B32VX600Point of Sale Terminal

VeriFone Part Number DOC087-013-EN-A, Revision A.5 V E R I F O N E C O N F I D E N T IA L R E V I S I O N A . 5 VX 600 for the iPhone 3G/3Gs Installation Guide All rights reserved. No part of the contents of this document may be reproduced or transmitted in any form without the written permission of VeriFone, Inc. The information contained in this document is subject to change without notice. Although VeriFone has attempted to ensure the accuracy of the contents of this document, this document may include errors or omissions. The examples and sample programs are for illustration only and may not be suited for your purpose. You should verify the applicability of any example or sample program before placing the software into productive use. This document, including without limitation the examples and software programs, is supplied “As-Is.” VeriFone, Inc. 2099 Gateway Place, Suite 600 San Jose, CA, 95110 USA 1-800-VERIFONE www.verifone.com VeriFone Part Number DOC087-013-EN-A, Revision A.5 VX 600 for the iPhone 3G/3Gs Installation Guide © 2010 VeriFone, Inc. V E R I F O N E C O N F I D E N T IA L R E V I S I O N A . 5 VeriFone, the VeriFone logo, Omni, VeriCentre, and Verix are registered trademarks of VeriFone. Other brand names or trademarks associated with VeriFone’s products and services are trademarks of VeriFone, Inc. Apple, the Apple logo, and iPhone are registered trademarks of Apple Inc. All other brand names and trademarks appearing in this manual are the property of their respective holders. Comments? Please e-mail all comments on this document to your local VeriFone Support Team. WARNING The VX 600 uses an internal lithium-ion polymer battery. Do not dispose the VX 600 in a fire. lithium-ion polymer batteries must be recycled or disposed of properly. Do not dispose of lithium-ion polymer batteries in municipal waste sites. VX 600 FOR THE IPHONE 3G/3GS INSTALLATION GUIDE3 V E R I F O N E C O N F I D E N T IA L R E V I S I O N A . 5 CONTENTS PREFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Conventions and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 CHAPTER 1 Device OverviewFeatures and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Exceptional Ease of Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Performance and Durability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Contactless Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Communication Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 CHAPTER 2 Device SetupSelecting a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Environmental Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Personal Security Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Electrical Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Unpacking the Shipping Carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Examining Device Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Front View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Back View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Power Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Micro-USB Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Installing/Removing an iPhone into the VX 600 . . . . . . . . . . . . . . . . . . . . . . . . . 16 Installing/Replacing MSAM Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Manual Startup and Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Connecting the VX 600 to a Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Connecting the iPhone to a Host Computer via Micro-USB . . . . . . . . . . . . . . . . 18 Battery Behavior (No Power Cable) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Conducting Wireless Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Using a Smart Card to Conduct Transactions (Optional) . . . . . . . . . . . . . . . . . . 20 Using the Magnetic Stripe Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Using the CTLS Reader (Optional). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Using the Barcode Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 CHAPTER 3 SpecificationsPower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 External Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 CHAPTER 4 MaintenanceCleaning the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . …

Text truncated - open the document above for the full version.

Date: 2010/10/20 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Product Certification Representative Authorization Letter FCC ID: B32VX600 Product name: Point of Sale Terminal To whom it may concern: We undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model VX600 to the FCC Rules and Regulations. Sporton International Inc. Address : No. 52, Hwa Ya 1st Road., Kwei-Shan Hsiang, TaoYuan Hsien Taiwan R.O.C. Name : Wayne Hsu Job Title : Vice Manager e-mail : [email protected] Also plesae be notice that I , Fanny Wong, have designated Chris Yu in VeriFone Inc.as the person who is being responsible for this project and to sign for other documents. We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 835(a). This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant :VeriFone Inc Address : 1400 West Stanford Ranch Road Suit 200, Rocklin, California, 95765, United States Signature : _________________________________ Name and Job Title. :Fanny Wong / Director E-mail :[email protected] Te l . :408-232-7252

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 1 Rev 2.0 SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw 10/27/2010 To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, SPORTON International Inc. hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product Name: Point of Sale Terminal Model Number: VX600 We affirm that between SIEMIC and SPORTON International Inc., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Signature: Name / title: Wayne Hsu / Vice Manager Contact information / address: No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. / Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw

Confidential Letter Date: 2010/10/19 Federal Communications Commission Authorization and Evaluation Division FCC ID：B32VX600 Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below: 1. Block Diagram 2. Circuit Diagram 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Applicant’s company name : VeriFone Inc Applicant’s company address : 1400 West Stanford Ranch Road Suit 200, Rocklin, California, 95765, United States Signature : _________________________________ Job Title and Dept. : Fanny Wong / Director E-mail : [email protected] Te l . : 408-232-7252

FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B1 OF B9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 09, 2010 FAX : 886-2-2696-2255 APPENDIX B. Photographs of EUT Scanner FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B2 OF B9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 09, 2010 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B3 OF B9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 09, 2010 FAX : 886-2-2696-2255

SIGNATURES REV.DWG.NO.SIZE TITLE DATE SCALE: SHEET DWN. ENG. CHK. OF 000 ECO# Cxxxxx 10/6/10 ALLEN_K2 LABEL VX600 PROD ID CE CUL ARTWORK, LBL087-002-01-AW 000 A4 AS NOTED VICTORIA_L1 ALLEN_K2 ALLEN_K2 10/6/10 10/6/10 10/6/10 THIS DOCUMENT IS THE PROPERTY OF VERIFONE, AND CONTAINS VERIFONE'S CONFIDENTIAL AND PROPRIETARY INFORMATION IN CONSIDERATION OF VERIFONE'S DISCLOSURE OF THIS DOCUMENT TO YOU, YOU AGREE THAT NEITHER IT, NOR THE INFORMATION CONTAINED THEREIN SHALL BE DISCLOSED TO OTHERS OR DUPLICATED, IN WHOLE OR IN PART, OR USED FOR ANY PURPOSES OTHER THAN AGREED TO BY VERIFONE, WITHOUT EXPRESS WRITTEN CONSENT OF VERIFONE. THIS ARTWORK IS THE PROPER TY OF VERIFONE. HANDLE WITH CARE AND RETURN TO VERIFONE VERY SOON AFTER USE. UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS. 11 REV.DESCRIPTIONDATEAPPROVED REVISIONS . 39 REF 2 2 . 5 R E F LBL087-002-01-A 200% 100% NOTES: BACKGROUND COLOR:PANTONE BLACK C LOGO AND TEXT: PANTONE 420C R Model: VX600 Rating:5VDC,1A FCC ID:B32VX600 IC:787C-VX600 San Jose, CA. USA LBL087-002-01-A LBL087-002-01-A R Model: VX600 Rating:5VDC,1A FCC ID:B32VX600 IC:787C-VX600 San Jose, CA. USA LBL087-002-01-A

FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B3 OF B9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 09, 2010 FAX : 886-2-2696-2255 RFID antenna FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B4 OF B9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 09, 2010 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B5 OF B9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 09, 2010 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B6 OF B9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 09, 2010 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B7 OF B9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 09, 2010 FAX : 886-2-2696-2255 FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B8 OF B9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 09, 2010 FAX : 886-2-2696-2255 RFID module FCC TEST REPORT SPORTON International Inc. PAGE NUMBER : B9 OF B9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 09, 2010 FAX : 886-2-2696-2255

