A4RGBC0HPhone

Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 650 253-0000 main Google.com Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 March 28, 2026 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) FCC ID: A4RGBC0H, A4RG4HCD To whom it may concern, Google LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant certifies that, the device does not have cybersecurity and/or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. The applicant also certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment, and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, ______________________________ Jason Qian RF Compliance Technical Program Manager Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043

GoogleLLC 1600AmphitheatreParkway MountainView,CA94043 650253-0000main Google.com FederalCommunicationsCommission 7435OaklandMillsRoad ColumbiaMD21046 April22,2024 Subject:CFR47§2.911(d)(7)AgentForServiceofProcessAttestationLetter FCCGrantee:A4R FRN:0020499539 Towhomitmayconcern, GoogleLLC(“Google”),asrequiredbysection§2.911(d)(7),designatesitselfastheagentfor serviceofprocessforgranteecodeA4R. Hereby,Googleacknowledgestomaintainanagentfornolessthanoneyearafterthegranteehas terminatedallmarketingandimportationortheconclusionofanyCommission-relatedproceeding involvingtheequipment.GooglealsoacknowledgesitsresponsibilityunderCFR47§2.929(c)to notifytheFCCwhenevertheagentinformationchanges. USAgentInformation: ContactPerson:JohnMcNulty CompanyName:GoogleLLC FCCFRN:0020499539 CompanyAddress:1600AmphitheatreParkway,MountainView,CA94043 Email:[email protected] Sincerelyyours, ______________________________ JohnMcNulty DirectorofFieldSafetyandComplianceEngineeringforHardware Email:[email protected] GoogleLLC 1600AmphitheatreParkway MountainView,CA94043

Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 650 253-0000 main Google.com Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 March 28, 2026 Subject: Request for Confidentiality FCC ID: A4RGBC0H, A4RG4HCD To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 C.F.R. §§ 0.457, 0.459), we request that the Commission withhold the following attachments as confidential documents from public disclosure indefinitely. ● Schematic Diagram ● Block Diagram ● Theory of Operation (Operational and Technical Descriptions) ● Tune Up Procedure In support of this request, we provide the following information: 1. Identification of the specific information for which confidential treatment is sought (§ 0.459(b)(1)): We request that all of the information contained in the above-referenced exhibits to the certification application be withheld from routine public disclosure. 2. Identification of the Commission proceeding in which the information was submitted or a description of the circumstances giving rise to the submission (§ 0.459(b)(2)): The material is being submitted in connection with our certification application for the above-captioned FCC ID. 3. Explanation of the degree to which the information is commercial, or financial or contains a trade secret or is privileged (§ 0.459(b)(3)): The market for the technology that is the subject of the certification application is highly competitive, with numerous companies competing for the business of potential customers. Were competitors to become aware of the facts set forth in the above-referenced exhibits to the application at this time, it could have an adverse impact on our competitive standing and deprive us of the marketplace benefit we otherwise might achieve by virtue of having the product available before other competitors. If any of the information for which confidential treatment is sought was made publicly available, competitors could reasonably determine the scope and status of our activities. 4. Explanation of the degree to which the information concerns a service that is competitive (§ 0.459(b)(4)): The technology that is the subject of the certification application is subject to intense competition from other manufacturers and service providers that are developing competing services and technology. 5. Explanation of how disclosure of the information could result in substantial competitive harm (§ 0.459(b)(5)): As noted above, were our competitors to become aware of the facts set forth in the above-referenced exhibits to the application, it could have an adverse impact on our competitive standing and deprive us of the marketplace benefit we otherwise would achieve by virtue of having the product available before other providers. 6. Identification of any measures taken by the requesting party to prevent unauthorized disclosure (§ 0.459(b)(6)): The information contained in the above-referenced exhibits to the certification application has been strictly controlled by us, with distribution limited to internal use only and for the specific purpose of conducting research, development, and testing of the technology. 7. Identification of whether the information is available to the public and the extent of any previous disclosures of the information to any third parties (§ 0.459(b)(7)): The information that we request be maintained as confidential is not available publicly. The information has been protected and kept confidential by limiting external contacts to privileged and confidential communications. 8. Justification of the period during which the submitting party asserts that material should not be available for public disclosure (§ 0.459(b)(8)): Given the competitive nature of the marketplace, any disclosure that we have developed the technology discussed in the above-referenced exhibits to the certification application would harm our competitive position. The information subject to this request for confidentiality should not be made available for public disclosure at any time. In addition, pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. §2.803 and the importation rules in 47 C.F.R. §2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we also request that the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 180 days after the grant date. ● External Photos ● Internal Photos ● Test Setup Photos ● User Manual It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely yours, ______________________________ Jason Qian RF Compliance Technical Program Manager Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 2

Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 650 253-0000 main Google.com Date: March 28, 2026 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: A4RGBC0H, A4RG4HCD To Whom It May Concern: I, the undersigned, hereby authorize Sporton International Inc. (Sporton) to act on Google LLC’s (Google) behalf in all manners relating to the above-captioned application for equipment authorization, including signing of all documents relating to this matter. Any and all acts carried out by Sporton on Google’s behalf shall have the same effect as acts of Google’s own. I, the undersigned, hereby certify that Google is not subject to a denial of federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 853(a). In authorizing Sporton as Google’s representative, Google recognizes that it is still responsible for: a) complying with the relevant provisions of the certification program; b) making all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) making claims regarding certification only in respect of the scope for which certification has been granted; d) not using the product certification in such a manner as to bring Sporton into disrepute and not making any statement regarding the product certification that Sporton may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinuing the use of all advertising matter that contains any reference thereto and return any certification documents as required by Sporton; f) using the certification only to indicate that the products are certified as being in conformity with specified standards; g) endeavoring to ensure that no certificate or report or any part thereof is used in a misleading manner; h) ensuring that any reference to the product certification in communication media such as documents, brochures, or advertising, complies with Sporton’s requirements; i) keeping a record of all complaints made known to Google relating to the product’s compliance with the requirements of the relevant standard and making these records available to the applicable authorities when requested; j) taking appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; and k) documenting the actions taken. This authorization is valid until further written notice from Google. Sincerely yours, ______________________________ Jason Qian RF Compliance Technical Program Manager Email: [email protected] Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 2

Label Declaration FCC ID: A4RGBC0H FCC §2.935 Electronic labeling of radiofrequency devices (a) Any radiofrequency device equipped with an integrated electronic display screen, or a radiofrequency device without an integrated screen that can only operate in conjunction with a device that has an electronic display screen, may display on the electronic display the FCC Identifier, any warning statements, or other information that the Commission’s rules would otherwise require to be shown on a physical label attached to the device. Information On e-label In Manual FCC ID number Yes No 15.19 Statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Class B Digital Device user manual statement No Yes Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment No Yes Image of the e-label screen is provided below: Model: GBC0H United States of America FCC ID: A4RGBC0H The satellite feature on this device must be turned off at all times while on board an aircraft by turning on airplane mode. (b) Devices displaying their FCC Identifier, warning statements, or other information electronically must make this information readily accessible on the electronic display. Users must be provided with prominent instructions on how to access the information in the operating instructions, inserts in packaging material, or other easily accessible format at the time of purchase. The access instructions may also be provided via the product-related website, if such a web site exists; the packaging material must provide specific instructions on how to locate the website information, and a copy of these instructions must be included in the application for equipment certification. The instruction on how to access the information is in the box in the Safety/Warranty/Regulatory booklet, and in the online version of the Safety/Warranty/Regulatory booklet: “Regulatory information, certification, and compliance marks can be found with the following steps from the Home screen: Settings > About phone > Regulatory labels.” (c) Devices displaying their FCC Identifier, warning statements, or other information electronically must permit access to the information without requiring special codes, accessories or permissions and the access to this information must not require more than three steps from the device setting menu. The number of steps does not include those steps for use of screen locks, passcodes or similar security protection designed to control overall device access. No special accessories or supplemental plug-ins are required to access the information. To access the e-label information, in the device from the Home screen: Select: Settings > About phone > Regulatory labels (d) The electronically displayed FCC Identifier, warning statements, or other information must be displayed electronically in a manner that is clearly legible without the aid of magnification. Yes (e) The necessary label information must be programmed by the responsible party and must be secured in such a manner that third-parties cannot modify it. The e-label information is pre-programmed by the grantee. The user cannot modify the e-label information. (f) Devices displaying their FCC Identifier, warning statements, or other information electronically must also be labeled, either on the device or its packaging, with the FCC Identifier or other information (such as a model number and identification of a webpage that hosts the relevant regulatory information) that permits the devices to be identified at the time of importation, marketing, and sales as complying with the FCC’s equipment authorization requirements. Devices can be labeled with a stick-on label, printing on the packaging, a label on a protective bag, or by similar means. Any removable label shall be of a type intended to survive normal shipping and handling and must only be removed by the customer after purchase. The FCC ID and HAC details are present on the product packaging. FCC §20.19(f) Labeling and disclosure requirements for hearing aid-compatible handsets (1) Package label. For all handset models certified as hearing aid-compatible, handset manufacturers and service providers shall ensure that the handset model has an external printed package label that clearly and legibly provides in plain language the following information: (i) That the handset model is certified as hearing aid-compatible; (ii) Whether or not the handset model meets telecoil or Bluetooth coupling requirements or both requirements and, in the case of Bluetooth coupling requirements, which Bluetooth coupling standard the handset model includes; and (iii) The handset model's actual conversational gain with and without hearing aids, if certified under the 2019 ANSI standard, with the actual conversational gain that is displayed being the lowest rating assigned to the handset model for any covered air interface or frequency band. Yes, the exterior packaging will note that the device is hearing aid compatible and will include the conversational gains with and without aid. Here’s an example: FCC ID: A4RGBC0H Hearing Aid Compatible: T-coil & BT HAP/ASHA Conversational Gain: 13.7 dB w/ aid & 19.0 dB w/o aid DA 23-914

