AIERIT32-152MVHF-FM VOICE MESSAGE TRANSMITTER

RQT-152M_UserMan.pdf TYPE OF EXHIBIT: INSTALLATION AND OPERATING INSTRUCTION MANUAL FCC PART: 2.1033 (c)(3) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 25, 2011 Included in this exhibit are draft copies of the User Manual for RITRON Models RQT-152M and RQA- 152M VHF-FM Voice Message Transmitters. These manuals provide the end user with installation and operating instructions. Signed: Michael A. Pickard - Project Engineer For assistance, call RITRON at 800-872-1872, or go to www.ritron.com Quick Talk TM Wireless Voice Monitor & Alarm Owner’s Manual ________________________________________________________________________________ • CONSTRUCTION • FACTORIES • WAREHOUSES • FARMS • UTILITIES • AIRPORTS • RETAIL STORES • SECURITY • LAW ENFORCEMENT • SHIPPING • APARTMENTS • SPORTS • HOTELS • RESTAURANTS • SCHOOLS • TRANSPORTATION ________________________________________________________________________________ Ritron Publication 145000081 Rev. B 10-11 © 2011 Ritron, Inc. All rights reserved. Ritron, Patriot, Jobcom, OutPost, GateGuard, Quiet Call and Quick Assist are registered trademarks of Ritron, Inc. Quick Talk, Liberty and RadioNexus are trademarks of Ritron, Inc. Call 800-USA-1-USA for the right Wireless Solutions to your communication needs. P.O. Box 1998 • Carmel, Indiana 46082-1998 • USA Phone: 317-846-1201; 800-USA-1-USA (800-872-1872) • Fax: 317-846-4978 Email: [email protected] ________________________________________________________________________________ For assistance, call RITRON at 800-872-1872, or go to www.ritron.com TABLE OF CONTENTS.................................................................................................................................................................. Description Page A BOUT THE QUICK TALK TM WIRELESS VOICE MONITOR & ALARM What this Manual Covers...................................................... 1 General Information.............................................................. 1 Quick Talk TM Models and Frequencies ................................. 1 Accessories for Quick Talk TM ................................................ 1 Quick Talk TM Features .......................................................... 1 P LEASE NOTE THE FOLLOWING WITH REGARD TO RF EXPOSURE ... 2 I MPORTANT SAFETY INFORMATION................................................ 3 C ARE AND MAINTENANCE............................................................ 3 F REQUENTLY ASKED QUESTIONS ABOUT QUICK TALK TM PROGRAMMING........................................................................... 3 QUICK TALK TM PROGRAMMABLE FEATURES.................................. 4 Summary Screen .................................................................. 4 FIG-1: Programmer Summary Screen............................... 4 Message Configuration ..................................................... 4 Table 1: Maximum Message Length (sec.) ....................... 4 Transmit Messages on Startup ......................................... 4 Append Power and Battery Messages .............................. 4 External Power Fail Alarm Enable..................................... 4 Low Battery Alarm Enable................................................. 4 Play Location Message ..................................................... 4 Inputs Checked Every ....................................................... 4 Message Delay on TX ....................................................... 4 Description ........................................................................4 Input Screen ......................................................................... 5 FIG-2: Programmer Input Screen...................................... 5 Frequency Table ............................................................... 5 Transmit Frequency.......................................................... 5 QC or DQC Code.............................................................. 5 DQC Invert ........................................................................ 5 Compand........................................................................... 5 TX Alert Tone.................................................................... 6 Input Type ......................................................................... 6 FIG-3: Example of Analog Input Type ............................... 6 FIG-4: Example of Terminated Alarm Input Type .............. 6 Latching............................................................................. 6 ANI .................................................................................... 6 Input Operation ................................................................. 6 Message Repeat ............................................................... 7 Voice Messages ................................................................ 7 Description Page Power Options Screen.......................................................... 7 FIG-5: Programmer Power Options Screen ...................... 7 Frequency Table ............................................................... 7 Transmit Frequency.......................................................... 7 QC or DQC Code.............................................................. 8 DQC Invert ........................................................................ 8 Compand.......................................................................... 8 TX Alert Tone.................................................................... 8 ANI .................................................................................... 8 Message Repeat............................................................... 8 Q UICK TALK TM FACTORY DEFAULT PROGRAMMING....................... 8 QUICK TALK TM TRANSMITTER TABLE FREQUENCIES AND TONES..... 9 Table 2: MURS model radios only ...................................…

Text truncated - open the document above for the full version.

