A5MS123ThinkPad Stack Bluetooth Speaker

THINKPAD STACK PROFESSIONAL KIT User Guide 1 Introduction ThinkPad ® Stack Professional Kit (hereafter called the stack kit) includes the following four devices:  ThinkPad Stack Bluetooth Speaker (hereafter called speaker)  ThinkPad Stack Wireless Router (hereafter called router)  ThinkPad Stack 1TB USB3.0 Hard Drive (hereafter called hard disk drive)  ThinkPad Stack 10000mAh Power Bank (hereafter called power bank) The four devices can be stacked together (in any order and combination) through Pogo pins or Pogo pads, which provide fast power and data transfer. If any one of the stacked devices is supplied with power, the power can be transferred to each stacked devices. The speaker supports the following functions:  Up to six hours of music playback  Built-in hands-free phone function The router supports the following functions:  Wireless access in the 2.4-GHz band or the 5-GHz band  Internet access through an RJ-45 network cable  Internet access through an external 3G or 4G network card  Remote access to the hard disk drive if it is stacked to the router  Remote access to a USB storage device if it is connected to the router The hard disk drive supports the following functions:  High-speed access through the USB 3.0 cable  Remote access through the router when they are stacked together 2 Note: Use the ThinkPad Stack Assist app for remote access and control. For more information, go to: http://www.lenovo.com/stack The power bank enables you to do the following: Charge the speaker and supply power to the router by Pogo pins or Pogo pads. Charge two mobile phones by Universal Serial Bus (USB) 2.0 connectors at the same time . Safety information  Keep magnetically sensitive items, such as electronic devices and storage media, more than 10 cm or four inches away from the kit. The strong magnetic fields generated by the magnets contained in the kit might damage magnetically sensitive items.  Do not attempt to replace the internal rechargeable lithium-Ion batteries. Contact Lenovo Support for factory replacement if necessary.  Do not let rechargeable lithium-Ion batteries completely discharge and do not store these batteries in a discharged state. 3 Parts and locations ThinkPad Stack Bluetooth Speaker Pogo pins Speaker icon indicator Microphone-mute button with LED Volume button Play/Pause button Power button with LED ThinkPad logo LED Pogo pad Micro USB 2.0 connector (for USB charging only) Audio-in connector 4 ThinkPad Stack Wireless Router Pogo pins Wireless status LED Power button ThinkPad logo LED USB 2.0 connector Pogo pads Micro USB 2.0 connector (for USB charging only) Ethernet connector Emergency-reset hole ThinkPad Stack 1TB USB3.0 Hard Drive Pogo pins Activity LED ThinkPad logo LED 5 Micro USB 3.0 connector Pogo pads ThinkPad Stack 10000mAh Power Bank Pogo pins Battery icon indicator Battery status indicators Battery status button ThinkPad logo indicator Pogo pads USB 2.0 connector Micro USB 2.0 connector 6 Using the kit Using the speaker Before using the speaker, pair it with a mobile phone, computer, or other device. To pair the speaker, do the following: 1. Ensure that the speaker is powered on. 2. Press and hold the power button for about three seconds. The speaker beeps for two times and the speaker icon indicator starts flashing. 3. Enable the Bluetooth function on the pairing device, and pair with “ThinkPad Stack Bluetooth Speaker.” The pairing process begins. 4. After the speaker beeps again for two times and the speaker icon indicator stops flashing, the speaker has been successfully paired with the pairing device. After the speaker is paired with a device, it is ready for your use. You can take the following operations: Turn on the speaker Press the power button until the green light-emitting diode (LED) in the center of the power button and the speaker icon indicator are solid on. Turn off the speaker Press the power button until the power button LED and the speaker icon indicator are off. Re-pair after a disconnection Press the power button. Turn up the volume Press the volume-up (+) button. 7 Tu r n d ow n t h e vo l u m e Press the volume-down (-) button. Answer an incoming call Press the play/pause button. End a call Press the play/pause button. Mute or unmute Press the microphone-mute button. Pause or resume music play Press the play/pause button. Using the router Connect the router to power There are three methods to connect the router to power:  Connect the router to an electrical outlet.  Stack the hard disk drive to the router and connect the hard disk drive to an electrical outlet.  If the power bank contains sufficient power, stack the router to the power bank. 8 Turn on the router Press the power button for one second until its green LED flashes. Turn off the router Press and hold the power button for two seconds until its LED is off. Connect the router to network There are two methods to connect the router to network:  Turn on the router. Then connect an RJ-45 network cable to the Ethernet connector on the router.  Turn on the router. Then connect an external 3G or 4G network card to the USB 2.0 connector on the router. After the network connection is established, the power button LED stays on. Reset the router to default settings 1. Turn on the router. 2. Insert a needle or a straightened paper clip into the emergency-reset hole to press and hold the reset button for five seconds. 3. Release the reset button. The power button LED flashes. 4. Wait until the power button LED stays on. The router is successfully reset to default settings. 9 Using the hard disk drive You can use the hard disk drive through either direct access or remote access. Direct access Connect one end of the USB 3.0 cable to the micro USB 3.0 connector on the hard disk drive and the other end to an available USB connector on your computer. A USB 3.0 connector is recommended for maximum data transfer speed. Remote access 1. Stack the hard disk drive to the router and…

Text truncated - open the document above for the full version.

