B32V660PPoint of Sale Terminal

Date: 2023-04-19 FCC ID: B32V660P To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing Verifone, Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing Verifone, Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely yours, _________________________________________ Kenji Chao / Sr. Director, Hardware Engineering Verifone, Inc. Tel.: 886-2-3789-7334 Fax: 886-2-2655-3168 E- mail:[email protected]

Date: 2023-04-19 FCC ID: B32V660P Declaration letter Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Declaration letter for label requirement The label is permanent affixed in the battery compartment, and the EUT will be selling to market without the battery installed. The users can see the label during the battery installation process. The battery cover can be opened without any special tools. If you have any questions regarding the declaration, please don’t hesitate to contact us. Sincerely yours, _________________________________________ Kenji Chao / Sr. Director, Hardware Engineering Verifone, Inc. Tel.: 886-2-3789-7334 Fax: 886-2-2655-3168 E- mail:[email protected]

Date: 2023-04-19 FCC ID: B32V660P AUTHORIZATION LETTER To Whom It May Concern: Verifone, Inc. hereby authorizes Jenny Nien/ Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Jenny Nien/ Specialist of BV CPS Taoyuan on Verifone, Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, _________________________________________ Kenji Chao / Sr. Director, Hardware Engineering Verifone, Inc. Tel.: 886-2-3789-7334 Fax: 886-2-2655-3168 E- mail:[email protected]

Date: 2023-04 -19 FCC ID: B32V660P To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description Parts List Tune Up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, _________________________________________ Kenji Chao / Sr. Director, Hardware Engineering Verifone, Inc. Tel.: 886-2-3789-7334 Fax: 886-2-2655-3168 E- mail:[email protected]

Reference No.: BCUG-WTW-P2303037_EXT Page 1 of 7 CONSTRUCTION PHOTOS OF EUT Brand: Verifone / Model: V660p-2 Reference No.: BCUG-WTW-P2303037_EXT Page 2 of 7 WWAN Main Ant 0 WLAN/BT Aux Ant 1 Reference No.: BCUG-WTW-P2303037_EXT Page 3 of 7 Reference No.: BCUG-WTW-P2303037_EXT Page 4 of 7 Reference No.: BCUG-WTW-P2303037_EXT Page 5 of 7 Reference No.: BCUG-WTW-P2303037_EXT Page 6 of 7 Reference No.: BCUG-WTW-P2303037_EXT Page 7 of 7

Label Location Model: V660p-2 Brand: Verifone FCC ID:B32V660P IC :787C-V660P Back side of V660p-2 Back side of EUT- Label location: underneath of battery compartment

Reference No.: BCUG-WTW-P2303037_INT Page 1 of 14 CONSTRUCTION PHOTOS OF EUT Brand: Verifone / Model: V660p-2 Reference No.: BCUG-WTW-P2303037_INT Page 2 of 14 Reference No.: BCUG-WTW-P2303037_INT Page 3 of 14 Reference No.: BCUG-WTW-P2303037_INT Page 4 of 14 Reference No.: BCUG-WTW-P2303037_INT Page 5 of 14 Reference No.: BCUG-WTW-P2303037_INT Page 6 of 14 Reference No.: BCUG-WTW-P2303037_INT Page 7 of 14 Reference No.: BCUG-WTW-P2303037_INT Page 8 of 14 Reference No.: BCUG-WTW-P2303037_INT Page 9 of 14 Reference No.: BCUG-WTW-P2303037_INT Page 10 of 14 Reference No.: BCUG-WTW-P2303037_INT Page 11 of 14 Reference No.: BCUG-WTW-P2303037_INT Page 12 of 14 Reference No.: BCUG-WTW-P2303037_INT Page 13 of 14 Reference No.: BCUG-WTW-P2303037_INT Page 14 of 14

SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 31 Report No. : SFBCUG-WTW-P23030371 Issued Date : May 16, 2023 SAR Test Report Report No. : SFBCUG-WTW-P23030371 Applicant : Verifone, Inc. Address : 1400 West Stanford Ranch Road Suite 150 Rocklin CA 95765 USA Product : Point of Sale Terminal FCC ID : B32V660p Brand : Verifone Model No. : V660p-2 FCC Rule Part : CFR §2.1093 Standards : IEEE Std 1528:2013 KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 248227 D01 v02r02, KDB 447498 D01 v06, KDB 941225 D05 v02r05 Sample Received Date : Mar. 13, 2023 Date of Testing : Mar. 17, 2023 ~ Mar. 31, 2023 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our- business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 31 Report No. : SFBCUG-WTW-P23030371 Issued Date : May 16, 2023 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY6 System ............................................................................................................................................... 6 3.2.1 Robot ............................................................................................................................................................... 7 3.2.2 Probes ............................................................................................................................................................. 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 8 3.2.4 Phantoms ......................................................................................................................................................... 8 3.2.5 Device Holder .................................................................................................................................................. 9 3.2.6 System Validation Dipoles ............................................................................................................................. 10 3.2.7 Power Source ................................................................................................................................................ 10 3.2.8 Tissue Simulating Liquids .............................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 13 3.4 SAR Measurement Procedure ................................................................................................................................…

Text truncated - open the document above for the full version.