RQT-152M_Attest.pdf TYPE OF EXHIBIT: DESCRIPTION OF MEASUREMENT FACILITY FCC PART: 2.948 MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 25, 2011 The ERP and field strength of spurious emissions measurements filed with this application were made on a site certified by RITRON, Inc. Data pertaining to this site are on file with the FCC and Industry Canada. This site is used on a continuing basis exclusively by RITRON, Inc. and is utilized only for RF field strength measurements of equipment designed and manufactured by RITRON, Inc. It is not used for measurements by, or for, any other party on a contract basis or otherwise. All other measurements were taken at RITRON’s engineering laboratory in Carmel, IN. Signed: Michael A. Pickard - Project Engineer RQT-152M_Attest.pdf TYPE OF EXHIBIT: MANUFACTURER’S STATEMENT FCC PART: 2.1033 (c)(1-2) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 25, 2011 The RITRON models RQA-152M and RQT-152M are designed for operation strictly limited to MURS frequencies as defined in FCC Part 95.1309 with a channel bandwidth defined in FCC Part 95.632. Its output power is set at 2.0 watts. This product will be manufactured and marketed on a continuing basis in the United States of America by the applicant, RITRON, Inc. of Carmel, IN. Signed: Michael A. Pickard - Project Engineer RQT-152M_Attest.pdf TYPE OF EXHIBIT: STATEMENT OF CERTIFYING ENGINEER FCC PART: 2.947 MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 25, 2011 I, Michael A. Pickard, have been employed by RITRON, Inc. since November 1979, working in the Engineering Department since June 1981 as a radio frequency Project Engineer. I hereby certify that all the measurements and data herein were taken by me, or under my direct supervision and that they were obtained using sound and accepted engineering principles and that they accurately reflect the performance and characteristics of the unit tested. Further, I attest that manufacturing controls exist such that this data are representative of units which will be manufactured by RITRON. Signed: Michael A. Pickard - Project Engineer RQT-152M_Attest.pdf TYPE OF EXHIBIT: ANTI-DRUG ABUSE CERTIFICATION MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 25, 2011 I, Michael A. Pickard, certify that RITRON is not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance . Signed: Michael A. Pickard - Project Engineer

Ritron, Inc. 505 W. Carmel Drive • Carmel, IN 46032-7564 P.O. Box 1998 • Carmel, IN 46082-1998 Ph: 317-846-1201 Fax: 317-846-4978 Email: [email protected] Web Site: www.ritron.com November 8, 2011 Ritron Inc. 505 West Carmel Dr. Carmel, IN 46032 Timco Engineering Inc. 849 NW State Road 45 Newberry, Florida 32669 REFERENCE: JOB 2495UC11 Dear Sir/Madam: In response to the following request dated 10/26/2011: Based upon our review of this application we have the following questions: 1. TEST SETUP PHOTOS: We did not receive any test setup photos with this filing. Please send them at your earliest convenience. Thank you. 2. 2.1047: states that the audio frequency response must be measured from 100Hz to at least 5000Hz. Please correct this in your test report. 3. MURS Frequencies: The EUT was tested on Frequencies other than MURS frequencies. Please explain why this was done? Also please explain how you will prevent this transmitter from being user on an unauthorized frequency. 1. The submitted test report exhibit RQT-152M_TestRpt.pdf included a photograph of the Ritron 3 meter test site. I have extracted this page and submitted it as a separate exhibit RQT-152M_TestSetup.pdf. 2. Included with this response is an updated test report exhibit RQT-152M_TestRpt2.pdf with audio frequency response from 100Hz to 5000Hz per FCC Part 2.1047(a). 3. Testing was performed for Part 90 radio AIERIT32-152, which was submitted to Timco Engineering on October 21, 2011. All MURS frequencies are within the tested operating range. The Part 90 radio AIERIT32-152 and the Part 95J radio AIERIT32-152M are identical except for the frequency programming restrictions. The Part 95J MURS radio AIERIT32-152M has no provisions for programming on any except the 5 MURS frequencies. Frequencies are programmed exclusively from a table that only contains the 5 MURS frequencies using the Ritron PC Programmer. Sincerely, Michael A. Pickard Project Engineer Ritron, Inc. Ritron, Inc. 505 W. Carmel Drive • Carmel, IN 46032-7564 P.O. Box 1998 • Carmel, IN 46082-1998 Ph: 317-846-1201 Fax: 317-846-4978 Email: [email protected] Web Site: www.ritron.com TIMCO ENGINEERING INC. TCB & FCB 849 NW State Road 45 FCC Approvals Newberry, Florida 32669 Industry Canada Approvals http://www.timcoengr.com Notified Body for Europe 888.472.2424 F 352.472.2030 email: [email protected] 10/26/2011 MR. SAM DULANEY RITRON, INC. 317-846-1201 EXT. 182 317-846-4978 [email protected] SUBJECT: TIMCO-TCB/Request for additional info - RITRON, INC. - FCC ID: AIERIT32-152M - JOB #: 2495UC11 Dear MR. DULANEY: This application is on hold until these questions are resolved. Please answer all question(s) together and only respond to [email protected] . Any other method will cause unnecessary delay. DO NOT HIT REPLY! Your response should be sent ONLY to [email protected] . Any additional exhibits that are sent should be UPLOADED at our web site – please do not attach files to your email. Responses should also contain the job number, applicant name and FCC ID of the device. If an acceptable response is not received within 2 weeks the job will be closed & there will be additional charges to reopen. Answer all questions. Be sure to number or identify your answer with the corresponding question. If you are referring to another document, be sure to give the page number and paragraph reference where your response can be found. Based upon our review of this application we have the following questions: 1. TEST SETUP PHOTOS: We did not receive any test setup photos with this filing. Please send them at your earliest convenience. Thank you. 2. 2.1047: states that the audio frequency response must be measured from 100Hz to at least 5000Hz. Please correct this in your test report. 3. MURS Frequencies: The EUT was tested on Frequencies other than MURS frequencies. Please explain why this was done? Also please explain how you will prevent this transmitter from being user on an unauthorized frequency. I have not completed the review of this application; I need the above questions answered. Sincerely, Timco Engineering, Inc.

