2BVGW-DC2521MLB AND MQB KEY PROGRAMMER

IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully, paying extra attention to the safety warnings and precautions. Use this unit correctly and with care. Failure to do so may cause damage and/or personal injury and will void the limited prod- uct warranty. Email: [email protected] Web: www.autel.com Thank you for purchasing this Autel tool. Our tools are manufactured to a high standard and — when used according to these instructions and properly maintained — will provide years of trouble-free performance. APB300 APB300 MLB AND MQB KEY PROGRAMMER 1 2 1. Vehicle Key Slot — holds the vehicle key 2. Status LED — illuminates solid red at power up and illuminates solid green when working properly and ready for use 3. Data Collection Port (Header 10) 4. DC Power Supply Input Port 5. USB Type-C Port Quick Reference Guide GETTING STARTED Connection Diagram Precautions: 1. The APB300 key programmer needs to be used together with the Autel IMMO tablet. Do not disconnect the USB cable when in use. 2. If the tablet does not have a USB Type-A port, please use your own USB-C to USB-C cable or a compatible USB adapter for device connection. 3. The supplied terminal wire should be welded when prompted by the on-screen instructions on the tablet. Compliance Information Autel Intelligent Technology Corp., Ltd. hereby declares that the radio equipment type APB300 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.autel.com/download.jhtml. 1. Connect the APB300 to the Autel IMMO tablet using the supplied USB cable. 2. Once connected, the status LED will illuminate solid green, indicating that the APB300 is working properly and ready for use. 3. Power up the tablet. Ensure the tablet has a charged battery or is connected to a DC power source. 4. Select the vehicle and follow the on-screen instructions to perform the required functions. 345 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. RF exposure statement: The equi pment compli es with IC Radiation exp osure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Déclaration d'exposition RF: L'équipement est confo rme à la limite d'expo s ition aux radiatio ns de la IC ét ablie po ur un environnement non cont rôlé. Cet équi pement doit être install é et utilisé avec une di stance minimale de 10 cm entre le radiateur et votre corps. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. Cet équip ement est confo rme aux limites d'ex position aux radiat ions IC CNR-102 éta blies pour un environnement non contrôlé. FCC Information and Copyright This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes o r modifications not ex pressly approved by the p arty responsible for compliance could v oid the u ser's aut hority to operate th e equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

NEREBELZHA VIETNAM CO., LTD Attestation Statements Not Covered EntityApplicant&Not Covered Equipment To: Federal Communications CommissionDate: Apr. 9, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i)& (ii) FCC ID: 2BVGW-DC2521 NEREBELZHA VIETNAM CO., LTD (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section§ 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Jingpei Tan Title: Department Head Address: Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Tel.: +84 0968205886 Email: [email protected]

NEREBELZHA VIETNAM CO., LTD 1| P a g e Attestation Statements To: Federal Communications Commission Date: Apr. 9, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2BVGW-DC2521 Product Name: MLB AND MQB KEY PROGRAMMER This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendixevaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Jingpei Tan Title: Department Head Address: Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Tel.: +84 0968205886 Email: [email protected] NEREBELZHA VIETNAM CO., LTD 2| P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacitylimitation for store or install the Cybersecurity or anti-virus software. Compliance ☐ Operatingsystem used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 2 3

NEREBELZHA VIETNAM CO., LTD (2026-04-08) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BVGW-DC2521 I, the undersigned, hereby authorize Shenzhen HongBiao Certification& Testing Co., Ltd to act on our behalfin all matters relating to this application for equipment certification. Any act carried out by Shenzhen HongBiao Certification& Testing Co., Ltd shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with NEREBELZHA VIETNAM CO., LTD We certify that we are not subject to a denial of federal benefits that includes FCC benefitspursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no partyto the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely yours, Applicant Signature Printed Name: Jingpei Tan Title: Department Head Address: Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Tel.: +84 0968205886 Email: [email protected]

NEREBELZHA VIETNAM CO., LTD (2026-04-08) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BVGW-DC2521 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby requestpermanent confidential treatment of the exhibits accompanying thiscertification application as outlined below :  Block Diagram  Schematics  Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Sincerely yours, Applicant Signature Printed Name: Jingpei Tan Title: Department Head Address: Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Tel.: +84 0968205886 Email: [email protected]

Ext Photos Model: APB300 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

Label and Label Location Model: APB300 Label： Label Location： Label&location

Int Photos Model: APB300 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 上 ANT

