APB55647-02A4RToy Receiver

INSTRUCTION SHEET SPECIFICATIONS Toy: Toy No.: Part No.: Trim Size: Folded Size: Type of Fold: # colors: Colors: Paper Stock: Paper Weight: EDM No.: Zip 'n Zoom Shann 49MHz 55647 0920 G1 16.5" W x 8.5" H 5.5" W x 8.5" H 3-Panel One Black White Offset 70 lb. ™ 55647-0920 G1 This product is not recommended for use on loose dirt or rough, bumpy or wet surfaces. Do not immerse in water. Keep these instructions for future reference as they contain important information. © 2002 Mattel, Inc., El Segundo, CA 90245 U.S.A. All Rights Reserved. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline 01628500303. Mattel Australia Pty., Ltd., Richmond, Victoria. 3121.Consumer Advisory Service - 1300 135 312. Mattel East Asia Ltd, World Finance Centre, Harbour City, Tsimshatsui, HK, China. CONTENTS: Instructions Ages 6+ 49MHz BATTERY SAFETY INFORMATION: 1. Non-rechargeable batteries are not to be recharged. 2. Rechargeable batteries are to be removed from the toy before being charged. 3. Rechargeable batteries are only to be charged under adult supervision. 4. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. 5. Do not mix old and new batteries 6. Only batteries of the same or equivalent type as recommended are to be used. 7. Batteries are to be inserted with the correct polarity. 8. Exhausted batteries are to be removed from the toy. 9. The supply terminals are not to be short-circuited. 10. Dispose of batteries safely. 11. Do not dispose of in fire as batteries may explode or leak. 12. Products with non-replaceable batteries are not to be disposed of in a fire as the batteries inside may explode or leak. 1. 2. BENT OR DIRTY CONTACTS MAY RESULT IN LOSS OF POWER. GENTLY BEND BACK METAL CONTACT IF BATTERY DOES NOT FIT CORRECTLY. Install Batteries 1.Controller requires 1 “9-Volt” alkaline battery (not included). 2.Scooter requires 4 “AA” alkaline batteries (not included). Unscrew battery compartment door with Phillips head screwdriver (not included), and lift off. Insert batteries and replace door. Get Ready! Remove twist ties under scooter. Apply stickers to scooter wherever you like! ON / OFF SWITCH Attach Doll to Scooter If doll detaches from scooter, reattach as shown. Your Scooter Moves 2 Ways! ROTATE 360° Pull joystick backwards to rotate scooter counter-clockwise. 2. 1. FORWARD To set toy in motion, push joystick forward. FIRST, turn switch (under scooter) to "I" position (ON). ALWAYS switch to "O" position (OFF) when finished playing. OFF ON QUICK TIPS 1. When the scooter does not respond, slows down, or loses range, change the batteries. Your vehicle’s running time may change depending on your driving style. 2. Radio interference can make your vehicle run badly. Interference can be caused by other R/C vehicles running on the same frequency; electrical wires; large buildings; or CB radios. Try to stay away from these! 3. Operating multiple vehicles with the same frequency in close proximity will cause interference and poor performance. Zip ’n Zoom Shannen™ Doll is available in 2 different frequencies. Each sold separately and subject to availability. Use 2 different frequencies (27 MHz and 49 MHz) for racing 2 scooters. 4. Point your transmitter up – not down toward your vehicle. If your vehicle gets too far away, it won’t work properly. 5. Don’t drive your vehicle in sand, over bumpy/rough surfaces, or through water or snow. If your vehicle does get wet, wipe with a towel and allow to dry completely. 6. Always turn switches OFF and remove all batteries for storage. 7. If transmitter is accidentally dropped in the water, remove batteries and allow transmitter to air dry. Replace with fresh batteries before operation. ON/OFF • Switch to "O" position (OFF) when finished with play. • Switch to "I" position (ON) to resume play. SAFETY PRECAUTIONS Adults, this toy is recommended for children 6 years of age and older. To ensure that the child’s play is both safe and fun, please review the operating instructions and these general rules with the child. ! CAUTION: To prevent entanglement, keep hair away from wheels. • DO NOT pick up vehicle while in motion. • Keep fingers, hair and loose clothing away from the tires and the wheel hubs while the vehicle is switched ON. • Adult supervision is recommended during operation of this vehicle. • To avoid accidental operation, remove batteries when not in use. • Play safely! DO NOT operate your scooter in the streets! COMPLIANCE WITH FCC REGULATIONS THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Consult the dealer or an experienced radio/TV technician for help. Mattel Inc., 333 Continental Blvd., El Segundo, CA, (310) 252-2400 CAUTION: Changes or modifications not expressively approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. Radio-controlled toy from …

Text truncated - open the document above for the full version.

