A6O60001058RXX4 Mini Quadcopter

SHENZHEN HUBSAN TECHNOLOGY CO., LTD Date: 2014-4-15 To whom it may concern: We the undersigned, hereby authorize CMA Industrial Development Foundation Limited to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to those matters. Any and all acts carried out by authorize CMA Industrial Development Foundation Limited on our behalf shall have the same affect as acts of our own. Sincerely, Name: Sam Lee Title: General Manager Company Name: SHENZHEN HUBSAN TECHNOLOGY CO., LTD

SHENZHEN HUBSAN TECHNOLOGY CO., LTD Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: A6O60001058RX. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram A6O60001058RX BlkDia Schematics A6O60001058RX Schem Operational Description A6O60001058RX OpDes The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, ------------------------------ Sam Lee General Manager

SHENZHEN HUBSAN TECHNOLOGY CO., LTD 2014-4-16 Equipment Authorization Division Office id Engineering and Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Dear Sirs: SHENZHEN HUBSAN TECHNOLOGY CO., LTD requests acceptance of the labeling proposal described below for H107 bearing FCC identifier A6O60001058RX. The subject H107 models as shown in figure 1, authorized under FCC Part 15 Class C figure 1 SHENZHEN HUBSAN TECHNOLOGY CO., LTD It is because the surface of the device does not enough to indicate the FCC statement. For this reason, SHENZHEN HUBSAN TECHNOLOGY CO., LTD proposes those statements is showing on the user manual and the device is carrying the FCC ID number only. The figure2 is showing the FCC ID location. figure 2 Sincerely, ------------------------------- Sam Lee General Manager

SHENZHEN HUBSAN TECHNOLOGY CO., LTD FCC ID: A6O60001058X POWER OF ATTORNEY 2014-4-15 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize CMA Industrial Development Foundations Limited (Andrew Wong) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by CMA Industrial Development Foundation Limited (Andrew Wong) on our behalf shall have the same effect as acts of our own. This authorization expires one year from original date. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, SHENZHEN HUBSAN TECHNOLOGY CO., LTD, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, ------------------------------ Name: Sam Lee TITLE: General Manager

