B32V660PAPoint of Sale Terminal

VeriFone Inc 1400 West Stanford Ranch Road Suite 150 Rocklin CA 95765 USA Date: June 12, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Certifications concerning “covered” equipment pursuant to Part 2.911(d)(5)(i) and (ii) FCC ID: B32V660PA To Whom It May Concern, As required by section 2.911(d)(5)(i) of Commission’s rules (47 CFR), VeriFone Inc certifies that, as of the date of the filing of the application, the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. As required by section 2.911(d)(5)(ii) of Commission’s rules (47 CFR), VeriFone Inc certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Kenji Chao / Sr. Director, Hardware Engineering VeriFone, Inc. Tel.: 886-2-3789-7334 Fax: 886-2-2655-3168 e- mail:[email protected]

VeriFone Inc 1400 West Stanford Ranch Road Suite 150 Rocklin CA 95765 USA Date: June 12, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Certification Designing a U.S. Agent for Service of Process Concerning “Covered” Equipment Pursuant to Section 1.50002 FCC ID: B32V660PA To Whom It May Concern, As required by section 2.911(d)(7) of Commission’s rules (47 CFR), VeriFone Inc acknowledge, consents and certifies that, as of the date of the filing of the application until this certification is revoked in writing by the applicant: • The applicant designates itself as the U.S. agent to accept service of process. • The physical U.S. address and email of the applicant as designated agent are as follows: Attention: Kenji Chao Company: VeriFone Inc Address: 1400 West Stanford Ranch Road Suite 150, Rocklin, California United States FRN: 0022825988 Email: [email protected] • Applicant will remain as the designated agent for service for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. • The agent accepts the designation by VeriFone Inc as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Sincerely, Kenji Chao / Sr. Director, Hardware Engineering VeriFone, Inc. Tel.: 886-2-3789-7334 Fax: 886-2-2655-3168 e- mail:[email protected]

VeriFone Inc 1400 West Stanford Ranch Road Suite 150 Rocklin CA 95765 USA Date: June 12, 2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: B32V660PA To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting confidentiality for exhibits filed with the commission supporting the application of equipment authorization for those items referenced above. VeriFone Inc respectfully requests the Commission to withhold indefinitely from public disclosure the following attachments under Long-Term Confidentiality.  Schematic Diagrams  Block Diagrams  Part List  Operational Description  Tune-up Procedure The above listed documents contain detailed system and equipment descriptions that are proprietary and confidential information under VeriFone trade secret protection. Public disclosure of above documents would be harmful to our company and would provide competitors an unfair advantage. This information is not made publicly available even after commercial release of the device. It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization is issued. Sincerely, _____________________________________ Kenji Chao / Sr. Director, Hardware Engineering VeriFone, Inc. Tel.: 886-2-3789-7334 Fax: 886-2-2655-3168 e-mail:[email protected]

VeriFone Inc 1400 West Stanford Ranch Road Suite 150 Rocklin CA 95765 USA Date: June 12, 2024 To whom it may concern, Please be notified that I, Kenji Chao, have designated Jim Tsai of Sporton International Inc. as the persons being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out in their professional capacity by Jim Tsa i of Sporton International Inc. in connection with all processes required for FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is limited to the following product, and shall remain in place until completion of the certification, or until revoked, whichever is earlier: FCC ID: B32V660PA If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Should you have any questions or comments regarding this matter, please don’t hesitate to contact me. Sincerely yours, Kenji Chao / Sr. Director, Hardware Engineering VeriFone, Inc. Tel.: 886-2-3789-7334 Fax: 886-2-2655-3168 e- mail:[email protected]

Sporton International (Kunshan) Inc. Date: July 5, 2024 Federal Communications Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Antenna specification of NFC is not required for FCC ID: B32V660PA To whom it may concern, All measurements for NFC were performed radiated and that therefore additional antenna gain information is not required. Sincerely yours, Jim Tsai [email protected]

Date: 2024-06-07 System Check_Head_13MHz DUT: CLA13 - SN:1023 Communication System: ; Frequency: 13.000 Medium: HSL. Medium parameters used: f= 13.000 MHz; σ= 0.757 S/m; ε r =53.7 Ambient Temperature: 23.2°C; Liquid Temperature: 22.6°C DASY6 Configuration: - Probe: EX3DV4 - SN7706; ConvF(16.1, 16.1, 16.1); Calibrated: 2024-01-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1303; Calibrated: 2023-11-20 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2135 - Measurement Software: 16.4.0.5005 Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.130 W/kg; SAR (10g) = 0.089 W/kg; Zoom Scan (32.0 mm x 32.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.4 Power Drift = 0.05 dB SAR (1g) = 0.143 W/kg; SAR (10g) = 0.090 W/kg; Smallest distance from peaks to all points 3dB below is 15.7 mm Ratio of SAR at M2 to SAR at M1 = 73.9 %

