A3LSCHA105Dual-Mode Cellular Phone (AMPS/CDMA)

PORTABLE CELLULAR TELEPHONE SCH-A105 User’s Manual Printed in KoreaCode No. : GH68-xxxxxAEnglish. 2000/04. Rev.1.0 ELECTRONICS World Wide Webhttp://www.samsungmobile.com 1 Contents GETTING STARTED Unpacking ..............................................................................................7 Phone Layout .........................................................................................8 Key Functions ......................................................................................8 Display .................................................................................................10 Icons .................................................................................................10 Installing Battery ...................................................................................11 To Install the Battery .........................................................................11 To Remove the Battery ......................................................................12 Charging a Battery ................................................................................13 Low Battery Indicator ........................................................................14 Switching the Phone On/Off ..................................................................15 GENERAL FUNCTIONS Making a Call ........................................................................................16 Correcting the Number ......................................................................16 Ending a Call .....................................................................................16 Emergency Dialing ............................................................................17 Prepend Dialing ................................................................................17 Making a Call from the Phone Book ......................................................18 To Search an Entry, Then Dial ............................................................18 To Search a Name, Then Dial .............................................................18 Speed Dial ............................................................................................19 One-Touch Dial ..................................................................................19 Two-Touch Dial ..................................................................................19 Three-Touch Dial ...............................................................................20 Voice Dialing ........................................................................................21 Last Number Redial ...............................................................................21 Answering a Call ....................................................................................22 Viewing Missed Calls ..............................................................................22 In-Call Options .......................................................................................23 Call Waiting ......................................................................................24 Three-Way Calling..............................................................................24 Call Forwarding..................................................................................25 Adjusting the Volume..............................................................................25 Quick Switching to Vibration Mode .........................................................26 Recording a Voice Memo ........................................................................26 Table of ContentsFCC RF EXPOSURE INFORMATION In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. Body-worn Operation This device was tested for typical body-worn operations using the optional belt-clip/holster placed 0.8 inches (2.1cm) from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 0.8 inches (2.1cm) must be maintained between the user’s body and the phone, including the antenna, whether extended or retract- ed. Third-party belt-clips, holsters and similar accessories used by this device must meet the separation distance requirement of 0.8 inches (2.1cm) from the body and should not contain metallic componants. Body-worn accessories that do not meet these requirements may not comply with FCC RF exposure limits and should be avoided. For more information about RF exposure, please visit the FCC website at www .fcc.gov 2 Contents 3 Contents USING THE MENUSUsing the Navigation Keys ..................................................................... 28Using the Index System ......................................................................... 29Menu Map ............................................................................................. 30CALLSOutgoing (MENU 1-1) ..................................................................... 32 Incoming (MENU 1-2) ..................................................................... 33 Erase Logs (MENU 1-3) ................................................................... 34 Air Time (MENU 1-4) ................................................................…

Text truncated - open the document above for the full version.

April 13, 2000 Federal Communications Commission Authorization and Evaluation Div. Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 2 1046 To whom it may concern: We, the undersigned, hereby authorize PCTEST Engineering Laboratory Inc., to act as agent on behalf of all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by PCTEST Engineering Laboratory, Inc. on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C.853(a) Sincerely, Wallace Oh Engineering Manager Samsung Electronics America

March 13, 2000 Federal Communications Commission Authorization and Evaluation Div. Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 In re: Samsung Electronics Co., Ltd. FCC ID.:A3LSCHA105 Request for Confidentiality To whom it may concern: In accordance with 0.459 of CFR 47, Samsung Electronics Co., Ltd. requests confidentiality for the Block Diagram, Schematics, and Circuit Description of the attached test report. These documents contain detailed system and equipment description and related information about the product which Samsung Electronics Co., Ltd. considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Samsung feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market.

AFFIDAVIT FOR ESN PROTECTION OF CELLULAR MOBILE TELEPHONES We hereby certify that the Portable Cellular Telephone (FCC ID:A3LSCHA105) is so designed that it complies with all the requirements for ESN protection specified in Sec.22.919 of the FCC Rules. a) The transmitter in service has a unique ESN. b) The ESN host component is permanently attached to a main circuit board of the mobile transmitter and the integrity of the unit operating software cannot be altered. The ESN is plated from fraudulent contact and tampering. The ESN is encoded using multiplication by a polynomial and the ESN data programmed in the memory with other information. c) The ESN is factory set and cannot be altered, transferred, removed or otherwise able to be manipulated. Cellular mobile equipment is specifically designed such that any attempt to remove, tamper with, or change the ESN chip, its logic system, or firmware originally programmed by the manufacturer will render the mobile transmitter inoperative.