RQT-152M_ConfidReq.pdf October 25, 2011 Ritron Inc. 505 West Carmel Dr. Carmel, IN 46032 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: AIERIT32-152M Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Schematics Operational Description Semiconductor List Tune-up Procedure RQT-152M_BlkDia.pdf RQT-152M_Schem.pdf RQT-152M_OpDes.pdf RQT-152M_PartsLst.pdf RQT-152M_TunPro.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Sam L. Dulaney Chief Engineer Ritron, Inc.

RQT-152M_ExtPho.pdf TYPE OF EXHIBIT: EXTERNAL PHOTOGRAPHS FCC PART: 2.1033 (c)(12) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 25, 2011 Included in this exhibit are photographs of the RITRON Models RQA-152M and RQT-152M case assemblies. Additional photographs of the radio printed circuit board construction and installation are included with this certification request as separate exhibits. Signed: Michael A. Pickard - Project Engineer RQT-152M_ExtPho.pdf EXHIBIT: RQA-152M front view with no label (front panel label included as separate exhibit) FCC ID: AIERIT32-152M RQT-152M_ExtPho.pdf EXHIBIT: RQT-152M front view with no label (front panel label included as separate exhibit) FCC ID: AIERIT32-152M RQT-152M_ExtPho.pdf EXHIBIT: RQA-152M and RQT-152M back view FCC ID: AIERIT32-152M RQT-152M_ExtPho.pdf RQT-152M RQA-152M EXHIBIT: RQA-152M and RQT-152M front panel instruction labels FCC ID: AIERIT32-152M

RQT-152M_LabelLoc.pdf TYPE OF EXHIBIT: FCC ID LABEL LOCATION FCC PART: 2.1033 MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 25, 2011 Photographs indicate the position of the FCC label on each model’s case. A label drawing is included with this certification request as a separate exhibit. RQA-152M RQT-152M 505 W. Carmel Drive Carmel, IN 46032 USA Phone: 317-846-1201 www.ritron.com Designed and Manufactured in Carmel, Indiana USA Product satisfies General Population requirements for RF exposure. See User Manual for operating instructions. ATTENTION! Model: RQT-152MVHF Transmitter FCC ID: AIERIT32-152M SN: A 1 2 3 4 IC: 1084A-RIT32151 Mfg. Date: 0012