Date: 2024-06-07 01_NFC_ASK_Top Side_0mm Communication System: Custom Band; Frequency: 13.600 Medium: HSL. Medium parameters used: f= 13.600 MHz; σ= 0.748 S/m; ε r =53.7 Ambient Temperature: 23.2°C; Liquid Temperature: 22.6°C DASY6 Configuration: - Probe: EX3DV4 - SN7706; ConvF(16.1, 16.1, 16.1); Calibrated: 2024-01-24 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1303; Calibrated: 2023-11-20 - Phantom: ELI V8.0 (20deg probe tilt); Serial: 2135 - Measurement Software: 16.4.0.5005 Area Scan (90.0 mm x 120.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.087 W/kg; SAR (10g) = 0.065 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = -0.06 dB SAR (1g) = 0.080 W/kg; SAR (10g) = 0.044 W/kg; Smallest distance from peaks to all points 3dB below is 9.9 mm Ratio of SAR at M2 to SAR at M1 = 72.1 %

Sporton International Inc. (Kunshan) Page : 1 of 24 TEL : +86-512-57900158 Issued Date : Jul. 02, 2024 FCC ID : B32V660PA Form version : 200414 FCC SAR Test Report Report No. : FA440202A FCC SAR TEST REPORT APPLICANT : VeriFone, Inc. EQUIPMENT : Point of Sale Terminal BRAND NAME : Verifone & VERIFONE MODEL NAME : V660p-A, V660p Plus-A FCC ID : B32V660PA STANDARD : FCC 47 CFR Part 2 (2.1093) We, Sporton International Inc. (Kunshan), would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. (Kunshan), the test report shall not be reproduced except in full. Approved by: Si Zhang Sporton International Inc. (Kunshan) No. 1098, Pengxi North Road, Kunshan Economic Development Zone Jiangsu Province 215300 People’s Republic of China Sporton International Inc. (Kunshan) Page : 2 of 24 TEL : +86-512-57900158 Issued Date : Jul. 02, 2024 FCC ID : B32V660PA Form version : 200414 FCC SAR Test Report Report No. : FA440202A Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Administration Data ...................................................................................................................................................... 5 3. Guidance Applied .......................................................................................................................................................... 5 4. Equipment Under Test (EUT) Information ................................................................................................................... 6 4.1 General Information ............................................................................................................................................... 6 5. RF Exposure Limits....................................................................................................................................................... 7 5.1 Uncontrolled Environment ...................................................................................................................................... 7 5.2 Controlled Environment .......................................................................................................................................... 7 6. Specific Absorption Rate (SAR) ................................................................................................................................... 8 6.1 Introduction ............................................................................................................................................................ 8 6.2 SAR Definition ........................................................................................................................................................ 8 7. System Description and Setup .................................................................................................................................... 9 7.1 E-Field Probe ........................................................................................................................................................10 7.2 Data Acquisition Electronics (DAE) .......................................................................................................................10 7.3 Phantom ................................................................................................................................................................ 11 7.4 Device Holder........................................................................................................................................................12 8. Measurement Procedures ...........................................................................................................................................13 8.1 Spatial Peak SAR Evaluation ................................................................................................................................13 8.2 Power Reference Measurement............................................................................................................................14 8.3 Area Scan .............................................................................................................................................................14 8.4 Zoom Scan ............................................................................................................................................................15 8.5 Volume Scan Procedures ......................................................................................................................................15 8.6 Power Drift Monitoring ...........................................................................................................................................15 9. Test Equipment List .....................................................................................................................................................16 10. System Verification ....................................................................................................................................................17 10.1 Tissue Simulating Liquids ....................................................................................................................................17 10.2 Tissue Verification ...............................................................................................................................................18 10.3 System Performance Check Results ...................................................................................................................18 11. RF Exposure Positions .............................................…

Text truncated - open the document above for the full version.

