B4SVT46AWireless Audio/Video sender w/ IR Extender Feature

C AT . N O . 15-2572 W W W W W IRELESS IRELESS IRELESS IRELESS IRELESS A A A A A UDIO UDIO UDIO UDIO UDIO /V /V /V /V /V IDEO IDEO IDEO IDEO IDEO S S S S S ENDER ENDER ENDER ENDER ENDER with IR Extender Feature S ENDER 15-2572T OWNER’S MANUAL S ENDER 15-2572T 3 2 FCC C AUTION THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING TWOCONDITIONS:(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSEUNDESIRED OPERATION. NOTE: Modifications to this product will void the user’s authority to operate this equipment. I NTRODUCTION Your Wireless Audio/Video Sender system consists of a Sender unit whichyou connect to your satellite receiver, DVD player, etc., and a Receiverunit that you connect to a TV anywhere in your home. The Audio/VideoSender converts the A/V signal from your A/V product into a 2.4 GHzwireless Radio Frequency (RF) signal and transmits it (even through walls)to the Audio/Video Receiver unit. The Audio/Video Receiver converts thesignal back to an A/V signal and passes it through a cable to your TV’sCOAX input, or A/V input jacks.The Audio/Video Sender system also includes an IR Extender feature. Thislets you remotely control the A/V product that the Sender is connected to,from the location where the Receiver is located. For example, you cancontrol a DVD Player in your living room, while watching it on a TV inyour bedroom.There are just a few simple steps to follow to hook up your Audio/VideoSender system to a satellite receiver, VCR, DVD Player, or Cable Box. C ONTENTS I NTRODUCTION ........................................................................ 3 C ONTROLS AND C ONNECTIONS .................................................. 4 S ENDER ............................................................................ 4 R ECEIVER .......................................................................... 5 C ONNECTING U P ..................................................................... 6 H OOKING UP THE S ENDER .................................................... 6 H OOKING UP THE R ECEIVER ................................................. 8 F INE TUNING YOUR S YSTEM .................................................... 10 IR E XTENDER F EATURE ......................................................... 11 5 4 DC 6V CHANNEL ONOFF TV CHANNEL 34 ONOFF CHANNEL RF Antenna(for use with the IRExtender feature) Power Supply Jack 2.4 GHz Antenna 2.4 GHz Channel Switch A/V In Jacks 2.4 GHz ChannelSwitch (underneath2.4 GHz Antenna). C ONTROLS AND C ONNECTIONS Audio/Video Receiver Audio/Video Sender ON-OFF Switch (on side) A/V Out Jacks COAX out Channel 3/4 switch IR Extender Jack RF Antenna(for use with the IRExtender feature) Power Supply Jack ON-OFF Switch (on side) 7 6 Video Audio Out In Out Video Audio A /V Component Antenna To TVAntenna TV A /V Component Antenna To TVAntenna TV Out Video Audio UHF/VHFTo TVUHF/VHF C ONNECTING U P Hooking up the Audio/Video Sender1. Connect one set of Audio/Video cables to the VIDEO and AUDIO jacks of your Audio/Video Sender. Take care to match the colors of theplugs on the cable with the jacks on the Audio/Video Sender. 