ACJ96NKX-TGA277DECT 6.0 Handset

Operating Instructions Digital Cordless Answering System Digital Cordless Phone Model No. KX-TG2711 KX-TG2712 Model No. KX-TG2721 KX-TG2722 KX-TG323SK Model shown is KX-TG2711. Before initial use, see “Getting Started” on page 9. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 39. For assistance, visit our Web site: http://www.panasonic.com/help for customers in the U.S.A. or Puerto Rico. Please register your product: http://www.panasonic.com/prodreg PNQX6299ZA_0628_v0.1.2.pdf 12013/06/28 16:49:34 Introduction Model composition .......................................3 Accessory information ..................................3 Important Information For your safety .............................................5 Important safety instructions ........................6 For best performance ...................................6 Other information .........................................7 Specifications ...............................................8 Getting Started Setting up .....................................................9 Note when setting up .................................10 Intelligent eco mode ...................................10 Controls ......................................................11 Display .......................................................12 Initial settings .............................................12 Making/Answering Calls Making calls ...............................................14 Answering calls ..........................................14 Useful features during a call .. .....................15 Shared Phonebook Shared phonebook .....................................17 Programming Programmable settings ..............................19 Registering a unit .......................................21 Caller ID Service Using Caller ID service ...............................22 Caller list ....................................................22 Answering System Answering system ......................................24 Turning the answering system on/ off ...............................................................24 Greeting message ......................................24 Listening to messages using the base unit .............................................................25 Listening to messages using the handset ......................................................25 Remote operation .......................................26 Answering system settings .........................27 Voice Mail Service Voice mail service ......................................29 Intercom/Locator Intercom .....................................................30 Handset locator ..........................................30 Transferring calls, conference calls .. ..........30 Useful Information Wall mounting ............................................31 Error messages ..........................................32 Troubleshooting .........................................32 FCC and other information .........................36 Guía Rápida Española Guía Rápida Española ...............................39 Appendix Customer services .....................................43 Warranty (For United States and Puerto Rico) ...........................................................44 Index Index...........................................................46 2 Table of Contents PNQX6299ZA_0628_v0.1.2.pdf 22013/06/28 16:49:35 Model composition SeriesModel No. Base unitHandset Part No.Part No.Quantity KX-TG2711 s eries KX-TG2711KX-TG2711KX-TGA2771 KX-TG2712KX-TG2711KX-TGA2772 KX-TG2721 s eries KX-TG2721KX-TG2721KX-TGA2771 KX-TG2722KX-TG2721KX-TGA2772 KX-TG323SK KX-TG2721KX-TGA2773 Accessory information Supplied accessories No. Accessory item/ O rder number Quantity KX-TG2711 K X-TG2721 KX-TG2712 K X-TG2722 KX-TG323SK AAC adaptor/ P NLV226Z 123 BTelephone line cord/ P QJA10075Z 111 CRechargeable batteries/ H HR-4DPA 246 D Handset cover * 1, *2 123 E Charger * 3 –12 *1 The handset cover comes attached to the handset. *2 PNYNTGA277MR: Black/Metallic gray, PNYNTGA277WR: White *3 PNLC1030YB: Black, PNLC1030YM: Metallic gray, PNLC1030ZW: White A BCDE For assistance, please visit http://www.panasonic.com/help 3 Introduction PNQX6299ZA_0628_v0.1.2.pdf 32013/06/28 16:49:35 Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 43). Accessory itemOrder number Rechargeable b a tteries HHR-4DPA *1 RT o order, please call 1-800-332-5368 or visit http://www.panasonic.com/batterystore Battery type: – N ickel metal hydride (Ni-MH) – 2 x AAA (R03) size for each handset T-adaptorKX-J66 Range extender KX-TGA405 * 2 *1 Replacement batteries may have a different capacity from that of the supplied batteries. *2 By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. This product can be purchased online. Please visit our Web site: http://www.panasonic.com/RangeExtender Expanding your phone system Handset (optional): KX-TGA421 You can expand your phone system by re gistering optional handsets (6 max.) to a single base unit. ROptional handset is a different design from that of the supplied handsets. RYou cannot purchase the supplied handset (KX-TGA277) separately. 4 For assistance, please visit http://www.panasonic.com/help Introduction PNQX6299ZA_0705_v0.2.2.pdf 42013/07/05 9:44:42 For your safety T o prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection RU se only the power source marked on the product. RDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock. RCompletely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat …

Text truncated - open the document above for the full version.

