AU792U21B10865MTCDTIP2

Conduit ® IP67Series200 Base Station MTCDTIP2HardwareGuide CONDUITIP67200 SERIESBASESTATIONHARDWAREGUIDE 2Conduit ® IP67Series200 BaseStationMTCDTIP2HardwareGuide ConduitIP67200 SeriesBaseStationHardwareGuide Models:MTCDTIP2-LNA3-B11UKP-L1L,MTCDTIP2-LNA3-B11UKP-L1M,MTCDTIP2-EN-B11UKP-L1M,MTCDTIP2-EN-B11UKP-L1L Part Number:S000778Version1.0 Copyright This publicationmay not be reproduced,in wholeor in part,withoutthe specificand expresspriorwrittenpermissionsignedby an executiveofficerof Multi-TechSystems,Inc. All rightsreserved.Copyright© 2021by Multi-TechSystems,Inc. Multi-TechSystems,Inc. makesno representationsor warranties,whetherexpress,impliedor by estoppels,withrespectto the content,information, materialand recommendationshereinand specificallydisclaimsany impliedwarrantiesof merchantability,fitnessfor any particularpurposeand non- infringement. Multi-TechSystems,Inc. reservesthe rightto revisethis publicationand to makechangesfromtimeto timein the contenthereofwithoutobligationof Multi-TechSystems,Inc. to notifyany personor organizationof suchrevisionsor changes. Trademarksand RegisteredTrademarks MultiTech,Conduit,and the MultiTechlogo are registeredtrademarksand mPoweris a trademarkof Multi-TechSystems,Inc. All otherproductsand technologiesare the trademarksor registeredtrademarksof theirrespectiveholders. LegalNotices The MultiTechproductsare not designed,manufacturedor intendedfor use, and shouldnot be used,or sold or re-soldfor use, in connectionwith applicationsrequiringfail-safeperformanceor in applicationswherethe failureof the productswouldreasonablybe expectedto resultin personalinjuryor death,significantpropertydamage,or seriousphysicalor environmentaldamage.Examplesof suchuse includelife supportmachinesor otherlife preservingmedicaldevicesor systems,air trafficcontrolor aircraftnavigationor communicationssystems,controlequipmentfor nuclearfacilities,or missile,nuclear,biologicalor chemicalweaponsor othermilitaryapplications(“RestrictedApplications”). Use of the productsin suchRestricted Applicationsis at the user’s sole risk and liability. MULTITECHDOESNOTWARRANTTHATTHE TRANSMISSIONOF DATABY A PRODUCTOVERA CELLULARCOMMUNICATIONSNETWORKWILLBE UNINTERRUPTED,TIMELY,SECUREOR ERRORFREE,NORDOESMULTITECHWARRANTANY CONNECTIONOR ACCESSIBILITYTO ANY CELLULAR COMMUNICATIONSNETWORK.MULTITECHWILLHAVENO LIABILITYFOR ANY LOSSES,DAMAGES,OBLIGATIONS,PENALTIES,DEFICIENCIES,LIABILITIES, COSTSOR EXPENSES(INCLUDINGWITHOUTLIMITATIONREASONABLEATTORNEYSFEES)RELATEDTO TEMPORARYINABILITYTO ACCESSA CELLULAR COMMUNICATIONSNETWORKUSINGTHE PRODUCTS. The MultiTechproductsand the final applicationof the MultiTechproductsshouldbe thoroughlytestedto ensurethe functionalityof the MultiTech productsas usedin the final application.The designer,manufacturerand resellerhas the sole responsibilityof ensuringthat any end user productinto whichthe MultiTechproductis integratedoperatesas intendedand meetsits requirementsor the requirementsof its director indirectcustomers. MultiTechhas no responsibilitywhatsoeverfor the integration,configuration,testing,validation,verification,installation,upgrade,supportor maintenance of suchend user product,or for any liabilities,damages,costsor expensesassociatedtherewith,exceptto the extentagreeduponin a signedwritten document.To the extentMultiTechprovidesany commentsor suggestedchangesrelatedto the applicationof its products,suchcommentsor suggested changesis performedonly as a courtesyand withoutany representationor warrantywhatsoever. ContactingMultiTech KnowledgeBase The KnowledgeBaseprovidesimmediateaccessto supportinformationand resolutionsfor all MultiTechproducts.Visit http://www.multitech.com/kb.go. SupportPortal To createan accountand submita supportcasedirectlyto our technicalsupportteam,visit:https://support.multitech.com. Support BusinessHours:M-F,8amto 5pmCT CountryBy EmailBy Phone Europe,MiddleEast,Africa:[email protected]+(44)118 959 7774 U.S.,Canada,all others:[email protected](800)972-2439or (763)717-5863 Warranty To readthe warrantystatementfor yourproduct,visit https://www.multitech.com/legal/warranty. For otherwarrantyoptions,visit www.multitech.com/es.go. WorldHeadquarters Multi-TechSystems,Inc. 2205WoodaleDrive,MoundsView,MN 55112 Phone:(800)328-9717or (763)785-3500 Fax (763)785-9874 CONTENTS Conduit ® IP67Series200 BaseStationMTCDTIP2HardwareGuide3 Contents Chapter1 – ProductOverview.................................................................................................................................5 BuildOptions.................................................................................................................................................................5 DocumentationOverview.............................................................................................................................................5 DeveloperDocumentation..........................................................................................................................................6 PoweroverEthernet(PoE)...........................................................................................................................................6 Chapter2 – Specificationsand RelatedInformation................................................................................................7 Dimensions....................................................................................................................................................................7 Specifications................................................................................................................................................................8 LEDsand Connectors..................................................................................................................................................10 LEDs...........................................................................................................................…