April 13, 2000 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: FCC E911 REQUIREMENTS PER §22.921 Gentlemen: Samsung Electronics Co., Ltd. hereby certifies that the analog cellular telephone (FCC ID: A3LSCHA105), using the Automatic A/B Roaming – Intelligent Retry method, meets the E911 requirements specified in Section 22.921 of the FCC Rules. This procedure recognizes when a “9-1-1” call is made and, at such time, will override any programming in the mobile unit that determines the handling of a non-911 call and permit the call to be handled by other analog carriers. Should you have any questions or comments concerning the above, please contact the undersigned.

April 24, 2000 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT: SAMSUNG ELECTRONICS CO., LTD. FCC ID: A3LSCHA105 Part 22 Certification Gentlemen: Attached herewith, on behalf of SAMSUNG ELECTRONICS CO., LTD. is an application for Part 22 Certification of the following Dual-Mode Cellular Phone (AMPS/CDMA): FCC ID: A3LSCHA105 TRADE / MODEL(s): SAMSUNG SCH-A105 EUT TYPE: Non-Broadcast Transmitter held to ear (TNE) Tx Freq. Range: 824.04 – 849.97 MHz (AMPS) 824.70 – 848.31 MHz (CDMA) Rx Freq. Range: 869.04 – 893.97 MHz (AMPS) 869.70 – 848.31 MHz (CDMA) Max. RF Output Power: 0.425 W ERP AMPS (26.28 dBm) 0.378 W ERP CDMA (25.77 dBm) Attached is the applicant’s Letter of Authorization, Confidentiality Request, ESN Affidavit, E911 Compliance Statement, measurement report data and plots, RF Exposure measurement report, FCC ID label and location, test setup photographs, internal and external photographs, block diagrams (confidential), schematic diagrams & circuit description (confidential), operational description, parts list & tune-up procedure, and the user's manual. Should you have any questions or comments concerning the above, please contact the undersigned. cc: Mr. Wallace Oh Engineering Manager SAMSUNG American QA Lab

May 5, 2000 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 Attn: Errol Chang / Kwok Chan SUBJECT:SAMSUNG ELECTRONICS CO., LTD FCC ID: A3LSCHA105 731 Confirmation Number: EA97488 Correspondence Reference No.: 13843 Dear Frank / Kwok: Submitted herewith, on behalf of Samsung Electronics Co., Ltd., is an amendment in response to your e- mail dated May 5, 2000 requesting additional information for the subject application. 1. Attached is the revised AMPS ERP data page showing the correct frequency used for testing the extended battery option. 2. We have re-uploaded the users manual warning statement indicating the specific belt-clip/leather case. 3. Attached is a revised tune-up procedure page. We trust this information is sufficient to issue the grant asap. If you have any further questions, please do not hesitate to contact us. Thank you. Sincerely, cc:Mr. Wallace Oh, Engineering Manager SAMSUNG ELECTRONICS CO., LTD.

© 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd.

© 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd.

© 2000 PCTEST Lab FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §§ 2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. (SEE NEXT PAGE) MODEL NO: SCH-A105 FCC ID: A3LSCHA105 CANADA: MADE IN KOREA

© 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd. © 2000 PCTEST Lab FCC ID: A3LSCHA105 NVLAP Lab Code: 100431-0 SAMSUNG Electronics Co., Ltd.

