B32MX900-04BTWIFII/O module

DRAFT MX 900 Series Installation Guide DRAFT DRAFT MX 900 Series Installation Guide Part Number SPC132-022-01-A, Revision A March 1, 2012 VeriFone ® , Inc. 2099 Gateway Place Suite 600 San Jose, CA 95110 Telephone: 408-232-7800 http://www.verifone.com Printed in the United States of America. © 2012 by VeriFone, Inc. No part of this publication covered by the copyrights herein may be reproduced or copied in any form or by any means — graphic, electronic, or mechanical, including photocopying, taping, or information storage and retrieval systems — without written permission of the publisher. The contents of this document and all features and specifications are subject to change without notice. The information contained herein does not represent a commitment on the part of VeriFone, Inc. Publications are not stocked at the address given above. Requests for VeriFone publications should be made to your VeriFone representative. VeriFone, the VeriFone logo, and Ruby SuperSystem are registered trademarks of VeriFone, Inc. Sapphire, Topaz, HPV-20, Ruby Manager, Everest, E ASY ID, Electronic Journal On-site, and Ruby Card are trademarks of VeriFone, Inc. in the U.S. and/or other countries. All other trademarks or brand names are the properties of their respective holders. DRAFT DRAFT March 1, 2012 Contents 1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . 1 Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Document Organization . . . . . . . . . . . . . . . . . . . . . . . 1 Modifications to this document . . . . . . . . . . . . . . . . . . . . 1 Acronyms, Abbreviations, and Definitions . . . . . . . . . . . . . 2 2. Hardware Installation . . . . . . . . . . . . . . . . . . . 3 Installing the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 To unpack the shipping carton . . . . . . . . . . . . . . . . . . . . . 3 Selecting a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Stand Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Wall Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PIN Protection Measures . . . . . . . . . . . . . . . . . . . . . . . . . 7 Installing Optional Components . . . . . . . . . . . . . . . . . . . . 8 Installing Countertop Wedge . . . . . . . . . . . . . . . . . . . . 8 Removing or Installing the I/O Module . . . . . . . . . . . . . 9 Installing MSAM or SD Cards . . . . . . . . . . . . . . . . . . . 10 Installing the Stylus and Holster . . . . . . . . . . . . . . . . 14 Removing the Privacy Shield . . . . . . . . . . . . . . . . . . . 16 Connecting the Device . . . . . . . . . . . . . . . . . . . . . . . . . 17 I/O Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Multiport Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Connecting ECR in Tailgate Mode . . . . . . . . . . . . . . . . 20 Connecting to a Host PC. . . . . . . . . . . . . . . . . . . . . . 21 Connecting to the Ethernet LAN . . . . . . . . . . . . . . . . 21 Connecting to USB Host or Hub . . . . . . . . . . . . . . . . . 21 Powering up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Using the I/O Module . . . . . . . . . . . . . . . . . . . . . . . . 22 Using the Multiport Cable . . . . . . . . . . . . . . . . . . . . . 23 Calibrate Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . 24 3. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . 25 DRAFT iiMX 900 Series Installation Guide March 1, 2012 Cleaning the Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Cleaning the Display Screen . . . . . . . . . . . . . . . . . . . . . . 25 Magnetic Stripe Cleaner. . . . . . . . . . . . . . . . . . . . . . . . . 25 Smart Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 4. Terminal Specifications . . . . . . . . . . . . . . . . . . 27 Terminal Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 27 DRAFT March 1, 2012 1 INTRODUCTION This installation guide is your primary source of information for setting up and installing the MX 900 Series terminals, the MX 915 ™ and MX 925 ™ . Intended Audience This guide is useful for anyone installing and configuring the MX 900 Series terminals. A basic description of terminal features is also provided. Document Organization The following chapters are included: Chapter 1, Introduction, explains the Intended Audience, Document Organization, and common acronyms, abbreviations, and definitions used. Chapter 2, Installation, explains how to install the MX 900 Series terminals. Chapter 3, Maintenance, explains how to maintain your MX 900 Series terminals. Chapter 4, Specifications, provides information on power, environment, and dimensions of the hardware. Modifications to this document This document may be changed or extended to include new product requirements. DRAFT 2MX 900 Series Installation Guide March 1, 2012 Acronyms, Abbreviations, and Definitions The following table describes the common acronyms, abbreviations, and definitions used: ConventionMeaning BFIBuffer Flush Interval bpsbits per second CRCCyclic Redundancy Check FAFile Authentication FirmwareSoftware in FLASH/ROM FTPFile Transfer Protocol GISKEGlobal Interoperable Secure Key Exchange iPKGThe Itsy Package Management System IPPInternal PIN Pad ISRInterrupt Service Routine JFFS2Journaling Flash File System KLKVSS Key Loading Key KSNKey Serial Number KVCKey Verification Code LEDLight Emitting Diode MS Master Session MSRMagnetic Stripe Reader NFSNetwork File System OSSOpen Sound System PEDPIN Entry Device PEKPIN Encryption Key RFCRRF Card Reader RRTReceive Record Threshold RTCReal-time Clock SAMSecurity Access Module VRK VeriShield Remote Key VSSVeriShield Security Scripts DRAFT March 1, 2012 2 HARDWARE INSTALLATION This chapter describes the MX 900 Series installation procedures and includes connection examples. Installing the Device This section presents installation guidelines for the …

Text truncated - open the document above for the full version.

