AIERIT32-433-RCVR433.92MHz KEYFOB RECEIVER

RQT-433-RCVR_UserMan_2.pdf TYPE OF EXHIBIT: INSTALLATION AND OPERATING INSTRUCTION MANUAL FCC PART: 2.1033 (b)(3) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR DATE: January 24, 2012 Included in this exhibit is a draft copy of the User Manual for RITRON Model RQT-433-RCVR 433 MHz Keyfob Receiver. This manual provides the end user with installation and operating instructions. Signed: Michael A. Pickard - Project Engineer For assistance, call RITRON at 800-872-1872, or go to www.ritron.com 1 RQT-433-RCVR 433.92 MHz Keyfob Receiver Owner’s Manual Call 800-USA-1-USA for the right Wireless Solutions to your communication needs. Ritron, Inc. P.O. Box 1998 • Carmel, Indiana 46082-1998 • USA Phone: 317-846-1201; 800-USA-1-USA (800-872-1872) Fax: 317-846-4978 Email: [email protected] Ritron Publication 145000082 Rev. A 01-12 © 2011 Ritron, Inc. All rights reserved. Ritron, Patriot, Jobcom, OutPost, GateGuard, Quiet Call and Quick Assist are registered trademarks of Ritron, Inc. Quick Talk, Liberty and RadioNexus are trademarks of Ritron, Inc. For assistance, call RITRON at 800-872-1872, or go to www.ritron.com 2 Table of Content RQT Models and Keyfobs ............................................. 2 RQT-433-RCVR FCC Part 15 Statement ..................... 2 General Information ...................................................... 3 RQT Radio Operation ................................................... 3 Effect on RQT Radio Battery Life.................................. 3 RQT-KEYFOB Operation .............................................. 4 RQT-KEYFOB Battery Replacement ............................ 4 RQT-KEYFOB FCC Part 15 Instructions ...................... 5 RQT Radio Programming.............................................. 6 Programmable RQT Radio Attributes ........................... 7 Changing the Address................................................... 8 Specifications ................................................................ 9 RQT Models and Keyfobs Ritron RQT Models with the RQT-433-RCVR installed: RQT-151-RCVR RQT-151M-RCVR RQT-451-RCVR RQT-152-RCVR RQT-152M-RCVR RQT-452-RCVR Ritron Keyfob Transmitters: RQT-KEYFOB-1 RQT-KEYFOB-2 RQT-KEYFOB-3 RQT-KEYFOB-4 RQT-KEYFOB-5 RQT-KEYFOB-6 RQT-KEYFOB-7 RQT-KEYFOB-8 RQT-433-RCVR FCC Part 15 Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. You can test that if this equipment does cause harmful interference to radio or television reception by turning the equipment off and on. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. For assistance, call RITRON at 800-872-1872, or go to www.ritron.com 3 General Information The RQT-433-RCVR is a 433.92 MHz keyfob receiver designed for use with the Ritron RQT Series transmitter. When installed, the RQT-433-RCVR allows the user to activate RQT pre-recorded messages by pressing a small keyfob transmitter. Ritron model keyfobs are pre- set to activate 1 of 8 RQT messages. Simply record your desired voice message into the RQT Series transmitter using the RQT PC Programmer and you are ready to go. RQT Radio Operation For RQT models with an RQT-433-RCVR installed, any of the 4 RQT inputs can be programmed for “KEYFOB” operation. This will allow that input to operate on 2 pre- assigned Ritron keyfobs per the following chart: Input Models Input 1 RQT-KEYFOB-1 RQT-KEYFOB-2 Input 2 RQT-KEYFOB-3 RQT-KEYFOB-4 Input 3 RQT-KEYFOB-5 RQT-KEYFOB-6 Input 4 RQT-KEYFOB-7 RQT-KEYFOB-8 Once an RQT input is set for “KEYFOB” operation it will no longer respond to switch closures or analog signals, the two Input messages can only be activated by the specific received keyfob codes assigned to that input. Refer to the RQT Programming section of this manual for details of KEYFOB input programming and the associated programming options available. Once the radio has been programmed and installed, Ritron model keyfobs can be used to activate the RQT transmitter and broadcast a unique, user recorded voice message associated with the specific keyfob. EXAMPLE: RQT Input 1 is set for “KEYFOB” operation with “Assistance needed in classroom 111” recorded for RQT-KEYFOB-1 and “Assistance needed in classroom 112” recorded for RQT-KEYFOB-2. Ritron keyfobs RQT-KEYFOB-1 and RQT-KEYFOB-2 can now activate these two recorded messages respectively. Effect on RQT Radio Battery Life In order for the RQT-433-RCVR receiver to reliably decode signals from the keyfob transmitters, RQT radio models with the RQT-433-RCVR keyfob receiver installed have increased current requirements and do not operate in the low current “standby” mode. Therefore, battery life is severely reduced and it is recommended that the RQT be externally powered. Where battery life of an RQT radio would normally be about 1 year, it drops to about 2 weeks with the RQT- 433-RCVR installed. For assistance, call RITRON at 800-872-1872, or go to www.ritron.com 4 RQT-KEYFOB Operation When operating a keyfob transmitter the best performance is achieved with the keyfob held between the thumb and forefinger, with the …