1.SPECIFICATION 1.GENERAL FreqencyRange Transmitter Receiver CDMAMODE 824.64~848.37MHz 869.64~893.37MHz ANALOGMODE 824~849MHz 869~894MHz ChannelSpacing1.23MHz30KHz NumberofChannels20FA832CHs DuplexSpacing45MHz FrequencyStability °æ 300Hz °æ 2.5ppm OperatingTemperature-20 °... ~+50 °... (-4~+122 ¢μ ) OperatingVoltage HHP 3.6VDC( °æ 10%) SizeandWeight Includingslimbattery Includingstandard battery 80x42x22mm(slim), 80x42x24mm(standard) 93g 116g OperatingTime StandbyTime TalkTime CDMAMODE 40~100hours (withslimbattery) 70~170hours (withstandardbattery) 150min (withslimbattery) 250min (withstandardbattery) ANALOGMODE 4~5hours (withslimbattery) 8~9hours (withstandardbattery) about45min (withslimbattery) about100min (withstandardbattery) RECEIVER De-Emphasis-6dB/OCTwithin0.33KHZ Expandor ExpandorRate AttackTime RecoveryTime ReferenceInput 1:2 within3ms within13.5ms outputleveltoa1000Hztonefroma carrierwithin °æ 2.9KHz peakfrequencydeviation sensitivity12dBSINAD/-116dBm IntermodulationSpuriousResponse Attenuation above65dB RSSIRangeabove60dB ProtectionAgainstSpuriousResponse Interface above60dB InBandConductedSpuriousEmission TransmitBand ReceiveBand below-60dBm below-80dBm OutofBandConductedSpuriousEmissionbelow-47dBm RadiatedSpuriousEmission FrequencyRange 25~70MHz 70~130MHz 130~174MHz 174~260MHz 260~470MHz 470~1GHz MaximumAllowableEIRP -45dBm -41dBm -41~-32dBm -32dBm -32~-26dBm -21dBm 2.FMMODE TRANSMITTER RFoutputpower0.6W(+2/-4dB) CarrierON/OFFcondition "ON"Condition "OFF"Condition within °æ 3dBofspecificationoutput(in2ms) below-60dBm(2ms) Compressor CompressionRate AttackTime RecoveryTime ReferenceInput 2:1 3ms 13.5ms Inputlevelforproducinganominal °æ 2.9KHzpeak frequencydeviationoftransmittedcarrier Preamphasis6dB/OCTwithin0.3~3KHz MaximumFrequencyDeviation R3ofG3 SupervisoryAudioTone SignalingTone WidebandData °æ 12KHz °æ 2KHz °æ 8KHz °æ 8KHz PostDeviationlimiterFilter 3.0~5.9KHz 5.9~6.1KHz 6.1~15KHz Over15KHz above40Log(F/3000)dB above35dB above40Log(F/3000)dB above28dB SpectrumNoiseSurpreion Forallmodulation f o +20KHz~f o +45KHz Formodulationbyvoiceand SAT f o +45KHz FormodulationbyWBD(without SAT)andST(withSAT) f o +45KHz~f o +60KHz f o +60KHz~f o +90KHz f o +90KHz~2f o above26dB above63+10Log(PY)dB above45dB above65dB above63+10Log(PY)dB (wheref o =carrierfrequency PY=meanoutputpowerinwatts) HarmonicandconductSpurious Emission below43+10Log(PY)dB CDMAMODE WaveformQualityabove0.944 TimeReferencewithin °æ 1us RxSensitivityand DynamicRange -104dBm,FER=within0.5% -104dBm~-25dBm,FER=within0.5% TxOutputPowerMaximum320mW(25dBm) TxFrequencyDeviationwithin °æ 300Hz OccupiedBandWidth1.32MHz TxConductedSpuriousEmission900KHz:below-42dBc/30KHz 1.98MHz:below-54dBc/30KHz MinimumTxPowerControlbelow-50dBm OpenLoopPowerControl-25dBm:-57.0dBm~-38.5dBm -65dBm:-17.5dBm~+1.5dBm -104dBm:+18.0dBm~+30.0dBm StandbyOutputPowerbelow-61dBm ColsedLoopTxPowerControlRangeTest1:above °æ 24dB Test2:0ms~2.5ms Test3:above °æ 24dB Test4:above °æ 24dB Test5:above °æ 24dB 2.FREQUENCYRANGE TransmitterFrequency FANO.CHNO.CenterFrequency 11011824.64MHz 229825.87MHz 370827.10MHz 4111828.33MHz 5152829.56MHz 6193830.79MHz 7234832.02MHz 8275833.25MHz 9316834.48MHz 10363835.89MHz 11404837.12MHz 12445838.35MHz 13486839.58MHz 14527840.81MHz 15568842.04MHz 16609843.27MHz 17650844.27MHz 18697845.91MHz 19738847.14MHz 20779848.37MHz ReceiverFrequency FANO.CHNO.CenterFrequency 11011869.64MHz 229870.87MHz 370872.10MHz 4111873.33MHz 5152874.56MHz 6193875.79MHz 7234877.02MHz 8275878.25MHz 9316879.58MHz 10363880.89MHz 11404882.12MHz 12445883.35MHz 13486884.58MHz 14527885.81MHz 15568887.04MHz 16609888.27MHz 17650889.27MHz 18697890.91MHz 19738892.14MHz 20779893.37MHz