Plots of System Verification Appendix A. Plots of System Verification The plots for system verification are shown as follows. Report No.: SFBCUG-WTW-P23030371 Plots of System Verification Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2023/03/17 S01 System Check_H1900_230317 DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d036 Communication System: UID 0, CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: H06T27N6_0317 Medium parameters used: f = 1900 MHz; σ = 1.483 S/m; ε r = 40.099; ρ = 1000 kg/m 3 Ambient Temperature： 22.4 °C ; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7797; ConvF(7.65, 7.65, 7.65) @ 1900 MHz; Calibrated: 2022/12/12 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1590; Calibrated: 2022/09/22 - Phantom: SAM Phantom_1982; Type: QD 000 P41 Ax; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Pin=50mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.40 W/kg Pin=50mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 47.69 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 4.18 W/kg SAR(1 g) = 2.07 W/kg; SAR(10 g) = 1.07 W/kg (SAR corrected for target medium) Maximum value of SAR (measured) = 3.43 W/kg Report No.: SFBCUG-WTW-P23030371 Plots of System Verification Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2023/03/17 S02 System Check_H1750_230317 DUT: Dipole 1750 MHz; Type: D1750V2; SN: 1055 Communication System: UID 0, CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: H06T27N6_0317 Medium parameters used: f = 1750 MHz; σ = 1.395 S/m; ε r = 40.318; ρ = 1000 kg/m 3 Ambient Temperature： 22.4 °C ; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7797; ConvF(8.03, 8.03, 8.03) @ 1750 MHz; Calibrated: 2022/12/12 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1590; Calibrated: 2022/09/22 - Phantom: SAM Phantom_1982; Type: QD 000 P41 Ax; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Pin=50mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.92 W/kg Pin=50mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 45.73 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 3.49 W/kg SAR(1 g) = 1.83 W/kg; SAR(10 g) = 0.961 W/kg (SAR corrected for target medium) Maximum value of SAR (measured) = 2.90 W/kg Report No.: SFBCUG-WTW-P23030371 Plots of System Verification Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2023/03/21 S03 System Check_H835_230321 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d121 Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: H06T27N6_0321 Medium parameters used: f = 835 MHz; σ = 0.942 S/m; ε r = 42.554; ρ = 1000 kg/m 3 Ambient Temperature： 22.7 °C ; Liquid Temperature：21.4 °C DASY5 Configuration: - Probe: EX3DV4 - SN7797; ConvF(8.87, 8.87, 8.87) @ 835 MHz; Calibrated: 2022/12/12 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1590; Calibrated: 2022/09/22 - Phantom: SAM Phantom_1982; Type: QD 000 P41 Ax; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Pin=50mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.686 W/kg Pin=50mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 27.84 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 0.786 W/kg SAR(1 g) = 0.501 W/kg; SAR(10 g) = 0.324 W/kg (SAR corrected for target medium) Maximum value of SAR (measured) = 0.694 W/kg Report No.: SFBCUG-WTW-P23030371 Plots of System Verification Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2023/03/31 S04 System Check_H2600_230331 DUT: Dipole 2600 MHz; Type: D2600V2; SN: 1020 Communication System: UID 0, CW; Frequency: 2600 MHz;Duty Cycle: 1:1 Medium: H06T27N3_0331 Medium parameters used: f = 2600 MHz; σ = 1.901 S/m; ε r = 38.652; ρ = 1000 kg/m 3 Ambient Temperature： 22.1 °C ; Liquid Temperature：21.8 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(7.59, 7.59, 7.59) @ 2600 MHz; Calibrated: 2022/05/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1698; Calibrated: 2022/11/17 - Phantom: Twin SAM Phantom_1823; Type: QD000P40 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Pin=50mW/Area Scan (81x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 4.49 W/kg Pin=50mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 46.37 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 5.92 W/kg SAR(1 g) = 2.69 W/kg; SAR(10 g) = 1.18 W/kg (SAR corrected for target medium) Maximum value of SAR (measured) = 4.67 W/kg Report No.: SFBCUG-WTW-P23030371 Plots of System Verification Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2023/03/20 S05 System Check_H750_230320 DUT: Dipole 750 MHz; Type: D750V3; SN: 1013 Communication System: UID 0, CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium: H06T27N6_0320 Medium parameters used: f = 750 MHz; σ = 0.938 S/m; ε r = 42.102; ρ = 1000 kg/m 3 Ambient Temperature： 22.6 °C ; Liquid Temperature：21.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7797; ConvF(9.09, 9.09, 9.09) @ 750 MHz; Calibrated: 2022/12/12 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1590; Calibrated: 2022/09/22 - Phantom: SAM Phantom_1982; Type: QD 000 P41 Ax; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7501) Pin=50mW/Area Scan (61x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.588 W/kg Pin=50mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 25.98 V/m; Power Drift = 0.00 dB Peak SAR (extrapolated) = 0.670 W/kg SAR(1 g) = 0.419 W/kg; SAR(10 g) = 0.274 W/kg (SAR co…

Text truncated - open the document above for the full version.