Text truncated - open the document above for the full version.

Ritron, Inc. 505 W. Carmel Drive • Carmel, IN 46032-7564 P.O. Box 1998 • Carmel, IN 46082-1998 Ph: 317-846-1201 Fax: 317-846-4978 Email: [email protected] Web Site: www.ritron.com RQT-433-RCVR_ConfidReq.pdf January 18, 2012 Ritron Inc. 505 West Carmel Dr. Carmel, IN 46032 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of: FCC ID: AIERIT32-433-RCVR Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Schematics Operational Description Semiconductor List Tune-up Procedure RQT-433-RCVR_BlkDia.pdf RQT-433-RCVR_Schem.pdf RQT-433-RCVR_OpDes.pdf RQT-433-RCVR_PartsLst.pdf RQT-433-RCVR_TunPro.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Sam L. Dulaney Chief Engineer Ritron, Inc.

Ritron, Inc. 505 W. Carmel Drive • Carmel, IN 46032-7564 P.O. Box 1998 • Carmel, IN 46082-1998 Ph: 317-846-1201 Fax: 317-846-4978 Email: [email protected] Web Site: www.ritron.com January 30, 2012 Ritron Inc. 505 West Carmel Dr. Carmel, IN 46032 Timco Engineering Inc. 849 NW State Road 45 Newberry, Florida 32669 REFERENCE: JOB 157UC12 Dear Sir/Madam: Ritron, Inc. will offer the following Part 90 and Part 95J models with Part 15B receiver AIERIT32-433-RCVR installed . Should Ritron desire installation in other products, tests will be conducted to assure compliance per FCC Part 2.1043(b)(1) Class I permissive change. The Part 15B receiver AIERIT32-433-RCVR will not be offered for retrofit into products already deployed in the field. Model TX FCC ID RQT-151-RCVR AIERIT32-151 RQT-151M-RCVR AIERIT32-151M RQT-152-RCVR AIERIT32-152 RQT-152M-RCVR AIERIT32-152M RQT-451-RCVR AIERIT32-451 RQT-452-RCVR AIERIT32-452 Sincerely, Michael A. Pickard Project Engineer Ritron, Inc.

RQT-433-RCVR_ExtPho.pdf TYPE OF EXHIBIT: EXTERNAL PHOTOGRAPHS FCC PART: 2.1033 (b)(7) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR DATE: January 18, 2012 The RQT-433-RCVR is a 433.92 MHz keyfob receiver that is used with other Ritron products. As such, it does not have an independent enclosure but is installed within companion products. Included in this exhibit are photographs of the RITRON Model RQT-451 case assemblies, one of the Ritron products it will be used with. Additional photographs of the RQT-433-RCVR printed circuit board construction and installation within the RQT-451 are included with this certification request as separate exhibits. Signed: Michael A. Pickard - Project Engineer RQT-433-RCVR_ExtPho.pdf EXHIBIT: RQT-451 front view FCC ID: AIERIT32-451 with AIERIT32-433-RCVR installed within RQT-433-RCVR_ExtPho.pdf EXHIBIT: RQT-451 back view FCC ID: AIERIT32-451 with AIERIT32-433-RCVR installed within