2. Connect the other end of the cable to the Audio/Video OUT jacks on your TV. Take care to match the colors of the plugs on the cable withthe jacks on the TV. If the jacks on the TV are colored differently,connect the yellow plug to the jack labelled VIDEO, the red plug to thejack labelled AUDIO RIGHT and the white plug to the jack labeledAUDIO LEFT. See diagram A below.Note: If your TV does not include Audio/Video OUT jacks, you will need to remake the connections as shown in diagram B) using theTV antenna (coaxial) connections to link up a Satellite Receiver(DBS), or Cable Box, or VCR, or DVD Player to your TV. 3. Plug the Audio/Video Sender’s Power Supply into a convenient 120 volt wall outlet and plug its jack into the Audio/Video Sender. 4. Position the Audio/Video Sender in a convenient location such as on top of your TV and orient the antenna so that the flat side points in thedirection of the room where you will be installing the Receiver. If you have several A/Vcomponents:If you have two or more A/Vcomponents (e.g. Satellite Receiver(DBS), VCR, Cable Box, DVD Player,etc.) that you want to watch in anotherroom, they will probably already behooked up to the local TV in series (seethe diagram to the right). To connect theAudio/Video Sender you just need toidentify the last component in the chainand connect its LINE OUT jacks to theAudio/Video Sender’s A/V IN jacks.If the last component in the chain doesnot have spare LINE OUT jacks,reconnect the local TV to the lastcomponent in the chain using a coaxialcable to connect to the VHF/UHF jack,then use the A/V connections for theAudio/Video Sender. A) Connections for a TV with A/V OUT jacks. B) Connections for a TV without A/V OUT jacks. A/V Cables CoaxialCable TV UHF/VHF Satellite Receiver Out Video Audio UHF/VHFTo TV In Cable Box Out Video Audio In DVD Player Out Video Audio In 9 8 Hooking up the Audio/Video Receiver1. Connect a set of Audio/Video cables to the A/V OUT jacks of your Audio/Video Receiver. Connect the other end to your TV. 2. Plug the Audio/Video Receiver’s Power Supply into a 120 volt wall outlet and plug its jack into the Audio/Video Receiver. 3. Position the Audio/Video Receiver in a convenient location such as on top of your TV and orient the antenna so that the flat side points in thedirection of the room where you set up the Audio/Video Sender. Video Audio In A /V Component TV Out Video Audio In Video Audio TV In UHF/VHF(COAX) In TV 1 2 TV UHF/VHFFrom antenna If your TV does not have A/V connectors:You can use the supplied coaxial cable to connect the TV OUT COAXsocket on the Audio/Video Receiver to the Antenna input on your TV. Ifyou already have an antenna connected to your TV, you will need to use aTV antenna splitter as shown belo…

Text truncated - open the document above for the full version.

Block Diagram for Video Sender VT46A DSS control output IR Driver 433MHz Receiver 433MHz Left Audio Input Right Audio Input Video Input FM ModulatorFM ModulatorPre-emphasis 2.4GHz RFTransmitter 2.4GHz PatchAntenna 4-Channels Selector

