Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 4 | 24E | 1.93 GHz - 1.99 GHz | 24.5 W | 300KG7W | 90
Hz |
Grant NotesPowers listed are conducted. The equipment can be configured in the PCS1900 and GSM850 bandwidth, respectively with the following radio Module : RM 30W PCS1900 (Hardware Code NTN050PM ), HPRM 60W GSM850 (Hardware Code NTN050JA), and with following coupling devices Dual Diplexer Module (DDM), Hybrid H2 DDM , Tx Filter (TxF) , H2 TxF , in both GMSK and 8PSK modulation techniques.
To comply with the FCC spurious emissions requirements, all configurations must be configured with the following restrictions.
FCC Rule Part 22 Subpart H :
The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values are required for edge channels [ARFCN 128, 131, 133, 181, 183, 231, 233, 251] for the following GSM850 configurations :
� Configurations in GMSK Modulation: 6dB power reduction [DDM & TxF configuration], 2dB power reduction [H2 DDM & H2 TxF configuration].
� Configurations in 8PSK Modulation: 4dB power reduction [DDM & TxF configuration ],
FCC Rule Part 24 Subpart E.
The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values for the following PCS1900 configurations are:
� Configurations in GMSK Modulation: 2dB power reduction [DDM &TxF configuration]
� Configurations in 8PSK Modulation: 2dB power reduction [DDM &TxF configuration].
RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of �1.1307(b)(3).