Date: 2024-05-12 System Check_Head_750MHz DUT:D750V3 - SN:1087 Communication System: ; Frequency: 750.000 Medium: HSL. Medium parameters used: f= 750.000 MHz; σ= 0.915 S/m; ε r = 41.9 Ambient Temperature: 23.4°C; Liquid Temperature: 22.7°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(9.76, 10.11, 9.77); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.426 W/kg; SAR (10g) = 0.287 W/kg; Zoom Scan (32.0 mm x 32.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = 0.02 dB SAR (1g) = 0.427 W/kg; SAR (10g) = 0.282 W/kg; Smallest distance from peaks to all points 3dB below is 17.2 mm Ratio of SAR at M2 to SAR at M1 = 89.4 % Date: 2024-05-13 System Check_Head_835MHz DUT:D835V2 - SN:4d091 Communication System: ; Frequency: 835.000 Medium: HSL. Medium parameters used: f= 835.000 MHz; σ= 0.930 S/m; ε r = 40.9 Ambient Temperature: 23.3°C; Liquid Temperature: 22.8°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(9.83, 9.58, 9.35); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 10.0 mm x 15.0 mm SAR (1g) = 0.493 W/kg; SAR (10g) = 0.326 W/kg; Zoom Scan (32.0 mm x 32.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = 0.02 dB SAR (1g) = 0.491 W/kg; SAR (10g) = 0.321 W/kg; Smallest distance from peaks to all points 3dB below is 16.8 mm Ratio of SAR at M2 to SAR at M1 = 88.8 % Date: 2024-05-14 System Check_Head_1750MHz DUT:D1750V2 - SN:1090 Communication System: ; Frequency: 1750.000 Medium: HSL. Medium parameters used: f= 1750.000 MHz; σ= 1.40 S/m; ε r = 40.5 Ambient Temperature: 23.4°C; Liquid Temperature: 22.7°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(8.64, 8.47, 8.41); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 1.88 W/kg; SAR (10g) = 1.03 W/kg; Zoom Scan (32.0 mm x 32.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 5.0 mm Graded Ratio:1.5 Power Drift = 0.06 dB SAR (1g) = 1.90 W/kg; SAR (10g) = 1.01 W/kg; Smallest distance from peaks to all points 3dB below is 10.8 mm Ratio of SAR at M2 to SAR at M1 = 83.6 % Date: 2024-05-15 System Check_Head_1900MHz DUT:D1900V2 - SN:5d118 Communication System: ; Frequency: 1900.000 Medium: HSL. Medium parameters used: f= 1900.000 MHz; σ= 1.43 S/m; ε r = 38.6 Ambient Temperature: 23.2°C; Liquid Temperature: 22.9°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(8.29, 8.18, 8.09); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (40.0 mm x 90.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 1.89 W/kg; SAR (10g) = 1.01 W/kg; Zoom Scan (32.0 mm x 32.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 5.0 mm Graded Ratio:1.5 Power Drift = 0.05 dB SAR (1g) = 1.95 W/kg; SAR (10g) = 1.04 W/kg; Smallest distance from peaks to all points 3dB below is 10.2 mm Ratio of SAR at M2 to SAR at M1 = 81.3 % Date: 2024-05-16 System Check_Head_2600MHz DUT:D2600V2 - SN:1070 Communication System: ; Frequency: 2600.000 Medium: HSL. Medium parameters used: f= 2600.000 MHz; σ= 1.93 S/m; ε r = 39.0 Ambient Temperature: 23.3°C; Liquid Temperature: 22.6°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(7.84, 7.77, 7.69); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 2.86 W/kg; SAR (10g) = 1.29 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = -0.00 dB SAR (1g) = 2.87 W/kg; SAR (10g) = 1.31 W/kg; Smallest distance from peaks to all points 3dB below is 9.0 mm Ratio of SAR at M2 to SAR atM1 = 79.3 % Date: 2024-05-17 System Check_Head_2450MHz DUT:D2450V2 - SN:1095 Communication System: ; Frequency: 2450.000 Medium: HSL. Medium parameters used: f= 2450.000 MHz; σ= 1.82 S/m; ε r = 39.2 Ambient Temperature: 23.1°C; Liquid Temperature: 22.9°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(7.91, 7.86, 7.76); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR (1g) = 2.78 W/kg; SAR (10g) = 1.31 W/kg; Zoom Scan (30.0 mm x 30.0 mm x 30.0 mm): Measurement Grid: 5.0 mm x 5.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = -0.00 dB SAR (1g) = 2.80 W/kg; SAR (10g) = 1.32 W/kg; Smallest distance from peaks to all points 3dB below is 9.0 mm Ratio of SAR at M2 to SAR atM1 = 80.4 % Date: 2024-05-18 System Check_Head_5250MHz DUT:D5GHzV2 - SN:1113 Communication System: ; Frequency: 5250.000 Medium: HSL. Medium parameters used: f= 5250.000 MHz; σ= 4.56 S/m; ε r = 35.0 Ambient Temperature: 23.3°C; Liquid Temperature: 22.7°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(5.99, 5.85, 5.81); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (40.0 mm x 80.0 mm): Measurement Grid: 10.0 mm x 10.0 mm SAR …