VT46A Rating Label 2.4GHz Wireless Audio/Video Sender ® Cat. No. 15-2572T For use with 6 Cat. No. 15-2572R (Wireless Receiver) For indoor use only. Refer to Owner’s Manual for more information. VDC, 300 mA adapter, and Custom Manufactured in China for RadioShack Corporation, Ft. Worth, TX 76102 FCC ID: B4SVT46A THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. – + •

VT46A Operational Description: The VT46A is a 2.4 GHz FM transmitter. The transmitter operates on one of 4 user selectable channels, A, B, C & D. Their respective frequencies are 2414 MHz, 2431 MHz, 2450 MHz and 2468 MHz. The VT46A takes the Left, Right and Composite Video Inputs and FM modulates the 2.4 GHz carrier. The signal is then transmitted via a patch antenna to theVR46A, 2.4 GHz receiver, where the process is reversed.

PART IDENTIFIERDESCRIPTIONQTY/ASSYREFERENCE AA15-2572TA=1U RS VIDEO X'MITTER NOPACK1 038010=10513-2 433 MC LABEL1 038010=11562DATE CODE (A&A)1 038020=12094A RATING LABEL 15-2572T1 183010=16300A RUBBER STAND2 183010=16390A ANTENNA COVER, VT30A1 183010=20541HINGE (TOP), SILVER1 183010=20551HINGE (BOTTOM), SILVER1 183010=20561A DISK (TOP), SILVER1 183010=20571DISK (BOTTOM), SILVER1 183010=20581DISK HOLDER, SILVER1 183010=20600A SWITCH COVER (S)1 183010=20610A ANTENNA HOLDER, PC+ABS1 183010=20620A PLASTIC TUBE1 183010=20630LENS1 185000=19811TOP CABINET, SILVER1 185000=19821BOTTOM CABINET1 186002=10430REAR TRIM LABEL (TX),6V1 186003=10074ANTENNA LABEL1 201=1348001CTUBE-PVC 1.34MM TR0.02 206002=10027WHITE FOAM(25.4X12.7X3)MM1 220=00200180LED 3MM (RED DIFFUSED)1 283=00000027SLIDE-SW,1P2T,SS12F891 354=12600002WIRE UL1007 #26 RED0.04 363=22601000SINGLE SCREENED0.275 365000=10023HOT MELT GLUE, HE-38A1 391=60201020SCREW M2X6 MS/ZP2 391=60203030SCREW-PPTT M2.6X8 MS/ZP4 391=61503070SCREW-WHTT M2.6X6 DIM6.02 851001=11784ANTENNA PCB ASSY1 042010=11131B PCB ANT. FR4 49X49X1.6MM1 363=00000031A COAXIAL RG178B/U 160MM1 851001=12131PCB ASSY (433MHZ)1 038010=10513-2 433 MC LABEL1 042010=11325A PCB1 074=60900004CAP-VAR 6P, SMD1C16 076=10000012CAP-MCC 10P .25P NPO 06031C5 076=10200014CAP-MCC 1N 10% X7R 06032C3,17 076=10400019CAP-MCC 100N +8-2 Y5V06032C19,20 076=10500016CAP-MCC 1U +8-2 Y5V 08053C11,13,18 076=20900012CAP-MCC 2P .25P NPO 06031C7 076=27900012CAP-MCC 2P7 .25P NPO 06031C9 076=33100023CAP-MCC 330P 5% NPO 06033C10,12,14 076=47000023CAP-MCC 47P 5% NPO 06031C6 076=50800012CAP-MCC 0P5 .25P NPO 06031C4 076=56100023CAP-MCC 560P 5% NPO 06031C8 076=80900012CAP-MCC 8P .25P NPO 06031C1 160=10900012INDUCTOR 1UH 10% SMD 06032L2,4 162089=10023COIL 4T5R ID=2 WD=0.41L1 209=00000001TRS-NPN 2N3904 SMD3Q3,4,5 209=00000003TRS-NPN 2SC3356 SMD R251Q1 210117=10070TRS-NPN MPS H10 SMD1Q2 211103=10000REGULATOR 78L051 240=10206011RES-CF 1K +/-5% 1/8W1R17 241=00000003RES-TFC 0R 5% 1/10W 06031R19 241=10000003RES-TFC 10R 5% 1/10W 06032R7,18 241=10200003RES-TFC 1K 5% 1/10W 06032R14,16 241=10300003RES-TFC 10K 5% 1/10W 06033R8,9,12 241=10500003RES-TFC 1M 5% 1/10W 06032R10,13 241=12200003RES-TFC 1K2 5% 1/10W 06031R4 241=15200003RES-TFC 1K5 5% 1/10W 06031R6 241=22300003RES-TFC 22K 5% 1/10W 06031R1 241=39200003RES-TFC 3K9 5% 1/10W 06031R3 