SEC-CODE B'DPART NO DECRIPTIONREMARK 0405-001035D402DIODE-VARACTOR1SV279,15V,3nA,USC,TP 0405-001035D403DIODE-VARACTOR1SV279,15V,3nA,USC,TP 0405-001035D501DIODE-VARACTOR1SV279,15V,3nA,USC,TP 0405-001035D502DIODE-VARACTOR1SV279,15V,3nA,USC,TP 0406-001051ZD102DIODE-TVSSMS05C,6V,300W,SOT-23-6 0406-001051ZD103DIODE-TVSSMS05C,6V,300W,SOT-23-6 0407-000115D100DIODE-ARRAYDAN202U,80V,100mA,CA2-3,SC-70, 0407-000115D202DIODE-ARRAYDAN202U,80V,100mA,CA2-3,SC-70, 0407-001006D200DIODE-ARRAYDA221,20V,100mA,C2-3,EM3,TR 0407-001006D201DIODE-ARRAYDA221,20V,100mA,C2-3,EM3,TR 0407-001006D500DIODE-ARRAYDA221,20V,100mA,C2-3,EM3,TR 0409-001016D401DIODE-PINBAR63-02W,50V,100mA,SCD-80,TP 0501-000162Q106TR-SMALLSIGNAL2SA1576,PNP,200MW,SOT-323,TP,180-390 0501-000162Q301TR-SMALLSIGNAL2SA1576,PNP,200MW,SOT-323,TP,180-390 0501-000218Q400TR-SMALLSIGNAL2SC4081,NPN,200mW,UMT,TP,180-3 0501-000225Q102TR-SMALLSIGNAL2SC4617,NPN,200mW,EM3,TP,120-5 0501-000225Q108TR-SMALLSIGNAL2SC4617,NPN,200mW,EM3,TP,120-5 0501-002096Q503TR-SMALLSIGNALBFP420,NPN,160MW,SOT-343,TP,50-150 0501-002110Q401TR-SMALLSIGNALAT32033,NPN,200mW,SOT-23,TP,70 0501-002202Q107TR-SMALLSIGNALMMBT2222AWT1,NPN,150mW,SOT-323 0501-002202Q201TR-SMALLSIGNALMMBT2222AWT1,NPN,150mW,SOT-323 0504-000167Q104TR-DIGITALRN1102,NPN,100MW,10K/10K,SSM,TP 0504-000167Q160TR-DIGITALRN1102,NPN,100MW,10K/10K,SSM,TP 0504-000167Q302TR-DIGITALRN1102,NPN,100MW,10K/10K,SSM,TP 0504-000167Q502TR-DIGITALRN1102,NPN,100MW,10K/10K,SSM,TP 0504-000167Q510TR-DIGITALRN1102,NPN,100MW,10K/10K,SSM,TP 0504-000167Q511TR-DIGITALRN1102,NPN,100MW,10K/10K,SSM,TP 0504-000168Q100TR-DIGITALRN1104,NPN,100MW,47K/47K,SSM,TP 0504-000168Q103TR-DIGITALRN1104,NPN,100MW,47K/47K,SSM,TP 0504-000168Q410TR-DIGITALRN1104,NPN,100MW,47K/47K,SSM,TP 0504-000172Q200TR-DIGITALRN2104,PNP,100MW,47K/47K,SSM,TP 0504-000172Q500TR-DIGITALRN2104,PNP,100MW,47K/47K,SSM,TP 0505-001037U502FET-SILICON-,P,-12V,+-2.5A,0.1ohm,1W,TSSO 0505-001119Q402FET-SILICON2SK2685,P,6V,20mA,-,100mW,CMPA 0505-001165Q110FET-SILICONSI3443DV,P,-20V,+-3.5mA,65mohm 