External Photo Helicopter without camera Helicopter with camera Charging cable

Label

Internal Photo

TEST REPORT Report No. : AS0021026(0) Date : 17 Apr 2014 For and on behalf of CMA Industrial Development Foundation Limited Authorized Signature : Page 1 of 30 Mr. WONG Lap-pong, Andrew Assistant Manager Electrical Division FCC ID: A6O60001058RX Application No. : LS010836(7) Applicant : Hubsan (HK) Industrial Co., Ltd. 4/F Hong Fa Hi-Tech Industrial Park, Tangtou Village, Baoan District, Shiyan Town, Shenzhen, China Client : Shenzhen Hubsan Technology Co., Ltd Rm409 Municipal Building, Hongli West Road, FuTian District, Shenzhen, China. Sample Description : Three(3) item of submitted sample stated to be X4 Mini Quadcopter of Model No. H107, H107C Sample registration No. : RS011794-003, RS015095-002 Radio Frequency : 2410MHz – 2465 MHz Transceiver Rating : 3.7V Rechargeable battery No. of submitted sample : Three (3) set (s) Date Received : 08 Apr 2014, 17 Apr 2014 Test Period : 08 Apr 2014 to 17 Apr 2014. Test Requested : FCC Part 15 Certificate Test Method : 47 CFR Part 15 (10-1-12 Edition) ANSI C63.4 – 2009 Test Engineer : Mr. LEUNG Shu-kan, Ken Test Result : See attached sheet(s) from page 2 to 30. Conclusion : The submitted sample was found to comply with requirement of FCC Part 15 Subpart C. TEST REPORT Report No. : AS0021026(0) Date : 17 Apr 2014 Page 2 of 30 FCC ID: A6O60001058RX Table of Contents 1 General Information ................................................................................................................................... 3 1.1 General Description ............................................................................................................................ 3 1.2 Location of the test site ....................................................................................................................... 4 1.3 List of measuring equipment............................................................................................................... 5 1.4 Measurement Uncertainty ................................................................................................................... 6 2 Description of the radiated emission test ................................................................................................... 7 2.1 Test Procedure .................................................................................................................................... 7 2.2 Test Result .......................................................................................................................................... 8 2.3 Radiated Emission Measurement Data ............................................................................................... 9 3 Description of the Line-conducted Test ................................................................................................... 11 3.1 Test Procedure .................................................................................................................................. 11 3.2 Test Result ........................................................................................................................................ 11 3.3 Graph and Table of Conducted Emission Measurement Data .......................................................... 11 4 Photograph ...............................................................................................................................................12 4.1 Photographs of the Test Setup for Radiated Emission and Conducted Emission ............................. 12 4.2 Photographs of the External and Internal Configurations of the EUT.............................................. 12 5 Supplementary document ......................................................................................................................... 13 5.1 Bandwidth ......................................................................................................................................... 13 5.2 Duty cycle ......................................................................................................................................... 13 5.3 Transmission time ............................................................................................................................. 13 5.4 Power Spectral Density..................................................................................................................... 13 5.5 Average on time ................................................................................................................................ 13 6 Appendices...............................................................................................................................................14 TEST REPORT Report No. : AS0021026(0) Date : 17 Apr 2014 Page 3 of 30 FCC ID: A6O60001058RX 1 General Information 1.1 General Description The equipment under test (EUT) is a transmitter for quadrocopter. The EUT is power by 3.7V rechargeable battery. It operates at 2410MHz – 2465 MHz. When the EUT receives the radio control signal from transmitter, the EUT will take the corresponding action. The brief circuit description is listed as follows: - U1, U2, U5 and its associated circuit act as MCU - U3 and its associated circuit act as power - U4, Y1 and its associated circuit act as RF module - M1, Q1, M2, Q2, M3, Q3, M4, Q4 and its associated circuit act as motor TEST REPORT Report No. : AS0021026(0) Date : 17 Apr 2014 Page 4 of 30 FCC ID: A6O60001058RX 1.2 Location of the test site FCC Registered Test Site Number: 552221 Radiated emissions measurements are investigated and taken pursuant to the procedures of ANSI C63.4 – 2009. A Semi-Anechoic Chamber Testing Site is set up for investigation and located at: Ground Floor, Yan Hing Centre, 9 – 13 Wong Chuk Yeung Street, Fo Tan, Shatin, New Territories, Hong Kong. Conducted emissions measurements are investigated and also taken pursuant to the procedures of ANSI C63.4 – 2009. A shielded room is located at : Ground Floor, Yan Hing C…

Text truncated - open the document above for the full version.

TEST REPORT Report No. : AS0021026(0) Date : 17 Apr 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 26 of 30 FCC ID: A6O60001058RX A6 Conducted Emission Measurement Date TEST REPORT Report No. : AS0021026(0) Date : 17 Apr 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 27 of 30 FCC ID: A6O60001058RX A6 Conducted Emission Measurement Date TEST REPORT Report No. : AS0021026(0) Date : 17 Apr 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 28 of 30 FCC ID: A6O60001058RX A6 Conducted Emission Measurement Date

TEST REPORT Report No. : AS0021026(0) Date : 17 Apr 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 29 of 30 FCC ID: A6O60001058RX A7. Band Edge Lower edge (Peak measurement) Lower edge (Average measurement) TEST REPORT Report No. : AS0021026(0) Date : 17 Apr 2014 Tested by: Reviewed by: Mr. LEUNG Shu-kan, Ken Mr. WONG Lap-pong, Andrew Page 30 of 30 FCC ID: VLEPL1180-T A7. Band Edge Higher edge (Peak measurement) Higher edge (Average measurement) ***** End of Report *****

Test Setup Photo Front view (30MHz – 1GHz) Rear view (30MHz – 1GHz) Front view (9kHz - 30MHz) Rear view (9kHz - 30MHz) Front view (1GHz – 25GHz) Rear view (1GHz – 25GHz) Conducted Emission (Front view) Conducted emission (Rear view) Conducted emission (Side view)