RQT-433-RCVR_LabelLoc_2.pdf TYPE OF EXHIBIT: FCC ID LABEL LOCATION FCC PART: 2.1033 (b)(7) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR DATE: January 30, 2012 Photographs indicate the location of the FCC ID labels for the RQT-433-RCVR. Label drawings are included with this certification request as a separate exhibit. Signed: Michael A. Pickard - Project Engineer FCC ID: AIERIT32-433- FCC ID: AIERIT32-433-RCVR FCC ID Label FCC ID Label 505 W. Carmel Drive Carmel, IN 46032 USA Phone: 317-846-1201 www.ritron.com Designed and Manufactured in Carmel, Indiana USA Product satisfies General Population requirements for RF exposure. See User Manual for operating instructions. ATTENTION! Model: RQT-451-RCVR UHF Transmitter TX FCC ID: AIERIT32-451 SN: A 1 2 3 4 RX FCC ID: AIERIT32-433-RCVR Mfg. Date: 1101

RQT-433-RCVR_LabelSmpl_2.pdf TYPE OF EXHIBIT: FCC ID Label FCC PART: 2.1033(b)(7), 15.19(a)(3),(5) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR DATE: January 30, 2012 In accordance with CFR 47 Part 2.1033(b)(7) and Part 15.19(a)(5), a small label will be placed on the RQT-433-RCVR per the following drawing. This white poly label is 0.25” x 0.75” with graphics indelibly printed. FCC LABEL DRAWING Additionally, per FCC Part 2.925(b)(1), a label drawing is submitted with the TX FCC ID and RX FCC ID shown for all Ritron models with the RQX-433-RCVR Part 15 receiver installed. Photographs indicating label locations are submitted as a separate exhibit. Signed: Michael A. Pickard - Project Engineer FCC ID: AIERIT32-433-RCVR RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 DRAWN BYCHK’DTRACED SCALEDATEA PP’D M A TERIAL DRAWIN G N O . REV. REVISIONS NO. DATE BY 12345 TOLERANCES ( EXCEPT AS NOTED ) DECIMAL ±FRACTIONAL ±ANGULAR ± SERIAL LABEL / FCC ID: AIERIT32-433-RCVR MAP 2:1 01/30/12 14200198 A NOTES: 1. The FCC serial label will be made in house per this specification drawing for all m odels listed in the table at right. 2. A Brady IP300 thermal transfer printer will be used with glossy white polyester labels (RTN# 14290011). Identco Z-TT700 CUSTOM, a 3 inch by 0.75 inch label, is the approved material. The approved thermal transfer ribbon is Brady 4300 Series. 3. Labels will be numbered sequentially, with an initial 5- digit number of A1234. Records are maintained to track the next available serial number. All models listed share the same serial sequence, and are identical except for model identification. 4. Each label will contain an updated Manufacturing Date using the Ritron 4-digit Da te Code (YEAR/MONTH). 0.75” 3.00” 505 W. Carmel Drive Carmel, IN 46032 USA Phone: 317-846-1201 www.ritron.com Designed and Manufactured in Carmel, Indiana USA Product satisfies General Population requirements for RF exposure. See User Manual for operating instructions. A TTENTION! Model: RQT-451-RCVR UHF Transmitter TX FCC ID: AIERIT32-451 SN: A 1 2 3 4 RX FCC ID: AIERIT32-433-RCVR Mfg. Date: 1101 A CTUAL SIZE 505 W. Carmel Drive Carmel, IN 46032 USA Phone: 317-846-1201 www.ritron.com Designed and Manufactured in Carmel, Indiana USA Product satisfies General Population requirements for RF exposure. See User Manual for operating instructions. A TTENTION! Model: RQT-451-RCVR UHF Transmitter TX FCC ID: AIERIT32-451 SN: A 1 2 3 4 RX FCC ID: AIERIT32-433-RCVR Mfg. Date: 1101 Model Description TX FCC ID RX FCC ID RQT-151-RCVR VHF Transmitter AIERIT32-151 AIERIT32-433-RCVR RQT-151M-RCVR VHF Transmitter AIERIT32-151M AIERIT32-433-RCVR RQT-152-RCVR VHF Transmitter AIERIT32-152 AIERIT32-433-RCVR RQT-152M-RCVR VHF Transmitter AIERIT32-152M AIERIT32-433-RCVR RQT-451-RCVR UHF Transmitter AIERIT32-451 AIERIT32-433-RCVR RQT-452-RCVR UHF Transmitter AIERIT32-452 AIERIT32-433-RCVR

RQT-433-RCVR_PT15Label_2.pdf TYPE OF EXHIBIT: Part 15 Label FCC PART: 15.19(a)(3) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR DATE: January 30, 2012 Pursuant to CFR 47 Part 15.19(a)(3) a label with the following Part 15 warning statement will be placed on the RQT model enclosure in which the Part 15B receiver is installed. This statement will also be included in the product instruction manual. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Signed: Michael A. Pickard - Project Engineer Location of Part 15 Warning Label