SPORTON INTERNATIONAL INC. Page Number : 1 of 38 TEL : 886-3-327-3456 Report Issued Date : Dec. 23, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : B32VX600 FCC SAR Test Report Report No. : FA092829-01B FCC SAR Test Report APPLICANT : VeriFone, Inc. EQUIPMENT : Point of Sale Terminal BRAND NAME : VeriFone MODEL NAME : VX600 FCC ID : B32VX600 STANDARD : FCC 47 CFR Part 2 (2.1093) IEEE C95.1-1991 IEEE 1528-2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) The product was attached to Apple iPhone 3G (FCC ID: BCGA1241), 3GS Type A (FCC ID: BCGA1303A), and 3GS Type B (FCC ID: BCGA1303B) during SAR test in this report. The product was received on Dec. 16, 2010 and completely tested on Dec. 21, 2010. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Roy Wu / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 2 of 38 TEL : 886-3-327-3456 Report Issued Date : Dec. 23, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : B32VX600 FCC SAR Test Report Report No. : FA092829-01B Table of Contents Revision History .................................................................................................................................................................3 1. Statement of Compliance ...........................................................................................................................................4 2. Administration Data ....................................................................................................................................................5 2.1 Testing Laboratory .............................................................................................................................................5 2.2 Applicant ............................................................................................................................................................5 2.3 Manufacturer .....................................................................................................................................................5 2.4 Application Details .............................................................................................................................................5 3. General Information ....................................................................................................................................................6 3.1 Description of Device Under Test (DUT) ............................................................................................................6 3.2 Product Photos ..................................................................................................................................................7 3.3 Applied Standards .............................................................................................................................................7 3.4 Device Category and SAR Limits ......................................................................................................................7 3.5 Test Conditions ..................................................................................................................................................7 3.5.1 Ambient Condition ...................................................................................................................................7 3.5.2 Test Configuration ....................................................................................................................................8 4. Specific Absorption Rate (SAR) ...............................................................................................................................12 4.1 Introduction ......................................................................................................................................................12 4.2 SAR Definition .................................................................................................................................................12 5. SAR Measurement System .......................................................................................................................................13 5.1 E-Field Probe...................................................................................................................................................14 5.1.1 E-Field Probe Specification ...................................................................................................................14 5.1.2 E-Field Probe Calibration .......................................................................................................................15 5.2 Data Acquisition Electronics (DAE) ..................................................................................................................15 5.3 Robot ...............................................................................................................................................................15 5.4 Measurement Server .......................................................................................................................................16 5.5 Phantom ..........................................................................................................................................................17 5.6 Device Holder ..................................................................................................................................................18 5.7 Data Storage and Evaluation ...................…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. Page Number : A1 of A1 TEL : 886-3-327-3456 Report Issued Date : Dec. 23, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : B32VX600 FCC SAR Test Report Report No. : FA092829-01B Appendix A. Plots of System Performance Check The plots are shown as follows. Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2010/12/17 System Check_Head_2450MHz_101217 DUT: Dipole 2450 MHz Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450_101217 Medium parameters used: f = 2450 MHz; σ = 1.85 mho/m; ε r = 39.3; ρ = 1000 kg/m 3 Ambient Temperature：22.5 °C; Liquid Temperature：21.3 °C DASY4 Configuration: - Probe: ET3DV6 - SN1787; ConvF(4.5, 4.5, 4.5); Calibrated: 2010/5/18 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn577; Calibrated: 2010/8/18 - Phantom: SAM-Left; Type: QD 000 P40 C; Serial: TP-1477 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=100mW/Area Scan (91x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 5.60 mW/g Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 57.4 V/m; Power Drift = -0.008 dB Peak SAR (extrapolated) = 10.4 W/kg SAR(1 g) = 4.91 mW/g; SAR(10 g) = 2.31 mW/g Maximum value of SAR (measured) = 5.54 mW/g 0 dB = 5.54mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2010/12/21 System Check_Head_2450MHz_101221 DUT: Dipole 2450 MHz Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450_101221 Medium parameters used: f = 2450 MHz; σ = 1.84 mho/m; ε r = 38.2; ρ = 1000 kg/m 3 Ambient Temperature：22.3 °C; Liquid Temperature：21.6 °C DASY4 Configuration: - Probe: ET3DV6 - SN1787; ConvF(4.5, 4.5, 4.5); Calibrated: 2010/5/18 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn577; Calibrated: 2010/8/18 - Phantom: SAM-Right; Type: QD 000 P40 C; Serial: TP-1383 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=100mW/Area Scan (91x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 5.91 mW/g Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 58.4 V/m; Power Drift = -0.025 dB Peak SAR (extrapolated) = 10.7 W/kg SAR(1 g) = 5.08 mW/g; SAR(10 g) = 2.39 mW/g Maximum value of SAR (measured) = 5.73 mW/g 0 dB = 5.73mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2010/12/17 System Check_Body_2450MHz_101217 DUT: Dipole 2450 MHz Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: MSL_2450_101217 Medium parameters used: f = 2450 MHz; σ = 1.97 mho/m; ε r = 52.8; ρ = 1000 kg/m 3 Ambient Temperature：22.5 °C; Liquid Temperature：21.4 °C DASY4 Configuration: - Probe: ET3DV6 - SN1787; ConvF(4.03, 4.03, 4.03); Calibrated: 2010/5/18 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn577; Calibrated: 2010/8/18 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=100mW/Area Scan (91x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 6.47 mW/g Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 58.0 V/m; Power Drift = -0.016 dB Peak SAR (extrapolated) = 13.5 W/kg SAR(1 g) = 5.62 mW/g; SAR(10 g) = 2.56 mW/g Maximum value of SAR (measured) = 6.22 mW/g 0 dB = 6.22mW/g Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2010/12/21 System Check_Body_2450MHz_101221 DUT: Dipole 2450 MHz Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: MSL_2450_101221 Medium parameters used: f = 2450 MHz; σ = 1.96 mho/m; ε r = 52.9; ρ = 1000 kg/m 3 Ambient Temperature：22.4 °C; Liquid Temperature：21.5 °C DASY4 Configuration: - Probe: ET3DV6 - SN1787; ConvF(4.03, 4.03, 4.03); Calibrated: 2010/5/18 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn577; Calibrated: 2010/8/18 - Phantom: ELI 4.0_Front; Type: QDOVA001BB; Serial: 1026 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=100mW/Area Scan (91x91x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (interpolated) = 6.44 mW/g Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 58.0 V/m; Power Drift = -0.016 dB Peak SAR (extrapolated) = 13.5 W/kg SAR(1 g) = 5.59 mW/g; SAR(10 g) = 2.55 mW/g Maximum value of SAR (measured) = 6.18 mW/g 0 dB = 6.18mW/g SPORTON INTERNATIONAL INC. Page Number : B1 of B1 TEL : 886-3-327-3456 Report Issued Date : Dec. 23, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : B32VX600 FCC SAR Test Report Report No. : FA092829-01B Appendix B. Plots of SAR Measurement The plots are shown as follows. Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2010/12/21 802.11b_Left Cheek_Ch6_iPhone 3G_Big-File-Transfer SAR DUT: 092829-01 Communication System: 802.11b ; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: HSL_2450_101221 Medium parameters used: f = 2437 MHz; σ = 1.83 mho/m; ε r = 38.2; ρ = 1000 kg/m 3 Ambient Temperature：22.6 °C; Liquid Temperature：21.6 °C DASY4 Configuration: - Probe: ET3DV6 - SN1787; ConvF(4.5, 4.5, 4.5); Calibrated: 2010/5/18 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn577; Calibrated: 2010/8/18 - Phantom: SAM-Right; Type: QD 000 P40 C; Serial: TP-1383 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Ch6/Area Scan (51x91x1): Measurement grid: dx=20mm, dy=20mm Maximum value of SAR (interpolated) = 0.551 mW/g Ch6/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 12.5 V/m; Power Drift = -0.149 dB Peak SAR (extrapolated) = 1.03 W/kg SAR(1 g) = 0.430 mW/g; SAR(10 g) = 0.194 mW/g Maximum value of SAR (measured) = 0.479 mW/g 0 dB = 0.479mW/g Test Laboratory: Sporton Int…

Text truncated - open the document above for the full version.

SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY Dipole Verification Model / SN : D2450V2 / 736 Verification Date : Dec. 01, 2010 Antenna Parameters with Head TSL Impedance, Transformed to Feed Point 46.51Ω - 3.06jΩ (50±5Ω) Return Loss -25.97 dB (<= -20 dB) SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY Antenna Parameters with Body TSL Impedance, Transformed to Feed Point 51.39Ω - 3.72jΩ (50±5Ω) Return Loss -28.15 dB (<= -20 dB) SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY SPORTON INTERNATIONAL INC. Calibration Certificate of DASY

SPORTON INTERNATIONAL INC. Page Number : D1 of D3 TEL : 886-3-327-3456 Report Issued Date : Dec. 23, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : B32VX600 FCC SAR Test Report Report No. : FA092829-01A Appendix D. Product Photos <VeriFone / VX600> <Apple iPhone 3G> <Apple iPhone 3GS Type A> WWAN Ant WWAN Ant WLAN / BT Ant WLAN / BT Ant 8 cm 7.5 cm SPORTON INTERNATIONAL INC. Page Number : D2 of D3 TEL : 886-3-327-3456 Report Issued Date : Dec. 23, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : B32VX600 FCC SAR Test Report Report No. : FA092829-01A <Apple iPhone 3GS Type B> <VX600 + iPhone> WWAN Ant WLAN / BT Ant 7.5 cm Horizontal Vertical SPORTON INTERNATIONAL INC. Page Number : D3 of D3 TEL : 886-3-327-3456 Report Issued Date : Dec. 23, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : B32VX600 FCC SAR Test Report Report No. : FA092829-01A Antenna Location : RFID Antenna SPORTON INTERNATIONAL INC. Page Number : E1 of E1 TEL : 886-3-327-3456 Report Issued Date : Dec. 23, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : B32VX600 FCC SAR Test Report Report No. : FA092829-01A Appendix E. Test Setup Photos Sample 1 <VX600 + iPhone 3G> Right Cheek Right Tilted Left Cheek Left Tilted Front Face of the DUT with Phantom 1 cm Gap Rear Face of the DUT with Phantom 1 cm Gap SPORTON INTERNATIONAL INC. Page Number : E2 of E4 TEL : 886-3-327-3456 Report Issued Date : Dec. 23, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : B32VX600 FCC SAR Test Report Report No. : FA092829-01A Right Side of the DUT with Phantom 1 cm Gap Left Side of the DUT with Phantom 1 cm Gap Bottom Side of the DUT with Phantom 1 cm Gap SPORTON INTERNATIONAL INC. Page Number : E3 of E4 TEL : 886-3-327-3456 Report Issued Date : Dec. 23, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : B32VX600 FCC SAR Test Report Report No. : FA092829-01A Sample 2 <VX600 + iPhone 3GS Type A> Right Cheek Right Tilted Left Cheek Left Tilted Front Face of the DUT with Phantom 1 cm Gap Rear Face of the DUT with Phantom 1 cm Gap SPORTON INTERNATIONAL INC. Page Number : E4 of E4 TEL : 886-3-327-3456 Report Issued Date : Dec. 23, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : B32VX600 FCC SAR Test Report Report No. : FA092829-01A Right Side of the DUT with Phantom 1 cm Gap Left Side of the DUT with Phantom 1 cm Gap Bottom Side of the DUT with Phantom 1 cm Gap

SPORTON INTERNATIONAL INC. Page Number : 1 of 36 TEL : 886-3-327-3456 Report Issued Date : Dec. 23, 2010 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : B32VX600 FCC SAR Test Report Report No. : FA092829-01A FCC SAR Test Report APPLICANT : VeriFone, Inc. EQUIPMENT : Point of Sale Terminal BRAND NAME : VeriFone MODEL NAME : VX600 FCC ID : B32VX600 STANDARD : FCC 47 CFR Part 2 (2.1093) IEEE C95.1-1991 IEEE 1528-2003 FCC OET Bulletin 65 Supplement C (Edition 01-01) The product can be used for combine with Apple iPhone 3G (FCC ID: BCGA1241) or 3GS Type A (FCC ID: BCGA1303A) or 3GS Type B (FCC ID: BCGA1303B). Because the difference between 3GS Type A and 3GS Type B is only vendors of the WiFi/Bluetooth module. The WWAN SAR testing was performed on the device attached to iPhone 3G Type A for both models, Type A and Type B. Therefore, the device was attached to Apple iPhone 3G and 3GS Type A during SAR test in this report. The product was received on Dec. 16, 2010 and completely tested on Dec. 20, 2010. We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and shown the compliance with the applicable technical standards. The test results in this report apply exclusively to th…

Text truncated - open the document above for the full version.