EXHIBIT A STATEMENT OF SECURITY CODE This cordless telephone system has more than 1,000 billion combinations that are provided by the following means:  Provided with 128 bits for security codes.  When shipped from the factory, the security code is decided by the manufacture. It is memorized in a memory IC.  Base and Handset knows each other’s security code information.

Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] Richard Mullen Group Manager Product Safety and Compliance Division Power of Attorney July 5, 2013 PCTP-12-F019 Federal Communication Commission Equipment Authorization Division / Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Panasonic Corporation of North America hereby authorizes Nemko AS to act on our behalf in all matters relating to the preparation of TCB Certification application for the below described product, which are in compliance with FCC Part 15D. Any and all acts carried out by Nemko AS on our behalf shall have the same effects as acts of our own for a period of one year from the date of this letter. Type Filing: Original Application for DECT Cordless Telephone Handset, Model KX-TGA277 1 Product Classification: Part 15 Unlicensed PCS Portable Tx Held to Ear (PUE) FCC ID Handset Unit ACJ96NKX-TGA277 FCC Rule Part: FCC Part 15, Subpart D Frequency Range: 1921.536 ~ 1928.448 MHz RF Output Power: 0.066 Watts Power Supply: AC Adaptors, Model PNLV226(FW) with switching power supply at 54 kHz or Model PNLV226(UC) with switching power supply at 38 kHz; and optional Battery Charger Model PNLC1030. Responsible Panasonic Corporation of North America Applicant & Grantee: One Panasonic Way, Secaucus, NJ 07094 FRN Number: 0003762242 Responsible Manufacturer: Panasonic System Networks Co., Ltd. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division 1 DECT Handset Model KX-TGA227 under FCC ID: ACJ96NKX-TGA277 will be marketed with DECT Base Models KX-TG2711 and KX- TG2721 Series, which will be was Part 15D certified under FCC ID: ACJ96NKX-TG4221. Panasonic Corporation of North America One Panasonic Way 4B-8 Secaucus, NJ 07094 Tel: 201-348-7758 / Fax: 201-392-4564 [email protected] Richard Mullen Group Manager Product Safety and Compliance Division Request for Confidentiality July 5, 2013 PCTP-12-F019 Federal Communication Commission Equipment Authorization Division Application Processing Branch 7435 Oakland Mills Road Columbia, Maryland 21046 To whom it may concern; Type Filing: Original Application for DECT Cordless Telephone Handset, Model KX-TGA277 Product Classification: Part 15 Unlicensed PCS Portable Tx Held to Ear (PUE) FCC ID Handset Unit ACJ96NKX-TGA277 FCC Rule Part: FCC Part 15, Subpart D In accordance with provisions of Sections 0.457 and 0.459 of the Commission’s Rules and Section 552(b)(4) of the Freedom of Information Act, we request permanent confidentiality for exhibits, which contain: (1) Antenna Construction; (2) Description of Electrical Circuitry; (3) Schematic Diagrams of Handset Unit and RF Unit; and (4) Block Diagram. The transmitter is not user adjustable and does not have a Tune-Up Procedure. These exhibits contain proprietary, confidential and trade secrets material, which would not be routinely made available for public inspection. In accordance with FCC Public DA 04-1705, we request forty-five day short-term confidentiality, starting from the from the issuance of equipment authorization date, for exhibits, which contain: (1) External Photographs of Handset Unit and RF Unit; (2) Internal Photographs of Handset Unit and RF Unit; (3) Test Setup Photographs; and (4) User Manual. These exhibits contain pre-market information, which could give our competitors unfair advantage should this information be released before this product is actually introduced into the common marketplace. Sincerely yours, Richard Mullen Richard Mullen Group Manager Panasonic Corporation of North America Product Safety and Compliance Division

EXTERNAL PHOTOGRAPHS KX-TGA277 Bottom View

EXHIBIT B MARKINGS Portable Unit: FCC ID label The marking will be shown on the battery compartment of the portable unit. NOTE: The portable unit is sold without the battery installed. NOTE: Above markings are shown on bottom of the base unit. Nameplate The nameplate is located on the battery compartment of the portable unit.