RQT-152M_LabelSmpl.pdf TYPE OF EXHIBIT: FCC ID LABEL SAMPLE FCC PART: 2.1033 MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 25, 2011 Ritron drawing 14200197A specifies the FCC label for models RQA-152M and RQT- 152M. Photographs to indicate the position of the label on each model’s case are included with this certification request as a separate exhibit. Each serial number is recorded, along with the date of manufacture, and is kept on file at RITRON, Inc. Serialization will begin with serial number A1234. The size of the serial label is 3.00” by 0.75”. RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 DRAWN BYCHK’DTRACED SCALEDATEA PP’D MATERIALDRAWIN G N O . RE V . REVISIONS NO. DATE BY 12345 TOLERANCES ( EXCEPT AS NOTED ) DECIMAL ±FRACTIONAL ±ANGULAR ± SERIAL LABEL / FCC ID: AIERIT32-152M MODEL: RQA/RQT-152M MAP 2:1 10/25/11 14200197 A NOTES: 1. The FCC/IC serial label will be made in house per this specification drawing for all models listed in the table at right. 2. A Brady IP300 thermal transfer printer will be used with glossy white polyester labels (RTN# 14290011). Identco Z-TT700 CUSTOM, a 3 inch by 0.75 inch label, is the approved material. The approved thermal transfer ribbon is Brady 4300 Series. 3. Labels will be numbered sequentially, with an init ial 5-digit number of A1234. Records are maintained to track the next available serial number. All models listed share the same serial sequence, and are identical except for model identification. 4. Each label will contain an updated Manufacturing Date using the Ritron 4-digit Date Code (YEAR/MONTH). 0.75” 3.00” 505 W. Carmel Drive Carmel, IN 46032 USA Phone: 317-846-1201 www.ritron.com Designed and Manufactured in Carmel, Indiana USA Product satisfies General Population requirements for RF exposure. See User Manual for operating instructions. A TTENTION! Model: RQT-152M VHF Transmitter FCC ID: AIERIT32-152M SN: A 1 2 3 4 IC: 1084A-RIT32151 Mfg. Date: 0012 A CTUAL SIZE 505 W. Carmel Drive Carmel, IN 46032 USA Phone: 317-846-1201 www.ritron.com Designed and Manufactured in Carmel, Indiana USA Product satisfies General Population requirements for RF exposure. See User Manual for operating instructions. A TTENTION! Model: RQT-152M V HF Transmitte r FCC ID: AIERIT32-152M SN: A 1 2 3 4 IC: 1084A-RIT32151 Mfg. Date: 0012 MODELS: RQA-152M RQT-152M

RQT-152M_IntPho.pdf TYPE OF EXHIBIT: INTERNAL PHOTOGRAPHS FCC PART: 2.1033 (c)(12) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 25, 2011 Included in this exhibit are photographs of the RITRON Models RQA-152M and RQT-152M printed circuit board assembly and installation. Additional photographs of the radio construction and layout, labels, and chassis assembly are included with this certification request as separate exhibits. Signed: Michael A. Pickard - Project Engineer RQT-152M_IntPho.pdf EXHIBIT: RQA-152M complete topside PCB assembly with shield removed FCC ID: AIERIT32-152M RQT-152M_IntPho.pdf EXHIBIT: RQA-152M complete bottom side PCB assembly FCC ID: AIERIT32-152M RQT-152M_IntPho.pdf EXHIBIT: RQA-152M with case open to show printed circuit board installation FCC ID: AIERIT32-152M RQT-152M_IntPho.pdf EXHIBIT: RQT-152M with case open to show printed circuit board installation FCC ID: AIERIT32-152M

