
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
433 SAR Specific Absorption Rate of Mobile Phones, etc. Specific Absorption Rate (SAR) This model phone FOMA N906iL meets the MIC’s *1 technical regulation for exposure to radio waves. The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The regulation employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit is 2 watts/kilogram (W/kg) *2 averaged over ten grams of tissue. The limit includes a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The value of the limit is equal to the international guidelines recommended by ICNIRP *3 . All phone models should be confirmed to comply with the regulation, before they are available for sale to the public. The highest SAR value for this model phone FOMA N906iL is 0.32 W/kg. It was taken by the Telecom Engineering Center (TELEC), a Registered Certification Agency on the Radio Law. The test for SAR was conducted in accordance with the MIC testing procedure using standard operating positions with the phone transmitting at its highest permitted power level in all tested frequency bands. While there may be differences between the SAR levels of various phones and at various positions, they all meet the MIC’s technical regulation. Although the SAR is determined at the highest certified power level, the actual SAR of the phone during operation can be well below the maximum value. For further information about SAR, please visit the following websites: Radio Frequency (RF) Signals THIS MODEL PHONE MEETS THE U.S. GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone contains a radio transmitter and receiver. Your phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. World Health Organization (WHO): http://www.who.int/peh-emf/ ICNIRP: http://www.icnirp.de/ MIC: http://www.tele.soumu.go.jp/e/ele/body/index.htm TELEC: http://www.telec.or.jp/ENG/Index_e.htm NTT DoCoMo: http://www.nttdocomo.co.jp/english/product/ NEC: http://www.n-keitai.com/lineup/ (in Japanese only) Association of Radio Industries and Businesses: http://www.arib-emf.org/index.html (in Japanese only) *1Ministry of Internet Affairs and Communications *2The technical regulation is provided in Article 14-2 of the Ministry Ordinance Regulating Radio Equipment. *3International Commission on Non-lonizing Radiation Protection 434 SAR The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the U.S. government-adopted requirement for safe exposure. The tests are performed on position and locations (for example, at the ear and worn on the body) as required by FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 0.22W/kg, and when worn on the body, is 0.32W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the U.S. government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section at https:// gullfoss2.fcc.gov/oetcf/eas/reports/GenericSearch.cfm after search on FCC ID A98-FOMA-N906IL. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. FCC Regulations This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which ca…
Text truncated - open the document above for the full version.
From: Pham, Johnny Sent: Thursday, March 27, 2008 7:17 PM To: PCTEST TCB Subject: RE: Questions Regarding FCC ID: A98-FOMA-N906IL Greg, Please see the inserted answers below. Regards, Johnny Pham -----Original Message----- From: PCTEST TCB [mailto:[email protected]] Sent: Thursday, March 27, 2008 2:59 PM To: Pham, Johnny Subject: Questions Regarding FCC ID: A98-FOMA-N906IL To: Mr. Johnny Pham/ NEC Corporation of America From: Mr. Gregory Czumak/ PCTEST TCB RE: FCC ID: A98-FOMA-N906IL Applicant: NEC Corporation of America Correspondence Reference Number: A9880153 Confirmation Number: 803040153-5 Date of Original Email: March 27, 2007 Subject: Request for additional information In regards to your recent TCB application referenced above, we kindly request that you provide the following additional information. 