A6OHBS-H107DRXX4 FPV mini quadcopter

® 2.4GHZ RC SERIES 4 CHANNEL H107D-A05 Transmitter H107D X4 FPV mini quadcopter 1 INTRODUCTION Thank you for buying HUBSAN products. The quadcopter is designed as an easy to use, full featured RC model capable of hovering, fast forward, and aerobatic ight manoeuvres. Please read the manual carefully and follow all instructions in this. Be sure to retain the manual for future reference, routine maintenance, and tuning. 1.1 Important Notes This RC quadcopter is not a toy, it utilizes various high-techs to provide superior performance. Please read this manual carefully before operating this product. Any improper use of this product will result in serious injury. Be aware of your personal safety, safety of others and your surrounding environment. We recommend that you obtain the assistance of an experienced pilot before attempting to y our product for the rst time. 2.1 Caution R/C quadcopter have parts that move at high speed, thus posing a certain degree of danger. Pilots are responsible for any actions resulting in damage or injury from the improper operation of their R/C aircraft models. Choose a wide open space without obstacles. Do not operate R/C aircraft near buildings, crowds of people, high voltage cables, or trees to ensure the safety of yourself, others and your model. Operate this unit within your ability. Do not y when tired or after drinking or when impaired by medication. Improper operation may cause damage to people and property. 2.2 LiPo Battery Recharging Your quadcopter is powered by a Lithium-Polymer (LiPo) battery. Never recharge your battery whilst it is inserted in your model. It can catch re leading to the total destruction of the item. If you do not plan to y your model for a week or more, store the battery approximately 50% charged to maintain battery performance and life. To achieve a 50% charge, y the model until the battery requires recharging. Charge the battery for half the time typically required to fully charge the battery. 2 SAFETY NOTES Charge and store LiPo batteries in a location where a battery re or explosion (including smoke hazard) will not endanger life or property. Keep LiPo batteries away from children and animals. Consider how you would deal with a LiPo battery re/explosion as part of your normal home Fire Safety & Evacuation Planning. Never charge the LiPo battery that has ballooned or swelled due to over-/under-charging or from a crash. Never charge the LiPo battery that has been punctured or damaged in a crash (After a crash, inspect the battery pack for the sign of damage. Discard in accordance with your country’s recycling laws.). Never charge the LiPo battery in a moving vehicle. Never over charge the LiPo battery. Never leave the LiPo battery unattended during recharging. Do not charge LiPo batteries near ammable materials or liquids. Ensure that charging leads are connected correctly. Reverse polarity charging can lead to battery damage or a re or explosion. Have a suitable re extinguisher(electrical type) OR a large bucket of dry sand near the charging area . Do not try to extinguish electrical (LiPo) battery res with water. Reduce risks from re/explosion by storing and charging LiPo batteries inside a suitable container: a LiPo Sack or metal/ceramic container is advised. Monitor recharging LiPo batteries for signs of overheating. Protect your LiPo battery from accidental damage during storage and transportation. (Do not put battery packs in pockets or bags where they can short circuit or can come into contact with sharp or metallic objects.). If your LiPo battery is subjected to a shock (such as a helicopter crash) you should place it in a metal container and observe for signs of swelling or heating for at least 30 minutes. Do not attempt to disassemble or modify or repair the LiPo battery. LiPo batteries are dier from conventional batteries in that their chemical contents are encased in a relatively insubstantial foil packaging. This has the advantage of signicantly reducing their weight, but does make them more susceptible to damage if roughly or inappropriately handled. As with all batteries, there is a risk of re or explosion if safety practices are ignored: ! THE HUBSAN X42 THE HUBSAN X41 2.3 Prevent Moisture R/C models are composed of many precision electrical components. Store the battery and model in a dry area at room temperature. Exposure to water or moisture may cause the model to malfunction resulting in loss of responsiveness, or a crash. 2.4 Proper Operation For safety please only use Hubsan’s spare parts for replacement. 2.5 Always Be Aware Of The Rotating Propellers When in operation, the propellers will be spinning at high speed. The prop blades are capable of inicting serious body injury and damage to the property. Be cautious of your actions and careful to keep your body and loose clothing away from the blades. Never take your eyes o the model or leave it unattended while it is turned on. Stop operation immediately if the model ies out of your view. Once landed, immediately turn o the model and transmitter. 2.6 Avoid Flying Alone Beginners and all First Pilot View(FPV) iers should avoid ying alone when learning ight skills. It is advised that an experienced pilot be in nearby guidance. CAREFULLY INSPECT THE X4 BEFORE EVERY FLIGHT • Before operation, please check the batteries of the transmitter and receiver are charged enough for the ight. • Before turning on the transmitter, please check that the throttle stick is in the full down position. • Carefully check rotor blades and rotor holders. Broken or premature failure of parts will result in a dangerous situation. • Check the battery and power plug are securely fastened. Vibration and violent flight may lead the plug loosen and result in loss of control. • When turning on the unit, please follow the power on/off procedure: for Power ON- please turn on the transmitter rst, and then turn on the receiver. For Power OFF- please turn o the receive…

Text truncated - open the document above for the full version.