INTERNAL PHOTOGRAPHS Internal View-1 KX-TGA277 Internal View-2 KX-TGA277

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. SAR_Report_Nemko_60320_6130194_FCC_DECT_Plots_KX-TGA277 Page 1 of 8 Appendix for the Report Dosimetric Assessment of the Portable Device KX-TGA277 (FCC ID: ACJ96NKX-TGA277) (IC: 216A-KXTGA277) According to the FCC Requirements SAR Distribution Plots July 11, 2013 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1 - 62, 4 - chome Minoshima, Hakata, Fukuoka 812-8531 Japan The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. This version supersedes all previous versions of this report. SAR_Report_Nemko_60320_6130194_FCC_DECT_Plots_KX-TGA277 Page 2 of 8 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Table of Contents 1 SAR DISTRIBUTION PLOTS, HEAD MEASUREMENT ..................................................................... 3 2 SAR DISTRIBUTION PLOTS, BODY MEASUREMENT ..................................................................... 7 SAR_Report_Nemko_60320_6130194_FCC_DECT_Plots_KX-TGA277 Page 3 of 8 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo 1 SAR Distribution Plots, Head Measurement Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: TGA277_yplm_1.da4 DUT: Panasonic; Type: KX-TGA277; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.41 mho/m; ε r = 41; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(4.89, 4.89, 4.89); Calibrated: 19.02.2013 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 20.09.2012 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek Left/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.047 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.60 V/m; Power Drift = -0.146 dB Peak SAR (extrapolated) = 0.090 W/kg SAR(1 g) = 0.047 mW/g; SAR(10 g) = 0.026 mW/g Maximum value of SAR (measured) = 0.051 mW/g Fig. 1: SAR distribution for DECT US, channel 2, cheek position, left side of head, (July 10, 2013; Ambient Temperature: 22.4°C; Liquid Temperature: 22.0°C). SAR_Report_Nemko_60320_6130194_FCC_DECT_Plots_KX-TGA277 Page 4 of 8 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: TGA277_yplm_2.da4 DUT: Panasonic; Type: KX-TGA277; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.41 mho/m; ε r = 41; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(4.89, 4.89, 4.89); Calibrated: 19.02.2013 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 20.09.2012 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Tilted Left/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.022 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.01 V/m; Power Drift = -0.002 dB Peak SAR (extrapolated) = 0.037 W/kg SAR(1 g) = 0.022 mW/g; SAR(10 g) = 0.013 mW/g Maximum value of SAR (measured) = 0.023 mW/g Fig. 2: SAR distribution for DECT US, channel 2, tilted position, left side of head, (July 10, 2013; Ambient Temperature: 22.4°C; Liquid Temperature: 22.0°C). SAR_Report_Nemko_60320_6130194_FCC_DECT_Plots_KX-TGA277 Page 5 of 8 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: TGA277_yprm_1.da4 DUT: Panasonic; Type: KX-TGA277; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.41 mho/m; ε r = 41; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(4.89, 4.89, 4.89); Calibrated: 19.02.2013 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 20.09.2012 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek Right/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.037 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.15 V/m; Power Drift = 0.055 dB Peak SAR (extrapolated) = 0.061 W/kg SAR(1 g) = 0.038 mW/g; SAR(10 g) = 0.022 mW/g Maximum value of SAR (measured) = 0.042 mW/g Fig. 3: SAR distribution for DECT US, channel 2, cheek position, right side of head, (July 10, 2013; Ambient Temperature: 22.4°C; Liquid Temperature: 22.0°C). SAR_Report_Nemko_60320_6130194_FCC_DECT_Plots_KX-TGA277 Page 6 of 8 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: TGA277_yprm_2.da4 DUT: Panasonic; Type: KX-TGA277; Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.41 mho/m; ε r = 41; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(4.89, 4.89, 4.89); Calibrated: 19.02.2013 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn631; Calibrated: 20.09.2012 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD…

Text truncated - open the document above for the full version.