LINEAR X X.X mm INCH MODEL DESIGNER MANAGER X.XX DO NOT SCALE DRAWIN G VARIATION THIS DRAWING AND SPECIFICATIONS , HEREIN , ARE THE PROPERTY OF INVENTEC CORPORATION AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN WHOLE OR IN PART AS THE BASIS FOR THE MANUFACTURE OR SALE OF ITEMS WITHOUT WRITTEN PERMISSION, COPYRIGHT 2014 INVENTEC CORPORATION . PART NOREV LEGEND REVISION HISTORY DESIGNER CHANGE NO. DOCREV DATE dd/mm/ yyyy A B THIRD AHGLE PROJECTION NUMBER TITLE FILE NAME DOCUMENT NUMBER SHEET: 1 OF 1 SCALE: 1:1 CODE UNIT: mm SIZE CORPORATION REV A B VER C 2 2 1 1 As shown 6060BXXXXXX 6060-Bxxxxx-0-AI AGENCY LABEL for Bluetooth Speaker Poker Lucas Chen Jane Lee A01 D:15 M:04 Y:15 D:15 M:04 Y:15 poker-l-agency-6060Bxxxxxxx - - - - - - - - INITAL A 02/07/2014 Simon Yeh A PS 0 A 材料Dimension Label 長寬± 0.2mm Label 面材加膠材± 0.02mm 公差 Temperatur eHumidi tyTi meTes t Crite ria 70°CN/ A168hrs 50°C90%168hrs -20°CN/ A168hrs Pass – There is no peeling, shrinkage or bonding fai lures an d the adhesi ve qual ities are not diminish ed by any of the test ing. Fai l – Th ere is peeling, shrinkage or bonding fai lures. For the Serial Nu mber lab el/protective film, an y cloudiness on the film or other defect that preve nts read ing the label information . 勾選 Paste Lo ca tion Glue Type Paste method Peel off meth odTes t Cr ite riaRemark 1. 不脫落 2. 不翹起 3. 氣泡在 5*5cm 或以下面積範圍內 ，不超過兩個 <5mm 直徑 一般膠 食指推平 No 同上 任一角以 90 °C 1. 不脫落 ( 慢慢撕下 )2. 不可殘膠 ( 輕微可用 3M 擦拭布擦拭後無殘膠 ) 3. 氣泡在 5*5cm 或以下面積範圍內 不超過兩個 <5mm 直徑 4. 如呈浮貼狀需可再貼回則為接受 5. 呈捲、曲、翹 狀則不予接受 Carton 一般膠 No La bel Cr iter ia 食指推平 環測結束需靜置 12hr Palm Rest R 膠 食指推平 測試規範 V NOTES: (1) MARK DIMENSION IS THE KEY DIMENSION FOR REFERENCE. (2) PART TO BE PACKAGED TO PREVENT DAMAGED IN SHIPPING AND HANDLING. (3) OTHERS: ACCORDING TO IQC INSPECTION STANDARD OF INVENTEC (IF NOT SPECIFIED). (4) MATE RIAL: A. 50μ polyester label 336-J1E160, WorldMark B. ADHESIVE: N/A C. THICKNESS: 0.085 mm (+ ) D. RAW MATERIAL COLOR: White (5) INK COLOR: Dark Gray/PMS 7544 C (6) Thermal Transfer Ribbon: DPG6000, WorldMark (6) HSF PROPERTY: comply iSupplier system HSF property attribute up-to-date value. Manufactured for Lenovo Made in China/中国制造 Type Approved Safety Regular Production Surveillance www.tuv.com ID 2000000000 Rev: XXS/N:8SSD20A02121K4A00000 319 005-100956 PMS 7544 C Dark Gray(CIELAB ΔL: 28.75 Δa: +0.04 Δb: +0.47) 5.0 7.2 MODEL(型号): S123 IC: 5903G-S123 ASM PN: SSH0H34196 FRU PN: 03X6907 联想(北京)有限公司 ThinkPad Stack Bluetooth Speaker / ThinkPad Stack 蓝牙音箱 Rating(额定): 5.2V 2.0A FCC ID: A5MS123 CAN ICES-3 (B)/NMB-3(B) CMIIT ID: XXXXYYZZZ Lenovo,Einsteinova 21, 851 01 Bratislava, Slovakia 72.0 mm 18.0 mm R 1.0 mm 5.0
L abel L oca ti on

Produkte Products Appendix B 17045688 002 Page 1 of 2 Appendix B Test Results of RF Exposure APPENDIX B.1: RF EXPOSURE COMPLIANCE .................................................................................. 2 Produkte Products Appendix B 17045688 002 Page 2 of 2 Appendix B.1: RF Exposure Compliance Radio Frequency Exposure Compliance RESULT: Passed Test standard : FCC 1.1310 RSS-102 Issue 5 This device is mobile device, and the applicant declares that the minimum separation distance is greater than 20cm. Therefore MPE measurement or computational modeling should be used to determine compliance. MPE Calculation According to the formula π 2 4 * R GPout Pd= Where Pd = power density in mW/cm 2 or W/m2 Pout = output power to antenna in mW or W G = Antenna gain in numeric π = 3.14159 R = Distance between observation point and the center of radiator in cm or m In here Pout = 6.24dBm = 4.21mW G = -0.13dBi = 0.97 (numeric) R = 20cm For Bluetooth operation: 2 22 /00081.0 14159.3*20*4 97.0*21.4 4 * cmmW R GPout Pd=== π < 1mW/cm 2 for FCC limit 2 22 /0081.0 14159.3*2.0*4 97.0*00421.0 4 * mW R GPout Pd=== π < 5.4W/m 2 for IC limit The summed maximum permissible exposure (MPE) level is 0.00081mW/cm 2 and 0.0081W/m 2 . It is less than MPE limit 1mW/cm 2 for FCC and 5.4W/m 2 for IC, therefore the device compliance with MPE limit.

