B4SOR24PC remote control

OR24-141105 Set Up and Operating Instructions for OR24 Remote Control Install batteries: Open the battery compartment on the back of the remote and insert 2 AAA alkaline batteries (not supplied). Observe polarity. Operation Press LIVE TV, Rec TV, Photo, Audio, Music, DVD menu or Video to access desired function. Follow the on-screen prompts and select help from the on-screen menu for more information. F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. This equipment generates and uses radio frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturers instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for remote control security devices in accordance with the specifications in Sub-Part B of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by unplugging the equipment, try to correct the interference by one or more of the following measures. • Reorient the antenna of the radio/TV experiencing the interference. • Relocate the product with respect to the radio/TV. • Move the product away from the radio/TV. • Plug the product into an outlet on a different electrical circuit from the radio/TV experiencing the interference. If necessary, consult your local dealer for additional suggestions. NOTE: NO CHANGES OR MODIFICATIONS MAY BE MADE TO THE UNITS. ANY CHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. Hereby, Medion declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. ® 0536

X10 France – 3 Rue de Penthièvre – 75008 Paris France Tel : +33 1 53 30 80 70 Fax : +33 1 53 30 80 75 E-mail : [email protected] Website : http://www.x10europe.com Paris, 20 of December 2005 We, X10 France 3 Rue de Pentièvre 75008 Paris France, are requesting confidentiality on the following files: - Schematics OR24 remote SCH (file size: 124 558) - Schematics OR24 remote PCB (file size: 252 021) - Parts List BOM NB remote (file size: 21 409) - Block Diagram (file size: 49 327) This project is an OEM development and the schematics, parts list and block diagram should be kept confidential . François Rossi Technical manager

OR24 Remote Control

Made in China by X10 P/N: 2003 0310 REMOTE CONTROL FCC ID: B4SOR24 2x1.5V AAA R03/LR03 Print black text on clear background OR24 Remote Control rating label 30mm 20mm

OR24 Remote Control

OR24 Remote Control

OR24 Remote Control

OR24 Operational Description The OR24 is a 433.92 MHz pulsed RF transmitter remote control. The RF remote is used in conjunction with a software installed on a remote PC. The remote can activate various audio/video functions in the remote PC through an RF receiver that is connected to the PC’s USB port. The remote control’s internal MCUs receive information from the keypad and convert the keystrokes into a pulse code. The pulse code is then sent to the 433.92 MHz RF transmitter and is used to pulse modulate the 433.92 MHz carrier.

EMITECH ATLANTIQUE 15, rue de la Claie Z.I. Angers-Beaucouzé 49070 BEAUCOUZÉ Tél. 02 41 73 26 27 Fax 02 41 73 26 40 e-mail : [email protected] R.C.S. ANGERS 95 B 543 SIRET 344 545 645 00055 SIEGE SOCIAL : EMITECH S.A. 3, rue des Coudriers – Z.A. de l’Observatoire – 78180 MONTIGNY-LE-BRETONNEUX – Tél. 01 30 57 55 55 – Fax 01 30 43 74 48 S.A. AU CAPITAL DE 480 000 € - R.C. VERSAILLES B 344 545 645 – SIRET 344 545 645 000 22 – CODE APE 742 C RA-05-24419-1/A Ed. 0 FCC CERTIFICATION RADIO Measurement Technical Report standard to apply: FCC Part 15.231 Equipment under test: REMOTE CONTROL OR24 FCC ID: B4SOR24 Company: X-10 France DISTRIBUTION: Mr ROSSI Company: X-10 France Number of pages: 18 including 4 annexes Technical Verification Ed. Date ModifiedWritten by Quality Approval pages Name Visa Name Visa 0 20-Oct-05 Creation L. BERTHAUD Duplication of this test report is only permitted for an integral photographic facsimile. It includes the number of pages referenced here above. This document is the result of testing a specimen or a sample of the product submitted. It does not imply an assessment of the conformity of the whole manufactured products of the tested sample. EMITECH ATLANTIQUE RA-05-24419-1/A Ed. 0 PAGE: 2 RA-05-24419-1-A-ST PRODUCT: REMOTE CONTROL Reference / model : OR24 Serial number : not communicated MANUFACTURER: X-10 Together Rich Industrial Park B, Sanwei Industrial District, Xixiang Town Shenzhen (China) COMPANY SUBMITTING THE PRODUCT: Company : X-10 France Address : 3, rue de Penthièvre 75008 PARIS FRANCE Responsible : Mr ROSSI DATE(S) OF TEST: 18 and 19 October 2005 TESTING LOCATION: EMITECH ATLANTIQUE open area test site in LA POUEZE (49) FRANCE Registration Number by FCC: 101696/FRN: 0006 6490 08 TESTED BY: L. BERTHAUD EMITECH ATLANTIQUE RA-05-24419-1/A Ed. 0 PAGE: 3 RA-05-24419-1-A-ST CONTENTS TITLE PAGE 1. INTRODUCTION.......................................................................................................................... 4 2. PRODUCT DESCRIPTION .........................................................................................................4 3. NORMATIVE REFERENCE....................................................................................................... 4 4. TEST METHODOLOGY .............................................................................................................5 5. TEST UNIT CONFIGURATION ................................................................................................ 5 6. TESTS AND CONCLUSIONS ..................................................................................................... 6 7. RADIATED EMISSION LIMITS; GENERAL REQUIREMENTS (TRANSMITTER) ...... 7 ANNEX 1: PHOTOS OF THE EQUIPMENT UNDER TEST ..................................................... 9 ANNEX 2: OPEN AREA TEST SITE, TEST SET UP ................................................................ 13 ANNEX 3: EMISSION BANDWIDTH.......................................................................................... 15 ANNEX 4: DUTY CYCLE DETERMINATION.......................................................................... 16 EMITECH ATLANTIQUE RA-05-24419-1/A Ed. 0 PAGE: 4 RA-05-24419-1-A-ST 1.INTRODUCTION This document presents the result of RADIO test carried out on the following equipment: REMOTE CONTROL OR24 in accordance with normative reference. 2.PRODUCT DESCRIPTION ITU Emission code: 200 KL1D Class: B (residential environment) Intermittent control signals with no continuous transmission, the transmitter operates only when a key is depressed. Utilization: universal remote control Antenna type: internal antenna Operating frequency: 433.92 MHz No of channels: 1 Channel spacing: not concerned Frequency generation: ~ SAW Resonator | Crystal | Synthetiser Modulation: ~ Amplitude (pulsed modulated device) | Digital | Frequency | Phase Power source: alkaline batteries LR03 (2 x 1.5 V) Power level, frequency range and channels characteristics are not user adjustable. The details pictures of the product and the circuit boards are joined with this file. 3.NORMATIVE REFERENCE The standards and testing methods related throughout this report are those listed below. They are applied on the whole test report even though the extensions (version, date and amendment) are not repeated. FCC Part 15 (2005) Code of Federal Regulations Title 47 - Telecommunication Chapter 1 - Federal Communications Commission Part 15 - Radio frequency devices Subpart C - Intentional Radiators ANSI C63.4 (01) American National Standard for Methods of measurement of Radio- Noise from low-voltage. Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. EMITECH ATLANTIQUE RA-05-24419-1/A Ed. 0 PAGE: 5 RA-05-24419-1-A-ST 4.TEST METHODOLOGY Radio performance tests procedures given in part 15: Paragraph 203: antenna requirement (Subpart C intentional Radiators) Paragraph 205: restricted bands of operation (Subpart C intentional Radiators) Paragraph 209: radiated emission limits; general requirements (Subpart C intentional Radiators) Paragraph 231: periodic operation in the band 40.66 – 40.7 MHz and above 70 MHz (Subpart C intentional Radiators) Paragraph 33: frequency range of radiated measurements Paragraph 35: measurement detector functions and bandwidths 5.TEST UNIT CONFIGURATION JOINED DOCUMENTATIONS SSynopticS SBlock diagramS SExternal photos and Product labelingS SAssembly of componentsS SInternal photosS SLayout pcbS SBil of materialsS SSchematicsS SProduct descriptionS SUser guideS EMITECH ATLANTIQUE RA-05-24419-1/A Ed. 0 PAGE: 6 RA-05-24419-1-A-ST 6.TESTS AND CONCLUSIONS Test Description of test Criteria respected ? Comment procedure Yes No NAp NAs FCC Part 15.203 ANTENNA REQUIREMENT X Note 1 FCC Part 15.205 RESTRICTED BANDS OF OPERATION X FCC Part 15.231 PERIODIC OPERATION IN THE BAND 40.66 – 40.7 MHz and above 70 MHz a) X Note 2 b) X Notes 3 and 5 c) X Note 4 d) X e) X NAp: Not Applicable NAs: Not Asked Note 1 : internal anten…