TEL : 886-3-327-3456 Page 1 of 169 FAX : 886-3-328-4978 Issued Date : Apr. 29, 2026 Template version: 240125 FCC SAR TEST REPORT Report No. : FA5N0803-01C FCC SAR TEST REPORT FCC ID : A4RGBC0H Equipment : Phone Model Name : GBC0H Applicant : Google LLC 1600 Amphitheatre Parkway, Mountain View, CA, 94043 USA Standard : FCC 47 CFR Part 2 (2.1093) The product was received on Nov. 25, 2025 and testing was started from Jan. 02, 2026 and completed on Apr. 10, 2026. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample provide by manufacturer and the test data has been evaluated in accordance with the test procedures given in 47 CFR Part 2.1093 and FCC KDB and has been pass the FCC requirement. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. Laboratory, the test report shall not be reproduced except in full. Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page 2 of 169 FAX : 886-3-328-4978 Issued Date : Apr. 29, 2026 Template version: 240125 FCC SAR TEST REPORT Report No. : FA5N0803-01C Table of Contents 1. Statement of Compliance ................................................................................................................................................................... 4 2. Equipment Under Test (EUT) Information ......................................................................................................................................... 5 2.1 General Information .................................................................................................................................................................... 5 2.2 Maximum Tune-up Limit ............................................................................................................................................................. 6 2.3 General LTE SAR Test and Reporting Considerations .............................................................................................................. 25 2.4 General 5G NR SAR Test and Reporting Considerations ......................................................................................................... 28 3. TAS feature for RF Exposure compliance....................................................................................................................................... 31 3.1 SAR Characterization – Power Table ........................................................................................................................................ 32 4. RF Exposure Limits .......................................................................................................................................................................... 36 4.1 Uncontrolled Environment ......................................................................................................................................................... 36 4.2 Controlled Environment ............................................................................................................................................................ 36 4.3 RF Exposure limit for above 6GHz ............................................................................................................................................ 37 5. Guidance Applied ............................................................................................................................................................................. 38 6. Specific Absorption Rate (SAR) ...................................................................................................................................................... 38 6.1 Introduction ............................................................................................................................................................................... 38 6.2 SAR Definition .......................................................................................................................................................................... 38 7. System Description and Setup ........................................................................................................................................................ 39 7.1 Test Site Location ..................................................................................................................................................................... 