............................................................23 7.1ProvisionsApplicable................................................................................................................................23 7.2MeasurementProcedure..........................................................................................................................23 7.3MeasurementSetup(BlockDiagramofConfiguration)...........................................................................23 7.4MeasurementResults...............................................................................................................................24 8.ConductedBandEdgeandOut-of-BandEmissions..................................................................................28 8.1ProvisionsApplicable......................................................................................................…

Text truncated - open the document above for the full version.

ReportNo.:AGC00106260201FR01 Page41of67 Test_Graph_EDR_ANT1_2402_2Mbps_LowerBandEdgeEmissions Test_Graph_EDR_ANT1_2480_2Mbps_HigherBandEdgeEmissions ReportNo.:AGC00106260201FR01 Page42of67 Test_Graph_EDR_HOP_ANT1_NA_2Mbps_LowerBandEdgeEmissions Test_Graph_EDR_HOP_ANT1_NA_2Mbps_HigherBandEdgeEmissions ReportNo.:AGC00106260201FR01 Page43of67 9.RadiatedSpuriousEmission 9.1MeasurementLimit  15.209Limitinthebelowtablehastobefollowed Frequencies (MHz) FieldStrength (microvolts/meter) MeasurementDistance (meters) 0.009~0.4902400/F(kHz)300 0.490~1.70524000/F(kHz)30 1.705~30.03030 30~881003 88~2161503 216~9602003 Above9605003 Note:Allmodesweretestedforrestrictedbandradiatedemission,thetestrecordsreportedbelowaretheworst resultcomparedtoothermodes. 9.2MeasurementProcedure 1.TheEUTwasplacedonthetopoftheturntable0.8or1.5meteraboveground.Thephasecenterofthe receivingantennamountedonthetopofaheight-variableantennatowerwasplaced3metersfaraway fromtheturntable. 2.PowerontheEUTandallthesupportingunits.Theturntablewasrotatedby360degreestodeterminethe positionofthehighestradiation. 3.Theheightofthebroadbandreceivingantennawasvariedbetweenonemeterandfourmetersabove groundtofindthemaximumemissionsfieldstrengthofbothhorizontalandverticalpolarization. 4.Foreachsuspectedemission,theantennatowerwasscan(from1Mto4M)andthentheturntablewas rotated(from0degreeto360degrees)tofindthemaximumreading. 5.Setthetest-receiversystemtoPeakorCISPRquasi-peakDetectFunctionwithspecifiedbandwidthunder MaximumHoldMode. 6.Foremissionsabove1GHz,insertthe2.4GfilterbetweenthereceivingantennaandthePre-amplifier(only forRadiatedSpuriousEmission).Use1MHzRBWand3MHzVBWforpeakreading.Placethe measurementantennaawayfromeachareaoftheEUTdeterminedtobeasourceofemissionsatthe specifiedmeasurementdistance,whilekeepingthemeasurementantennaaimedatthesourceof emissionsateachfrequencyofsignificantemissions,withpolarizationorientedformaximumresponse. ThemeasurementantennamayhavetobehigherorlowerthantheEUT,dependingontheradiation patternoftheemissionandstayingaimedattheemissionsourceforreceivingthemaximumsignal.The finalmeasurementantennaelevationshallbethatwhichmaximizestheemissions.Themeasurement antennaelevationformaximumemissionsshallberestrictedtoarangeofheightsoffrom1mto4m abovethegroundorreferencegroundplane. ReportNo.:AGC00106260201FR01 Page44of67 7.Whentheradiatedemissionslimitsareexpressedintermsoftheaveragevalueoftheemissions,and pulsedoperationisemployed,themeasurementfieldstrengthshallbedeterminedbyaveragingoverone completepulsetrain,includingblankingintervals,aslongasthepulsetraindoesnotexceed0.1seconds. Asanalternative(providedthetransmitteroperatesforlongerthan0.1seconds)orincaseswherethe pulsetrainexceeds0.1seconds,themeasuredfieldstrengthshallbedeterminedfromtheaverage absolutevoltageduringa0.1secondintervalduringwhichthefieldstrengthisatitsmaximumvalues. 