0505-001165Q501FET-SILICONSI3443DV,P,-20V,+-3.5mA,65mohm 1001-001048U407IC-ANALOGSWITCHSW395TR,SPDP,SOT-26,6P,-,DUAL, 1103-001184U105IC-EEPROM24C256,32Kx8Bit,dBGA,8P,92MIL,-,2.7V 1109-001133U102IC-ETC.MEMORY84VD21194,2MX8/1MX16Bit,BGA,61P,354MIL 1201-001248U300IC-CASCODEAMP0916,SOT-143,4P,-,-,2.7V,-,6Vd 1201-001248U301IC-CASCODEAMP0916,SOT-143,4P,-,-,2.7V,-,6Vd 1201-001259U500IC-POWERAMP23124,LCC,8P,-,SINGLE,-,PLASTI 9.PARTSLIST 1201-001384U400IC-MMICAMPMD57-0001,SOT-26,6P,114MIL,SIN 1202-000192U200IC-VOLFAGECOMP.75W393,-,8P,-,DUAL,36V,CMOS,PL 1203-001285U403IC-SWITCHVOL.REG.5205,SOT-23,5P,150MIL,PLASTIC, 1203-001285U404IC-SWITCHVOL.REG.5205,SOT-23,5P,150MIL,PLASTIC, 1203-001285U503IC-SWITCHVOL.REG.5205,SOT-23,5P,150MIL,PLASTIC, 1203-001717U201IC-VOLTAGEREGULATOR5210,MSOP,8P,117MIL,PLASTIC,3.0V 1203-001835U101IC-RESET3470,SOT23,5P,-,PLASTIC,0.99/1.01V 1204-001375U202IC-ENCODER/DECODERST5092TQFPTR,QFP,44P,-,PLASTIC 1204-001504U401IC-IFCIRCUITIFR3000,TQFP,48P,-,PLASTIC,3.5V 1204-001505U501IC-IFCIRCUITIFT3000,TQFP,48P,-,PLASTIC,3.5V 1205-001535U504IC-MIXERRF2628,MSOP,8P,190MIL,PLASTIC, 1205-001670U104IC-TRANSCEIVERMSM3000,PBGA,196P,-,PLASTIC,3.5V 1209-001197U302IC-PLLLMX2332LSLB,CSP,20P,-,PLASTIC, 1404-001040R502THERMISTOR-NTC10Kohm,5%,3650K,-,TP 1404-001165TH1THERMISTOR-NTC10KOHM,3%,4100K,30MW/C,TP 2007-000137R143R-CHIP2Kohm,5%,1/16W,DA,TP,1005 2007-000137R330R-CHIP2Kohm,5%,1/16W,DA,TP,1005 2007-000137R405R-CHIP2Kohm,5%,1/16W,DA,TP,1005 2007-000137R526R-CHIP2Kohm,5%,1/16W,DA,TP,1005 2007-000138R101R-CHIP100ohm,5%,1/16W,DA,TP,1005 2007-000138R103R-CHIP100ohm,5%,1/16W,DA,TP,1005 2007-000138R106R-CHIP100ohm,5%,1/16W,DA,TP,1005 2007-000138R108R-CHIP100ohm,5%,1/16W,DA,TP,1005 2007-000138R111R-CHIP100ohm,5%,1/16W,DA,TP,1005 2007-000138R144R-CHIP100ohm,5%,1/16W,DA,TP,1005 2007-000138R302R-CHIP100ohm,5%,1/16W,DA,TP,1005 2007-000139R416R-CHIP220ohm,5%,1/16W,DA,TP,1005 2007-000140R110R-CHIP1Kohm,5%,1/16W,DA,TP,1005 2007-000140R117R-CHIP1Kohm,5%,1/16W,DA,TP,1005 