A7M-WLESS3IN1B3in1 Wireless Charging Stand

Size: 120x100mm Finished product: 60x100mm SAFETY INFORMATION FrontBack This product is safe for regular use under normal conditions. As with any device using electrical power, some situations may be unsafe and injuries or damages could result. To minimize or avoid unsafe conditions, read and follow the instructions before using. • Avoid dropping. • Do not disassemble. • Do not place metal objects between devices and the wireless charging pads. • Thick protective case (≥ .2 in. [5 mm]) or a case that includes a magnet or metallic material, may not allow proper charging function. • Keep wireless charging pad away from any liquid or moisture. • The maximum ambient temperature during use of this product must not exceed 95° F (35° C). • Do not place this device in re or other excessively hot environments. • Must use provided adapter for proper function, if not it may malfunction. • This product is intended for home ofce use. • For indoor use only. • Consult local staff before using the product near medical or industrial equipment or on board an aircraft. • Prevent cables from being pinched or damaged. • A damaged cable or device may malfunction and/or overheat. (Fire hazard). • Unplug the product if not used for an extended period of time. WARNING: • People with pacemakers should keep away from the magnets. The magnets can negatively affect the function of the pacemaker. • Do not place any bank or similar cards with magnetic strips or magnetically sensitive objects on the product. The data on the cards could be damaged or completely deleted. • Ensure that there are no metal parts on the back of your device. Metal heats up signicantly in the eld of an induction charger and can damage your device and/or the charger. LEGAL NOTICES FCC compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. RF Exposure: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. RSS-Gen statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Ce dispositif contient des émetteurs exonérés de permis(s)/récepteurs)s qui sont conformes aux RSS (s) exemptés de licence du Canada. L’opération est soumise aux deux conditions suivantes : 1. Cet appareil peut ne pas causer d’interférences. 2. Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent provoquer un fonctionnement indésirable de l’appareil. RSS-102 Statement This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Responsible party: Best Buy Purchasing, LLC. 7601 Penn Ave South, Richeld, MN 55423 U.S.A. 1-877-467-4289. (U.S. and Canada)

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:561-235-6113 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofShenzhenReflyingElectronicCo.,Ltd. TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ShenzhenReflyingElectronicCo.,Ltd. ProductDescription:3in1WirelessChargingStand FRN:0021357322 GranteeCode:A7M FCCID:A7M-WLESS3IN1B ContactName:WenLuo Address:6Bldg.,GaoxinjianIndustrialZone,HepingVillagFuyongTown,Bao'anDistrict, Shenzhen,GuangdongChina TelephoneNo:(86)755-26718925 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2025/12/15 Applicant’sName: ShenzhenReflyingElectronicCo.,Ltd. USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:ManagerTitle:Manager SignatureSignature

Rev 1/26/2023 Shenzhen Reflying Electronic Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Dec. 12, 2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: A7M-WLESS3IN1B [Shenzhen Reflying Electronic Co., Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Reflying Electronic Co., Ltd.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Wen Luo Rev 1/26/2023 Shenzhen Reflying Electronic Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Dec. 12, 2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: A7M-WLESS3IN1B [Shenzhen Reflying Electronic Co., Ltd.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Wen Luo

Shenzhen Reflying Electronic Co., Ltd. Family models declaration letter Dec. 16, 2025 We Shenzhen Reflying Electronic Co., Ltd. Of 6 Bldg., Gaoxinjian Industrial Zone, Heping Villag Fuyong Town, Bao’an District, Shenzhen, Guangdong China Declare under our sole responsibility that the product FCC ID: A7M-WLESS3IN1B Product: 3in1 Wireless Charging Stand Model Number: NS-WLESS3IN1B, RST173 All the models are the same circuit and module, except the model No.. Wen Luo/ Manager E-mail : [email protected] Phone : (86) 755-26718925 Fax : (86) 755-26718815 Address : 6 Bldg., Gaoxinjian Industrial Zone, Heping Villag Fuyong Town, Bao’an District, Shenzhen, Guangdong China

Shenzhen Reflying Electronic Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 12, 2025 Subject; Request for Confidentiality FCC ID: A7M-WLESS3IN1B To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Wen Luo Title: Manager

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen Reflying Electronic Co., Ltd. Date: Dec. 12, 2025 Product Model Number: NS-WLESS3IN1B, RST173 FCC ID: A7M-WLESS3IN1B To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: (86) 755-26718925 On behalf of: Shenzhen Reflying Electronic Co., Ltd.