Produkte Products Prüfbericht - Nr.: Test Report No. 17045688 002 Seite 2 von 35 Page 2 of 35 TEST SUMMARY 5.1.1 ANTENNA REQUIREMENT RESULT: Passed 5.1.2 PEAK OUTPUT POWER RESULT: Passed 5.1.3 6DB BANDWIDTH AND 99% BANDWIDTH RESULT: Passed 5.1.4 CONDUCTED SPURIOUS EMISSIONS MEASURED IN 100 KHZ BANDWIDTH RESULT: Passed 5.1.5 P OWER SPECTRAL DENSITY RESULT: Passed 5.1.6 SPURIOUS EMISSIONS RESULT: Passed 5.1.7 RADIATED EMISSIONS RESULT: Passed 5.1.8 CONDUCTED EMISSIONS RESULT: Passed Produkte Products Prüfbericht - Nr.: Test Report No. 17045688 002 Seite 3 von 35 Page 3 of 35 Contents 1. GENERAL REMARKS ......................................................................................................... 4 1.1 COMPLEMENTARY MATERIALS .......................................................................................... 4 2. TEST SITES ...................................................................................................................... 4 2.1 T EST FACILITIES ............................................................................................................... 4 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS ............................................................... 5 2.3 TRACEABILITY .................................................................................................................. 6 2.4 CALIBRATION ................................................................................................................... 6 2.5 MEASUREMENT UNCERTAINTY........................................................................................... 6 2.6 L OCATION OF ORIGINAL DATA ........................................................................................... 6 2.7 STATUS OF FACILITY USED FOR TESTING ........................................................................... 6 3. GENERAL PRODUCT INFORMATION .................................................................................... 7 3.1 P RODUCT FUNCTION AND INTENDED USE ........................................................................... 7 3.2 RATINGS AND SYSTEM DETAILS ........................................................................................ 7 3.3 INDEPENDENT OPERATION MODES .................................................................................... 8 3.4 N OISE GENERATING AND NOISE SUPPRESSING PARTS ....................................................... 9 3.5 SUBMITTED DOCUMENTS .................................................................................................. 9 4. TEST SET-UP AND OPERATION MODES .............................................................................. 9 4.1 PRINCIPLE OF CONFIGURATION SELECTION ........................................................................ 9 4.2 T EST OPERATION AND TEST SOFTWARE ............................................................................ 9 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ........................................................ 10 4.4 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE ....................................................... 10 4.5 T EST SETUP DIAGRAM .................................................................................................... 11 5. TEST RESULTS ............................................................................................................... 