A7M-TAGSLIMSlim Locator Card

QUICK SETUP GUIDE Slim Locator Card 2-Pack for iOS NS-TAGSLIM2PKRHK116NS-TAGSLIM NS-TAGSLIM4PK Before using your new product, please read these instructions to prevent any damage. PACKAGE CONTENTS • Slim locator card (2) • Lanyard (2) • Quick Setup Guide FEATURES • Compatible with Find My app • Bluetooth technology helps you find lost backpacks, purses, and more • Small, lightweight design with lanyard can easily be carried around • Audible notification alerts you when in range of your missing item • Operating range works within 65 ft. (19.81 m.) indoors and up to 164 ft. (49.98 m) outdoors COMPATIBILITY • Works with Find My app. • Works with iPhone/iPad iOS 14.5 or newer and macOS 12.5 or newer OVERVIEW SETTING UP YOUR SLIM LOCATOR CARD 1 On your smartphone or tablet: • Turn on Bluetooth. • Turn on location by tapping Settings > Privacy & Security, then turn on Location Services. 2 Swipe down and tap Find My to allow access to the location, then turn on Precise Location. USING YOUR SLIM LOCATOR CARD FOR THE FIRST TIME Initially you need to pair your slim locator card with your smartphone or tablet. 1 Press the power button on your slim locator card briefly until you hear the beep indicating your card is in pairing mode. 2 Open the Find My app, tap Add Item, then choose Other Supported Item. 3 When Insignia Slim Locator appears on the list, tap Connect and follow the on-screen instructions to complete the setup. TURNING OFF YOUR SLIM LOCATOR CARD If you don’t plan to use your slim locator card for an extended period, you should turn it off to conserve the battery. 1 Press and hold the power button for three seconds to switch your slim locator to power off. 2 To turn it back on, click the power button. SETTING UP “LOST MODE” To mark an item as lost when the slim locator card is out of range from the owner, you need to turn on the Lost Mode. 1 Open the Find My app, 2 Click Items at the bottom of the screen, then click the name of the lost item. 3 Under Lost Mode, click Enable. Follow the instructions on the screen and enter a phone number where you can be contacted. To enter an email address instead, click Use Email Address. Then click Enable. Note: Make sure to allow notifications from the Apple Find My app. VIEWING YOUR SLIM LOCATOR CARD ON THE MAP 1 Open the Find My app, then click the Items tab. 2 Select the Insignia Slim Locator you want to locate in the Items list. 3 If the slim locator card is within range of your device or the Apple Find My network has detected it recently, you can see it on the map. The updated location and time-stamp will be shown under its name. 4 If the slim locator card is out of range of your device or any devices in the Apple Find My network, you can see its last known location and time. To receive notifications when your slim locator card is within range of your device or detected by the Apple Find My network, turn on Notify When Found under Notifications. Power button Lanyard loop PLAYING SOUND 1 Open the Find My app on your iPhone, iPad, or MacBook, then click the Items tab. 2 In the Items list, select the Insignia Slim Locator you want to play a sound. 3 Click Play Sound. If your slim locator card is within range of the Bluetooth signal, it will play a sound. 4 To stop this sound before your slim locator card stops automatically, you click Stop Sound. Final flat size: 15.35 × 3.15 in. (390 × 80 mm) Fold size: 2.56 × 3.15 in. (65 × 80 mm) NS-TAGSLIM2PK_26-0228_QSG_V1_EN.ai 1 6/3/2026 7:38:13 PMNS-TAGSLIM2PK_26-0228_QSG_V1_EN.ai 1 6/3/2026 7:38:13 PM PMN: NS-TAGSLIM2PK, NS-TAGSLIM, NS-TAGSLIM4PK, RHK116 RESETTING YOUR SLIM LOCATOR CARD 1 Briefly press the button twice, holding it down on the second press for five seconds, then wait until you hear two beeps to confirm that the reset was successful. The Tag can now be paired again. 2 If the Insignia Slim Locator does not appear on the list, make sure that it is powered on, and place it close to the device you want to connect to. Then try to connect again. 3 The slim locator card can only be used on one Apple device at a time. If you want to add it to a new device you must remove it from the current device. DETECTING UNWANTED PAIRING 1 If any tag or other Find My network accessory product is left far away from its owners and moved with you for a period of time, it can send a notification to your Apple device through the Find My app. 2 These features are purposely built to prevent unknowing attempts to locate you, and if you feel your safety has been threatened, contact local law enforcement. This product has included the function of preventing unauthorized locating by others. It should not be used to locate people and property that does not belong to you. In many countries and regions around the world, it is a crime to use these products to locate someone without their consent. SAFETY INFORMATION WARNING 1. Do not dismantle or modify the product. 2. Do not store the product in wet conditions. 3. Do not use the product near heat sources. 4. Do not let water or any other liquid flow into the inside part of the product’s interface. This would cause damage to the product. 5. Avoid direct sunlight. 6. Keep away from children and pets to prevent accidental ingestion. 7. Stop using the product if overheating occurs. 8. Use a dry soft cloth to clean the surface of the product and avoid using harsh chemicals or strong detergents. SPECIFICATIONS • Dimensions: 3.34 × 2.11 × .12 in. (85.8 × 53.6 × 3.00 mm) • Weight: .56 oz. (16 g) • Bluetooth: BLE 5.1 • Battery: CR2032 / 225 mAh LEGAL NOTICES This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Note: This equi…