- Page 1 of 10 - Report No.: HB20260119004E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: MLB AND MQB KEY PROGRAMMER Trade Mark: AUTEL Model Number: APB300 FCC ID: 2BVGW-DC2521 Prepared for NEREBELZHA VIETNAM CO., LTD Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 10 - Report No.: HB20260119004E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE..................................................................................................................................................... 8 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 8 4.1.1. Limit ............................................................................................................................................................ 8 4.1.2. Test Procedures ........................................................................................................................................... 8 4.1.3. Test Setup .................................................................................................................................................... 8 4.1.4. Test Result ................................................................................................................................................... 8 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................10 - Page 3 of 10 - Report No.: HB20260119004E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : NEREBELZHA VIETNAM CO., LTD Address ................................. : Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Manufacturer's Name .......... : Autel Intelligent Technology Corp., Ltd. Address ................................. : Floor 2, Caihong Keji Building, 36 Hi-tech North Six Road, Songpingshan Community, Xili, Nanshan, Shenzhen 518055, China Product description Product name ........................ : MLB AND MQB KEY PROGRAMMER Model Number ....................... : APB300 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Jan 13, 2025~ Jan 28, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e S u ) Technical Manager : (Ming Liu) Authorized Signatory : ( L e o S u ) - Page 4 of 10 - Report No.: HB20260119004E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Jan 28, 20…

Text truncated - open the document above for the full version.

- Page 1 of 26 - Report No.: HB20260119004E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: MLB AND MQB KEY PROGRAMMER Trade Mark: AUTEL Model Number: APB300 FCC ID: 2BVGW-DC2521 Prepared for NEREBELZHA VIETNAM CO., LTD Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 26 - Report No.: HB20260119004E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 6 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................... 7 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 8 4 LIST OF TEST EQUIPMENT .................................................................................................................................10 5 TEST ITEM AND RESULTS ...................................................................................................................................12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 23 6 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................24 7 PHOTOGRAPHS OF THE EUT..............................................................................................................................26 - Page 3 of 26 - Report No.: HB20260119004E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : NEREBELZHA VIETNAM CO., LTD Address ................................. : Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Manufacturer's Name .......... : Autel Intelligent Technology Corp., Ltd. Address ................................. : Floor 2, Caihong Keji Building, 36 Hi-tech North Six Road, Songpingshan Community, Xili, Nanshan, Shenzhen 518055, China Product description Product name ........................ : MLB AND MQB KEY PROGRAMMER Model Number ....................... : APB300 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Jan 13, 2025~ Jan 28, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e S u ) Technical Manager : (Ming Liu) Authorized Signatory : ( L e o S u ) - Page 4 of 26 - Report No.: HB20260119004E-01 Add:Room 102, 201, Building 2, Yuanwanggu R…

Text truncated - open the document above for the full version.

