A5M-GK470Rwegear BLITZ B79 Wireless Pastel Keyboard Dongle

Lenovo (Beijing) Limited Date: 5/25/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: A5M-GK470R Grantee FRN: 0032905564 1. Lenovo (Beijing) Limited certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Lenovo (Beijing) Limited certifies that, the device does not have cybersecurity and / or anti- virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. 3. Lenovo (Beijing) Limited (“the applicant”) certifies that the RF device is not a router “produced in a foreign country”. 4. Lenovo (Beijing) Limited certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Yang Liu Job Title: Product Manager Company Name: Lenovo (Beijing) Limited

Grantee FRN: 0032905564 FCC ID:A5M-GK470R

Lenovo (Beijing) Limited DATE: 05/25/2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch， Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Lenovo (Beijing) Limited， 201-H2-6, Floor2, Building 2, No. 6 Shangdi West Road, Haidian District, Beijing,China (Applicant Name and address) Sincerely yours, Name: Yang Liu Job Title: Compliance Engineer Company Name: Lenovo (Beijing) Limited

Lenovo (Beijing) Limited 05/25/2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely yours, Name: Yang Liu Job Title: Compliance Engineer Company Name: Lenovo (Beijing) Limited

Lenovo (Beijing) Limited DATE：05/25/2026 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: A5M-GK470R Product Name: wegear BLITZ B79 Wireless Pastel Keyboard Dongle Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Sincerely yours, Name: Yang Liu Job Title: Compliance Engineer Company Name: Lenovo (Beijing) Limited

External Photographs Page 2 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 3 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 4 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Page 5 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch.

Label and label location: Note: This label will be permanently engraved on this device. Label and label location

Internal Photographs Page 2 of 2 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. PCB Antenna

FCC ID: A5M-GK470R According to 447498 D04 Interim General RF Exposure Guidance v01, 2.1.4 MPE-Based Exemption An alternative to the SAR-based exemption is provided in § 1.1307(b)(3)(i)(C), for a much wider frequency range, from 300 kHz to 100 GHz, applicable for separation distances greater or equal to λ/2π, where λ is the free-space operating wavelength in meters. The MPE-based test exemption condition is in terms of ERP, defined as the product of the maximum antenna gain and the delivered maximum time-averaged power.10 For this case, a RF source is an RF exempt device if its ERP (watts) is no more than a frequency-dependent value, as detailed tabular form in Appendix B. These limits have been derived based on the basic specifications on Maximum Permissible Exposure (MPE) considered for the FCC rules in § 1.1310(e)(1). B.4 SAR-based Exemption SAR-based thresholds are derived based on frequency, power, and separation distance of the RF source. The formula defines the thresholds in general for either available maximum time- averaged power or maximum time-averaged ERP, whichever is greater. If the ERP of a device is not easily determined, such as for a portable device with a small form factor, the applicant may use the available maximum time-averaged power exclusively if the device antenna or radiating structure does not exceed an electrical length of λ/4. As for devices with antennas of length greater than λ/4 where the gain is not well defined, but always less than that of a half-wave dipole (length λ/2), the available maximum time-averaged power generated by the device may be used in place of the maximum time-averaged ERP, where that value is not known. The separation distance is the smallest distance from any part of the antenna or radiating structure for all persons, during operation at the applicable ERP. In the case of mobile or portable devices, the separation distance is from the outer housing of the device where it is closest to the antenna. The SAR-based exemption formula of § 1.1307(b)(3)(i)(B), repeated here as Formula (B.2), applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power or effective radiated power (ERP), whichever is greater, of less than or equal to the threshold Pth (mW). This method shall only be used at separation distances from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by Formula (B.2). and f is in GHz, d is the separation distance (cm), and ERP 20cm is per Formula (B.1). The example values shown in Table B.2 are for illustration only. 1. SAR test exclusion threshold for 2.402GHz~2.480GHz is 3 mW. Max Tune-up Power [dBm] Max Tune-up Power [mW] Antenna Gain [dBi] EIRP [dBm] ERP [dBm] ERP [mW] Limit [mW] Conclusion -10.00 0.10 -1.28 -11.28 -13.43 0.05 3.00 No SAR is required. - When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2. Conclusion: No SAR is required.