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Picus Advisors US LLC FRN: 0034336891 Contact Name: lvan Wang Address: 5855 SOVEREIGN DRSTE B-1, HOUSTON, TX 77036, USA Telephone No: (713) 391-4488 Email: [email protected] Applicant: Company name: Shenzhen Reflying Electronic Co., Ltd. FRN: 0021357322 Product Description: Slim Locator Card Grantee code: A7M FCC ID: A7M-TAGSLIM Contact Name: Wen Luo Address: 6 Bldg., Gaoxinjian Industrial Zone, Heping Villag, Fuyong Town, Bao'an District, Shenzhen, Guangdong China Telephone No: (86) 755-26718925 Email: [email protected] [Shenzhen Reflying Electronic Co., Ltd.] certifies that, as of the date of this filing of the application with the TCB, [Picus Advisors US LLC] is our designated US agent for service of process for the above referenced FCC ID. [Shenzhen Reflying Electronic Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Picus Advisors US LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 06.18.2026 Applicant’s Name: Wen Luo US Agent’s Name: lvan Wang Title: Manager Title: CEO Signature Signature

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Reflying Electronic Co., Ltd. Grantee code: A7M FCC ID: A7M-TAGSLIM FRN: 0021357322 Contact Name: Wen Luo Address: 6 Bldg., Gaoxinjian Industrial Zone, Heping Villag, Fuyong Town, Bao'an District, Shenzhen, Guangdong China Telephone No: (86) 755-26718925 Fax No: (86) 755-26718815 Email: [email protected] i. [Shenzhen Reflying Electronic Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shenzhen Reflying Electronic Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Shenzhen Reflying Electronic Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 06.18.2026 Applicant’s Name: Wen Luo Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Shenzhen Reflying Electronic Co., Ltd. Code 00018768 Ed. 2 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A Device Slim Locator Card Company name Shenzhen Reflying Electronic Co., Ltd. Grantee code A7M FCC ID A7M-TAGSLIM FRN 0021357322 Contact name Wen Luo Address 6 Bldg., Gaoxinjian Industrial Zone, Heping Villag, Fuyong Town, Bao'an District, Shenzhen, Guangdong China Telephone number (86) 755-26718925 E-mail [email protected] Chipset/module information AP2T21F40 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A 3 # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software 4 Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Wen Luo Date: 6/18/2026 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

Shenzhen Reflying Electronic Co., Ltd. Product Similarity Declaration Product name: Slim Locator Card Model name: NS-TAGSLIM2PK, RHK116, NS-TAGSLIM, NS-TAGSLIM4PK FCC ID: A7M-TAGSLIM We (Shenzhen Reflying Electronic Co., Ltd.) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature: Name: Wen Luo Title: Manager Date: 6/18/2026

TCB CALL página 1 File FCC ID: A7M-TAGSLIM Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. Google: TCB CALL página 2 EIN Statement TCB CALL página 3 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter"

C5266091_X10_Ed.2 1/1 Shenzhen Reflying Electronic Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 6/18/2026 Subject: Request for Confidentiality FCC ID: A7M-TAGSLIM To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Wen Luo Title: Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Shenzhen Reflying Electronic Co., Ltd. Address: 6 Bldg., Gaoxinjian Industrial Zone, Heping Villag, Fuyong Town, Bao'an District, Shenzhen, Guangdong China Product Name: Slim Locator Card Model Number: NS-TAGSLIM2PK, RHK116, NS-TAGSLIM, NS-TAGSLIM4PK FCC Identifier: A7M-TAGSLIM We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Wen Luo Date: 6/18/2026 Title: Manager Signature of applicant:

Page1of3ReportNo.:MTi260423035-0101 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] PhotographsoftheEUT(ExternalPhotos) Model:NS-TAGSLIM2PK Page2of3ReportNo.:MTi260423035-0101 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] Page3of3ReportNo.:MTi260423035-0101 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected]