1. Please submit a Block Diagram of the RFID transmitter, including the values of all of the clocks/oscillators, as required. [Pham, Johnny] ANSWER: Completed. Please find the attached file. 2. Please identify the RFID schematics within the Schematics Exhibit (I see “Felica” at the bottom of the chip on p.2, but do not see anything connected to it (e.g., antenna connection)). [Pham, Johnny] ANSWER: RFID is indicated in page 2 and 4 of the schematics. RFID IC supports a contacless interface and uses HHP's antenna as described in the circuit description document. 3. The schematics reference a “Bluetooth” transmitter- please clarify if the EUT contains a Bluetooth transmitter or not. [Pham, Johnny] ANSWER: Bluetooth transmitter is disabled as indicated in page 12 of the schematics. 4. Please enter the maximum SAR levels in the User’s Manual and resubmit it. [Pham, Johnny] ANSWER: Completed. Please find the attached file. 5. Please address Section 15.203 for the RFID transmitter. [Pham, Johnny] ANSWER: Please see the response in question 2 above. 6. Please verify that multi-slot transmission is not available in GPRS mode. If it is, please revise the SAR report accordingly. [Pham, Johnny] ANSWER: This project supports only Mutislot class 8 which is 1 uplink and 1 downlink The items indicated above must be submitted before processing can continue on the above referenced application. Sincerely, Gregory Czumak Senior Certification Engineer Quality Manager PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road Columbia, MD 21045 410-290-6652 410-290-6654 (Fax) [email protected] This communication and its attachments contain information from PCTEST Engineering Laborator y, Inc., and is intended for the exclusive use of the recipient (s) named above. It may contain information that is confidential and/or legally privileged. Any unauthorized use that ma y compromise that confidentiality via distribution or disclosure is prohibited. Please notify the sender immediately if you receive this communication in error, and delete it from your computer system. Usage of PCTEST email addresses for non-business related activities is strictly prohibited. No warranty is made that the e-mail
From: Pham, Johnny Sent: Friday, March 28, 2008 1:08 PM To: PCTEST TCB Subject: RE: Follow-Up Question Regarding FCC ID: A98-FOMA-N906IL Hi Greg, WLAN function is designed to operate only in Japan. Regards, Johnny Pham -----Original Message----- From: PCTEST TCB [mailto:[email protected]] Sent: Friday, March 28, 2008 11:46 AM To: Pham, Johnny Subject: Follow-Up Question Regarding FCC ID: A98-FOMA-N906IL Dear Johnny, Thank you for your response to the referenced application. Please see below follow- up question pertaining to your submittal. Follow-Up RT: 1. We note, however, that an apparently functioning WLAN is also shown on p.12 of the schematics. Unlike the BT shown there, it does not appear to be disabled. Is this the case? Please address. The items indicated above must be submitted before processing can continue on the above referenced application. Sincerely, Gregory Czumak Senior Certification Engineer Quality Manager PCTEST Engineering Laboratory, Inc. 6660-B Dobbin Road Columbia , MD 21045 410-290-6652 410-290-6654 (Fax) [email protected] This communication and its attachments contain information from PCTEST Engineering Laboratory, Inc., and is intended for the exclusive use of the recipient (s) named above. It may contain information that is confidential and/or legally privileged. Any unauthorized use that may compromise that confidentiality via distribution or disclosure is prohibited. Please notify the sender immediately if you receive this communication in error, and delete it from your computer system. Usage of PCTEST email addresses for non-business related activities is strictly prohibited. No warranty is made that the e-mail or attachment(s) are free from computer virus or other defect. Thank you.