S Hubsan (HK) Industrial Co., Ltd. Add: 4/F Hong Fa Hi-Tech Industrial Park, Tangtou Village, Shiyan Town, Baoan district, Shenzhen, China Tel: +86755 8394 7818 Fax: +86755 2349 9031 2014-05-15 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: A6OHBS-H107DRX We hereby request confidential treatment of information accompanying this application as outlined below: - Schematics Diagram - Block Diagram - Operation description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s name / title : Sam Lee / Sales Manager Contact information / address : 4/F Hong Fa Hi-Tech Industrial Park, Tangtou Village, Shiyan Town, Baoan district, Shenzhen, China Tel: +86755 8394 7818 Fax: +86755 2349 9031 E-Mail: [email protected]

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 3 1. EXTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 3 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 3 Fig.5 Fig.6

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1 LABEL AND LOCATION Size: L2.0Cm*W1.0cm Material: Tagboard Glue: adhesive sticker Font color: Black Label color: White Label Location X4 FPV mini quadcopter Model No.: H107D FCC ID: A6OHBS-H107DRX

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 5 1. INTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 5 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 5 Fig.5 Fig.6 5.8G Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 5 Fig.7 Fig.8 2.4G Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 5 of 5 Fig.9 Fig.10

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 26 FCC TEST REPORT FOR Hubsan (HK) Industrial Co., Ltd. X4 FPV mini quadcopter Model No.: H107D Prepared for : Hubsan (HK) Industrial Co., Ltd. Address : 4/F Hong Fa Hi-Tech Industrial Park, Tangtou Village, Shiyan Town, Baoan district, Shenzhen, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd Address : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Date of receipt of test sample : May 04, 2014 Number of tested samples : 1 Serial number : Prototype Date of Test : May 04, 2014 - May 15, 2014 Date of Report : May 15, 2014 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 26 FCC TEST REPORT FCC CFR 47 PART 15 C(15.249): 2013 Report Reference No. ............... : LCS1405040063E Date of Issue ................................. : May 15, 2014 Testing Laboratory Name .......... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ......................................... : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Testing Location/ Procedure......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ....................... : Hubsan (HK) Industrial Co., Ltd. Address ......................................... : 4/F Hong Fa Hi-Tech Industrial Park, Tangtou Village, Shiyan Town, Baoan district, Shenzhen, China Test Specification Standard ........................................ : FCC CFR 47 PART 15 C(15.249): 2013 / RSS-210 Issue 8 / RSS-Gen Issue 3 Test Report Form No. ................... : LCSEMC-1.0 TRF Originator ............................. : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF .................................. : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ................ : X4 FPV mini quadcopter Trade Mark ................................... : Hubsan Model/ Type reference.................. : H107D Ratings .......................................... : DC 3.7V by Li-ion battery(380mAh) Result ......................................... : Positive Compiled by: Supervised by: Approved by: Leo Lee/ File administrators Danny Huang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 26 FCC -- TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS1405040063E May 15, 2014 Date of issue Type / Model........................... : H107D EUT......................................... : X4 FPV mini quadcopter Applicant............................... : Hubsan (HK) Industrial Co., Ltd. Address.................................. : 4/F Hong Fa Hi-Tech Industrial Park, Tangtou Village, Shiyan Town, Baoan district, Shenzhen, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Shenzhen Hubsan Technology Co., Ltd. Address................................... : Rm407, Municipal Service Building, Hong Li Road west, Futian District, Shenzhen, China Telephone............................... : / Fax.......................................... : / Factory................................... : Shenzhen Hubsan Technology Co., Ltd. Address................................... : Rm407, Municipal Service Building, Hong Li Road west, Futian District, Shenzhen, China Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 26 TABLE OF CONTENTS 1. GENERAL INFORMATION ....................................................................................................... 5 1.1. Description of Device (EUT) ................................................................................................................. 5 1.2. Host System Configuration List and Details .......................................................................................... 5 1.3. External I/O ............................................................................................................................................ 5 1.4. Description of Test Facility .................................................................................................................... 6 1.5. Statement of the measurement uncertainty ............................................................................................ 6 1.6. Measurement Uncertainty ...........................................................................................................…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: A6OHBS-H107DRX Report No.: LCS1405040063E _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1 1. TEST SETUP PHOTOGRAPHS 1.1 Photo Of Radiated Emission Measurement(X Position) Fig.1 Fig.2