2007-000140R126R-CHIP1Kohm,5%,1/16W,DA,TP,1005 2007-000140R127R-CHIP1Kohm,5%,1/16W,DA,TP,1005 2007-000140R135R-CHIP1Kohm,5%,1/16W,DA,TP,1005 2007-000140R146R-CHIP1Kohm,5%,1/16W,DA,TP,1005 2007-000140R210R-CHIP1Kohm,5%,1/16W,DA,TP,1005 2007-000140R213R-CHIP1Kohm,5%,1/16W,DA,TP,1005 2007-000141R204R-CHIP2.2Kohm,5%,1/16W,DA,TP,1005 2007-000141R309R-CHIP2.2Kohm,5%,1/16W,DA,TP,1005 2007-000142R505R-CHIP2.7Kohm,5%,1/16W,DA,TP,1005 2007-000143R124R-CHIP4.7Kohm,5%,1/16W,DA,TP,1005 2007-000143R187R-CHIP4.7Kohm,5%,1/16W,DA,TP,1005 2007-000143R206R-CHIP4.7Kohm,5%,1/16W,DA,TP,1005 2007-000143R529R-CHIP4.7Kohm,5%,1/16W,DA,TP,1005 2007-000144R281R-CHIP5.1Kohm,5%,1/16W,DA,TP,1005 2007-000144R310R-CHIP5.1Kohm,5%,1/16W,DA,TP,1005 2007-000145R506R-CHIP6.2Kohm,5%,1/16W,DA,TP,1005 2007-000146R105R-CHIP6.8Kohm,5%,1/16W,DA,TP,1005 2007-000146R128R-CHIP6.8Kohm,5%,1/16W,DA,TP,1005 2007-000147R532R-CHIP8.2Kohm,5%,1/16W,DA,TP,1005 2007-000148R109R-CHIP10Kohm,5%,1/16W,DA,TP,1005 2007-000148R121R-CHIP10Kohm,5%,1/16W,DA,TP,1005 2007-000148R132R-CHIP10Kohm,5%,1/16W,DA,TP,1005 2007-000148R139R-CHIP10Kohm,5%,1/16W,DA,TP,1005 2007-000148R194R-CHIP10Kohm,5%,1/16W,DA,TP,1005 2007-000148R196R-CHIP10Kohm,5%,1/16W,DA,TP,1005 2007-000148R426R-CHIP10Kohm,5%,1/16W,DA,TP,1005 2007-000148R427R-CHIP10Kohm,5%,1/16W,DA,TP,1005 2007-000148R510R-CHIP10Kohm,5%,1/16W,DA,TP,1005 2007-000148R512R-CHIP10Kohm,5%,1/16W,DA,TP,1005 2007-000148R517R-CHIP10Kohm,5%,1/16W,DA,TP,1005 2007-000148R582R-CHIP10Kohm,5%,1/16W,DA,TP,1005 2007-000151R134R-CHIP15Kohm,5%,1/16W,DA,TP,1005 2007-000153R100R-CHIP22Kohm,5%,1/16W,DA,TP,1005 2007-000153R123R-CHIP22Kohm,5%,1/16W,DA,TP,1005 2007-000153R125R-CHIP22Kohm,5%,1/16W,DA,TP,1005 2007-000153R129R-CHIP22Kohm,5%,1/16W,DA,TP,1005 2007-000153R145R-CHIP22Kohm,5%,1/16W,DA,TP,1005 2007-000153R147R-CHIP22Kohm,5%,1/16W,DA,TP,1005 2007-000155R185R-CHIP27Kohm,5%,1/16W,DA,TP,1005 2007-000157R102R-CHIP47Kohm,5%,1/16W,DA,TP,1005 2007-000157R107R-CHIP47Kohm,5%,1/16W,DA,TP,1005 2007-000157R520R-C…