客户：深圳市道通合创数字能源有限公司型号：LB62A19635 承制方：深圳市海光电子有限公司第 1 页共6页 拟制：梁贵传审核：李勇批准：蒋韫涛 编号：F-TD-013A 产品名称：骨架电感 客户型号：骨架电感 客户编码：204010605 承制方型号：LB62A19635 版本：A02 日期：2025-12-23 承制方确认使用方确认 拟制审核批准 开发 审核 项目 审核 工艺 审核 品质 审核 梁贵传李勇蒋韫涛 深圳市道通合创数字能源有限公司 承认书 SPECIFICATIONFORAPPROVAL 承制方：深圳市海光电子有限公司 地址：深圳石岩塘头第三工业区11栋 电话：0755-29516395 传真：0755-29516393 电子邮件：[email protected] 客户：深圳市道通合创数字能源有限公司型号：LB62A19635 承制方：深圳市海光电子有限公司第 2 页共6页 拟制：梁贵传审核：李勇批准：蒋韫涛 编号：F-TD-013A 版本更改内容更改人更改日期 A00设计方案梁贵传2025-11-13 A01骨架优化梁贵传2025-12-19 A02引脚焊锡部分5ref改为3+1/-2梁贵传2025-12-23 客户：深圳市道通合创数字能源有限公司型号：LB62A19635 承制方：深圳市海光电子有限公司第 3 页共6页 拟制：梁贵传审核：李勇批准：蒋韫涛 编号：F-TD-013A 质量责任原则 (THEPRINCIPLEOFQUALITYRESPONSIBILITY) 未列入承认书的参数请参考下列标准或相关行业标准： GB/T15290-94电子设备用电源变压器和滤波扼流圈总技术条件。 GB2423电工电子产品基本环境试验规程 GB2828逐批检查计数抽样程序及抽样表(适用于连续批的检查) GB2829周期检查计数抽样程序及抽样表(适用于生产过程稳定性的检查)。 GB8554电子和通信设备用变压器和电感器测试方法及试验程序。 GB4943-2001信息技术的安全。 SJ2488电子设备用变压器、阻流和铁芯噪声测试方法。 SJ2916-88彩色电视广播接收机用开关电源变压器总技术条件。 SJ3270-90隔离变压器的安全要求。 GJB360A-96《电子及电气元件试验方法》 IEC1007《Transformerandinductorsforuseinelectronicandtelecommunicationequipment— Measuringmethodsandtestprocedures》 产品符合 ROHS 或其它环保要求( ROHSorotherenvironmentalrequest) 客户：深圳市道通合创数字能源有限公司型号：LB62A19635 承制方：深圳市海光电子有限公司第 4 页共6页 拟制：梁贵传审核：李勇批准：蒋韫涛 编号：F-TD-013A 1.安装尺寸及外形图(CONFIGRATION&DIMENSIONS)未注尺寸公差按 ±0.5mm 2.推荐焊盘(LAYOUTRECOMMENDATION) 3.内部结构图(WINDINGCONSTRUCTION) 4.线圈联线图(SCHEMATIC) 5.绕制工艺要求 (Windingprocessrequirement) NO. 线圈 名称 起始 引脚号 收尾 引脚号 导线规格匝数端空绕线方式绝缘层 1N1SF 2UEW-FФ 0.18MM*1P 81TS/密绕/ 5.1.客供骨架;骨架上印字HGYYWW标识厂商及周期，镭雕或者喷码 5.2绕线后起线收线使用UV胶固定（用紫外线型固化）覆盖区域见外观图标识， 焊 锡 尺 寸 胶固定起收线 标签印字在靠圆孔侧 出脚在此面非圆孔， 骨架带有字的一边 HGYYWW 焊 锡 尺 寸 客户：深圳市道通合创数字能源有限公司型号：LB62A19635 承制方：深圳市海光电子有限公司第 5 页共6页 拟制：梁贵传审核：李勇批准：蒋韫涛 编号：F-TD-013A 6.电气参数(ELECTRICCHARACTERICS) NO.名称测量端测量值测试条件测试仪器 1电感量 L(S--F) 680±10uH120KHz,1V,25°C TH2816 或等同 2Q值 Q(S--F) 36MIN120KHz,1V,25 3直流电阻 DCR(S--F) 10ΩMAX25°C2511 7.MATERIALLIST ITEMTYPEMATERLAL SPEC MANUFACTUREULNO.ROHS °CUL94 WIRE UEWF@$ MW79C155/TAI-ICOPPER(GUANZHOU)COLTDE234896Y R-UEW-F-1 MW79C155/HENGYAELECTRIC(DONGGUAN)LTDE197768Y UEWF/U@ MW79C155/PACIFICELECTRICWIRE&CABLE(SHENZHEN)COLTDE201757Y BOBBIN 57*59*6m m 胶件 150 94V-0 客供/ Y Adhesive UV UV2010 / Hengerlang / Y 8.可靠性试验要求(RELIABILITYTESTREQUIREMENT) (必选项目所要求的项目供应商必须完成，其它项目由供应商自行决定，但必须确保产品的质量。) / 9.推荐焊接条件 (SOLDERINGCONDITIONRECOMMENDED) 9.1焊接方法 元器件的组装方式是***。 9.2A波峰焊焊接方式 波峰焊温度：255 O C±5 O C；时间：不少于7秒。 波峰焊预热温度：100至160 O C；时间：不少于10秒。 9.2B回流焊焊接方式 客户：深圳市道通合创数字能源有限公司型号：LB62A19635 承制方：深圳市海光电子有限公司第 6 页共6页 拟制：梁贵传审核：李勇批准：蒋韫涛 编号：F-TD-013A 9.3高温耐热性： 在260°C的熔融钎料中，停留时间不少于10秒，无质量问题。 9.4返修温度和时间 温度：400 O C；时间：不少于5秒。 9.5焊接次数： 元器件能承受的焊接次数不少于5次。 10.包装及外观要求 (PACKAGEANDSEMBLABLEREQUIREMENT) 10.1包装(PACKAGEREQUIREMENT) 1)包装箱上应标明产品型号、名称、数量、出厂日期、承制方名称及出厂检验章； 2)货物运达客户方后，包装箱封条应完好，箱体无破损、开裂等现象； 3)电感用木箱或其他材料包装，方便拆卸；包装整箱重量不超15kg； 10.2外观(SEMBLABLEREQUIREMENT) 1)产品应有合格证和耐擦防水洗标签，应注明型号、规格； 2)产品外观整洁，应无破损、划伤； 10.3检验(TESTREQUIREMENT) 1)产品生产中必须全数进行电气性能，抗电强度检测；箱内应有100%电气性能合格保证书或检测报告； 2)产品出货前按批次，必须根据承认书按国家行业标准进行抽样检验，合格后出具出厂检验 报告，记录抽样测试数据，在每批次包装尾箱中放置一份；检验报告须注明100％耐压测 试合格。注：批次按定单号发货为准。

Ext Photos Model: APB300 Radiated Emission Below 30MHz Radiated Emission Above 30MHz Conducted Emission