8.IftheemissionsleveloftheEUTinpeakmodewas3dBlowerthantheaveragelimitspecified,then testingwillbestoppedandpeakvaluesofEUTwillbereported,otherwise,theemissionswhichdonot have3dBmarginwillberepeatedonebyoneusingthequasi-peakmethodforbelow1GHz. 9.Fortestingabove1GHz,theemissionsleveloftheEUTinpeakmodewaslowerthanaveragelimit(that meanstheemissionslevelinpeakmodealsocomplieswiththelimitinaveragemode),thentestingwillbe stoppedandpeakvaluesofEUTwillbereported,otherwise,theemissionswillbemeasuredinaverage modeagainandreported. 10.Incasetheemissionislowerthan30MHz,loopantennahastobeusedformeasurementandtherecorded datashouldbeQPmeasuredbyreceiver.High-Lowscanisnotrequiredinthiscase. Thefollowingtableisthesettingofspectrumanalyzerandreceiver. SpectrumParameterSetting Start~StopFrequency9KHz~150KHz/RB200HzforQP Start~StopFrequency150KHz~30MHz/RB9KHzforQP Start~StopFrequency30MHz~1000MHz/RB120KHzforQP Start~StopFrequency 1GHz~26.5GHz 1MHz/3MHzforPeak,1MHz/3MHzforAverage ReceiverParameterSetting Start~StopFrequency9KHz~150KHz/RB200HzforQP Start~StopFrequency150KHz~30MHz/RB9KHzforQP Start~StopFrequency30MHz~1000MHz/RB120KHzforQP ReportNo.:AGC00106260201FR01 Page45of67 Quasi-PeakMeasurementsbelow1GHz 1.Analyzercenterfrequencywassettothefrequencyoftheradiatedspuriousemissionofinterest 2.Spanwassetgreaterthan1MHz 3.RBW=asshowninthetableabove 4.Detector=CISPRquasi-peak 5.Sweeptime=autocouple 6.Tracewasallowedtostabilize PeakMeasurementsabove1GHz 1.Analyzercenterfrequencywassettothefrequencyoftheradiatedspuriousemissionofinterest 2.RBW=1MHz 3.VBW=3MHz 4.Detector=peak 5.Sweeptime=autocouple 6.Tracemode=maxhold 7.Tracewasallowedtostabilize AverageMeasurementsabove1GHz 1.Analyzercenterfrequencywassettothefrequencyoftheradiatedspuriousemissionofinterest 2.RBW=1MHz 3.VBW=[3×RBW] 4.Detector=Poweraveraging(rms) 5.Averagingtype=power(i.e.,rms) 6.Sweeptime=auto 7.Performatraceaverageofatleast100traces. ReportNo.:AGC00106260201FR01 Page46of67 9.3MeasurementSetup(BlockDiagramofConfiguration) RadiatedEmissionTestSetup9KHz-30MHz RadiatedEmissionTestSetup30MHz-1000MHz RadiatedEmissionTestSetupAbove1000MHz ReportNo.:AGC00106260201FR01 Page47of67 9.4MeasurementResult RadiatedEmissionBelow30MHz Theamplitudeofspuriousemissionsfrom9kHzto30MHzwhichareattenuatedmorethan20dBbelowthe permissiblevalueneednotbereported. RadiatedEmissionTestResultsat30MHz-1GHz EUTName BluetoothSpeakerMicrophoneforWalkie Talkie ModelNameRMSP07 Temperature18.4°CRelativeHumidity51.6% Pressure960hPaTestVoltageDC3.7Vbybattery TestModeMode5AntennaPolarityHorizontal FinalDataList NO. Freq. [MHz] Level [dBμV/m] Factor [dB] Limit [dBμV/m] Margin [dB] Height [cm] Angle [°] Polarity 150.232412.87-26.7740.0027.13100106Horizontal 263.313213.81-25.3540.0026.19100129Horizontal 3156.457818.54-20.5643.5024.9610086Horizontal 4383.931822.22-17.7046.0023.78100148Horizontal 5647.385626.00-12.9846.0020.010035Horizontal 6821.710329.72-9.5846.0016.28100215Horizontal ReportNo.:AGC00106260201FR01 Page48of67 RadiatedEmissionTestResultsat30MHz-1GHz EUTName BluetoothSpeakerMicrophoneforWalkie Talkie ModelNameRMSP07 Temperature18.4°CRelativeHumidity51.6% Pressure960hPaT…

Text truncated - open the document above for the full version.

Report No.: AGC00106260201AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC00106260201AP01 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************