Shenzhen Shenguang Electronic Technology Co.,LTD No. 1165, Guangming Road, Longhua District, Shenzhen City, Guangdong Province. 60 meters southward from here. Fang Xin Disk: 42.5*5.3*0.8, single coil, L = 16MM, 6.5uH ± 10%; Client TYPE SG-A1142.5-6.5UH TQE 1800510004 Model NO Part nunbering systey Client p/NO Enginrer NO Date 2025-11-17 PreparedCheckedApproved XieYanQiDuanJiaWangXieXiaoZai Authorixed Signaturure Company Chop EnginrerQC APProvedAPProved For Enginer Departner Only Rrvised ContentAPProved Date Shenzhen Shenguang Electronic Technology Co.,LTD 一、 Winding Procese: NO winding guageTurns direction of winding Note 1N12UEW-B-0.07*100P10TSCCW 2 二．FEATURES: 1.Test conditions：25°C,65%RH@100KHz/1V 1.1Inductance 1.11L0A（Single coil）=4.5uH±20% 1.12L0A(Coil + Magnetic Plate)=6.5uH±10% 1.2Q value=70MIN 1.3DCR：45mΩ MAX 1.4Operating Temperature：-25°C~85°C 2.Test instrument：L:创达 1068+1310;DCR:502BC;SIZE:Callipers 3. bill of materials NO Itemmaterials 1WIRE￠ 0.07*100P 2UEW 2FERRITE 42.5 * 5.3 * 0.8 L Dual-chamber Ferrite Hard Magnet 3GLUE white glues 4SOLDERXCD-907B 5 High temperature adhesive 6MM High Temperature Tape 6 7 Shenzhen Shenguang Electronic Technology Co.,LTD 三．CIRCUIT DIAGRAM Unit： MM 四． OUTSIDE DIAGRA Note: The outlet position of the coil is wrapped with 6MM (ref) high-temperature adhesive tape. ABCDEFIT STD 42.5±0.520.5±0.55.3±0.516±2 2-5 41.5±1.20.8±0.1 2.6Max Unit： MM 8 Shenzhen Shenguang Electronic Technology Co.,LTD 五 . PACKAGE 5.3 The packaging shall be based on the exusting packing plate and the actual delivery package shall prevail .If there is any requirement,we can customize it. 1400 Shenzhen Shenguang Electronic Technology Co.,LTD 六、Storage and Use condition 6.1 Storage condition 6.1.1 Recommended keeping conditions: -25°C ~85°C, 70%RH (Max.) 6.1.2 Storage life : Within the limits of six months from being produced. 6.2 Use condition Use condition limit: T=-25°C~85°C, RH≤ 90%.

Shenzhen Shenguang Electronic Technology Co.,LTD Factory 401, 1165 Guangjing Road, Guihuazhuang Community, Guanlan Street, Longhua District, Shenzhen City CUSTOMER: CUST P/N: NAMA P/N: DESC: DATE: Version: Hot air line CW11TS, 0.08*72, 8.1uH, Q > 70, lead-out length 6mm, magnetic sheet G42.5*5.3*0.8mm + 20*0.8mm, double slot, back adhesive 2024.08.06 A.0 PREPARED BYCHECKED BYAPPROVED BY CUSTOMER APPROVE Xie yanqi Duan jiawang Xie Xiaozi Wireless charging transmitting coil Shenzhen Fangxin Technology Co., Ltd. Shenzhen Shenguang Electronic Technology Co.,LTD Version Change History Rev.Before ChangAfter Change Change Date Approved By A.0 new issue ---- 20240806 Xie Xiaozi Shenzhen Shenguang Electronic Technology Co.,LTD DESC Hot air line CW11TS, 0.08*72, 8.1uH, Q > 70, lead-out length 6mm, magnetic sheet G42.5*5.3*0.8mm + 20*0.8mm, double slot, back adhesive Rev：A.0 CUST: CUST P/N: 一、DIMENSION:(mm) 二、SCHEMATIC DIAGRAM: A 42.5±0.5 B 39±1 C 20.5±0.5 D 20±0.3 E 2-4 H 6+2 I 0.8±0.1 T 2Max Note： 1. Cross-line exit; 2. Magnetic plate size: 42.5 ± 0.5 mm, thickness: 0.8 ± 0.1 mm. 3. Position sticker for the folded line: 3mm thick heat-resistant adhesive tape. 4. Distance between the two leads: 5mm (Ref) 三、Winding Specification: NO.TERMINAL WIRETurns Winding Direction 1SF Enamel-coated wire, 0.08 * 72P 11TsCW 四、 ELECTRICAL CHARACTERISTICS: TEMPERATURE:25±10°C, RELATIVE HUMIDITY:65±20% NO. ITEM TERMINALSPECIFICATIONTEST FREQUENCYTEST EQUIPMENTS 1 IND.S-F 4.8uH ±10% Single Coil 100KHz/1.0V CH 1063 2IND.S-F 8.1 microhenries ± 10% with magnetic sheet 100KHz/1.0VCH 1063 3DCRS-F 70mΩMAX 100KHz/1.0V502BC 4 Q S-F70MIN100KHz/1.0V502BC PREPARED BY/DATECHECKED BY/DATE 2024-8-62024-8-6 Fangxin Technology Shenzhen Shenguang Electronic Technology Co.,LTD 五、Material List: NO. Material name DescriptionMartnumberMaterial 1 Hot air line 0.08*72P 2UEW 2 Lead-free tin rod high temperature 3 Acetone water / 4 glueWater-based glue white 5 magnetic sheet Hard magnetic size G42.5*5.3*0.8 + 20*0.8 PC40 6 gum double-sided adhesive 7NTC / 8 9 10 11 12 六、PACKAGE 6.1 packaging picture 6.2 Packing Quantity: 6.3 The packaging shall be based on the exusting packing plate and the actual delivery package shall prevail .If there is any requirement,we can customize it. ItemQuantityMaterial Box 400 Pcs370*265*55mm Big Carton 1200 Pcs420*270*310mm 七、Storage and Use condition 7.1 Storage condition 7.1.1 Recommended keeping conditions: -25°C ~85°C, 70%RH (Max.) 7.1.2 Storage life : Within the limits of six months from being produced. 7.2 Use condition Use condition limit: T=-25°C~85°C, RH≤ 90%.