241=47200003RES-TFC 4K7 5% 1/10W 06031R2 241=51200003RES-TFC 5K1 5% 1/10W 06031R11 241=56000003RES-TFC 56R 5% 1/10W 06031R15 241=91200003RES-TFC 9K1 5% 1/10W 06031R5 358=60821001WIRE-JUMPER D=0.6MM4 851001=12575PCB ASSY 2.4G TX MODULE1 042010=11677A PCB, 2.4G TX1 076=10000022CAP-MCC 10P .25P COG 04025C1,3,7,8,26 076=10100024CAP-MCC 100PF 5% COG 04021C4 076=10400028CAP-MCC 100N 10% X7R 04024C24,100,102,103 076=10500028CAP-MCC 1U 10% X7R 04025C12-15,39 076=10600016CAP-MCC 10U +8-2 Y5V 08052C35,36 076=10900022CAP-MCC 1P .25P COG 04021C2 076=15300028CAP-MCC 15N 10% X7R 04021C20 076=18000024CAP-MCC 18P 5% COG 04022C51,53 076=22500031CAP-MCC 2U2 +8-2 Y5V 06032C16,17 076=33000024CAP-MCC 33P 5% COG 04022C22,23 076=47000024CAP-MCC 47P 5% COG 04021C9 076=47300028CAP-MCC 47N 10% X7R 04023C96-98 076=47400028CAP-MCC 470N 10% X7R 04021C21 076=47500031CAP-MCC 4U7 +8-2 Y5V 06033C18,19,25 076=56100028CAP-MCC 560P 10% X7R 04022C31,32 076=56900022CAP-MCC 5P6 .25P COG 04022C40,41 076=68100028CAP-MCC 680P 10% X7R 04021C10 076=82000024CAP-MCC 82P 5% COG 04021C11 076=82100028CAP-MCC 820P 10% X7R 04022C5,6 080=00000048CRYSTAL 8MHZ HC-49/S1Y1 110=00000015MULTILAYER LF2012 2400ACT1F1 138001=100545 WAY PIN HEADER 2.54MM1P2 138001=100556 WAY PIN HEADER 2.54MM1P1 160=27900019INDUCTOR 2N7H 5% 0402 SMD1L3 160=47600019INDUCTOR 4N7H 5% 0402 SMD1L2 160=82800012INDUCTOR 820NH 10%0603SM D2L4,5 160=82900019INDUCTOR 8N2H 5% 0402 SMD1L1 211328=10382IC RTC6701 (QFN32)1I1 241=00000006RES-TFC 0R 5% 1/16W 04025L6,R1,5,25,34 241=10300006RES-TFC 10K 5% 1/16W 04027R19,20,30,33-36 241=10400006RES-TFC 100K 5% 1/16W04023R22,31,32 241=11100006RES-TFC 110R 5% 1/16W04021R21 241=12200006RES-TFC 1K2 5% 1/16W 04022R14,15 241=20300006RES-TFC 20K 5% 1/16W 04025R8-12 241=39000006RES-TFC 39R 5% 1/16W 04021R2 241=51300006RES-TFC 51K 5% 1/16W 04022R17,18 241=68100006RES-TFC 680R 5% 1/16W04022R7,26 241=75000006RES-TFC 75R 5% 1/16W 04022R13,16 241=75100006RES-TFC 750R 5% 1/16W04022R27,28 241=82300006RES-TFC 82K 5% 1/16W 04022R50,52 403041=10117METAL BOX (A)1 851001=12652PCB ASSY,MAIN1 042010=11713B PCB1 057=10000029CAP-E 10U 20% 16V1C6 057=10100002CAP-E 100U 20% 25V1C7 057=10100019CAP-E 100U 20% 10V, 5X112C4,5 076=10400014CAP-MCC 100N 10% X7R 06032C8,9 076=22300014CAP-MCC 22N 10% X7R 06031C2 149001=100203.5MM PCB MT MONO JACK1J5 149=000000222.5MM DC JACK1 149=00000031GOLD RCA SOCKET PCB-MT(Y)1J3 149=00000032GOLD RCA SOCKET PCB-MT(R)1J2 149=00000033GOLD RCA SOCKET PCB-MT(W )1J1 209=00000018TRS-NPN BC817-40 (SOT-23)1Q1 210=00000000TRS-PNP 2N3906 SMD1Q2 211103=10026LOW DROPOUT REG,1117-3V31REG1 212107=10000DIODE-SI 1N41481D1 212107=10002DIODE-SI 1N40041D2 220=00200180LED 3MM (RED DIFFUSED)1LED 241=10200003RES-TFC 1K 5% 1/10W 06031R10 241=10300003RES-TFC 10K 5% 1/10W 06031R3 241=10400003RES-TFC 100K 5% 1/10W06031R2 241=12200003RES-TFC 1K2 5% 1/10W 06031R1 241=15200003RES-TFC 1K5 5% 1/10W 06031R4 241=33100003RES-TFC 330R 5% 1/10W06031R5 241=68000003RES-TFC 68R 5% 1/10W 06031R6 283=00000017SLIDE SW 2P4T (SS-24D02)1SW3 358=60821001WIRE-JUMPER D=0.6MM6

