APB92019-00A4R49MHZ TOY CAR RECEIVER

PROPOSED FCC ID LABEL AND LOCATION MATTEL, INC. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: APB92019-00A4R FCC ID LABEL

Operational Description Speed Wrench is a radio control toy car receiver. It can only be operated with Speed Wrench transmitter. Toy car receiver is operating at 49MHz frequency. The receiving range can be up to 20 meters. It is equipped with 4 off-road monster wheels or 4 racing speedwheels. It is powered by 8V DC.

ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT CERTIFICATION TO FCC PART 15 REQUIREMENTS for UNINTENTIONAL RADIATOR 49MHz RC CAR RECEIVER MODEL: 92019 FCC ID NO: APB92019-00A4R REPORT NO: 00U0183 ISSUE DATE: APRIL 14, 2000 Prepared for MATTEL, INC. 333 CONTINENTAL BLVD EL SEGUNDO, CA 90246 USA Prepared by COMPLIANCE ENGINEERING SERVICES, INC. d.b.a. COMPLIANCE CERTIFICATION SERVICES 1366 BORDEAUX DRIVE SUNNYVALE, CA 94089, USA TEL: (408) 752-8166 FAX: (408) 752-8168 REPORT NO: 00U0183DATE: APRIL 14, 2000FCC ID:APB92019-00A4R EUT: 49MHz RC CAR RECEIVER PAGE NO: 0 COMPLIANCE CERTIFICATION SERVICESCCS DOCUMENT NO: CCSUP4021B 1366 BORDEAUX DRIVE, SUNNYVALE CA 94089TEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. TABLE OF CONTENTS 1.VERIFICATION OF COMPLIANCE ............................................................................................................. 1 2.PRODUCT DESCRIPTION .............................................................................................................................. 2 3.TEST FACILITY ................................................................................................................................................ 2 4.MEASUREMENT EQUIPMENT USED ......................................................................................................... 2 5.TEST CONFIGURATION................................................................................................................................. 3 6.TESTS CONDUCTED........................................................................................................................................ 3 7. RADIATED EMISSION TEST PROCEDURE ................................................................................................... 4 8.COHERENT TESTS .......................................................................................................................................... 4 9.EQUIPMENT MODIFICATIONS.................................................................................................................... 4 10.TEST CONFIGURATION PHOTOS (RADIATED EMISSION TEST) ................................................. 5 ATTACHMENT: Proposed FCC ID Label Agent Authorization Letter Test data • Radiated Emission Data Block Diagram/Schematics User Manual REPORT NO: 00U0183DATE: APRIL 14, 2000FCC ID:APB92019-00A4R EUT: 49MHz RC CAR RECEIVER PAGE NO: 1 COMPLIANCE CERTIFICATION SERVICESCCS DOCUMENT NO: CCSUP4021B 1366 BORDEAUX DRIVE, SUNNYVALE CA 94089TEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 1.VERIFICATION OF COMPLIANCE COMPANY NAME:MATTEL, INC. 333 CONTINENTAL BLVD. EL SEGUNDO, CA 90246 USA CONTACT PERSON:VLADIMIR SOSNOVSKY / ENGINEER TELEPHONE NO.:310-252-5595 EUT DESCRIPTION:49MHz RC CAR RECEIVER MODEL NAME/NUMBER :92019 DATE TESTED :APRIL 14, 2000 REPORT NUMBER:00U0183 TYPE OF EQUIPMENTUNINTENTIONAL RADIATOR EQUIPMENT TYPE49 MHz SUPERREGENERATE RECEIVER MEASUREMENT PROCEDUREANSI 63.4 / 1992 LIMIT TYPECERTIFICATION FCC RULECFR 47, PART 15.109 The above equipment was tested by Compliance Engineering Services, Inc. for compliance with the requirements set forth in CFR 47, PART 15. This said equipment in the configuration described in this report shows that maximum emission levels emanating from equipment are within the compliance requirements. Warning : This document reports conditions under which testing was conducted and results of tests performed. This document may not be altered or revised in any way unless done so by Compliance Certification Services and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by Compliance Certification will constitute fraud and shall nullify the document. T. N. COKENIAS / ENGINEERING DIRECTOR COMPLIANCE ENGINEERING SERVICES, INC. REPORT NO: 00U0183DATE: APRIL 14, 2000FCC ID:APB92019-00A4R EUT: 49MHz RC CAR RECEIVER PAGE NO: 2 COMPLIANCE CERTIFICATION SERVICESCCS DOCUMENT NO: CCSUP4021B 1366 BORDEAUX DRIVE, SUNNYVALE CA 94089TEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 2.PRODUCT DESCRIPTION MATTEL, INC., Model 92019 is the receiving portion of Radio Control Toy Car. The associated Transmitter is manufactured by Mattel, Inc., FCC ID: APB92019-00A4T. 3.TEST FACILITY The 3 meter open area test site and conducted measurement facility used to collect the radiated data is located at 561F Monterey Road, Morgan Hill, California, U.S.A. A detailed description of the test facilities was submitted to the Commission on May 27, 1994. The measuring instrument which was utilized in performing the tests documented herein has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipment which is traceable to recognized national standards. 4.MEASUREMENT EQUIPMENT USED ManufacturerModel Number DescriptionCal Due Date H.P.8593EMPortable Spectrum Analyzer08/00 CHASECBL6112BBilog Antenna (30-1000 MHz) 10/00 H.P.8447DPreamplifier (0.1 - 1300 MHz) 09/00 ARADRG-18/AAntenna(1 - 18GHZ)12/00 H.P.8449BPreamplifier (1-26.5GHZ)03/01 REPORT NO: 00U0183DATE: APRIL 14, 2000FCC ID:APB92019-00A4R EUT: 49MHz RC CAR RECEIVER PAGE NO: 3 COMPLIANCE CERTIFICATION SERVICESCCS DOCUMENT NO: CCSUP4021B 1366 BORDEAUX DRIVE, SUNNYVALE CA 94089TEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reprod…

Text truncated - open the document above for the full version.

REPORT NO: 00U0183DATE: APRIL 14, 2000FCC ID:APB92019-00A4R EUT: 49MHz RC CAR ALARM RECEIVER PAGE NO: 5 COMPLIANCE CERTIFICATION SERVICESCCS DOCUMENT NO: CCSUP4021B 1366 BORDEAUX DRIVE, SUNNYVALE CA 94089TEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full without the written approval of CCS. This document may be altered or revised by Compliance Certification Services personnel only, and shall be noted in the revision section of the document. 10.TEST CONFIGURATION PHOTOS (Radiated Emission Test)