Reviewed by: COMPANY NAME: NEC Corporation of America Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 1 of 5 EXTERNAL PHOTOGRAPHS Reviewed by: COMPANY NAME: NEC Corporation of America Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 2 of 5 Reviewed by: COMPANY NAME: NEC Corporation of America Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 3 of 5 Reviewed by: COMPANY NAME: NEC Corporation of America Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 4 of 5 Reviewed by: COMPANY NAME: NEC Corporation of America Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 5 of 5 Reviewed by: FCC ID: A98-FOMA-N906IL FCC Pt. 15B MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0803040254.A98 March 11, 2008 PCS GSM/GPRS Phone Page 19 of 20 © 2008 PCTEST Engineering Laboratory, Inc. REV 5.2CT 12/31/07 10.0 EUT PHOTOGRAPHS Reviewed by: FCC ID: A98-FOMA-N906IL FCC Pt. 15B MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0803040254.A98 March 11, 2008 PCS GSM/GPRS Phone Page 20 of 20 © 2008 PCTEST Engineering Laboratory, Inc. REV 5.2CT 12/31/07
FCC ID Label Placement Rear View Without Battery Pack Please see a separate file for detailed drawing of a label FOMA N906iL:IMEI Label Layout (Japanese accreditation mark) Colour of the outer case <Silver> <Brown> Month and Year of manufacture Certification number (TELEC) Certification number (JATE) Product number Product number barcode MAC ADDRESS Applicant/Manufacturer: NEC Corporation Model code: FOMA N906iL Warning: Please switch off this mobile phone on the airplane. Please do not removethis sticker. FOMA card Common battery pack (A-face display)
Reviewed by: COMPANY NAME: NEC Corporation of Amaerica Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 1 of 12 INTERNAL PHOTOGRAPHS Reviewed by: COMPANY NAME: NEC Corporation of Amaerica Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 2 of 12 Reviewed by: COMPANY NAME: NEC Corporation of Amaerica Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 3 of 12 Reviewed by: COMPANY NAME: NEC Corporation of Amaerica Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 4 of 12 Reviewed by: COMPANY NAME: NEC Corporation of Amaerica Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 5 of 12 Reviewed by: COMPANY NAME: NEC Corporation of Amaerica Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 6 of 12 Reviewed by: COMPANY NAME: NEC Corporation of Amaerica Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 7 of 12 Reviewed by: COMPANY NAME: NEC Corporation of Amaerica Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 8 of 12 Reviewed by: COMPANY NAME: NEC Corporation of Amaerica Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 9 of 12 Reviewed by: COMPANY NAME: NEC Corporation of Amaerica Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 10 of 12 Reviewed by: COMPANY NAME: NEC Corporation of Amaerica Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 11 of 12 Reviewed by: COMPANY NAME: NEC Corporation of Amaerica Quality Manager Test Date(s): EUT Type: FCC ID: A98-FOMA-N906IL March 07, 2008 PCS GSM/GPRS Phone Page 12 of 12
Reviewed by: FCC ID: A98-FOMA-N906IL FCC Pt. 15B MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0803040254.A98 March 11, 2008 PCS GSM/GPRS Phone Page 1 of 20 © 2008 PCTEST Engineering Laboratory, Inc. REV 5.2CT 12/31/07 Applicant Name: Date of Testing: NEC Corporation of America March 11, 2008 Radio Communications Systems Division Test Site/Location: 6535 N. State Highway 161 PCTEST Lab, Columbia, MD, USA Irving, TX 75039 USA Test Report Serial No.: 0803040254.A98 FCC ID: A98-FOMA-N906IL APPLICANT: NEC Corporation of America EUT Type: PCS GSM/GPRS Phone Model(s): FOMA N906iL FCC Rule Part(s): FCC Part 15 Subpart B FCC Classification: FCC Class B Digital Device (JBP) Test Procedure: ANSI C63.4-2003 The device bearing the FCC Identifier specified above has been shown to comply with the applicable technical standards as indicated in the measurement report and has been tested in accordance with the measurement procedures specified in ANSI C63.4-2003 (See Test Report). These measurements were performed with no deviation from the standards. I authorize and attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. NVLAP accreditation does not constitute any product endorsement by NVLAP or any agency of the United States Government. PCTEST certifies that no party to this application has been denied the FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. PCTEST ENGINEERING LABORATORY, INC. 6660-B Dobbin Road, Columbia, MD 21045 USA Tel. 410.290.6652 / Fax 410.290.6554 http://www.pctestlab.com CERTIFICATE OF COMPLIANCE FCC Part 15B Certification Reviewed by: FCC ID: A98-FOMA-N906IL FCC Pt. 15B MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0803040254.A98 March 11, 2008 PCS GSM/GPRS Phone Page 2 of 20 © 2008 PCTEST Engineering Laboratory, Inc. REV 5.2CT 12/31/07 TABLE OF CONTENTS FCC Class B MEASUREMENT REPORT.....................................................................................3 1.0 INTRODUCTION ..............................................................................................................................4 1.1 SCOPE .................................................................................................................................................. 