Ext Photos Model: NS-WLESS3IN1B Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7

12 mm 10.66 mm 57.50 mm 35.50 mm 41 mm 121mm 位置在凹槽中心位置 41.00 mm 41.00 mm 整体size:56.2x33.1mm 25K07R000001为流水码 字体大小：Human BBY oice-Regular 6.5 PT 22.00 mm 8.65 mm 8.00 mm 1.2 mm 2.7 mm 2.1 mm 35.6 mm 5 mm 3-in-1 Wireless Charging Stand Model: NS-WLESS3IN1B Made in Vietnam S/N: 25K07R000001 Total Output: 20W Max FCC ID: A7M-WLESS3IN1B Input: PD 27W Min (5V 3A, 9V 3A) Wireless Output: Total 15W Max USB
Output for Watch Charger: 5V


1A (iPhone: 15W Max, AirPods: 5W Max, Watch: 5W Max)

Int Photos Model: NS-WLESS3IN1B Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Phone ANT AirPods ANT Photo 7 Photo 8 Photo 9 Photo 10 Photo 11 Photo 12

- Page 1 of 12 - Report No.: HB20251113052E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: 3in1 Wireless Charging Stand Trade Mark: N/A Model Number: NS-WLESS3IN1B FCC ID: A7M-WLESS3IN1B Prepared for Shenzhen Reflying Electronic Co., Ltd. 6 Bldg., Gaoxinjian Industrial Zone, Heping Villag Fuyong Town, Bao’an District, Shenzhen, Guangdong China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 12 - Report No.: HB20251113052E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT ................................................................................................................................ 8 4 RF EXPOSURE .................................................................................................................................................. 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Test Setup .................................................................................................................................................... 9 4.1.4. Test Result ................................................................................................................................................... 9 5 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 12 - Page 3 of 12 - Report No.: HB20251113052E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Reflying Electronic Co., Ltd. Address ................................. : 6 Bldg., Gaoxinjian Industrial Zone, Heping Villag Fuyong Town, Bao’an District, Shenzhen, Guangdong China Manufacturer's Name .......... : Shenzhen Reflying Electronic Co., Ltd. Address ................................. : 6 Bldg., Gaoxinjian Industrial Zone, Heping Villag Fuyong Town, Bao’an District, Shenzhen, Guangdong China Product description Product name ........................ : 3in1 Wireless Charging Stand Model Number ....................... : NS-WLESS3IN1B Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Nov. 13, 2025~Dec. 11, 2025 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 12 - Report No.: HB20251113052E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Rev…

Text truncated - open the document above for the full version.

- Page 1 of 34 - Report No.: HB20251113052E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: 3in1 Wireless Charging Stand Trade Mark: N/A Model Number: NS-WLESS3IN1B FCC ID: A7M-WLESS3IN1B Prepared for Shenzhen Reflying Electronic Co., Ltd. 6 Bldg., Gaoxinjian Industrial Zone, Heping Villag Fuyong Town, Bao’an District, Shenzhen, Guangdong China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 34 - Report No.: HB20251113052E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 6 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................. 7 3 TEST FACILITIES AND ACCREDITATIONS ............................................................................................................ 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 8 4 LIST OF TEST EQUIPMENT .............................................................................................................................. 10 5 TEST ITEM AND RESULTS ............................................................................................................................... 12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 22 6 PHOTOGRAPHS OF THE TEST SETUP............................................................................................................... 24 7 PHOTOGRAPHS OF THE EUT .......................................................................................................................... 26 - Page 3 of 34 - Report No.: HB20251113052E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Reflying Electronic Co., Ltd. Address ................................. : 6 Bldg., Gaoxinjian Industrial Zone, Heping Villag Fuyong Town, Bao’an District, Shenzhen, Guangdong China Manufacturer's Name .......... : Shenzhen Reflying Electronic Co., Ltd. Address ................................. : 6 Bldg., Gaoxinjian Industrial Zone, Heping Villag Fuyong Town, Bao’an District, Shenzhen, Guangdong China Product description Product name ........................ : 3in1 Wireless Charging Stand Model Number ....................... : NS-WLESS3IN1B Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ............................................ : Date (s) of performance of tests ............. : Nov. 13, 2025~Dec. 11, 2025 Test Result ............................................... : Pass Testing Engineer : (Zoe Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 34 - Report No.: HB20251113052E-01 …

Text truncated - open the document above for the full version.

Photographs of the Test Setup Model: NS-WLESS3IN1B Radiated Emission Below 30MHz Radiated Emission Above 30MHz Conducted Emission MPE