Text truncated - open the document above for the full version.

10/05/2021 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern, The following application is submitted by Multi-Tech systems LLC for the original certification of our Model MTCDTIP2, FCC ID: AU792U21B10865 under FCC Part 15.247. The MTCDTIP2 is a gateway operating in the ISM band (902-928 MHz). It contains a LoRa transceiver and an LTE cellular module supporting LTE bands. The Telit LTE module is pre-approved module with FCC ID of RI7LE910NAV2. This current evaluation covers the LoRa transceiver on the downlink band 923.3-927.5 MHz. Models covered by this application are MTCDTIP2-LNA3-B11UKP-L1L, which has the cell radio and Ethernet included in the build and the MTCDTIP2-EN-B11UKP-L1L which has no cell radio but still has Ethernet. Both use the same PCB and are population options. Sincerely, 10/05/2021 Signature Date Name: Tracey Dickinson Title: VP of Program Management and Continuous Improvement

4/27/2021 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern, MultiTech Systems Inc. respectfully under the provision of 47 CFR 0.459 and 0.457(d) request confidentiality of certain material provided with the submission of MTCDTIP2 under FCC ID AU792U21B10865. The confidentially request applies to the Electrical Schematics of the circuitry, Block Diagrams, and Operation Description contained in this filing and included in the following files. • MTCDTIP2-Schematics.pdf • MTCDTIP2-BlockDiagramRadio.pdf • MTCDTIP2-OperationalDescription.pdf The MTCDTIP2 has been developed at considerable effort and expense by MultiTech Systems LLC. These items are considered as trade secrets and therefore public access to the proprietary material could possibly result in duplication of equipment that could severely damage the company's business advantage I appreciate your assistance in this manner, 4/27/2021 Signature Date Name: Tracey Dickinson Title: VP of Program Management and Continuous Improvement

June 7, 2021 FCC Authorization To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Professional installation Statement for FCC ID: AU792U21B10865 We the undersigned, state that that our device requires professional installation based on the following: 1. This device is sold through Authorized Value Added Distributors whose customers are engineering managers, network administrators, and IT professionals. These individuals use this device in the design and deployment of industrial, private local networks to collect data from remote LoRa-enabled sensors located within a particular geography, campus, or building. 2. This device is not a consumer-grade product and not available for sale through consumer electronics retailers or websites. 3. This is a fixed location device and designed specifically for outdoor environments. Mounting locations include: poles, exterior building walls, building roof, and towers. Access to these secure and private locations is controlled by the property/building owner or manager and limited by the lease, deed, or other contract associated with these locations. 4. This device requires technical skills, understanding, and training to configure the LoRa network, LoRa sensors, wireless cellular carrier, and data backhaul. Professionals are responsible for following local building and electrical codes are followed for power means and grounding method. Professionals also are responsible for compliance with local and national health and safety regulations. 5. This device requires an industrial-grade LoRa antenna, designed to survive in harsh outdoor environments. Antenna characteristics include: • Ingress Protection: IP67 rating • Rated Wind-Velocity: 124 MPH • Flammability Rating: UL94 HB • UV protection using Radome materials • Operating Temperature: -40 to +85C • Robust, waterproof N-type connector 6. Technical documentation provided with the device communicates the above installation considerations as well as specific guidance on LoRa antenna selection. “Due to FCC 15.203 regulations, the MTCDTIP2 requires installation by a professional, to insure the integrity of the radio transmission system. The authority to operate the LoRa transmitter will be void if using antennas other than the ones listed in Table xxx. Contact Multi-Tech for additional antenna information” Table xxx Manufacturer Model Description L-ComHGV-906U 6dBi Gain IP67 Lora Antenna Pulse RO8063/21704NM 3dBi Gain IP67 Lora Antenna By providing the above warning and the antenna information to our customers and offering the proper antennas that are approved to use with this product we are controlling the use of the transmission system. This applies to the following project: Product Name : MTCDTIP2 IP67 200 Series (IP67 Conduit for Outdoor LoRa® Deployments) Models: MTCDTIP2-LNA3-B11UKP-L1x; MTCDTIP2-EN-B11UKP-L1x 22 J une 2021 Date Name: Tracey Dickinson Title: VP of Program Management and Continuous Improvement