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. SAR_Report_Nemko_60320_6130194_FCC_DECT_KX-TGA277_Confidential Page 1 of 31 Report Dosimetric Assessment of the Portable Device KX-TGA277 (FCC ID: ACJ96NKX-TGA277) (IC: 216A-KXTGA277) According to the FCC Requirements July 11, 2013 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1 - 62, 4 - chome Minoshima, Hakata, Fukuoka 812-8531 Japan The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. This version supersedes all previous versions of this report. SAR_Report_Nemko_60320_6130194_FCC_DECT_KX-TGA277_Confidential Page 2 of 31 Dasy_Report_FCC_DECT_1900_1.4.doc/10.07.2013/AvB Executive Summary The KX-TGA277 is a new cordless phone (Portable Device) from Panasonic operating in the 1920 MHz frequency range. The device has an integrated antenna and work in US DECT standard. The objective of the measurements done by IMST was the dosimetric assessment of one device in a worst case setup in head and body worn configuration. The handset was set to use one specific frequency and maximum output power during the measurement. The examinations have been carried out with the dosimetric assessment system „DASY4“. The measurements were made according to the Supplement C to OET Bulletin 65 of the Federal Communications Commission (FCC) Guidelines [OET 65] for evaluating compliance of mobile and portable devices with FCC limits for human exposure (general population) to radiofrequency emissions and IC RSS 102 Issue 4. Additional information and guidelines given by the following FCC documents were used:  SAR Measurement Requirements for 100 MHz to 6 GHz [KDB 865664 D01 v01r01]  Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies [KDB 447498 D01 v05r01] All measurements have been performed in accordance to the recommendations given by SPEAG. SAR_Report_Nemko_60320_6130194_FCC_DECT_KX-TGA277_Confidential Page 3 of 31 Dasy_Report_FCC_DECT_1900_1.4.doc/10.07.2013/AvB Compliance Statement The Panasonic KX-TGA277 cordless phone (FCC ID: ACJ96NKX-TGA277; IC: 216A-KXTGA277) is in compliance with the Federal Communications Commission (FCC) Guidelines [OET 65] for uncontrolled exposure. The phone was tested in addition to the head positions in the following body worn configurations:  display towards the phantom, distance 0 mm  display towards the ground, distance 0 mm The maximum results of SAR for the KX-TGA277 are as follows: Band Frequency [MHz] CH Phantom Configuration Figure No. Highest Measured SAR 1g [W/kg] Highest Reported SAR 1g [W/kg] Plot No. US DECT 1924.992 2 Left Head Cheek 14 0.0468 0.0468 3 Body Worn Pos. 1 18 0.0433 0.0433 5 prepared by: ........................................ reviewed by: ..................................... Alexander Rahn André van den Bosch test engineer quality assurance engineer SAR_Report_Nemko_60320_6130194_FCC_DECT_KX-TGA277_Confidential Page 4 of 31 Dasy_Report_FCC_DECT_1900_1.4.doc/10.07.2013/AvB Table of Contents 1 SUBJECT OF INVESTIGATION .......................................................................................................... 5 2 THE IEEE STANDARD C95.1-1999 AND THE FCC EXPOSURE CRITERIA .................................... 5 2.1 DISTINCTION BETWEEN EXPOSED POPULATION, DURATION OF EXPOSURE AND FREQUENCIES ........... 5 2.2 DISTINCTION BETWEEN MAXIMUM PERMISSIBLE EXPOSURE AND SAR LIMITS .................................... 6 2.3 SAR LIMIT ..................................................................................................................................... 6 3 THE FCC MEASUREMENT PROCEDURE ......................................................................................... 7 3.1 GENERAL REQUIREMENTS .............................................................................................................. 7 3.2 DEVICE OPERATING NEXT TO A PERSON’S EAR ................................................................................ 7 3.2.1 PHANTOM REQUIREMENTS ......................................................................................................... 7 3.2.2 TEST POSITIONS ........................................................................................................................ 7 3.2.3 TEST TO BE PERFORMED .......................................................................................................... 10 3.2.4 MEASUREMENT VARIABILITY ..................................................................................................... 10 4 BODY-WORN CONFIGURATIONS ................................................................................................... 11 4.1 POC (PTT) POSITION ................................................................................................................... 11 4.2 PHANTOM REQUIREMENTS ............................................................................................................ 11 4.3 TEST TO BE PERFORMED .............................................................................................................. 11 5 THE MEASUREMENT SYSTEM ........................................................................................................ 12 5.1 PHANTOMS................................................................................................................................... 13 5.2 E-FIELD-PROBES ......................................................................................................................... 14 5.3 MEASUREMENT PROCEDURE ........................................................................................................ 15 5.4 UNCERTAINTY ASSESSMENT ...............…

Text truncated - open the document above for the full version.