Text truncated - open the document above for the full version.

EMITECH ATLANTIQUE A2-RA-05-24419-1/A Ed. 0 PAGE: 13 RA-05-24419-1-A-ST ANNEX 2: OPEN AREA TEST SITE, TEST SET UP EMITECH ATLANTIQUE A2-RA-05-24419-1/A Ed. 0 PAGE: 14 RA-05-24419-1-A-ST TEST SET UP

EMITECH ATLANTIQUE A1-RA-05-24419-1/A Ed. 0 PAGE: 9 RA-05-24419-1-A-ST ANNEX 1: PHOTOS OF THE EQUIPMENT UNDER TEST GENERAL VIEW EMITECH ATLANTIQUE A1-RA-05-24419-1/A Ed. 0 PAGE: 10 RA-05-24419-1-A-ST Printed circuit board: face 1 Printed circuit board: face 2 EMITECH ATLANTIQUE A1-RA-05-24419-1/A Ed. 0 PAGE: 11 RA-05-24419-1-A-ST Radio module: face 1 EMITECH ATLANTIQUE A1-RA-05-24419-1/A Ed. 0 PAGE: 12 RA-05-24419-1-A-ST Radio module: face 2 EMITECH ATLANTIQUE A2-RA-05-24419-1/A Ed. 0 PAGE: 13 RA-05-24419-1-A-ST ANNEX 2: OPEN AREA TEST SITE, TEST SET UP EMITECH ATLANTIQUE A2-RA-05-24419-1/A Ed. 0 PAGE: 14 RA-05-24419-1-A-ST TEST SET UP EMITECH ATLANTIQUE A3-RA-05-24419-1/A Ed. 0 PAGE: 15 RA-05-24419-1-A-ST ANNEX 3: EMISSION BANDWIDTH EMITECH ATLANTIQUE A4-RA-05-24419-1/A Ed. 0 PAGE: 16 RA-05-24419-1-A-ST ANNEX 4: DUTY CYCLE DETERMINATION EMITECH ATLANTIQUE A4-RA-05-24419-1/A Ed. 0 PAGE: 17 RA-05-24419-1-A-ST EMITECH ATLANTIQUE A4-RA-05-24419-1/A Ed. 0 PAGE: 18 RA-05-24419-1-A-ST

EMITECH ATLANTIQUE A2-RA-05-24419-1/A Ed. 0 PAGE: 13 RA-05-24419-1-A-ST ANNEX 2: OPEN AREA TEST SITE, TEST SET UP EMITECH ATLANTIQUE A2-RA-05-24419-1/A Ed. 0 PAGE: 14 RA-05-24419-1-A-ST TEST SET UP