39 7.2 E-Field Probe ........................................................................................................................................................................... 40 7.3 EUmmWave Probe / E-Field 5G Probe ..................................................................................................................................... 41 7.4 Data Acquisition Electronics (DAE) ........................................................................................................................................... 42 7.5 Phantom ................................................................................................................................................................................... 42 7.6 Device Holder ........................................................................................................................................................................... 43 8. Measurement Procedures ................................................................................................................................................................ 44 8.1 Spatial Peak SAR Evaluation .................................................................................................................................................... 44 8.2 Power Reference Measurement .........................................…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page 94 of 169 FAX : 886-3-328-4978 Issued Date : Apr. 29, 2026 Template version: 240125 FCC SAR TEST REPORT Report No. : FA5N0803-01C 13. RF Exposure position consideration Distance of the Antenna to the EUT surface/edge Antennas Front Back Top Edge Bottom Edge Right Edge Left Edge WWAN Ant 0 ≤ 25mm ≤ 25mm > 25mm ≤ 25mm ≤ 25mm ≤ 25mm WWAN Ant 1 ≤ 25mm ≤ 25mm ≤ 25mm > 25mm ≤ 25mm ≤ 25mm WWAN Ant 2 ≤ 25mm ≤ 25mm > 25mm ≤ 25mm ≤ 25mm ≤ 25mm WWAN Ant 5 ≤ 25mm ≤ 25mm ≤ 25mm > 25mm ≤ 25mm ≤ 25mm WWAN Ant 6 ≤ 25mm ≤ 25mm > 25mm ≤ 25mm ≤ 25mm ≤ 25mm WWAN Ant 7 ≤ 25mm ≤ 25mm > 25mm ≤ 25mm ≤ 25mm ≤ 25mm WLAN/BT Ant 3 ≤ 25mm ≤ 25mm ≤ 25mm > 25mm ≤ 25mm ≤ 25mm WLAN/BT Ant 4 ≤ 25mm ≤ 25mm ≤ 25mm > 25mm ≤ 25mm ≤ 25mm WLAN Ant 3+4 ≤ 25mm ≤ 25mm ≤ 25mm > 25mm ≤ 25mm ≤ 25mm NFC ≤ 25mm ≤ 25mm ≤ 25mm > 25mm ≤ 25mm ≤ 25mm Positions for SAR test Antennas Front Back Top Edge Bottom Edge Right Edge Left Edge WWAN Ant 0 Yes Yes No Yes Yes Yes WWAN Ant 1 Yes Yes Yes No Yes Yes WWAN Ant 2 Yes Yes No Yes Yes Yes WWAN Ant 5 Yes Yes Yes No Yes Yes WWAN Ant 6 Yes Yes No Yes Yes Yes WWAN Ant 6 Yes Yes No Yes Yes Yes WLAN/BT Ant 3 Yes Yes Yes No Yes Yes WLAN/BT Ant 4 Yes Yes Yes No Yes Yes WLAN Ant 3+4 Yes Yes Yes No Yes Yes NFC Yes Yes Yes No Yes Yes General Note: 1. Referring to KDB 941225 D06 v02r01, when the overall device length and width are ≥ 9cm*5cm. RF Exposure must be measured for all sides and surfaces with a transmitting antenna located within 25mm from that surface or edge. 2. The antenna location is illustrated in the Appendix H. TEL : 886-3-327-3456 Page 95 of 169 FAX : 886-3-328-4978 Issued Date : Apr. 29, 2026 Template version: 240125 FCC SAR TEST REPORT Report No. : FA5N0803-01C 14. SAR Test Results General Note: 1. Per KDB 447498 D01v06, the reported SAR is the measured SAR value adjusted for maximum tune-up tolerance. a. Tune-up scaling Factor = tune-up limit power (mW) / EUT RF power (mW), where tune-up limit is the maximum rated power among all production units. b. For SAR testing of WLAN signal with non-100% duty cycle, the measured SAR is scaled-up by the duty cycle scaling factor which is equal to "1/(duty cycle)" c. For WWAN: Reported SAR(W/kg)= Measured SAR(W/kg)*Tune-up Scaling Factor d. For WLAN/Bluetooth: Reported SAR(W/kg)= Measured SAR(W/kg)* Duty Cycle scaling factor * Tune-up scaling factor e. For TDD LTE SAR measurement, the duty cycle 1:1.59 (62.9 %) was used perform testing and considering the theoretical duty cycle of 63.3% for extended cyclic prefix in the uplink, and the theoretical duty cycle of 62.9% for normal cyclic prefix in uplink, a scaling factor of extended cyclic prefix 63.3%/62.9% = 1.006 is applied to scale-up the measured SAR result. The Reported TDD LTE SAR = measured SAR (W/kg)* Tune-up Scaling Factor* scaling factor for extended cyclic prefix. 