Date: August 23, 2012 Declaration We, VeriFone Inc., declare that the device of FCC ID: B32MX900-04BTWIFI, Model Name: MX900-04, for 2.4G part of this device, only channels 1~11, will be used in North America and bands of 802.11 b/g/n channels 12~13, non-US frequency, are disabled for hotspot capabilities. Country code selection is also disabled. Should you have any question or comment regarding this matter, please have my best attention. Sincerely yours, _____________________ Don Perkins VeriFone Inc. Tel: +1 (916) 625-1833 E-mail: [email protected]

Date: August 23, 2012 Declaration To whom it may concern, MX900-04 is a WLAN/Bluetooth combination antenna with FCC ID: B32MX900-04BTWIFI. This WLAN/Bluetooth co-existence mechanism is to ensure that the WLAN and Bluetooth transmitters would not simultaneously operate. Therefore, WLAN and Bluetooth antenna in MX900-04 should not be considered to be able to transmit simultaneously. Though the users can use WLAN and Bluetooth simultaneously, but the real situation is that WLAN and Bluetooth are used by time sharing and no overlap transmission. Should you have any question, please have my best attention. Sincerely yours, _______________ Don Perkins VeriFone Inc. Tel: +1 (916) 625-1833 E-mail: [email protected]

Date: August 27, 2012 FCC ID: B32MX900-04BTWIFI Item Requirements EUT 1 The modular transmitter must have its own RF shielding. The RF module has its own RF shielding. Please see exhibition external photos. 2 The modular transmitter must have buffered modulation / data inputs. The EUT has buffer modulation / data inputs part no.: BCM4329 3 The modular transmitter must have its own power supply regulation. The EUT has its own power supply regulation part no.: BCM4329 4 The modular transmitter must comply with the antenna requirements of the Section 15.203 and 15.204(c). The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo are shown in the test report. 5 The modular transmitter must be tested in a stand-alone configuration. The module is tested as a limited module configuration via a specified phone. Please see section Photographs of Test Configuration in the test report. 6 The modular transmitter must be labeled with its own FCC ID number. The FCC ID will be affixed on the RF module. 7 The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The EUT will compliant with all applicable FCC rules. Detail instruction will be stated in the user’s manual. 8 The modular transmitter must comply with any applicable RF exposure requirement. The modular transmitter complies with RF exposure requirement. RF Exposure is addressed in the RF exposure report. Effective Date: Immediately. __________________ Don Perkins VeriFone Inc. Tel: +1 (916) 625-1833 E-mail: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT

Page 2 Page 3 Page 4 Page 5

FCC SAR Test Report Report Format Version 4.1.0 Page No. : 1 of 19 Report No. : SA120326C38 Issued Date : Apr. 06, 2012 Revision : R01 FCC SAR Test Report Report No. : SA120326C38 Applicant : VeriFone Inc. Address : 1400 West Stanford Ranch Road Suit 200 Rocklin CA 95765 USA Product : I/O module FCC ID : B32MX900-04BTWIFI Brand : VeriFone Model No. : MX900-04 Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1991 / IEEE 1528:2003 FCC OET Bulletin 65 Supplement C (Edition 01 -01) KDB 248227 D01 v01r02 / KDB 447498 D01 v04 Date of Testing : Mar. 29, 2012 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch - Taiwan HwaYa Lab, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. This test report consists of 19 pages in total except Appendix. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Prepared By : Ivonne Wu / Senior Specialist Approved By : Roy Wu / Manager FCC SAR Test Report Report Format Version 4.1.0 Page No. : 2 of 19 Report No. : SA120326C38 Issued Date : Apr. 06, 2012 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ................................................................................................................ 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot.................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 12 3.4 SAR Measurement Procedure ................................................................................................................................... 13 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 13 3.4.2 Volume Scan Procedure................................................................................................................................... 13 3.4.3 Power Drift Monitoring ...................................................................................................................................... 13 3.4.4 Spatial Peak SAR Evaluation ........................................................................................................................... 14 3.4.5 SAR Averaged Methods ................................................................................................................................... 14 4. SAR Measurement Evaluation ............................................................................................................................................ 15 4.1 EUT Configuration and Setting ................................................................................................................................... 15 4.2 EUT Testing Position .................................................................................................................................................. 15 4.3 Tissue Verification ...................................................................................................................................................... 15 4.4 System Verification ..................................................................................................................................................... 15 4.5 Conducted Power Results ................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF120326C38-1 1 of 51 Report Format Version 5.0.0 FCC TEST REPORT REPORT NO.: RF120326C38-1 MODEL NO.: MX900-04 FCC ID: B32MX900-04BTWIFI RECEIVED: Mar. 26, 2012 TESTED: Mar. 27 ~ Aug. 16, 2012 ISSUED: Aug. 21, 2012 APPLICANT: VeriFone Inc. ADDRESS: 1400 West Stanford Ranch Road Suit 200 Rocklin CA 95765 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120326C38-1 2 of 51 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................................. 4 1. CERTIFICATION ........................................................................................................................... 5 1. SUMMARY OF TEST RESULTS .................................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 2. GENERAL INFORMATION ........................................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................................12 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................13 4. TEST TYPES AND RESULTS ....................................................................................................14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ....................................................14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................14 4.1.2 TEST INSTRUMENTS ................................................................................................................15 4.1.3 TEST PROCEDURES ................................................................................................................17 4.1.4 DEVIATION FROM TEST STANDARD ......................................................................................17 4.1.5 TEST SETUP ..............................................................................................................................18 4.1.6 EUT OPERATING CONDITIONS ...............................................................................................18 4.1.7 TEST RESULTS..........................................................................................................................19 4.2 CONDUCTED EMISSION MEASUREMENT .............................................................................28 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ..........................................................28 4.2.2 TEST INSTRUMENTS ................................................................................................................28 4.2.3 TEST PROCEDURES ................................................................................................................29 4.2.4 DEVIATION FROM TEST STANDARD ......................................................................................29 4.2.5 TEST SETUP ..............................................................................................................................30 4.2.6 EUT OPERATING CONDITIONS ...............................................................................................30 4.2.7 TEST RESULTS..........................................................................................................................31 4.3 NUMBER OF HOPPING FREQUENCY USED ..........................................................................33 4.3.1 LIMIT OF HOPPING FREQUENCY USED ................................................................................33 4.3.2 TEST SETUP ....................................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF120326C38 1 of 46 Report Format Version 5.0.0 FCC TEST REPORT (15.247) REPORT NO.: RF120326C38 MODEL NO.: MX900-04 FCC ID: B32MX900-04BTWIFI RECEIVED: Mar. 26, 2012 TESTED: Mar. 28 ~ Aug. 16, 2012 ISSUED: Aug. 21, 2012 APPLICANT: VeriFone Inc. ADDRESS: 1400 West Stanford Ranch Road Suit 200 Rocklin CA 95765 USA ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF120326C38 2 of 46 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ...........................................................................................4 1. CERTIFICATION ........................................................................................................5 2. SUMMARY OF TEST RESULTS ................................................................................6 2.1 MEASUREMENT UNCERTAINTY .............................................................................6 3. GENERAL INFORMATION ........................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ...........................................................................7 3.2 DESCRIPTION OF TEST MODES .............................................................................8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ..............................9 3.3 DESCRIPTION OF SUPPORT UNITS ..................................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ...................................................... 12 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................... 13 4. TEST TYPES AND RESULTS .................................................................................. 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................. 14 4.1.2 TEST INSTRUMENTS ............................................................................................. 15 4.1.3 TEST PROCEDURES .............................................................................................. 17 4.1.4 DEVIATION FROM TEST STANDARD .................................................................... 17 4.1.5 TEST SETUP ........................................................................................................... 18 4.1.6 EUT OPERATING CONDITIONS ............................................................................. 18 4.1.7 TEST RESULTS....................................................................................................... 19 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................... 29 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ......................................... 29 4.2.2 TEST INSTRUMENTS ............................................................................................. 29 4.2.3 TEST PROCEDURES .............................................................................................. 30 4.2.4 DEVIATION FROM TEST STANDARD .................................................................... 30 4.2.5 TEST SETUP ........................................................................................................... 30 4.2.6 EUT OPERATING CONDITIONS ............................................................................. 30 4.2.7 TEST RESULTS....................................................................................................... 31 4.3 6DB BANDWIDTH MEASUREMENT ....................................................................... 33 4.3.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT ..................................................... 33 4.3.2 TEST SETUP ........................................................................................................... 33 4.3.3 TEST INSTRUMENTS ............................................................................................. 33 4.3.4 TEST PROCEDURE ................................................................................................ 33 4.3.5 DEVIATION FROM TEST STANDARD .................................................................... 33 4.3.6 EUT OPERATING CONDITIONS ............................................................................. 33 4.3.7 TEST RESULTS.....................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST

FCC SAR Test Report Report Format Version 4.1.0 Issued Date : Apr. 06, 2012 Report No. : SA120326C38 Revision : R01 Appendix D. Photographs of EUT and Setup FCC SAR Test Report Report Format Version 4.1.0 Report No. : SA120326C38 Revision : R01 <Photographs of EUT> FCC SAR Test Report Report Format Version 4.1.0 Report No. : SA120326C38 Revision : R01 <Location of Antennas> Ant-1 (WLAN & BT) Ant-2 (WLAN) FCC SAR Test Report Report Format Version 4.1.0 Report No. : SA120326C38 Revision : R01 <Photographs of SAR Setup> Front Face with 0 cm Gap Rear Face with 0 cm Gap Right Side with 0 cm Gap Left Side with 0 cm Gap