Text truncated - open the document above for the full version.

Date: 2024-05-12 01_LTE Band 71_20M_QPSK_1RB_0Offset_Front Face_5mm_Ch133322 Communication System: Band 71; Frequency: 683.000 Medium: HSL. Medium parameters used: f= 683.000 MHz; σ= 0.863 S/m; ε r = 44.1 Ambient Temperature: 23.4°C; Liquid Temperature: 22.7°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(9.76, 10.11, 9.77); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (120.0 mm x 240.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.323 W/kg; SAR (10g) = 0.221 W/kg; Zoom Scan (32.0 mm x 32.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = 0.08 dB SAR (1g) = 0.331 W/kg; SAR (10g) = 0.228 W/kg; Smallest distance from peaks to all points 3dB below is 21.3 mm Ratio of SAR at M2 to SAR atM1 = 88.6 % Date: 2024-05-12 02_LTE Band 12_10M_QPSK_1RB_0Offset_Front Face_5mm_Ch23095 Communication System: Band 12; Frequency: 707.500 Medium: HSL. Medium parameters used: f= 707.500 MHz; σ= 0.871 S/m; ε r = 44.0 Ambient Temperature: 23.4°C; Liquid Temperature: 22.7°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(9.76, 10.11, 9.77); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (120.0 mm x 240.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.344 W/kg; SAR (10g) = 0.235 W/kg; Zoom Scan (32.0 mm x 32.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = -0.08 dB SAR (1g) = 0.383 W/kg; SAR (10g) = 0.264 W/kg; Smallest distance from peaks to all points 3dB below is 19.0 mm Ratio of SAR at M2 to SAR atM1 = 90.5 % Date: 2024-05-12 03_LTE Band 13_10M_QPSK_1RB_0Offset_Front Face_5mm_Ch23230 Communication System: Band 13; Frequency: 782.000 Medium: HSL. Medium parameters used: f= 782.000 MHz; σ= 0.896 S/m; ε r = 43.7 Ambient Temperature: 23.4°C; Liquid Temperature: 22.7°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(9.76, 10.11, 9.77); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (120.0 mm x 240.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.565 W/kg; SAR (10g) = 0.387 W/kg; Zoom Scan (32.0 mm x 32.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = 0.06 dB SAR (1g) = 0.601 W/kg; SAR (10g) = 0.419 W/kg; Smallest distance from peaks to all points 3dB below is 23.1 mm Ratio of SAR at M2 to SAR atM1 = 88.8 % Date: 2024-05-12 04_LTE Band 14_10M_QPSK_1RB_0Offset_Front Face_5mm_Ch23330 Communication System: Band 14; Frequency: 793.000 Medium: HSL. Medium parameters used: f= 793.000 MHz; σ= 0.900 S/m; ε r = 43.7 Ambient Temperature: 23.4°C; Liquid Temperature: 22.7°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(9.76, 10.11, 9.77); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (120.0 mm x 240.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.518 W/kg; SAR (10g) = 0.355 W/kg; Zoom Scan (32.0 mm x 32.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = -0.18 dB SAR (1g) = 0.560 W/kg; SAR (10g) = 0.390 W/kg; Smallest distance from peaks to all points 3dB below is 23.1 mm Ratio of SAR at M2 to SAR at M1 = 88.5 % Date: 2024-05-13 05_WCDMA V_RMC 12.2Kbps_Front Face_5mm_Ch4182 Communication System: Band 5; Frequency: 836.400 Medium: HSL. Medium parameters used: f= 836.400 MHz; σ= 0.921 S/m; ε r = 40.5 Ambient Temperature: 23.3°C; Liquid Temperature: 22.8°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(9.83, 9.58, 9.35); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (120.0 mm x 240.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.631 W/kg; SAR (10g) = 0.428 W/kg; Zoom Scan (32.0 mm x 32.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = 0.12 dB SAR (1g) = 0.638 W/kg; SAR (10g) = 0.451 W/kg; Smallest distance from peaks to all points 3dB below is 22.1 mm Ratio of SAR at M2 to SAR at M1 = 91.5 % Date: 2024-05-13 06_LTE Band 26_15M_QPSK_1RB_0Offset_Front Face_5mm_Ch26865 Communication System: Band 26; Frequency: 831.500 Medium: HSL. Medium parameters used: f= 831.500 MHz; σ= 0.916 S/m; ε r = 40.6 Ambient Temperature: 23.3°C; Liquid Temperature: 22.8°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(9.83, 9.58, 9.35); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe tilt); Serial: 2022 - Measurement Software: cDASY6 V6.6.0.13926 Area Scan (120.0 mm x 240.0 mm): Measurement Grid: 15.0 mm x 15.0 mm SAR (1g) = 0.473 W/kg; SAR (10g) = 0.323 W/kg; Zoom Scan (32.0 mm x 32.0 mm x 30.0 mm): Measurement Grid: 6.0 mm x 6.0 mm x 1.5 mm; Graded Ratio:1.5 Power Drift = -0.17 dB SAR (1g) = 0.502 W/kg; SAR (10g) = 0.353 W/kg; Smallest distance from peaks to all points 3dB below is 23.8 mm Ratio of SAR at M2 to SAR at M1 = 90.8 % Date: 2024-05-14 07_WCDMA IV_RMC 12.2Kbps_Bottom Face_5mm_Ch1312 Communication System: Band 4; Frequency: 1712.400 Medium: HSL. Medium parameters used: f= 1712.400 MHz; σ= 1.37 S/m; ε r = 38.5 Ambient Temperature: 23.4°C; Liquid Temperature: 22.7°C DASY6 Configuration: - Probe: EX3DV4 - SN7729; ConvF(8.64, 8.47, 8.41); Calibrated: 2024-01-22 - Sensor-Surface: 1.4 mm - Electronics: DAE4 Sn1691; Calibrated: 2024-04-19 - Phantom: Twin-SAM V8.0 (30deg probe t…

Text truncated - open the document above for the full version.

D750V3, Serial No. 1087 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. D750V3 – serial no. 1087 750 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2022.2.24 -29.078 52.625 -2.4779 2023.2.23 -25.021 -13.95 49.974 2.651 -5.5764 3.0985 2024.2.23 -27.142 -6.66 53.849 -1.224 -1.9335 -0.5444 <Justification of the extended calibration> The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data> D750V3, serial no. 1087 750MHz – Head-2023.2.23 750MHz – Head-2024.2.23 D835V2, Serial No. 4d091 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. D835V2 – serial no. 4d091 835 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2022.8.19 -20.204 46.745 -8.9142 2023.8.18 -20.743 -2.6 48.115 -1.37 -9.0042 0.09 <Justification of the extended calibration> The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data> D835V2, serial no. 4d091 835MHz – Head-2023.8.18 D1750V2, Serial No. 1090 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. D1750V2 – serial no. 1090 1750 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2022.2.24 -37.115 49.899 -1.3891 2023.2.23 -35.184 -5.2 49.092 0.807 -2.9814 1.5923 2024.2.23 -36.717 -1.07 50.143 -0.244 -1.4581 0.069 <Justification of the extended calibration> The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data> D1750V2, serial no. 1090 1750MHz – Head - 2023-2-23 1750MHz – Head - 2024-2-23 D1900V2, Serial No. 5d118 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. D1900V2 – serial no. 5d118 1900 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2022.3.30 -23.393 52.598 6.4525 2023.3.29 -25.861 10.55 50.443 2.155 4.8447 1.6078 2024.3.29 -23.315 -0.33 52.154 0.444 4.5235 1.929 <Justification of the extended calibration> The return loss is < -20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data> D1900V2, serial no. 5d118 1900MHz – Head - 2023-3-29 1900MHz – Head - 2024-3-29 D2600V2, Serial No. 1070 Extended Dipole Calibrations If dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. D2600V2 – serial no. 1070 2600 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2021.12.20 -23.6 50.5 -6.6 20…

Text truncated - open the document above for the full version.