2. Per KDB 447498 D01v06, for each exposure position, testing of other required channels within the operating mode of a frequency band is not required when the reported 1-g or 10-g SAR for the mid-band or highest output power channel is: ‧ ≤ 0.8 W/kg or 2.0 W/kg, for 1-g or 10-g respectively, when the transmission band is ≤ 100 MHz ‧ ≤ 0.6 W/kg or 1.5 W/kg, for 1-g or 10-g respectively, when the transmission band is between 100 MHz and 200 MHz ‧ ≤ 0.4 W/kg or 1.0 W/kg, for 1-g or 10-g respectively, when the transmission band is ≥ 200 MHz 3. Per KDB 865664 D01v01r04, for each frequency band, repeated SAR measurement is required only when the measured SAR is ≥0.8W/kg. 4. Per KDB 648474 D04v01r03, when the reported SAR for a body-worn accessory measured without a headset connected to the handset is ≤ 1.2 W/kg, SAR testing with a headset connected to the handset is not required. 5. For 5GHz and 6GHz WLAN product specific SAR is necessary too, due to an overall diagonal dimension is > 16cm. 6. Per KDB648474 D04v01r03, for smart phones with a display diagonal dimension＞15.0 cm or an overall diagonal dimension＞16.0 cm, when hotspot mode applies, 10-g product specific SAR is required only for the surfaces and edges with hotspot mode 1-g reported SAR＞1.2 W/kg, however, when power reduction applies to hotspot mode the measured SAR must be scaled to the maximum output power, including tolerance, allowed for phablet modes to compare with the 1.2 W/kg SAR test reduction threshold, for this device the FR1 n30/41/48 is required perform product specific condition and the results include in section 14.4. GSM Note: 1. Per KDB 941225 D01v03r01, for SAR test reduction for GSM / GPRS / EDGE modes is determined by the source-based time-averaged output power including tune-up tolerance. The mode with highest specified time-averaged output power should be tested for SAR compliance in the applicable exposure conditions. For modes with the same specified maximum output power and tolerance, the higher number time-slot configuration should be tested. Therefore, the GPRS (4Tx slots) for GSM850/GSM1900 is considered as the primary mode. 2. Other configurations of GSM / GPRS / EDGE are considered as secondary modes. The 3G SAR test reduction procedure is applied, when the maximum output power and tune-up tolerance specified for production units in a secondary mode is ≤ ¼ dB higher than the primary mode, SAR measurement is not required for the secondary mode. UMTS Note: 1. Per KDB 941225 D01v03r01, for SAR testing is measured using a 12.2 kbps RMC with TPC bits configured to all “1’s”. 2. Per KDB 941225 D01v03r01, RMC 12.2kbps setting is used to evaluate SAR. The maximum output power and tune-up tolerance specified for production units in HSDPA / HSUPA is ≤ ¼ dB higher than RMC 12.2Kbps or when the highest reported SAR of the RMC12.2Kbps is scaled by the ratio of specified maximum output power and tune-up tolerance of HSDPA / HSUPA to RMC12.2Kbps and the adjusted SAR is ≤ 1.2 W/kg, SAR measurement is not required for HSDPA / HSUPA, and according to the following RF output power, the output power results of the secondary modes (HSDPA /…

Text truncated - open the document above for the full version.

TEL : 886-3-327-0868 Page Number : 1 of 76 FAX : 886-3-327-0855 Issue Date : Apr. 28, 2026 Report Template No.: BU5-FR15F Version 1.0 Report Version : 02 FCC RADIO TEST REPORT Report No. : FR5N0803-01O FCC RADIO TEST REPORT FCC ID : A4RGBC0H Equipment : Phone Model Name : GBC0H Applicant : Google LLC 1600 Amphitheatre Parkway, Mountain View, CA, 94043 USA Standard : 47 CFR FCC Part 15.519 The product was received on Dec. 09, 2025, and testing was performed from Dec. 12, 2025 to Mar. 09, 2026. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL : 886-3-327-0868 Page Number : 2 of 76 FAX : 886-3-327-0855 Issue Date : Apr. 28, 2026 Report Template No.: BU5-FR15F Version 1.0 Report Version : 02 FCC RADIO TEST REPORT Report No. : FR5N0803-01O Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ............................................................................................................................. 5 1.1 Product Feature of Equipment Under Test ............................................................................................ 5 1.2 Modification of EUT ................................................................................................................................ 5 1.3 Type of EUT ..…

Text truncated - open the document above for the full version.