Report No. 239942-2 Template version: B Nemko Norway Nemko AS, Instituttveien 6, P.O. Box 96 Kjeller, 2027 Kjeller, Norway TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected] ENTERPRISE NUMBER NO974404532 nemko.com/no Test Report Product UPCS Handset Name and address of the applicant Panasonic Corporation of North America Name and address of the manufacturer Panasonic System Networks Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku Fukuoka 812-8531, Japan Model KX-TGA277 Rating / Trademark Panasonic Serial number / Additional information / Tested according to FCC Part 15, subpart D Isochronous UPCS Device, 1920 – 1930 MHz Industry Canada RSS 213, Issue 2 2 GHz License-exempt Personal Communications Service Devices (LE-PCS) Order number 239942 Tested in period 2013.06.28 to 2013.07.04 Issue date 2013.07.05 Name and address of the testing laboratory Instituttveien 6 Kjeller, Norway FCC No: 994405 IC OATS: 2040D-1 TEL: (+47) 22 96 03 30 FAX: (+47) 22 96 05 50 Prepared by [Frode Sveinsen] Approved by [G.Suhanthakumar] This report shall not be reproduced except in full without the written approval of Nemko. Opinions and interpretations expressed within this report are not part of the current accreditation. This report was originally distributed electronically with digital signatures. For more information contact Nemko. TEST REPORT FCC part 15D Report no.: 239942-2 FCC ID: ACJ96NKX-TGA277 Nemko Norway, Instituttveien 6, Kjeller, Norway Page 2 (52) CONTENTS 1 INFORMATION ................................................................................................................................. 3 1.1 Tested Item........................................................................................................................................ 3 1.2 Description of Tested Device ............................................................................................................. 3 1.3 Exposure Evaluation .......................................................................................................................... 3 1.4 Test Environment .............................................................................................................................. 4 1.5 Test Engineer(s) ................................................................................................................................ 4 1.6 Test Equipment ................................................................................................................................. 4 1.7 Other Comments ............................................................................................................................... 4 2 TEST REPORT SUMMARY .............................................................................................................. 5 2.1 General .............................................................................................................................................. 5 2.2 Test Summary ................................................................................................................................... 6 3 TEST RESULTS ................................................................................................................................ 7 3.1 Power Line Conducted Emissions ..................................................................................................... 7 3.2 Coordination with fixed microwave .................................................................................................. 10 3.3 Digital Modulation Techniques ........................................................................................................ 10 3.4 Labeling Requirements ................................................................................................................... 10 3.5 Antenna Requirement...................................................................................................................... 11 3.6 Channel Frequencies ...................................................................................................................... 11 3.7 Automatic Discontinuation of Transmission .................................................................................... 12 3.8 Peak Power Output ......................................................................................................................... 13 3.9 Emission Bandwidth B ..................................................................................................................... 18 3.10 Power Spectral Density ................................................................................................................... 21 3.11 In-Band Unwanted Emissions, Conducted ...................................................................................... 24 3.12 Out-of-band Emissions, Conducted................................................................................................. 26 3.13 Carrier Frequency Stability .............................................................................................................. 33 3.14 Frame Repetition Stability ............................................................................................................... 34 3.15 Frame Period and Jitter ................................................................................................................... 34 3.16 Monitoring Threshold, Least Interfered Channel ............................................................................. 36 3.17 Threshold Monitoring Bandwidth ..................................................................................................... 38 3.18 Reaction Time and Monitoring Interval ............................................................................................ 39 3.19 Time and Spectrum Window Access Procedure ............................................................................. 41 3.20 Acknowledgements and Transmission Duration .…

Text truncated - open the document above for the full version.

TEST SET-UP PHOTOS Project no.: 239942 FCC ID: ACJ96NKX-TGA277 Page 1 (1) PHOTOS OF TEST SET-UP Power line Conducted Emissions Test

The Testcenter facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. SAR_Report_Nemko_60320_6130194_FCC_DECT_KX-TGA277_Pictures Page 1 of 4 Appendix for the Report Dosimetric Assessment of the Portable Device KX-TGA277 (FCC ID: ACJ96NKX-TGA277) (IC: 216A-KXTGA277) According to the FCC Requirements July 11, 2013 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Panasonic System Networks Co., Ltd. 1 - 62, 4 - chome Minoshima, Hakata, Fukuoka 812-8531 Japan The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. This version supersedes all previous versions of this report. SAR_Report_Nemko_60320_6130194_FCC_DECT_KX-TGA277_Pictures Page 2 of 4 Dasy_Report_FCC_DECT_1900_1.3.doc/10.09.2010/ABo 1 Subject of Investigation Fig. 1: Pictures of the device under test. 8.9 Pictures of the Device under Test Figure 13 shows the device under test. Fig. 13: Pictures of the device under test. SAR_Report_Nemko_60320_6130194_FCC_DECT_KX-TGA277_Pictures Page 3…

Text truncated - open the document above for the full version.