Text truncated - open the document above for the full version.

5.TESTPROCEDURE TUNE-UPPROCEDURE ListofEquipment -DCPowerSupply -TestJig -TestCable -CDMAMobileStationTestSetHP8924C,HP83236A,CMD-80,etc -SpectrumAnalyzer(includeCDMAtestmode)HP8596E ConfigurationofTest SpectrumAnalyzer RFIn HP8924C RFAudioAudio In/OutOutIn ToA-Out TestJig ToA-In DCPowerSupply (+3.75V) Directional Coupler FM A.YoumustchangethephonefromNormalModetoFMTestmode B.Thecommand[01](suspend)isenteredtostarttest. C.Youshouldenterthefollowingkeys. [09XXXX#,07,97XXX] -Ifyouenterthecommand[09],Youcanselectthechannel. -Thecommand[07]meansCarrierOn(CarrierOff:08) -Ifyouenterthecommand[97],Youcancontrolthepoweroutputlevel.Followingunder-barmeansAGC code.Andyoucancontrolthepoweroutputlevelusing[SEND]or[END]key ex)97475 D.ControltheTXPowerOutputLevelusing[SEND]or[END]key. Whenyoupress[OK]keytostoreDatainEEPROM,enternextpowerlevelcontrolstepautomatically LEVELLCDDisplayTXOUTPUTPOWERSTORE 2TXpwr[02]+26dBm+2/-4dBOK 3TXpwr[03]+24dBm+2/-4dBOK 4TXpwr[04]+20dBm+2/-4dBOK 5TXpwr[05]+16dBm+2/-4dBOK 6TXpwr[06]+12dBm+2/-4dBOK 7TXpwr[07]+08dBm+2/-4dBOK ChangetoTestMode A.TochangethephonefromNormalModetotestMode,Youshouldenterthefollowingkeys. "*759#813580" B.Thecommand °∞ 01"(Suspend)isenteredtostarttest. C.TofinishtheTestMode,Youshouldenterthecommand"02". ChannelSelectionandTxPowerOutputlevelControl 1.CDMA A.YoushouldchangethephonefromNormalModetoTestmode B.Thecommand °∞ 01"(Suspend)isenteredtostarttest. C.Youshouldenterthefollowingkeys. "09XXXX#,07,34,73,92" -Ifyouenterthecommand"09",Youcanselectthechannel ex)090363(under-barmeanschannelnumber) -Thecommand"07 °± meansCarrierOn(CarrierOff: °∞ 08 °± ) -Ifyouenterthecommand"71",Youcancontrolthepoweroutputlevel.Followingunder-barmeansAGC code,000to511.AndyoucancontrolthepoweroutputlevelusingVolumeUp/DownKeys. ex)71475 -Ifyouenterthecommand"34",Youcanspreadspectrumto1.23MHzbandwidth. TESTCABLEDESCRIPTIONFORSCH-A105 1.TESTCABLE 2.TESTCABLECONNECTIONS 1RFTESTCONNECTOR 2BNCCONNECTOR(RF) 3RFCABLE 4Dsub25PINCONNECTOR(DATA) 5DATACABLE 6PLUGCONNECTTOSCH-A105 4 6 5 1 2 3 3.Dsub25PINCONNECTORPINDESCRIPTION(TESTCABLE1,BACKSIDE) 4.CONVERSIONTABLEOFFREQUENCYvsCHANNEL °∆°∆°∆°∆°∆°∆°∆°∆°∆°∆°∆°∆ °∆°∆°∆°∆°∆°∆°∆°∆°∆°∆°∆°∆°∆ 151719212325 14 °È 16 °È 18 °È 20 °È 22 °È 24 °È °Ë 12 °Ë 123456789101113 DATADESCRIPTIONDsubCONN.PINNO. Vcc4,5,6 GND13,23,24,25 PWON/OFF7 TXAUDIO10 TXDATA22 RXAUDIO12 RXDATA21 RSSI8 TYPECHANNELCONVERSIONEQUATIONREMARK TX FREQUENCY 1 °¬ N °¬ 799 990 °¬ N °¬ 1023 F=0.03 °ø N+825.00 F=0.03 °ø (N-1023)+825.00 N;CHNUMBER F;FREQUENCY RX FREQUENCY 1 °¬ N °¬ 799 990 °¬ N °¬ 1023 F=0.03 °ø N+870.00 F=0.03 °ø (N-1023)+870.00 FMMODE TESTITEMSTEPPROCEDURE 1.PREPAREa b c d e f Connectthetestequipment SelectFMMode:Choose'AnalogOnly'intheGeneralNAM program,andPress[OK] Enterthetestmode:press[*759#813580] Press[01]:YoumustdoitatfirstinFMtestmode. Ifyouprecessawrongkey,precess[#]keyandthenenter newcommand. Toexitthetestmodeatanytime:press[02] 2.RFpowera b c d e f Setthechannel383:press[090383] Turnthecarrieronandsetthepowerlevel2. :press[07102] MeasuretheRFPowerOutput:+26dBm+2/-4dBm Note1:Inthecaseofusingtheantennacable,mustcompensate forthecableloss. Note2:TopreventfromdamagetheHHP,mustmeasureby calibratedtestequipment. Warning! Adjustmentswithoutcalibratedequipmentcanresultinexcessive