1 2 3 4 56 ABCD 6 5 4 3 2 1 D CBA Title Number Revision Size B Date: 27-Jun-2006 Sheet of File: C:\JOSEPH\SCH\NEWVTA.SCH Drawn By: J3 YELLOW J2 RED J1 WHITE VIDEO AUDIO RAUDIO L TO 2.4G Module C7100uF/25V SW1SW-SLIDE J4DC JACK +3.3V IN GND +6V R10 1K Q1BC337 R2100K R310K D1 4148 C2 10nF Q29015 R782R J7 PHONEJACK C610u R41K5 R5330R R668R +6V 25V +6V 310/433.92MHz RF Receiver Daughter Board C5100u 10V C107 1N5 C108150P C109 1N5 C110150P R410 75R SMD SMD SMD SMD SMD C3100u C107150P SMD D24001 D34001 VI G VO REG1H1117 C1100U C4100U LED R11K5 10V +5V 1 2 34 ABCD 4 3 2 1 D CBA 1 Protel Technology Inc. 1 14-Jun-2006 18:59:56 A:\VTRX1.SCH TitleSize: Number: Date: File: Revision: Sheet of Time: A4 VT 433MHz RF DAUGHTER BOARD C1 8P C31N C4 0P5 C17 1N C2 * C12 330P C13 1U ANT L1 4T5R L2 1U R1 22K R5 9K1 R7 10R R1810R R2 4K7 Q1 2SC3356 L3 C16 6P C5 10P C15 * C6 47P Q2 H10 R3 1K2 R19 0R R4 3K9 +5V R6 1K5 L4 1U C8 560P Vin COM Vout U1 78L05 C9 2P7 R8 10K R9 10K R10 1M R11 5K1 R1210K R13 1M R14 1K R1556R R17 1K R16 1K C10 330P C11 1U Q3 3904 Q4 3904 Q53904 +5V VIN C14 330P RFO C72P VAR C19 * C20 100N 02 +5V RFO +VIN GND PCB : 042010=11325A ASSY NO.: 851001=12131 C18 1U 11 22 33 44 D D C C B B A A 1 SYS TEM X -10 H .K. LTD. 1 AV TRANSMITTER H1 16 77 -1 20 06 042 5D: \7 kam\10 WORK\ 2G 4\RW6 7 s eries-X T\6 7 T x\H 11 677 -1.SCHD OC Ti tl eSize: No: Dat e:File: Revision:Sheet of A4 Cann ot open fil e E: \D ocument s an d Sett in gs\ cheng chi a\ My 22-Jun-06 10 KR20 47 0n F C21 10 0n F C24 33 pFC23 8MHz 08 0-0 000 004 8 Y1 33 pFC22 SPI_SE 10 KR30 10 K R33 10 K R34 10 K R35 CH0CH1CH2 D_3.3V 4. 7uFC25 3.3V 56 0pC32 20 K R11 1KR7 20 KR12 75 0R2810 uF C36 Au di o Rig ht IN 51 K R18 1u FC15 2. 2uFC17 10 0K R31 1u FC39 3.3V VT 20 KR9 75 0R2710 uF C35 51 K R17 1u FC14 10 0K R32 56 0pC31 20 K R8 1KR26 2. 2uFC16 1u FC12 1. 2K R14 75 RR13 4. 7uFC19 82 0p FC6 10 KR19 75 RR16 20 KR10 0RR5 1. 2KR15 10 0p F C4 47 pF C9 68 0p F C10 82 pC11 82 0p F C5 82 0n H 06 03 L5 82 0n H 06 03 L4 VT Vi deo 10 0KR22 15 nFC20 11 0RR21 1u FC13 4. 7uF C18 3.3V 3.3V 2. 7nHL3 4. 7nHL2 1p FC2 10 pFC1 39R2 8. 2nHL1 10 pFC3 3.3V AU DIO L EFT IN VCOVDD 1 VT 2 GND 3 CP 4 AVT2 5 ACP2 6 AOUT2 7 AVDD2 8 AOUT1 9 NC 10 AVT1 11 ACP1 12 AVDD1 13 VDD 14 SPI_SE 15 BCR 16 RE G1 D8 17 PD_REG1D8 18 XTAL1 19 XTAL2 20 VDD33 21 SPICLK/CS0 22 SPILE/CS1 23 SPIDATA/CS2 24 BX 25 SYNVSS 26 RFGND2 27 PAOUT2 28 PAOUT1 29 RFGND1 30 PAVDD 31 NC 32 RTC6701A 21 132 8=10 382 U1 10 0nC103 0RL6 +V D_3.3V 3.3V 10 0nC102 NP 10nF C101 IN 1 GND 2 EN 3 BP 4 OUT 5 U2 VID EOALAR 123456 CON7P1 RFOUT 47 nFC96 47 n C97 47 nFC98 1234567 CON7P2 BX CH0CH1CH2 +V 10 pFC26 10 pFC810 pFC7 BX RFOUT 0RR1 6.5M 6M WHITE RED 10 K R36 1u FC34 0R R25 18 pF C51 18 pFC53 +5V NPC27 1 3 2 LF2 012 -B2R4FAA 11 0-0 000 001 5 F1 11 677 A -A3 Date By Detail KAM 20 060 605 Ass'y: 8510 01=1 257 5 2G4 TX - RT A 011B 1 01C 1 10D 111 US/EUR2414 M2432 M2450 M2468 M Ch CS0-2 AUS 2414 M2432 M2450 M 5p 6C40 5p 6C41 82 KR52 82 KR50 0RR34