13 5.1 TRANSMITTER REQUIREMENT & TEST SUITES .................................................................. 13 5.1.1 Antenna Requirement ................................................................................................................ 13 5.1.2 Peak Output Power .................................................................................................................... 14 5.1.3 6dB Bandwidth and 99% Bandwidth .......................................................................................... 17 5.1.4 Conducted Spurious Emissions measured in 100 kHz Bandwidth ............................................ 21 5.1.5 Power spectral density ............................................................................................................... 25 5.1.6 Spurious Emissions .................................................................................................................... 28 5.1.7 Radiated emissions .................................................................................................................... 29 5.1.8 Conducted emissions ................................................................................................................. 30 6. P HOTOGRAPHS OF THE TEST SET-UP .............................................................................. 31 7. LIST OF TABLES ............................................................................................................. 35 8. L IST OF PHOTOGRAPHS .................................................................................................. 35 Produkte Products Prüfbericht - Nr.: Test Report No. 17045688 002 Seite 4 von 35 Page 4 of 35 1. General Remarks 1.1 Complementary Materials All attachments are integral parts of this test report. This applies especially to the following appendix: Appendix A: Test Results of Bluetooth 4.0 Low Energy mode Appendix B: Test Results of RF Exposure 2. Test Sites 2.1 Test Facilities Accurate Technology Co., Ltd. (FCC Registration No.: 752051 & IC Registration Number: 5077A-2) F1, Bldg A, Changyuan New Material Port, Keyuan Rd., Science & Industry Park, Nanshan District, Shenzhen, 518057, P.R. China The tests at the test site have been conducted under the supervision of a TÜV engineer. Produkte Products Prüfbericht - Nr.: Test Report No. 17045688 002 Seite 5 von 35 Page 5 of 35 2.2 List of Test and Measurement Instruments Table 1: List of Test and Measurement Equipment Kind of Equipment Manufacturer Type S/N Calibrated until Radio Spectrum Test Spectrum Analyzer Rohde&Schwarz FSV40 101495 Jan.11, 2016 Test Receiver Ro…

Text truncated - open the document above for the full version.

Produkte Products Appendix A 17045688 002 Page 5 of 44 Produkte Products Appendix A 17045688 002 Page 6 of 44 Produkte Products Appendix A 17045688 002 Page 7 of 44 Produkte Products Appendix A 17045688 002 Page 8 of 44 Produkte Products Appendix A 17045688 002 Page 9 of 44 Produkte Products Appendix A 17045688 002 Page 10 of 44 Produkte Products Appendix A 17045688 002 Page 11 of 44 Middle Channel Produkte Products Appendix A 17045688 002 Page 12 of 44 Produkte Products Appendix A 17045688 002 Page 13 of 44 Produkte Products Appendix A 17045688 002 Page 14 of 44 Produkte Products Appendix A 17045688 002 Page 15 of 44 Produkte Products Appendix A 17045688 002 Page 16 of 44 Produkte Products Appendix A 17045688 002 Page 17 of 44 Produkte Products Appendix A 17045688 002 Page 18 of 44 Produkte Products Appendix A 17045688 002 Page 19 of 44 Produkte Products Appendix A 17045688 002 Page 20 of 44 High Channel Produkte Products Appendix A 17045688 002 Page 21 of 44 