L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845 WWW.L-COM.COM E-MAIL: [email protected] PHONE: 1-800-343-1455 FAX: 1-978-689-9484 © L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks. HyperLink Wireless 800/900 MHz 6 dBi High Performance Omnidirectional Antenna Model: HGV-906U Applications  900 MHz ISM band and Wireless LAN systems  Multipoint applications  Non Line of Sight (NLOS)  Wireless video links  GSM, SCADA applications Features  Superior all weather performance  Rugged industrial grade design  Lightweight fiberglass radome  Integral N-Female connector  Heavy-duty steel mounting bracket Description The HyperLink HGV-906U is a high performance omnidirectional antenna designed for the 800 MHz / 900 MHz ISM band. It is ideally suited for multipoint, Non Line of Sight (NLOS) and mobile applications where high gain and wide coverage is desired. Typical applications include 900MHz Wireless LAN, SCADA, Wireless Video Links and 800 MHz as well as 900MHz Cellular band applications. This antenna features an integral N-Female bulkhead type connector that mounts through the wall of an equipment enclosure. Included with the HGV- 906U is a mast mounting kit. Consisting of a heavy-duty steel bracket and a pair of U-bolts, this kit allows installation on masts up to 2.0" in diameter. This omni antenna’s construction features a rugged 1.3" diameter white high intensity fiberglass radome for durability and aesthetics. It is designed for all weather operation. Specifications Mechanical Specifications Frequency 824 – 960 MHz Gain 6 dBi Vertical Beam Width 30 Degrees Horizontal Beam Width 360 Degrees Impedance 50 Ohm Max. Input Power 100 Watts VSWR < 1.5:1 avg. L-COM, INC. 45 BEECHWOOD DRIVE NORTH ANDOVER, MA 01845 WWW.L-COM.COM E-MAIL: [email protected] PHONE: 1-800-343-1455 FAX: 1-978-689-9484 © L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks. Electrical Specifications Connector Integral N-Female Weight 2.4 lbs. (1.1 Kg) Length 23.6 in. (600 mm) Diameter 1.3 in. (33 mm) Radome Material White Fiberglass Mounting Mast Size 1.2 to 2 in. Dia. (31.7 to 50.8 mm dia.) Polarization Vertical Operating Temperature -40° C to 85° C (-40° F to 185° F) Rated Wind Velocity 108 MPH RoHS Compliant Yes RF Antenna Patterns

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. EAR-Controlled Data - This document contains technical data whose export and reexport/retransfer is subject to control by the U.S. Department of Commerce under the Export Administration Act and the Export Administration Regulations. The Department of Commerce’s prior written approval may be required for the export or re- export/retransfer of such technical data to any foreign person, foreign entity or foreign organization whether in the United States or abroad. More: https://www.bis.doc.gov/index.php/forms-documents/regulations-docs/14-commerce-country-chart/fileT Multi-Tech Systems, Inc. MTCDTIP2- L4E1-B11EEP-L1L FCC 1.1307:2021 Cellular LoRa Report: MLTI0180.10 CERTIFICATE OF EVALUATION 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing Last Date of Evaluation: Tuesday, July 20, 2021 Multi-Tech Systems, Inc. EUT: MTCDTIP2- L4E1-B11EEP-L1L RF Exposure Evaluation Standards Specification Method FCC 1.1307:2021 FCC 1.1307:2021 Results Method Clause Description Applied Results Comments (b)(3)(ii)(B) Exemption from RF Exposure Evaluation Yes Pass None Deviations From Evaluation Standards None Approved By: Donald Facteau, Process Architect Report No. MLTI0180.10EAR-Controlled Data2/11 RF Exposure Condition 2018-07-17 The following RF Exposure conditions were used for the assessment documented in this report: Intended Use Fixed Location on Body (if applicable) NA How is the Device Used The MTCDTIP2- L4E1-B11EEP-L1L is used at a distance of greater than 20 cm from the user. Radios Contained in the Same Host Device Cellular LoRa Simultaneous Transmitting Radios Cellular, LoRa Body Worn Accessories None Environment General Population/Uncontrolled Exposure Report No. MLTI0180.10EAR-Controlled Data3/11 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. MLTI0180.10EAR-Controlled Data4/11 ACCREDITATIONS AND AUTHORIZATIONS 2021.02.26 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Element to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notified Body validated for the EMCD and RED Directives. United Kingdom BEIS – Recognized by the UK as an Approved Body under the UK Radio Equipment and UK EMC Regulations. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: https://www.nwemc.com/emc-testing-accreditations Report No. MLTI0180.10EAR-Controlled Data5/11 FACILITIES 2020.12.15 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. MLTI0180.10EAR-Controlled Data6/11 PRODUCT DESCRIPTION 2018-07-17 Client and Equipment Under Evaluation Information Company Name: Multi-Tech Systems, Inc. Address: 2205 Woodale Drive City, State, Zip: SAINT PAUL, MN 55112 Evaluation Requested By: Jim Asp EUT: MTCDTIP2- L4E1-B11EEP-L1L Date of Evaluation: Tuesday, July 20, 2…