53.60±0.15 85.80±0.15 3.00±0.15 1:1 7 6 5 4 3 2 7 6 5 4 3 2 7 比例 投影 单位 配件名称 产品编号 机 型 材 料 MM 批准 审核 设计 版次 日 期 修 改 说 明 深圳瑞福来智能科技股份有限公司 公 差 镭雕丝印图 MODEL:NS-TAGSLIM2PK Battery Capacity:540 mAh FCC ID: A7M-TAGSLIM IC: 24226-TAGSLIM HVIN: TAGSLIM SN: 1234567890123456 Made in Vietnam PMN: NS-TAGSLIM2PK 53.60±0.15 85.80±0.15 3.00±0.15 1:1 7 6 5 4 3 2 7 6 5 4 3 2 7 比例 投影 单位 配件名称 产品编号 机 型 材 料 MM 批准 审核 设计 版次 日 期 修 改 说 明 深圳瑞福来智能科技股份有限公司 公 差 镭雕丝印图 MODEL:NS-TAGSLIM Battery Capacity:540 mAh FCC ID: A7M-TAGSLIM IC: 24226-TAGSLIM HVIN: TAGSLIM SN: 1234567890123456 Made in Vietnam PMN:NS-TAGSLIM 53.60±0.15 85.80±0.15 3.00±0.15 1:1 7 6 5 4 3 2 7 6 5 4 3 2 7 比例 投影 单位 配件名称 产品编号 机 型 材 料 MM 批准 审核 设计 版次 日 期 修 改 说 明 深圳瑞福来智能科技股份有限公司 公 差 镭雕丝印图 MODEL:NS-TAGSLIM4PK Battery Capacity:540 mAh FCC ID: A7M-TAGSLIM IC: 24226-TAGSLIM HVIN: TAGSLIM SN: 1234567890123456 Made in Vietnam PMN:NS-TAGSLIM4PK 53.60±0.15 85.80±0.15 3.00±0.15 1:1 7 6 5 4 3 2 7 6 5 4 3 2 7 比例 投影 单位 配件名称 产品编号 机 型 材 料 MM 批准 审核 设计 版次 日 期 修 改 说 明 深圳瑞福来智能科技股份有限公司 公 差 镭雕丝印图 MODEL:RHK116 Battery Capacity:540 mAh FCC ID: A7M-TAGSLIM IC: 24226-TAGSLIM HVIN: TAGSLIM SN: 1234567890123456 Made in Vietnam PMN:RHK116

Page1of3ReportNo.:MTi260423035-0101 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] PhotographsoftheEUT(InternalPhotos) Model:NS-TAGSLIM2PK Page2of3ReportNo.:MTi260423035-0101 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] Page3of3ReportNo.:MTi260423035-0101 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected]

Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE038 Ver./Rev.：A1 Page1of6 RFEXPOSURE TestReport ReportNo.:MTi260423035-0101E2 Dateofissue:2026-05-21 Applicant:ShenzhenReflyingElectronicCo.,Ltd. Product:SlimLocatorCard Model(s):NS-TAGSLIM2PK,RHK116,NS-TAGSLIM,NS- TAGSLIM4PK FCCID:A7M-TAGSLIM ShenzhenMicrotestCo.,Ltd. TESTREPORT ReportNo.:MTi260423035-0101E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page2of6 Tableofcontents 1StandaloneSARtestexclusionconsiderations.................................................................4 2SARTestExclucsionThresholds.........................................................................................5 TESTREPORT ReportNo.:MTi260423035-0101E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page3of6 TestResultCertification ApplicantShenzhenReflyingElectronicCo.,Ltd. ApplicantAddress 6Bldg.,GaoxinjianIndustrialZone,HepingVillag,FuyongTown,Bao'an District,Shenzhen,GuangdongChina ManufacturerShenzhenReflyingElectronicCo.,Ltd. ManufacturerAddress 6Bldg.,GaoxinjianIndustrialZone,HepingVillag,FuyongTown,Bao'an District,Shenzhen,GuangdongChina FactoryShenzhenReflyingElectronicCo.,Ltd. FactoryAddress 6Bldg.,GaoxinjianIndustrialZone,HepingVillag,FuyongTown,Bao'an District,Shenzhen,GuangdongChina Productdescription ProductnameSlimLocatorCard TrademarkN/A ModelnameNS-TAGSLIM2PK SeriesModel(s)RHK116,NS-TAGSLIM,NS-TAGSLIM4PK Standards47CFRPart2.1093 TestmethodKDB447498D01v06 TestingInformation Dateoftest2026-05-13to2026-05-18 TestResultPass Preparedby:YaniceXie Reviewedby:DavidLee Approvedby:LewisLian TESTREPORT ReportNo.:MTi260423035-0101E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page4of6 1StandaloneSARtestexclusionconsiderations UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone1-g headorbodyand10-gextremitySARevaluationforgeneralpopulationexposureconditions,by measurementornumericalsimulation,isnotrequiredwhenthecorrespondingSARTest ExclusionThresholdcondition(s),listedbelow,is(are)satisfied. Thesetestexclusionconditionsarebasedonsource-basedtime-averagedmaximum conductedoutputpoweroftheRFchannelrequiringevaluation,adjustedfortune-uptolerance, andtheminimumtestseparationdistancerequiredfortheexposureconditions. Theminimumtestseparationdistancedefinedin4.1f)isdeterminedbythesmallestdistance fromtheantennaandradiatingstructuresoroutersurfaceofthedevice,accordingtothehost formfactor,exposureconditionsandplatformrequirements,toanypartofthebodyorextremity ofauserorbystander. ToqualifyforSARtestexclusion,thetestseparationdistancesappliedmustbefullyexplained andjustified,typicallyintheSARmeasurementorSARanalysisreport,bytheoperating configurationsandexposureconditionsofthetransmitterandapplicablehostplatform requirements,accordingtotherequiredpublishedRFexposureKDBprocedures. WhennootherRFexposuretestingorreportingarerequired,astatementofjustificationand compliancemustbeincludedintheequipmentapproval,inlieuoftheSARreport,toqualifyfor SARtestexclusion. Whenrequired,thedevicespecificconditionsdescribedintheotherpublishedRFexposure KDBproceduresmustbesatisfiedbeforeapplyingtheseSARtestexclusionprovisions. a)For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]·[√f(GHz)]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where  f (GHz) istheRFchanneltransmitfrequencyinGHz  PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison Thevalues3.0and7.5arereferredtoasnumericthresholdsinstepb)below Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mm, andfortransmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtest separationdistanceis<5mm,adistanceof5mmaccordingto4.1f)isappliedtodetermine SARtestexclusion. b)For100MHzto6GHzandtestseparationdistances>50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing(alsoillustratedinAppendixB): 1){[Powerallowedatnumericthresholdfor50mminstepa)]+[(testseparation distance–50mm)·(f(MHz)/150)]}mW,for100MHzto1500MHz 2){[Powerallowedatnumericthresholdfor50mminstepa)]+[(testseparation distance–50mm)·10]}mW,for>1500MHzand≤6GHz c)Forfrequenciesbelow100MHz,thefollowingmaybeconsideredforSARtestexclusion (alsoillustratedinAppendixC): 1)Fortestseparationdistances>50mmand<200mm,thepowerthresholdatthe correspondingtestseparationdistanceat100MHzinstepb)ismultipliedby[1+ log(100/f(MHz))] TESTREPORT ReportNo.:MTi260423035-0101E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page5of6 2)Fortestseparationdistances≤50mm,thepowerthresholddeterminedbythe equationinc)1)for50mmand100MHzismultipliedby½ 3)SARmeasurementproceduresarenotestablishedbelow100MHz. WhenSARtestexclusioncannotbeapplied,aKDBinquiryisrequiredtodetermineSAR evaluationrequirementsforanySARtestresultsbelow100MHztobeacceptable. 2SARTestExclucsionThresholds Weuse5mmasseparationdist…

Text truncated - open the document above for the full version.

Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE038 Ver./Rev.：A1 Page 1 of 54 TestReport ReportNo.:MTi260423035-0101E1 Dateofissue:2026-05-21 Applicant:ShenzhenReflyingElectronicCo.,Ltd. Product:SlimLocatorCard Model(s):NS-TAGSLIM2PK,RHK116,NS-TAGSLIM, NS-TAGSLIM4PK FCCID:A7M-TAGSLIM ShenzhenMicrotestCo.,Ltd. TESTREPORT ReportNo.:MTi260423035-0101E1 Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE038 Ver./Rev.：A1 Page 2 of 54 Tableofcontents 1GeneralDescription.......................................................................................................................4 1.1DescriptionoftheEUT.........................................................................................................4 1.2Descriptionoftestmodes.....................................................................................................4 1.3EnvironmentalConditions.....................................................................................................6 1.4Descriptionofsupportunits..................................................................................................6 1.5Measurementuncertainty.....................................................................................................6 2SummaryofTestResult................................................................................................................7 3TestFacilitiesandaccreditations................................................................................................8 3.1Testlaboratory......................................................................................................................8 4Listoftestequipment....................................................................................................................9 5EvaluationResults(Evaluation).................................................................................................11 5.1Antennarequirement.............................................................…

Text truncated - open the document above for the full version.