RQT-433-RCVR_IntPho.pdf TYPE OF EXHIBIT: INTERNAL PHOTOGRAPHS FCC PART: 2.1033 (b)(7) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR DATE: January 18, 2012 Included in this exhibit are photographs of the RITRON Model RQT-433-RCVR printed circuit board assembly and installation within Ritron Model RQT-451, one of the Ritron products it is intended to be used with. Additional photographs of the radio construction and layout, labels, and chassis assembly are included with this certification request as separate exhibits. Signed: Michael A. Pickard - Project Engineer RQT-433-RCVR_IntPho.pdf EXHIBIT: RQT-433-RCVR complete topside PCB assembly FCC ID: AIERIT32-433-RCVR RQT-433-RCVR_IntPho.pdf EXHIBIT: RQA-433-RCVR complete bottomside PCB assembly FCC ID: AIERIT32-433-RCVR RQT-433-RCVR_IntPho.pdf EXHIBIT: RQT-433-RCVR installed in Ritron Model RQT-451 with case open to show installation FCC ID: AIERIT32-433-RCVR

RQT-433-RCVR_TestRpt_2.pdf 1 TYPE OF EXHIBIT: TEST REPORT FCC PART: 2.1033 (b)(6) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR DATE: January 24, 2012 The following is a list of attached exhibits required by the Federal Communications Commission for the application to and grant of FCC Part 15 Certification. All tests are per ANSI C63.4-2003 where applicable. Test Equipment List 2.947 (d) Description of Measurement Facility 2.948 (a)(2) Radiated Spurious Emissions 15.31(a)(3), 15.33(b)(3), 15.109(a) Radiated Spurious Emissions Test Setup Photo 15.31(a)(3), 15.33(b)(3), 15.109(a) RQT-433-RCVR_TestRpt_2.pdf 2 TYPE OF EXHIBIT: TEST EQUIPMENT LIST FCC PART: 2.947 (d) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR DATE: January 24, 2012 The measured data in this report was obtained using one or more of the following pieces of equipment. The particular equipment used in any one test is detailed in the procedure for that test. ITEM MANUFACTURER MODEL NO. SERIAL NO. Last Cal EXP Cal Spectrum Analyzer Advantest R3265A 75060189 21 OCT 2010 21 OCT 2011 Log Periodic Antenna Electro-Metrics LPA-25 8-102 17 MAY 2011 17 MAY 2013 Confirmation Support equipment: ITEM MANUFACTURER MODEL NO. SERIAL NO. Digital Multimeter Fluke 179 82800086 Signed: Michael A. Pickard - Project Engineer RQT-433-RCVR_TestRpt_2.pdf 3 TYPE OF EXHIBIT: DESCRIPTION OF MEASUREMENT FACILITY FCC PART: 2.948(a)(2) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR DATE: January 24, 2012 The receiver spurious emissions measurements filed with this application were made on a site certified by RITRON, Inc. Data pertaining to this site is on file with the FCC and Industry Canada. Firm Registration Number: 536261 Firm FRN: 0004-3348-76 FCC Reference: ANSI STD C63.4-2003 Industry Canada Radio Standard: Procedure 212 This site is used on a continuing basis exclusively by RITRON, Inc. and is utilized only for RF field strength measurements of equipment designed and manufactured by RITRON, Inc. It is not used for measurements by, or for, any other party on a contract basis or otherwise. All other measurements are taken at RITRON’s engineering laboratory in Carmel, IN. Signed: Michael A. Pickard - Project Engineer Ritron Test Site RQT-433-RCVR_TestRpt_2.pdf 4 TYPE OF TEST: RADIATED SPURIOUS EMISSIONS FCC PART: 15.31(a)(3), 15.33(b)(3), 15.109(a) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR DATE: October 5, 2011 PROCEDURE: The RQT-433-RCVR is a fixed tuned, 433.92 MHz keyfob receiver with a 1 st LO output of 423.22 MHz (RX – 10.7 MHz). There are no provisions to operate at any other frequency. 1. Field strength of spurious radiation of the RQT-433-RCVR was measured at the RITRON, Inc. 3- meter test site, details of which are on file with the FCC. Measurements were per ANSI C63.4-2003 Part 8.3. 2. The RQT-433-RCVR was installed in a host unit Ritron Model RQT-452, which supplied +9VDC to the EUT. This is the normal condition of installation and operation. There was no power applied to the radio frequency circuits of the host unit during the testing, it was used only to pass supply voltage to the EUT. 3. The RQT-433-RCVR was equipped with the non-removable, 433MHz, helical wound antenna include with the product. The RQT-433-RCVR has no provisions for any other antenna. 4. All field strength measurements were made with the Advantest R3265A Spectrum Analyzer connected to the Electro-Metrics LPA-25 log periodic antenna. 5. For each emission, the height and polarization of the field strength measuring antenna and orientation of the RQT-433-RCVR were varied to find maximum field strength. 6. The spectrum was searched from 30MHz – 846.44MHz (1 st LO x 2) per FCC Part 15.33(b)(3). 7. Analyzer readings in dBm and the calibrated antenna factor were converted to field strength in dBμV/m as follows. E(dBμV/m) = Rspur(dBm) + 107(dB) + AF(dB) where: Rspur is the measured spur in dBm at 3 meters AF is the calibrated antenna factor in dB The results were converted to μV/m as follows and compared to the FCC limit of 200 μV/m. E(μV/m) = 10^( E(dBμV/m) / 20) 8. Testing was repeated with the RQT-433-RCVR removed from the host Ritron Model RQT-452 and powered independently at +9VDC by 6 AA alkaline batteries. Test results were confirmed. RESULT: From 3 meters, no spurious radiation was detected at any height, polarization, or orientation. As a result, the -100dBm noise floor level of the spectrum analyzer is used in all calculations to confirm compliance. As indicated by the accompanying data, spurious radiation is well below the 200 μV/m FCC limit per Part 15.109(a). RQT-433-RCVR_TestRpt_2.pdf 5 TYPE OF TEST: RADIATED SPURIOUS EMISSIONS FCC PART: 15.31(a)(3), 15.33(b)(3), 15.109(a) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR DATE: October 5, 2011 DATA: Horizontal Multiple Emission Rspur Antenna Rspur FCC of Frequency Reading Factor Level limit 1 st LO MHz dBm dB E(μV/m) E(μV/m) 1 423.22 -100.0 20.9 24.83 200 2 846.44 -100.0 27.5 53.09 200 Vertical Multiple Emission Rspur Rspur Rspur FCC of Frequency Reading ERP Level limit 1 st LO MHz dBm dBm E(μV/m) E(μV/m) 1 423.22 -100.0 20.9 24.83 200 2 846.44 -100.0 27.5 53.09 200 Signed: Michael A. Pickard - Project Engineer RQT-433-RCVR_TestRpt_2.pdf 6 TYPE OF TEST: RADIATED SPURIOUS EMISSIONS FCC PART: 15.31(a)(3), 15.33(b)(3), 15.109(a) MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR RQT-433-RCVR Radiated Spurious Emissions Test Setup Photos