RQT-152M_RFExp.pdf TYPE OF EXHIBIT: TRANSMITTER EFFECTIVE RADIATED POWER FCC PART: 1.1310 MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 12, 2011 PROCEDURE: 1. The measurement for effective radiated power was taken at the RITRON, Inc. 3-meter test site, details of which are on file with the FCC. The measurement was via the substitution method. 2. The RQT-152M and RQA-152M were aligned for transmitter operation on 150.025 MHz and 156.025 MHz at the rated 2W transmitter output power. These 2 frequencies represent the lower and upper range of the desired operating band. The RQT-152M was terminated at the antenna port with the Ritron AFB-1545 antenna include with the product. The RQA-152M was terminated at the antenna port with the standard internal antenna include with the product. (The user can connect other antennas, however.) 3. The ERP measurement was made with an Advantest R3265A Spectrum Analyzer and an Electro- Metrics LPA-25 log periodic antenna. 4. The height of the LPA-25 receiving antenna and orientation of the RQT-152M and the RQA-152M were varied to provide maximum field strength at the receiving antenna. 5. A calibrated ½-wave dipole antenna was substituted for the RQT-152M and RQA-152M on the turntable 3 meters from the pick up antenna. An HP 8657B RF signal generator was set at the 2 frequencies representing the lower and upper range of the desired operating band with a -20 dBm output level. 6. The height of the LPA-25 receiving antenna was adjusted for maximum signal strength at the receiving antenna. The level at the field strength antenna was noted. RQT-152M_RFExp.pdf TYPE OF EXHIBIT: TRANSMITTER EFFECTIVE RADIATED POWER FCC PART: 1.1310 MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 12, 2011 CALCULATIONS: The effective radiated power can be calculated as: ERP(dBm) = Pr(dBm) -- Pref(dBm) + Pgen(dBm)) – Ga(dBd) Where: Pr is the power level of the radio’s emission at the receiving antenna output. Pgen is the RF signal generator level at the substitution antenna input. Pref is the power level of the substitution antenna emission at the receiving antenna output. Ga is the gain of the substitution antenna. Maximum radiated power occurred with the RQT-152M and AFB-1545 antenna at 156.025 MHz: ERP(dBm) = 5.13 – (-47.41) + (-21.78) – 0.2 = 30.56 dBm ERP(watts) = antilog((ERP(dBm) – 30)/10) ERP(watts) = 1.14 Watts Frequency Pr Pref Pgen Ga ERP ERP (MHz) (dBm) (dBm) (dBm) (dBd) (dBm) (watts) 150.025 2.94 -47.56 -21.53 0.2 28.77 0.753 156.025 5.13 -47.41 -21.78 0.2 30.56 1.138 Signed: Michael A. Pickard - Project Engineer RQT-152M_RFExp.pdf TYPE OF EXHIBIT: MAXIMUM PERMISSABLE EXPOSURE EVALUATION FCC PART: 2.1091(d)(4) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 12, 2011 PROCEDURE AND EQUATIONS: The ERP values previously calculated will be used to determine the minimum safe distance from the antenna supplied by RITRON in order not to exceed the General Population/Uncontrolled Limits of RF exposure. The ERP must be converted to EIRP to simulate an isotropic radiator. Typical transmit duty cycles are between 5% and 10%. Over the 30 minute averaging period for General Population/Uncontrolled MPE limits, a 50% maximum duty cycle is reasonable, and will be used in the MPE calculations for this device. Since the unit is categorized as a portable radio, a 50% duty cycle may be used, therefore: EIRP = 1.64 (ERP/2) For the RQT-152M w/AFB-1545: EIRP = 0.933 W Power density is related to EIRP: S(W/m 2 ) = EIRP(W)/4πr 2 where r is the distance from the source in meters. Rearranging for distance: r = SQRT (EIRP/4πS). The MPE limit for this device operating in a General Population/Uncontrolled environment is 0.2 mW/ cm 2 For the equation above, mW/cm 2 must be converted to W/m 2 . Since 1 mW/cm 2 = 10 W/m 2 , the FCC limit is 2 W/m 2 . Substituting and solving for distance: Model /Antenna Distance for MPE (in. / cm) RQT-152M/AFB-1545 6.2 / 15.7 With the antenna available from RITRON for use with this product, users must remain more than 6.2 inches (15.7 cm) from the AFB-1545 antenna while the unit is transmitting. For the AFB-1545 antenna, the minimum expected separation of 20 cm (7.9 inches) results in RF exposure levels well below the General Population/Uncontrolled MPE limits. Other antenna may require lesser or greater distances depending upon their gain relative to that available from RITRON. RQT-152M_RFExp.pdf TYPE OF EXHIBIT: RF WARNING STATEMENT FCC PART: 1.1310 MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 12, 2011 WARNING STATEMENT: The following statement appears in the Users Manual: PLEASE NOTE THE FOLLOWING WITH REGARD TO RF EXPOSURE FOR THIS PRODUCT: EXPOSURE TO RADIO FREQUENCY ENERGY: RQA-152M: This product generates radio frequency (RF) energy when the button on the front of the unit is depressed. This product has been evaluated for compliance with the maximum permissible exposure limits for RF energy at the maximum power rating of the unit when using antennas available from RITRON. RQT-152M: This product generates radio frequency (RF) energy when the state of any of the four inputs has been changed. This product has been evaluated for compliance with the maximum permissible exposure limits for RF energy at the maximum power rating of the unit when using antennas available from RITRON. For both the AFB-1545 and the standard internal antennas, at the 20 cm (7.9 inches) minimum expected separation distance and greater, the maximum RF exposure is well below the General Popu…

Text truncated - open the document above for the full version.