Text truncated - open the document above for the full version.

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. Multi-Tech Systems, Inc. MTCDTIP2-LNA3-B11UKP-L1L MTCDTIP2-EN-B11UKP-L1L FCC 15.247:2021 902 - 928 MHz Other Wideband (DTS) Transceiver Report: MLTI0180.6, Issue Date: July 26, 2021 NVLAP LAB CODE: 200881-0 CERTIFICATE OF TEST 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: February 11, 2021 Multi-Tech Systems, Inc. EUT: MTCDTIP2-LNA3-B11UKP-L1L Radio Equipment Testing Standards Specification Method FCC 15.207:2021 ANSI C63.10:2013, KDB 558074 FCC 15.247:2021 Results Method Clause Test Description Applied Results Comments 6.2 Powerline Conducted Emissions (Transmitter) Yes Pass 6.5, 6.6, 11.12.1, 11.13.2 Spurious Radiated Emissions Yes Pass 11.6 Duty Cycle Yes NA Characterization of radio operation. 7.8.2 Carrier Frequency Separation No N/A Not required for DTS devices. 7.8.3 Number of Hopping Frequencies No N/A Not required for DTS devices. 7.8.4 Dwell Time No N/A Not required for DTS devices. 11.9.1.1 Output Power Yes Pass 11.9.1.1 Equivalent Isotropic Radiated Power Yes Pass 11.11 Band Edge Compliance Yes Pass 7.8.6 Band Edge Compliance - Hopping Mode No N/A Not required for DTS devices. 11.8.2 Occupied Bandwidth Yes Pass 11.11 Spurious Conducted Emissions Yes Pass 11.10.2 Power Spectral Density Yes Pass Deviations From Test Standards None Approved By: Eric Brandon, Department Manager Report No. MLTI0180.62/47 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. MLTI0180.63/47 ACCREDITATIONS AND AUTHORIZATIONS 2021.02.26 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC 17065 as a product certifier. This allows Element to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notified Body validated for the EMCD and RED Directives. United Kingdom BEIS – Recognized by the UK as an Approved Body under the UK Radio Equipment and UK EMC Regulations. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: https://www.nwemc.com/emc-testing-accreditations Report No. MLTI0180.64/47 FACILITIES 2020.12.15 California Labs OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 Oregon Labs EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 98011 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Innovation, Science and Economic Development Canada 2834B-1, 2834B-3 2834E-1, 2834E-3 2834D-1 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 A-0108 A-0201 A-0110 Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA US0158 US0175 US0017 US0191 US0157 Report No. MLTI0180.65/47 MEASUREMENT UNCERTAINTY TMU.2015.07.10 Measurement Uncertainty When a measurement is made, the result will be different from the true or theoretically correct value. The difference is the result of tolerances in the measurement system that cannot be completely eliminated. To the extent that technology allows us, it has been our aim to minimize this error. Measurement uncertainty is a statistical expression of measurement error qualified by a probability distribution. A measurement uncertainty estimation has been performed for each test per our internal quality document QM205.4.6. The estimation is used to compare the measured result with its "true" or theoretically correct value. The expanded measurement…

Text truncated - open the document above for the full version.

POWERLINE CONDUCTED EMISSIONS WTD.2020.12.03.1 EmiR5 2021.01.08.0, PSA-ESCI 2021.01.22.0 SPURIOUS RADIATED EMISSIONS photo PSA-ESCI 2020.06.24.2 photos PSA-ESCI 2020.06.24.2 SE LORA FCC 001.jpg SE LORA FCC 002.jpg LORA FCC 002 SPURIOUS RADIATED EMISSIONS photo PSA-ESCI 2020.06.24.2 photos PSA-ESCI 2020.06.24.2 SE LORA FCC 003.jpg SE LORA FCC 004.jpg LORA FCC 004 SPURIOUS RADIATED EMISSIONS photo PSA-ESCI 2020.06.24.2 photos PSA-ESCI 2020.06.24.2 SE LORA FCC 005.jpg XMit 2020.03.25.0 FCC direct connect (1).JPG FCC direct connect (2).JPG DIRECT CONNECT