Produkte Products Appendix A 17045688 002 Page 22 of 44 Produkte Products Appendix A 17045688 002 Page 23 of 44 Produkte Products Appendix A 17045688 002 Page 24 of 44 Produkte Products Appendix A 17045688 002 Page 25 of 44 Produkte Products Appendix A 17045688 002 Page 26 of 44 Produkte Products Appendix A 17045688 002 Page 27 of 44 Produkte Products Appendix A 17045688 002 Page 28 of 44 Produkte Products Appendix A 17045688 002 Page 29 of 44 Appendix A.2: Radiated Emissions in Restricted Bands Low Channel Produkte Products Appendix A 17045688 002 Page 30 of 44 Produkte Products Appendix A 17045688 002 Page 31 of 44 High Channel Produkte Products Appendix A 17045688 002 Page 32 of 44 Produkte Products Appendix A 17045688 002 Page 33 of 44 Appendix A.3: Radiated Emissions Aux in playing with battery Produkte Products Appendix A 17045688 002 Page 34 of 44 Produkte Products Appendix A 17045688 002 Page 35 of 44 Produkte Products Appendix A 17045688 002 Page 36 of 44 Produkte Products Appendix A 17045688 002 Page 37 of 44 Aux in playing with AC/DC adapter Produkte Products Appendix A 17045688 002 Page 38 of 44 Produkte Products Appendix A 17045688 002 Page 39 of 44 Produkte Products Appendix A 17045688 002 Page 40 of 44 Produkte Products Appendix A 17045688 002 Page 41 of 44 Appendix A.4: Conducted Emissions Bluetooth playing with charging Produkte Products Appendix A 17045688 002 Page 42 of 44 Produkte Products Appendix A 17045688 002 Page 43 of 44 Aux in playing with charging Produkte Products Appendix A 17045688 002 Page 44 of 44 Produkte Products Appendix B 17045688 002 Page 1 of 2 Appendix B Test Results of RF Exposure APPENDIX B.1: RF EXPOSURE COMPLIANCE .................................................................................. 2 Produkte Products Appendix B 17045688 002 Page 2 of 2 Appendix B.1: RF Exposure Compliance Radio Frequency Exposure Compliance RESULT: Passed Test standard : FCC 1.1310 RSS-102 Issue 5 This device is mobile device, and the applicant declares that the minimum separation distance is greater than 20cm. Therefore MPE measurement or computational modeling should be used to determine compliance. MPE Calculation According to the formula π 2 4 * R GPout Pd= Where Pd = power density in mW/cm 2 or W/m2 Pout = output power to antenna in mW or W G = Antenna gain in numeric π = 3.14159 R = Distance between observation point and the center of radiator in cm or m In here Pout = 6.24dBm = 4.21mW G = -0.13dBi = 0.97 (numeric) R = 20cm For Bluetooth operation: 2 22 /00081.0 14159.3*20*4 97.0*21.4 4 * cmmW R GPout Pd=== π < 1mW/cm 2 for FCC limit 2 22 /0081.0 14159.3*2.0*4 97.0*00421.0 4 * mW R GPout Pd=== π < 5.4W/m 2 for IC limit The summed maximum permissible exposure (MPE) level is 0.00081mW/cm 2 and 0.0081W/m 2 . It is less than MPE limit 1mW/cm 2 for FCC and 5.4W/m 2 for IC, therefore the device compliance with MPE limit.

Produkte Products Prüfbericht - Nr.: Test Report No. 17045688 002 Seite 31 von 35 Page 31 of 35 6. Photographs of the Test Set-Up Photograph 1: Set-up for Spurious Emissions (9kHz-30MHz) Photograph 2: Set-up for Spurious Emissions (30MHz-1GHz) Produkte Products Prüfbericht - Nr.: Test Report No. 17045688 002 Seite 32 von 35 Page 32 of 35 Photograph 3: Set-up for Spurious Emissions (1GHz-18GHz) Photograph 4: Set-up for Spurious Emissions (18GHz-26GHz) Produkte Products Prüfbericht - Nr.: Test Report No. 17045688 002 Seite 33 von 35 Page 33 of 35 Photograph 5: Set-up for Radiated emissions, below 1GHz Photograph 6: Set-up for Radiated emissions, above 1GHz Produkte Products Prüfbericht - Nr.: Test Report No. 17045688 002 Seite 34 von 35 Page 34 of 35 Photograph 7: Set-up for Conducted emissions