Retlif Testing Laboratories, Test Report R-11571-1, X10 (USA), FCC ID: B4SVT46A Page 1 of 27 Technical Information APPLICANT MANUFACTURER Name: X10 (USA), Inc. Name: X-10 Electronics (Shenzhen) Co. Ltd. Address: 19823 58 th Place South Address: Together Rich Industrial Park B Sanwei Industrial District, Xixiang Town City, State, Zip: Kent, WA 98032 City, State, Zip: Baoan County, Shenzhen, China TEST SPECIFICATION: FCC Rules and Regulations Part 15, Subpart C, Section 15.249 TEST PROCEDURE: ANSI C63.4:2003 TEST SAMPLE DESCRIPTION TEST SAMPLE: 2.4 GHz Video Sender with Transmitter and 433 MHz Receiver BRANDNAME(s): X10 (USA) MODEL(s): VT46A FCC ID: B4SVT46A TYPE: Frequency Modulated Transmitter POWER REQUIREMENTS: 6 VDC, 300 mA derived from external AC Adapter FREQUENCY OF OPERATION: 2400-2483.5 MHz Bandwidth APPLICABLE RULE SECTION: Part 15, Subpart C, Section 15.249 TESTS PERFORMED - 15.207(a) Conducted Emissions - 15.249(a) Occupied Bandwidth - 15.249(c)/15.209 Radiated Emissions, Spurious Case - 15.249(a) Radiated Emissions, Fundamental and Harmonics Retlif Testing Laboratories, Test Report R-11571-1, X10 (USA), FCC ID: B4SVT46A Page 2 of 27 TEST RESULTS 15.203: The intentional radiator is designed to ensure that no antenna other than that furnished by the applicant can be used with the device. 15.207 (a): FOR AC POWERED UNITS THAT FOLLOWING STATEMENT SHOULD BE INCLUDED IN THE TEST REPORT: The radio frequency voltage that was conducted back on to the AC power line on any frequency/frequencies within the bandwidth of 150 kHz to 30 MHz did not exceed Class B limits as specified in CISPR 22. 15.249 (a): The unit operates in 2400 MHz to 2483.5 MHz band. The field strength of the fundamental did not exceed 50 mV/M avg. The field strength of the harmonics did not exceed 500 μV/M avg. 15.249 (b): Field strength readings were taken at 3 meters unless otherwise noted. 15.249 (c): Emissions radiated outside the specified frequency band were attenuated in accordance with the general radiated emissions limits of 5.209. 15.249 (d): The peak field strength of any emission did not exceed the maximum permitted average field strength by more than 20 dB. Retlif Testing Laboratories, Test Report R-11571-1, X10 (USA), FCC ID: B4SVT46A Page 3 of 27 GENERAL NOTES 1. All user accessible controls were adjusted to produce maximum emissions. 2. The device was tested with the following external accessories: AC adapter Model No.: 06300 Panasonic VCR Tri-RCA Cable; ¼ inch mini dim cable 3. Measurements of Conducted Emissions were performed utilizing a 50 ohm / 50 μhenry Line Impedance Stabilization Network (LISN). Channel A Channel B Channel C Channel D 4. The unit operates at the following frequencies: 2414 MHz 2431 MHz 2450 MHz 2468 MHz The unit was tested at the following frequencies: 2414 MHz - 2450 MHz 2468 MHz 5. The frequency range was scanned from 30 MHz to 25 GHz. All emissions not reported were more than 20 dB over the specified limit. Retlif Testing Laboratories, Test Report R-11571-1, X10 (USA), FCC ID: B4SVT46A Page 4 of 27 Certification and Signatures We certify that this report is a true representation of the results obtained from the tests of the equipment stated. We further certify that the measurements shown in this report were made in accordance with the procedures indicated and vouch for the qualifications of all