MOTOR BLOCK-DIAGRAMRECEIVER RX PCB 55647RXA & 55647RXB SUPERREGENERATIVECIRCUIT REGULATOR VOLTAGE RIPPLE FILTER VI2 VO1 VI1 VDD TURBO FORWARD BACKWARD LDB VO2 GND S1 OSC1 OSC0 RIGHT LEFT ROB CONTROL LOGIC DRIVE CIRCUIT BATTERY 4 X AA + _ AMP RX2C COUNTER PLA LATCH OSCILLATORLIMINGGENERATORDECODINGCIRCUIT M MOTOR

PROPOSED FCC ID LABEL AND LOCATION MATTEL INC. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: APB55647-02A4R FCC ID LABEL

Model # 55647 Mini Shannen Skateboard RECEIVER OPERATIONAL DESCRIPTION. The receiver is used with an RF controlled toy. The RF signal, modulated by amplitude, comes from a permanently attached antenna through C1 to the input of superregenerative detector, built on the base of transistor Q1 and passive components L1, L2, C2-C6, R1, R2. The detected control signal comes to the input of decoder U1 RX2C. Passive components C7-C10, R5-R9 and R17 support functionality of decoder. R17 sets decoder internal system clock. DC outputs of decoder are connected trough R11 and R12 to the bi-directional motor driver. The motor driver is formed by transistors Q8-Q13 and resistors R13-R16. Capacitors C14-C15 are intended for reducing commutation electrical noise of motor. The circuit is powered by 4 “AA” batteries trough ON/OFF switch. Transistor Q14, Zener diode ZD, capacitors C11-C13 and resistor R3 provide stable power voltage for RF detector and decoder.

1 2 3 4 ABCD 4 3 2 1 D CBA Title Number Revision Size A4 Date: 7-Mar-2002 Sheet of File: \\Kpe01\c\LMH\50439\55647RX-1.sch Drawn By: R17 220K R7 2.2K R6 2.2M R92.2K C9 0.1uF C8 120P R8 2.2M R5 2.2K R4 4.3K C7 0.1uF C5 0.01uF C2 6PF L1 0.5X7.5T C14P R1 100K C4 4.7uF C6 27PF L2 3.3uH R2 910 C3 MYLAR 2200PF ANTENNA C12 100uF ZD 3.3V R10 330 C13 100uF R16 47 6.0V R15 47 M2 Q1 C380 O Q13 C1815Y/GR Q12 2SD882 Q8 C1815Y/GR Q11 2SD882 Q14 A1015GR Q10 2SB772 Q92SB772 00 11 C101000PF VCC C15 0.1u C16 0.1u C140.1u VO2 1 GND 2 SI 3 OSCI 4 OSCO 5 R 6 L 7 RDB 8 LDB 9 B 10 F 11 TURBO 12 VDD 13 VI1 14 VO1 15 VI2 16 U1 RX2C R11820 R12820 C11 0.047UF ON OFF VCC R34.3k R134.3K R144.3K (US 49M)

ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT CERTIFICATION TO FCC PART 15 REQUIREMENTS for UNINTENTIONAL RADIATOR RF REMOTE CONTROLLED TOY MODEL NO: 55647, 55648, 55649, 56508 BRAND NAME: VESPA SCOOTER SHANNEN AND ZIP ‘N ZOOM SHANNEN FCC ID NO: APB55647-02A4R REPORT NO: 02U1223-1 DATE: MARCH 26, 2002 Prepared for MATTEL INC. 2031 MARIPOSA AVENUE EL SEGUNDO, CA 90245 USA Prepared by COMPLIANCE CERTIFICATION SERVICES 561 F MONTEREY ROAD MORGAN HILL, CA 95037, USA TEL: (408) 463-0885 FAX: (408) 463-0888 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE...........................................................................................3 2. PRODUCT DESCRIPTION..............................................................................................................4 3. TEST FACILITY..................................................................................................................................4 4. MEASUREMENT EQUIPMENT USED......................................................................................5 5. TEST CONFIGURATION.................................................................................................................5 6. TESTS CONDUCTED........................................................................................................................5 7. RADIATED EMISSION TEST PROCEDURE..........................................................................6 8. COHERENT TESTS............................................................................................................................6 9. EQUIPMENT MODIFICATIONS..................................................................................................7 10. TEST CONFIGURATION PHOTOS (RADIATED EMISSION TEST)...........................8 • TEST DATA o Coherent Emission Plot o Radiated Emission Data • PROPOSED FCC ID LABEL FORMAT • AUTHORIZATION LETTER • SCHEMATIC DIAGRAM • USER MANUAL • EUT PHOTOGRAPHS REPORT NO: 02U1223-1 FCC ID: APB55647-02A4R DATE: MARCH 26, 2002 EUT: RF REMOTE CONTROLLED TOY Page 3 of 13 COMPLIANCE CERTIFICATION SERVICES CCS DOCUMENT NO: CCSUP4021B 561 F MONTEREY, MORGAN HILL CA 95037 TEL:(408)463-0885 FAX:(408)463-0885 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 1. VERIFICATION OF COMPLIANCE COMPANY NAME : MATTEL INC. 2031 MARIPOSA AVENUE EL SEGUNDO, CA 90245 USA CONTACT PERSON : VLADIMIR SOSNOVSKY, PROJECT ENGINEER TELEPHONE NO. : 310-252-5595 EUT DESCRIPTION : RF REMOTE CONTROLLED CAR MODEL NAME/NUMBER : 55647, 55648, 55649, 56508 BRAND NAME : VESPA SCOOTER SHANNEN AND ZIP ‘N ZOOM SHANNEN FCC ID : APB55647-02A4R DATE TESTED : MARCH 25, 2002 REPORT NUMBER : 02U1223-1 TYPE OF EQUIPMENT REMOTE CONTROL TOY RECEIVER (UNINTENTIONAL RADIATOR) EQUIPMENT TYPE 49 MHz SUPERREGENERATE RECEIVER MEASUREMENT PROCEDURE ANSI 63.4 / 1992 LIMIT TYPE CERTIFICATION FCC RULE CFR 47, PART 15 SUBPART B The above equipment was tested by Compliance Engineering Services, Inc. for compliance with the requirements set forth in CFR 47, PART 15 SUBPART B. This said equipment in the configuration described in this report shows that maximum emission levels emanating from equipment are within the compliance requirements. Warning: This document reports conditions under which testing was conducted and results of tests performed. This document may not be altered or revised in any way unless done so by Compliance Certification Services and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by Compliance Certification will constitute fraud and shall nullify the document. Tested By: Approved & Released For CCS By: JERRY HOVEY MIKE HECKROTTE EMC ENGINEER CHIEF EMC ENGINNER COMPLIANCE CERTIFICATION SERVICES COMPLIANCE CERTIFICATION SERVICES REPORT NO: 02U1223-1 FCC ID: APB55647-02A4R DATE: MARCH 26, 2002 EUT: RF REMOTE CONTROLLED TOY Page 4 of 13 COMPLIANCE CERTIFICATION SERVICES CCS DOCUMENT NO: CCSUP4021B 561 F MONTEREY, MORGAN HILL CA 95037 TEL:(408)463-0885 FAX:(408)463-0885 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 2. PRODUCT DESCRIPTION MATTEL INC., Model No# 55647 RF REMOTE CONTROLLED TOY is the receiving portion of a remote control toy. The associated Transmitter is manufactured by MATTEL INC., Model No# 55647, FCC ID APB55647-02A4T. 3. TEST FACILITY The 3 meter open area test site and conducted measurement facility used to collect the radiated data is located at 561F Monterey Road, Morgan Hill, California, U.S.A. A detailed description of the test facilities was submitted to the Commission on May 27, 1994. The measuring instrument, which was utilized in performing the tests documented herein, has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipment, which is traceable to recognized national standards. REPORT NO: 02U1223-1 FCC ID: APB55647-02A4R DATE: MARCH 26, 2002 EUT: RF REMOTE CONTROLLED TOY Page 5 of 13 COMPLIANCE CERTIFICATION SERVICES CCS DOCUMENT NO: CCSUP4021B 561 F MONTEREY, MORGAN HILL CA 95037 TEL:(408)463-0885 FAX:(408)463-0885 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 4. MEASUREMENT EQUIPMENT USED 5. TEST CONFIGURATION Set signal generator to transmit at 49 MHz. Adjusted generator level and frequency to get the maximum coherent and emission of the Eut. The receiver receives the signal. All the wires are placed on the turntable to their maximum length to simulate the worse emissio…

Text truncated - open the document above for the full version.

REPORT NO: 02U1223-1 FCC ID: APB55647-02A4R DATE: MARCH 26, 2002 EUT: RF REMOTE CONTROLLED TOY Page 8 of 13 COMPLIANCE CERTIFICATION SERVICES CCS DOCUMENT NO: CCSUP4021B 561 F MONTEREY, MORGAN HILL CA 95037 TEL:(408)463-0885 FAX:(408)463-0885 This report shall not be reproduced except in full, without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 10. TEST CONFIGURATION PHOTOS (Radiated Emission Test)