heatandwillvoidthewarranty. powerlevelcontrolmodeis[10X] Adjustpowerlevelbyusing[SEND]or[END]key,andstore :press[97] Thenmeasurethepoweroutputforeachlevelbypressing[OK]or [ °Â ]ateverystep. Thenturncarrieroff:press[08] 3.TXFrequencya b c d Setthechannel383:press[090383] Turnthecarrieron:press[07] Measurethetxfrequency:836.49MHz °æ 2.5ppm( °æ 2090Hz) Turnthecarrieroff:press[08] TESTITEMSTEPPROCEDURE 4.VoiceDeviationa b c d e f g h i j k l Setthechannel383:[09383] SendtheRFpower,andsetTXaudiounmute :press[07464514] Turnthecarrieron,andsetthepowerlevel2 Settheaudiogeneratoroutputto1KHz,3.0Vrms. MeasuretheTXvoicedeviationbyusingtheHPFof20Hz andLPFof99KHz.(Spec:2.9KHz °æ 10%) Toadjustthepeakdeviation, Press[63]andusethe[SEND]or[END]key Storethepeakdeviation:press[OK] Settheaudiogeneratoroutputto1KHz,100Vrms Toadjustthecompressoroffdeviation:press[45],and use[SEND]or[END]key.(Spec:2.9KHz °æ 0.2KHz) Storethecompressorondeviation:press[OK] Toadjustthecompressoroffdeviation:press[44],and use[SEND]or[END]key.(Spec:2.9KHz °æ 0.2KHz) Storethecompressorondeviation:press[OK] Turnthecarrieroff,andTXmute:[0813] 5.STDeviationa b c d e f g Setthechannel383:press[090383] Turnthecarrieronandsetthepowerlevel2. SetST:press[16] MeasuretheTXSTdeviationbyusingtheHPFof20Hz andtheLPFof15KHz.(spec:8KHz °æ 10%) Toadjustthedeviation:press[06],anduse[SEND]or[END]key. StorethedeviationcodeinEEPROM:press[OK] TurntheSTandthecarrieroff:press[1708] TESTITEMSTEPPROCEDURE 6.SATDeviationa b c d e f g Setthecahnnel383:[09383] Turnthecarrieron,andsetthepowerlevel2 SettheVoiceStateandSATon:press[46321] MeasuretheTXSATdeviationbyusingtheHPFof20Hz andtheBPFof6KHz.(spec:2KHz °æ 10%) Toadjustthedeviationwithinspecification:press[64],and use[SEND]or[END]key StorethedeviationcodeinEEPROM:press[OK] TurntheSATandthecarrieroff:press[3308] 7.WBDDeviationa b c d e f Setthechannelandcarrieron:[09038307] WBDon:[34] MeasuretheWBDdeviationbyusingtheHPFof20Hzand theLPFof99KHz.(spec:8KHz °æ 10%) ToadjusttheWBDdeviation:press[65],and[SEND]or[END] key. StorethedeviationcodeinEEPROM:press[OK] Turnthecarrieroff:press[08] 8.RXAudio a b c d e f g Settheequipmentasbelow. RFfrequency:881.49MHz InputRFlevel:-80dBm Modulationfrequency:1KHz Frequencydeviation:8KHz Setthechannel383andtheVoiceState: press[09038346] SettheRXaudiounmute:press[12] Setcompandoron:press[44] Adjusttheexpandoronaudiolevel:press[61] Use[SEND]or[END]key. Storetheexpandoronaudiolevel:press[OK] Finishthetestandexittestmode:press[02] CDMAMODE TESTITEMSTEPPROCEDURE 1.PREPAREa b c d e f g h Connectthetestequipment Enterthetestmode:press[*759#813580] Ifyoupressawrongkey,press[#]keyandthenenternew command. Press01toentertothetestmenu Press07toturnthecarrieron Press[09XXXX#]tosetthechannel…

Text truncated - open the document above for the full version.

FM A.Youmustchang ethephonefromNormalMod etoFMTestmod e B.Thecommand[01](suspend )isenteredtostarttest. C.Youshouldenterthefoll owingkeys. [09XXXX#,07,97XXX] -Ifyo uenterthecommand[09],Youcanselectthechann el. -Thecommand[07]meansCarr ierOn(CarrierOff:08) -Ifyo uenterthecommand[97],Youcancon trolthepo werou tpu tlevel.Foll owingunder- barmeansAGC cod e.Andyoucancon trolthepo werou tpu tlevelusing[SEND]or[END]key ex)97475 D.Con troltheTXPowerOutpu tLevelu…

Text truncated - open the document above for the full version.