4 1.2 PCTEST TEST LOCATION ................................................................................................................... 4 2.0 PRODUCT INFORMATION..............................................................................................................5 2.1 EQUIPMENT DESCRIPTION ................................................................................................................ 5 2.2 OPERATION MODE.............................................................................................................................. 5 2.3 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS ............................................................................. 5 2.4 LABELING REQUIREMENTS ............................................................................................................... 5 3.0 DESCRIPTION OF TEST.................................................................................................................6 3.1 EVALUATION PROCEDURE................................................................................................................ 6 3.2 CONDUCTED EMISSIONS ................................................................................................................... 6 3.3 RADIATED EMISSIONS........................................................................................................................ 7 4.0 SAMPLE CALCULATIONS ..............................................................................................................8 4.1 CONDUCTED EMISSION MEASUREMENT SAMPLE CALCULATION ............................................... 8 4.2 RADIATED EMISSION MEASUREMENT SAMPLE CALCULATION.................................................... 8 5.0 TEST EQUIPMENT CALIBRATION DATA ......................................................................................9 6.0 ENVIRONMENTAL CONDITIONS .................................................................................................10 7.0 TEST DATA ....................................................................................................................................11 7.1 SUMMARY .......................................................................................................................................... 11 7.2 TEST SUPPORT EQUIPMENT ........................................................................................................... 11 7.3 RADIATED MEASUREMENT DATA ................................................................................................... 12 7.4 LINE CONDUCTED MEASUREMENT DATA ..................................................................................... 13 8.0 CONCLUSION................................................................................................................................15 9.0 TEST SETUP PHOTOGRAPHS ....................................................................................................16 10.0 EUT PHOTOGRAPHS ...................................................................................................................19 Reviewed by: FCC ID: A98-FOMA-N906IL FCC Pt. 15B MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0803040254.A98 March 11, 2008 PCS GSM/GPRS Phone Page 3 of 20 © 2008 PCTEST Engineering Laboratory, Inc. REV 5.2CT 12/31/07 MEASUREMENT REPORT FCC Part 15B – U…
Text truncated - open the document above for the full version.
Reviewed by: FCC ID: A98-FOMA-N906IL FCC Pt. 15B MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0803040254.A98 March 11, 2008 PCS GSM/GPRS Phone Page 16 of 20 © 2008 PCTEST Engineering Laboratory, Inc. REV 5.2CT 12/31/07 9.0 TEST SETUP PHOTOGRAPHS Reviewed by: FCC ID: A98-FOMA-N906IL FCC Pt. 15B MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0803040254.A98 March 11, 2008 PCS GSM/GPRS Phone Page 17 of 20 © 2008 PCTEST Engineering Laboratory, Inc. REV 5.2CT 12/31/07 Reviewed by: FCC ID: A98-FOMA-N906IL FCC Pt. 15B MEASUREMENT REPORT (CERTIFICATION) Quality Manager Test Report S/N: Test Dates: EUT Type: 0803040254.A98 March 11, 2008 PCS GSM/GPRS Phone Page 18 of 20 © 2008 PCTEST Engineering Laboratory, Inc. REV 5.2CT 12/31/07
6660-B Dobbin Road · Columbia, Maryland · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15B | - | - |

Cellular WCDMA and PCS GSM Phone with RFID
Equipment Class
JBP - Part 15 Class B Computing Device Peripheral
Cellular WCDMA and PCS GSM Phone with WLAN and RFID
Equipment Class
DTS - Digital Transmission System
Cellular/ PCS GSM and Cellular WCDMA Phone with WLAN, Bluetooth and RFID
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Digital Portable Cellular Telephone
Equipment Class
JBP - Part 15 Class B Computing Device Peripheral
GSM/EGPRS/WCDMA/LTE MOBILE PHONE
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter