B4SCM19AWireless Computer Interface/ Transceiver

X10.com, a Div. of X10 Wireless Technology, Inc. 1-800-675-3044 [email protected] CM19A-5/01 Right-click on a label to type in the name of the light or appliance this button controls. Click to change the Housecode setting (set it to the same letter as your TM751 and X10 Modules). Click to control X10 Modules set to 1 thru 8 or 9 thru 16. Click to turn X10 Module on or off. Then click to dim or brighten Lamp or Wall Switch Modules. 1. Set the TM751 Transceiver to Housecode A. Plug a lamp or appliance into the TM751. Plug the TM751 into an AC outlet (use one near your PC for now). 2. Download the X10 PalmPad software from: www.x10.com/software. 3. Install the software as per its instructions. At the appropriate point you will be instructed to plug in the CM19A. 4. Plug the CM19A into your computer’s USB port. 5. Follow the instructions to complete the installation. 6. Run the X10 PalmPad application. A picture of an X10 PalmPad remote appears on your computer monitor. Use the on-screen remote control just like a regular remote control: Click on 1 to test the Transceiver. For more information right-click the PalmPad to access the extensive on-line help. You can also print labels from here to match those on the on-screen PalmPad remote and place them on a physical PalmPad (sold separately). You can also turn on or off sound effects that occur when you press buttons. Persons with physical disabilities who have software that can access their keyboard can simply “type” A 1 ON, for example, to turn on any X10 Module or wireless camera. Wireless Computer Inter face/Transceiver
Controls up to 256 lights, appliances, and/or cameras instantly from your PC, by remote control.
Works with the TM751 Transceiver and X10 Modules (sold separately).
Works with X10’s PalmPad software (available from www.x10.com/software).
Connects to your PC’s USB port for easy installation.
Up to 50 ft. range. Model CM19 A The CM19A Computer Interface sends Wireless Radio Frequency (RF) signals from your PC to a TM751 Transceiver. The Transceiver then passes the signals onto your house wiring to control lights, appliances, and/or X10 wireless cameras around your home. You plug lights and appliances into X10 Modules (sold separately). The CM19A is also a wireless receiver so you can tell your PC, from any X10 remote control, what cameras you want it to control. F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. LIMITED 1-YEAR WARRANTY X10.com, a divisions of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free from defective material and workmanship for a period of one (1) year from the original date of purchase at retail. X10 agrees to repair or replace, at it’s sole discretion, a defective X10 product if returned to X10 within the warranty period and with proof of purchase. If service is required under this warranty: 1. Call 1-800-675-3044 or e-mail [email protected] for details on how to return your unit(s). 2. Enclose a check for $4.00 for postage and handling. 3. Enclose a dated proof of purchase. 4. X10 is not responsible for shipping damage. Units to be returned should be packed carefully. 5. For additional warranty information, contact X10.

To:Commission Reviewer From:Richard King Certification Department Coordinator Elite Electronic Engineering RE:FCC ID B4SCM19A Applicant:X-10 USA, Inc. Corr. Ref. #: 731 Confirm. #: Date: In reference to a request for certification from X-10 USA, Inc Elite performed a certification of the above referenced product manufactured by X-10 USA, Inc. Deficiencies were discovered during the certification process. The noted deficiencies were addressed in correspondence between the appropriate test facilities and Elite Electronic Engineering. The correspondence is indicated below. Questions from Elite dated May 29 and June 5, 2001. 1. Exhibit D Users Manual. The users manual contains the following statement “ FCC Approved ”. Pursuant to FCC rules 2.927 (c) “No person shall, in any advertising matter, brochure, etc., use or make reference to an equipment authorization in a deceptive or misleading manner or convey the impression that such equipment authorization reflects more than a Commission determination that the device or product has been show n to be capable of compliance with the applicable technical standards of the Commission’s rules.” Please remove the above statement from the users manual and resubmit the exhibit. 2. Exhibit E The test measurement report submitted to Elite for the X-10 Model CM19A Wireless Computer Interface /Transceiver was missing the test measurement data indicated in the following .pdf files appears to be missing. Cedata.pdf indicates 2 pages with only 1 page showing Dutycycle.pdf indicates 3 pages with only 2 pages showing REfundharm.pdf indicates 4 pages with only 2 pages showing Please submit new exhibits. Comments: Responses to questions were proper and satisfactory with new exhibits submitted for all certification was granted. Richard King

USB Wireless Transceiver Model CM19A CM19A rating label 2:1 05/16/01 FCC ID: B4SCM19A x10.com, a division of X10 Wireless Technology, Inc. 1-800-675-3044

CM19A description 310 MHz transmissions are received via the superregenerative receiver, demodulated, and passed to the microprocessor, which passes the commands via USB to software running in a PC. The PC software allows the user to click a button on a picture of a remote control on the computer screen to send a command. These commands are passed via USB to the microprocessor which passes them to the 310 Mhz modulator for RF transmission at 310 MHz.

Retlif Testing Laboratories R Test Report No. R-9012-1 FCC ID: B4SCM19A APPLICANT X-10 (USA), Inc. 91 Ruckman Road Closter, NJ 07624-0420 MANUFACTURER X-10 Electronics Shenzhen Co. Ltd. X-10 Building Labour Industrial District Shenzhen, Xixiang, Bao An Guang Dong, China, 518102 TEST SPECIFICATION:FCC Rules and Regulations Part 15, Subpart C, Para. 15.231 TEST PROCEDURE:ANSI C63.4:1992 TEST SAMPLE DESCRIPTION BRANDNAME: X-10 (USA), Inc. MODEL: CM19A TYPE: Pulsed Transmitter POWER REQUIREMENTS: +5 VDC derived from Host PC via USB FREQUENCY OF OPERATION: 312 MHz TESTS PERFORMED Para. 15.207(a), Conducted Emissions Para. 15.231(a), Radiated Emissions, Fundamental and Harmonics Para. 15.231(b), Radiated Emissions, Spurious Case Para. 15.231(b), Duty Cycle Determination Para. 15.231(c), Occupied Bandwidth REPORT OF MEASUREMENTS Applicant: X-10 (USA), Inc. Device:Pulsed Transmitter FCC ID: B4SCM19A Power Requirements: +5 VDC derived from Host PC via USB Applicable Rule Section:Part 15, Subpart C, Section 15.231 Retlif Testing Laboratories R Test Report No. R-9012-1 FCC ID: B4SCM19A Retlif Testing Laboratories R Test Report No. R-9012-1 FCC ID: B4SCM19A TEST RESULTS 15.207(a):The radio frequency voltage that was conducted back on to the AC power line on any frequency/frequencies within the bandwidth of 450kHz to 30MHz did not exceed 250 microvolts. 15.231 (a):This device is used as a remote control transmitter. 15.231 (a)(1) &The transmitter is manually operated and ceases transmission within 5 15.231(a)(2):seconds after deactivation. 15.231 (a)(3):The transmitter does not perform periodic transmissions. 15.231 (b):The fundamental field strength did not exceed 5920 μV/M (Average) at a test distance of 3 meters. In addition, the requirements of section 15.35 for averaging pulsed emissions and for limiting peak emissions were met. The field strength of harmonic and spurious emissions did not exceed 592 μV/M (AVERAGE). DETERMINATION OF FIELD STRENGTH LIMITS The field strength limits shown below are found in Section 15.231. Frequency Limit F1=2603750=L1 Fo=312Lo F2=47012500=L2 The formula below was utilized to determine the limits: Limit = L1 + [(Fo-F1)(L2-L1)/(F2-F1)] Solving yields: Fundamental Limit= 5920 μV/M (AVERAGE) @ 3 Meters Harmonic Limit= 592 μV/M (AVERAGE) @ 3 Meters Retlif Testing Laboratories R Test Report No. R-9012-1 FCC ID: B4SCM19A DUTY CYCLE DETERMINATION The unit’s RF output was directly coupled to the input of the spectrum analyzer. The analyzer was set for a frequency span of 0Hz. The sweep time was then adjusted in order to display one full pulse train. The transmitter on time was then summed and compared to the time for one full cycle in order to obtain the duty cycle.( See plots for additional information) Transmitter On Time=31.125 milliseconds (maximum- worst case in 100 ms) Transmitter Cycle Time=94.5 Transmitter Duty Cycle=32.9 % CALCULATION: 1 Large Pulse = 10.5 milliseconds 33 x 625 μs (small pulse)= 20.625 milliseconds 10.5 + 20.625= 32.9 milliseconds Duty Cycle=32.9 % Correction Factor = 20 log(0.248) =-9.6 SPECTRUM ANALYZER DESENSITIZATION CONSIDERATIONS Due to the nature of the emissions being measured, care was taken to ensure that the resolution bandwidth of the spectrum analyzer was adequate to provide accurate measurements. The following formula was utilized: Setting pulse desensitization equal to zero and utilizing the minimum observed pulse width of 20μs yields a minimum required bandwidth of 33.3 kHz. FCC specified bandwidths of 100kHz and 1MHz were utilized below and above 1GHz, respectively. Retlif Testing Laboratories R Test Report No. R-9012-1 FCC ID: B4SCM19A 1.All readings were taken utilizing a peak detector function at a test distance of 3 meters. 2.The duty cycle was applied to the peak readings in order to determine the average value of the emissions. 3.The frequency range was scanned from 30 MHz to 3.1 GHz. All emissions not reported were more than 20 dB below the specified limit. Retlif Testing Laboratories R Test Report No. R-9012-1 FCC ID: B4SCM19A FCC15.231 Compliance Testing ENTypeManufacturerDescriptionModel No.Cal DateDue Date 067Open Area Test SiteRetlif3 MeterRNY9/20/009/20/03 076LISNSolar Electronics10 kHz - 30 MHz8012-50-R-24BNC2/9/012/9/02 088AConical Log SpiralElectro-Mechanics200 MHz - 1 GHz31011/3/011/3/02 128CDouble Ridge GuideEaton Corporation1 GHz - 18 GHz960019/18/009/18/01 133Broadband Pre-AmplifierElectro-Metrics10 kHz - 1 GHz, 26dBBPA-10006/13/00 6/13/01 141AGraphics PlotterHewlett PackardN/A7470A3/5/013/5/02 202Transient LimiterHewlett Packard.009 MHz - 200 MHz11947A7/24/00 7/24/01 206B6.0 dB AttenuatorTexscan0 - 1.0 GHzFP-50 - 6 dB6/13/006/13/01 338ASignal GeneratorHewlett Packard500 kHz - 1024 MHz8640B7/28/00 7/28/01 456LISNSolar ElectronicsDC - 60 Hz9409-50-R-247/26/007/26/01 523BiconilogElectro-Mechanics26 - 2000 MHz3142B6/8/006/8/01 543PreamplifierHewlett Packard1.0 GHz - 26.5 GHz8449B6/16/996/16/01 617Interference AnalyzerElectro-Metrics10 kHz - 1 GHzEMC-302/27/012/27/02 7016EMC AnalyzerHewlett Packard9kHz - 1.8GHz8591EM3/6/013/6/02 712EMI Test ReceiverRohde & Schwarz20 Hz - 26.5 GHzESI263/1/006/1/01 Retlif Testing Laboratories R Test Report No. R-9012-1 FCC ID: B4SCM19A FCC 15.207(a) Conducted Emissions Please refer to separate electronic file named cedata.pdf Retlif Testing Laboratories R Test Report No. R-9012-1 FCC ID: B4SCM19A FCC 15.231(b) RADIATED EMISSIONS, FUNDAMENTAL & SPURIOUS CASE See separate e-file attachment named REfundharm.pdf and REspur.pdf Retlif Testing Laboratories R Test Report No. R-9012-1 FCC ID: B4SCM19A FCC 15.231(c) OCCUPIED BANDWIDTH Please refer to separate electronic file named Occbw.pdf Retlif Testing Laboratories R Test Report No. R-9012-1 FCC ID: B4SCM19A FCC 15.231(c) DUTY CYCLE Please refer to separate electronic file named Dutycycle.pdf Retlif Testing Laboratories R Test Report No. R-9012-1 FCC ID: B4SCM19A Retlif Testing Laboratories R Data Sheet 1 of 4 Test Method: FCC Part 15 Subp…

Text truncated - open the document above for the full version.