RQT-433-RCVR_TSup_2.pdf TYPE OF EXHIBIT: DESCRIPTION OF MEASUREMENT FACILITY FCC PART: 2.948(a)(2) MANUFACTURER: RITRON, INC. 505 West Carmel Drive Carmel, IN 46032 MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR DATE: January 24, 2012 The receiver spurious emissions measurements filed with this application were made on a site certified by RITRON, Inc. Data pertaining to this site is on file with the FCC and Industry Canada. Firm Registration Number: 536261 Firm FRN: 0004-3348-76 FCC Reference: ANSI STD C63.4-2003 Industry Canada Radio Standard: Procedure 212 This site is used on a continuing basis exclusively by RITRON, Inc. and is utilized only for RF field strength measurements of equipment designed and manufactured by RITRON, Inc. It is not used for measurements by, or for, any other party on a contract basis or otherwise. All other measurements are taken at RITRON’s engineering laboratory in Carmel, IN. Signed: Michael A. Pickard - Project Engineer Ritron Test Site RQT-433-RCVR_TSup_2.pdf TYPE OF TEST: RADIATED SPURIOUS EMISSIONS FCC PART: 15.31(a)(3), 15.33(b)(3), 15.109(a) MODELS: RQT-433-RCVR TYPE OF UNIT: 433.92 MHz Keyfob Receiver FCC ID: AIERIT32-433-RCVR RQT-433-RCVR Radiated Spurious Emissions Test Setup Photos