GK470-接收器项目测试报告 GK470 - Receiver Project Test Report Antenna Test Report V1.0 @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd F：吕杰（Jie Lv） 电话（Mobile phone）：13530413724 日期（Date）：2026.05.12 地址（Iocation）：深圳市宝安区石岩街道宝源社区奋达科技园二期2号楼 306（Room 306, Building 2, Phase II, Fenda Technology Park, Baoyuan Community, Shiyan Street, Bao'an District, Shenzhen City） 添加标题文字 单击此处输入描述文字内容，请尽量内容言简意赅，单击此处输入描述文字 内容请尽量内容言简意赅。 Version:Date: Summary of content： V1.02026.05.12天线测试报告（Antenna Test Report） 历史版本（Revision History） @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd 添加标题文字 目录（Catalogue） @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd 01 02 03 04 05 06 项目概况（Project Overview） 测试环境（Test Environment） 天线图片和位置（Antenna picture and position） 天线环境处理（Antenna environment processing） 无源测试（Passive test ） 有源测试（Active test） 07 建议和总结：（Recommendations and Summary：） 添加标题文字 单击此处输入描述文字内容，请尽量内容言简意赅，单击此处输入描述文字 内容请尽量内容言简意赅。 项目概况（Project Overview） @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd 客户名称 Customer Name 项目名 Project Name 天线数目 Antenna Number 天线类型 Antenna Type 川东 GK470-接收器1板载天线（onboard antenna） 天线频段 Frequency Bands WIFI / BT✔ 2400-2500MHz GNSS / NB / 2G / 3G/ 4G/ 5G / 测试标准（Testing standard）： @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd NameParameterMethodStandard no. Antenna performance Radiation efficiency IEEE Standard Test Procedures for Antennas ANSIIEEE Std149- 2021 添加标题文字 单击此处输入描述文字内容，请尽量内容言简意赅，单击此处输入描述文字 内容请尽量内容言简意赅。 测试环境（Test Environment）： @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd Test Equipment Agilent E5071B 300 kHz - 8.5 GHz Test SystemSY-24M SISO/MIMO, 400 - 8500MHz EquipmentManufacturerModel No.Serial No.Last Cal.Due Date Network Analyzer AgilentE5071B——2025.11.132026.11.12 ChamberSunyieldSY-24S—————— 测试环境（Test Environment）： @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd +Z +Y +X @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd 天线图片和位置（Antenna picture and position）： ANT 无源测试：驻波比（Passive test: VSWR） @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd 无源测试：效率和增益（Passive test: Efficiency&Gain） @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd frequency 频率 (MHz) gain 增益 (dBi) efficiency 效率 (dB) efficiency 效率 (%) 2400.00-1.50-5.2329.97 2410.00-1.28-5.1930.28 2420.00-1.57-5.2929.57 2430.00-2.14-5.3928.87 2440.00-1.94-5.4128.80 2450.00-2.03-5.6527.22 2460.00-1.89-5.6627.15 2470.00-1.60-5.7426.64 2480.00-1.98-6.2023.99 2490.00-2.47-6.6721.54 2500.00-2.66-6.7821.00 方向图（Directional diagram） @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd 2400MHz 2450MHz 2500MHz 匹配电路（Matching circuit） @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd E1E2E3 NANANA 匹配参数使用原始状态，未进行修改。 （The matching parameters are in their original state and have not been modified.） 建议和总结：（Recommendations and Summary：）： @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd 如上为GK470-接收器项目测试报告，如上请客户评估，谢谢！ （The above is the test report for the GK470-receiver project. Please have the customer review it. Thank you!） @深圳市大泽无线技术有限公司 Shenzhen Daze Wireless Technology Co., Ltd 谢谢 THANKS

