A5JA10529Baby Audio Monitor

Download the Tend Baby app to your iOS or Android device. Find the perfect spot for your new Kodak Baby Monitoring System & plug it into an outlet using the enclosed power adapter. Press the power button on the right side of the Base Unit to turn it on. You’ll hear “power on”. Wait up to two minutes for the camera to go into setup mode. When ready, the LED lights on the right side of the Camera will blink and alternate between orange and green (pull the camera towards you to see the LED lights). quick installation guide Go to the Wi-Fi settings on your mobile device and connect to the Wi-Fi network labeled CFH-BVA10XXXX (last 4 digits of the MAC ID). Launch the Tend Baby app to allow the camera and your mobile device to sync. Follow on-screen instructions to complete Camera and App setup. The Base Unit and the Parent Unit come pre-paired for your convenience. Simply press the power button on the right side of the Base Unit to turn it on, then press the circular power button located in the middle of the handheld Parent Unit. You’ll hear “power on”. 05 06 07 For detailed instructions, visit kodak.tendinsights.com/setup WE’RE HERE TO HELP Learn more about the KODAK Baby Monitoring System and Tend Baby app at kodak.tendinsights.com Apple, iPad, and iPhone are trademarks of Apple, Inc. Android is the trademark of Google Inc. The Kodak trademark and trade dress are used under license from Kodak © 2015 Tend Insights, Inc. All rights reserved. Made in China Baby Monitoring System CFH-BVA10 BASE UNIT WITH 180 WI-FI VIDEO CAMERA PARENT UNIT (BATTERIES INCLUDED) BASE UNIT COVER POWER ADAPTER FOR PARENT UNIT POWER ADAPTER FOR BASE UNIT QUICK INSTALLATION GUIDE PACKAGE CONTENTS

Declaration on model difference 产品差异声明 Page 1 of 1 page We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; the only difference is color. 我们在下面签名并据此确认:以下产品型号之间的差异仅为颜色不同，其它设计完全相同。 „ FCC ID: A5JA10529 Production name 产品名称 Trade name 商标 Model no. 型号 Baby Audio Monitor Kodak CFH-BA10(Parent) / CFH-BA12(Parent) Confirmed by Quadrant Technology(Shenzhen)Co., LTD Authorized Signature: 授权人签字 Date: 2015-12-14 日期

RF_160, Issue 03 Declaration of Authorization We Name: QUADRANT TECHNOLOGY (SHENZHEN) CO., LTD Address: 3rd floor, 7th building Hongfa JiaTeLi Hi-Tech park of shixin village, shiyan Town, City: Shenzhen City, Guangdong Province, Country: China Declare that: Name Representative of agent: Lisa Wang (1) Agent Company name: EMTEK (SHENZHEN) CO., LTD. Address: Bldg 69, Majialong Industry Zone, Nanshan District, City: Shenzhen Country China is authorized to apply for Certification of the following product(s): Product description: Baby Audio Monitor Type designation: CFH-BA10(Parent) / CFH-BA12(Parent) Trademark: Kodak on our behalf. Date: 2015-12-09 City: Shenzhen Name: Youyi Function: Huang Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: QUADRANT TECHNOLOGY (SHENZHEN) CO., LTD Address : 3rd floor,7TH building, Hongfa JiaTeLi Hi-Tech park of ShiXin Village, Shiyan Town, City: Shenzhen Country: China To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: A5JA10529 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: December 09, 2015 Name and signature of applicant: Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Exterrnal Ph hotos

Label Location

Internal Photos Antenna Antenna Antenna

TRF No：FCC 15.249/A Page 1 of 44 Report No: ES151111024E Ver.1.0 Access to the World ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC CFR47 PART 15 Section 15.249 REQUIREMENT OF Product Name: Baby Audio Monitor MODEL No.: CFH-BA10(Parent) / CFH-BA12(Parent) Trademark: Kodak FCC ID: A5JA10529 REPORT NO: ES151111024E ISSUE DATE: December 05, 2015 Prepared for Quadrant Technology(Shenzhen)Co., LTD 3rd floor,7TH building, Hongfa JiaTeLi Hi-Tech park of ShiXin Village, Shiyan Town, Shenzhen City, Guangdong province, China Prepared by EMTEK (Shenzhen) Co., Ltd. Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 TRF No：FCC 15.249/A Page 2 of 44 Report No: ES151111024E Ver.1.0 Access to the World VERIFICATION OF COMPLIANCE Applicant: Quadrant Technology（Shenzhen）Co., LTD 3rd floor,7TH building, Hongfa JiaTeLi Hi-Tech park of ShiXin Village, Shiyan Town, Shenzhen City, Guangdong province, China Manufacturer: Quadrant Technology（Shenzhen）Co., LTD 3rd floor,7TH building, Hongfa JiaTeLi Hi-Tech park of ShiXin Village, Shiyan Town, Shenzhen City, Guangdong province, China Product Description: Baby Audio Monitor Model Number: CFH-BA10(Parent) / CFH-BA12(Parent) These models are identical in circuitry and electrical, mechanical and physical construction; the only difference is the color. for trading purpose. We prepare CFH-BA10(Parent) for test, and the worst result recorded in the report. Date of Test: November 12, 2015 to December 05, 2015 We hereby certify that: The above equipment was tested by EMTEK (Shenzhen) Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2013) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.249. The test results of this report relate only to the tested sample identified in this report. Date of Test : November 12, 2015 to December 05, 2015 Prepared by : Yaping Shen/Editor Reviewer : Joe Xia/Supervisor Approve & Authorized Signer : Lisa Wang/Manager TRF No：FCC 15.249/A Page 3 of 44 Report No: ES151111024E Ver.1.0 Access to the World Table of Contents 1. GENERAL INFORMATION .................................................................................................................... 4 1.1. PRODUCT DESCRIPTION ..................................................................................................................... 4 1.2. RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................ 5 1.3. TEST METHODOLOGY .......................................................................................................................... 5 1.4. SPECIAL ACCESSORIES ...................................................................................................................... 5 1.5. EQUIPMENT MODIFICATIONS ............................................................................................................. 5 1.6. MEASUREMENT UNCERTAINTY .......................................................................................................... 6 1.7. TEST FACILITY ....................................................................................................................................... 6 2. SYSTEM TEST CONFIGURATION ........................................................................................................ 7 2.1. EUT CONFIGURATION .......................................................................................................................... 7 2.2. EUT EXERCISE ...................................................................................................................................... 7 2.3. TEST PROCEDURE ............................................................................................................................... 7 2.4. DESCRIPTION OF TEST MODES ......................................................................................................... 7 2.5. SUPPORT EQUIPMENT ......................................................................................................................... 7 3. SUMMARY OF TEST RESULTS ............................................................................................................ 8 4. RADIATED EMISSION TEST ................................................................................................................. 9 4.1. MEASUREMENT PROCEDURE ............................................................................................................ 9 4.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................ 10 5.3 MEASUREMENT EQUIPMENT USED: ................................................................................................ 11 5.4 RADIATED EMISSION LIMIT ............................................................................................................... 11 5.5 MEASUREMENT RESULT ................................................................................................................... 13 5. PERIODIC OPERATION ....................................................................................................................... 25 6. BANDWIDTH TEST .............................................................................................................................. 26 6.1. MEASUREMENT PROCEDURE .......................................................................................................... 26 6.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................ 26 6.3. MEASUREMENT EQUIPMENT USED: ................................................................................................ 26 6…

Text truncated - open the document above for the full version.

Setup photos Conducted Emission Radiated Emission