RQT-152M_TestRpt.pdf 1 TYPE OF EXHIBIT: TEST REPORT FCC PART: 2.1033 (c)(14) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 25, 2011 The following is a list of attached exhibits required by the Federal Communications Commission for the application to and grant of FCC Type Acceptance. All tests are per TIA-603-D (2010) where applicable. Test Equipment List 2.947 (d) pg 2 Description of Measurement Facility 2.947 (d) pg 3 Radio Frequency Power Output 2.1046 (a) pg 4 Transmitter Audio Overall Response 2.1047 (a) pg 6 Transmitter Audio Lowpass Filter 2.1047 (a) pg 7 Modulation Limiting 2.1047 (b) pg 8 Emissions Designator 2.1049 (c)(1) pg 11 Occupied Bandwidth 2.1049 (c)(1) pg 12 90.210(d) Spurious Emissions at Antenna Terminals 2.1051 pg 15 Field Strength of Spurious Emissions 2.1053 (b) pg 16 Frequency Stability vs. Temperature 2.1055 (a) pg 18 Frequency Stability vs. Voltage 2.1055 (d) pg 19 Transient Frequency Behavior 90.214 pg 20 RQT-152M_TestRpt.pdf 2 TYPE OF EXHIBIT: TEST EQUIPMENT LIST FCC PART: 2.947 (d) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 25, 2011 The measured data in this report was obtained using one or more of the following pieces of equipment. The particular equipment used in any one test is detailed in the procedure for that test. ITEM MANUFACTURER MODEL NO. SERIAL NO. Last Cal EXP Cal Comms Test Set Aeroflex IFR COM-120B 500009331 15 SEP 2010 15 SEP 2011 Signal generator Hewlett-Packard 8657B 3315V04378 19 APR 2011 19 APR 2012 Spectrum Analyzer Advantest R3265A 75060189 21 OCT 2010 21 OCT 2011 Support equipment: ITEM MANUFACTURER MODEL NO. SERIAL NO. Power Supply BK Precision 1630 146-03508 Digital Oscilloscope Philips PM-3335 DM648004 Digital Multimeter Fluke 179 82800086 Dipole Antenna Electro-Metrics EM-6924 241 Dipole Antenna Electro-Metrics BDA-25 8-101 Log Periodic Antenna Electro-Metrics LPA-25 8-102 Gain horn EMCO 3105 Temperature Chamber Associated Laboratories ELH-0.5-LC N/A Thermocouple Omega 7035-J-225 8504 272 MHz high pass filter Ritron 30dB Power Attenuator Bird 8306-300-N N/A 10dB Attenuator ELCOM AT-51-10 N/A Signed: Michael A. Pickard - Project Engineer RQT-152M_TestRpt.pdf 3 TYPE OF EXHIBIT: DESCRIPTION OF MEASUREMENT FACILITY FCC PART: 2.947(d) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 25, 2011 The ERP and field strength of spurious emissions measurements filed with this application were made on a site certified by RITRON, Inc. Data pertaining to this site are on file with the FCC and Industry Canada. This site is used on a continuing basis exclusively by RITRON, Inc. and is utilized only for RF field strength measurements of equipment designed and manufactured by RITRON, Inc. It is not used for measurements by, or for, any other party on a contract basis or otherwise. All other measurements were taken at RITRON’s engineering laboratory in Carmel, IN. Signed: Michael A. Pickard - Project Engineer Ritron Test Site RQT-152M_TestRpt.pdf 4 TYPE OF EXHIBIT: RADIO FREQUENCY POWER OUTPUT FCC PART: 2.1046(a) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQA-152M, RQT-152M TYPE OF UNIT: VHF-FM Voice Message Transmitter FCC ID: AIERIT32-152M DATE: October 17, 2011 PROCEDURE: 1. The RQT-152M was aligned for transmitter operation at 2W power level per the tune-up procedure for frequencies representing the lower and upper range of the desired operating band. 2. Power was supplied to the RQT-152M at the EXTERNAL POWER input by a BK Precision 1630 power supply set to 10 and 13.5 volts to represent the specified input voltage range. 3. The RQT-152M was connected to an IFR COM-120A Test Set used to measure the RF carrier power. The input to the Test Set provides a resistive 50-ohm termination at the frequencies and power levels used for this test. 4. A Fluke 179 multimeter was used to measure the I TX transmitter current that supplies the driver and final RF amplifier stages. 5. Measurements were taken at the lower and upper band edge frequencies. 6. Power was suppl…

Text truncated - open the document above for the full version.