Retlif Testing Laboratories personnel taking them. Donald C. Lerner EMC Test Engineer Richard J. Reitz Laboratory Manager Non-Warranty Provision The testing services have been performed, findings obtained and reports prepared in accordance with generally accepted laboratory principles and practices. This warranty is in lieu of all others, either expressed or implied. Non-Endorsement This test report contains only findings and results arrived at after employing the specific test procedures and standards listed herein. It is not intended to constitute a recommendation, endorsement or certification of the product or material tested. This test report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S. Government. Retlif Testing Laboratories, Test Report R-11571-1, X10 (USA), FCC ID: B4SVT46A Page 5 of 27 EQUIPMENT LIST FCC Part 15; Conducted Emissions EN Type Manufacturer Description Model No. Cal Date Due 078 LISN Solar Electronics 10 kHz - 30 MHz 8028-50-TS24BNC 6/29/2006 6/29/2007 079 LISN Solar Electronics 10 kHz - 30 MHz 8028-50-TS24BNC 6/29/2006 6/29/2007 896 EMI Test Receiver Rohde & Schwarz 20 Hz - 40 GHz ESIB40 8/2/2005 9/2/2006 FCC Part 15 Subpart C; Radiated Emissions EN Type Manufacturer Description Model No. Cal Date Due 067 Open Area Test Site Retlif 3 Meter RNY 10/1/2003 10/1/2006 128 Double Ridged Guide Electro-Mechanics 1 GHz - 18 GHz 3105 3/27/2006 3/27/2007 129E High Gain Horn Antenna Microlab/FXR 18 GHz - 26.5 GHz K638A 9/16/2005 9/16/2006 133 Broadband Pre-Amplifier Electro-Metrics 10 kHz - 1 GHz, 26dB BPA-1000 6/27/2006 6/27/2007 141 Spectrum Analyzer Hewlett Packard 100 Hz - 40 GHz 8566B 3/23/2006 9/23/2006 141A Graphics Plotter Hewlett Packard N/A 7470A 2/9/2006 2/9/2007 141B Quasi-Peak Adaptor Hewlett Packard 100 Hz - 1 GHz 85650A 3/17/2006 9/17/2006 141C Cable Retlif 1 GHz ~ 18 GHz 1 METER, BLUE 1/4/2006 1/4/2007 141D Cable Retlif 1 GHz ~ 18 GHz 10 METER, BLACK 1/4/2006 1/4/2007 206B 6.0 dB Attenuator Texscan 0 - 1.0 GHz FP-50 - 6 dB 6/27/2006 6/27/2007 420 Amplifier Hewlett Packard 2.0 GHz - 18 GHz 11975A 10/31/2005 10/31/2006 421 Harmonic Mixer Hewlett Packard 18 GHz - 26.5 GHz 11970K 9/29/2003 9/29/2006 543 Preamplifier Hewlett Packard 1.0 GHz - 26.5 GHz 8449B 9/9/2005 9/9/2007 617 Interference Analyzer Electro-Metrics 10 kHz - 1 GHz EMC-30 2/21/2006 2/21/2007 767 Biconilog EMCO 26 - 2000 MHz 3142B 10/7/2005 10/7/2006 Occupied Bandwidth EN Type Manufacturer Description Model No. Cal Date Due 128B Double Ridge Guide AEL 2 GHz - 18 GHz H1498 9/16/2005 9/16/2006 141 Spectrum Analyzer Hewlett Packard 100 Hz - 40 GHz 8566B…

Text truncated - open the document above for the full version.

Retlif Testing Laboratories, Test Report No. R-11571-1, X-10 (USA), FCC ID: B4SVT46A Page 1 of 3 Conducted Emissions, Rear Test Setup Conducted Emissions, Front Test Setup Retlif Testing Laboratories, Test Report No. R-11571-1, X-10 (USA), FCC ID: B4SVT46A Page 2 of 3 Occupied Bandwidth, Test Setup Radiated Emissions, Rear Test Setup Retlif Testing Laboratories, Test Report No. R-11571-1, X-10 (USA), FCC ID: B4SVT46A Page 3 of 3 Radiated Emissions, Front Test Setup