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC 47 CFR PART 15 SUBPART C ISED RSS-247 Issue 4 TEST REPORT For wegear BLITZ B79 Wireless Pastel Keyboard Dongle MODEL NUMBER: GK470R REPORT NUMBER: 4792226758-2-RF-1 ISSUE DATE: June 8, 2026 FCC ID: A5M-GK470R IC: 5903G-GK470R Prepared for FCC: Lenovo (Beijing) Limited IC: LENOVO CHINA FCC Address: 201-H2-6, Floor 2, Building 2, No.6 Shangdi West Road,Haidian District, Beijing, China IC Address: No.6 Chuang Ye Road, Shangdi Information Industry Haidan District, Beijing 100085 China Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4792226758-2-RF-1 Page 2 of 76 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 June 8, 2026 Initial Issue REPORT NO.: 4792226758-2-RF-1 Page 3 of 76 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC 15.203 RSS-GEN Clause 6.8 Pass AC Power Line Conducted Emission ANSI C63.10-2020 Clause 6.2 FCC Part 15.207 Pass Conducted Output Power ANSI C63.10-2020 Clause 7.8.5 FCC 15.247 (b) (1) RSS-247 Clause 6.2.3.1 Pass 20 dB Bandwidth and 99% Occupied Bandwidth ANSI C63.10-2020 Clause 6.9.2 & 6.9.3 FCC 15.247 (a) (1) RSS-247 Clause 6.2.3.1 (a) RSS-Gen Clause 6.7 Pass Carrier Hopping Channel Separation ANSI C63.10-2020 Clause 7.8.2 FCC 15.247 (a) (1) RSS-247 Clause 6.2.3.1 (a) Pass Number of Hopping Frequency ANSI C63.10-2020 Clause 7.8.3 15.247 (a) (1) III RSS-247 Clause 6.2.3.1 (b) Pass Time of Occupancy (Dwell Time) ANSI C63.10-2020 Clause 7.8.4 15.247 (a) (1) III RSS-247 Clause 6.2.3.1 (b) Pass Conducted Bandedge and Spurious Emission ANSI C63.10-2020 Clause 6.10.4 & Clause 7.8.7 FCC 15.247 (d) RSS-247 Clause 6.6 Pass Radiated Band edge and Spurious Emission ANSI C63.10-2020 Clause 6.4 & 6.5 & 6.6 & 7.8.8 FCC 15.247 (d) FCC 15.209 FCC 15.205 RSS-247 Clause 6.6 RSS-GEN Clause 8.9 RSS-GEN Clause 8.10 Pass Duty Cycle ANSI C63.10-2020, Clause 11.6 None; for reporting purposes only. Pass Note: 1. For FCC, ANSI C63.10:2020 + Cor.1:2023 is also considered for the corresponding test item which is needed. 2. For ISED, this report is also performed according to ANSI C63.10-2020 + Cor.1-2023 + C63.10a-2024 + Errata to C63.10a-2024 standards. *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to <FCC 47 CFR PART 15 SUBPART C ISED RSS-247 Issue 4> when <Simple Acceptance> decision rule is applied. Decision rule for statement of conformity: The measurement uncertainty is not taken into account for statement of conformity. REPORT NO.: 4792226758-2-RF-1 Page 4 of 76 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. CONTENTS 1. ATTESTATION OF TEST RESULTS ...................................................................................... 6 2. TEST METHODOLOGY .......................................................................................................... 7 3. FACILITIES AND ACCREDITATION ...................................................................................... 7 4. CALIBRATION AND UNCERTAINTY ..................................................................................... 8 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................ 8 4.2. MEASUREMENT UNCERTAINTY ............................................................................. 8 5. EQUIPMENT UNDER TEST .................................................................................................... 9 5.1. DESCRIPTION OF EUT ............................................................................................. 9 5.2. CHANNEL LIST .......................................................................................................... 9 5.3. MAXIMUM POWER .................................................................................................... 9 5.4. TEST CHANNEL CONFIGURATION ....................................................................... 10 5.5. THE WORSE CASE POWER SETTING PARAMETER .......................................... 10 5.6. DESCRIPTION OF AVAILABLE ANTENNAS .......................................................... 10 5.7. SUPPORT UNITS FOR SYSTEM TEST .................................................................. 11 6. MEASURING EQUIPMENT AND SOFTWARE USED ......................................................... 12 7. ANTENNA PORT TEST RESULTS ...................................................................................... 15 7.1. CONDUCTED OUTPUT POWER ............................................................................ 15 7.2. 20 DB BANDWIDTH AND 99% OCCUPIED BANDWIDTH ..................................... 16 7.3. CARRIER HOPPING CHANNEL SEPARATION ...................…

Text truncated - open the document above for the full version.

Appendix II Setup Photographs RADIATED RF MEASUREMENT SETUP (ABOVE 1 GHz) MEASUREMENT POSITION MEASUREMENT POSITION (X axis) MEASUREMENT POSITION (Y axis) MEASUREMENT POSITION (Z axis) RADIATED RF MEASUREMENT SETUP (30MHz~1GHz) RADIATED RF MEASUREMENT SETUP (Below 30MHz) AC POWER LINE DONDUCTED EMISSION SETUP CONDUCTION MEASUREMENT SETUP