BBO75AR01CB Radio

C M Y CM MY CY CMY K 75_ALLROAD_QSG_ENG_4X5_PRINT_081622.pdf 1 8/16/22 12:14 PM CCBR75AR01 C M Y CM MY CY CMY K 75_ALLROAD_QSG_ENG_4X5_PRINT_081622.pdf 2 8/16/22 12:14 PM 54 65 54 CCBR75AR01 CCBR75AR01 This radio transmitter [IC:906A-75AR01] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Cet émetteur radio [IC:906A-75AR01] a été approuvé par Innovation, Sciences et Développement économique Canada pour fonctionner avec les types d'antennes énumérés ci-dessous, avec le gain maximal admissible indiqué. Les types d'antennes qui ne figurent pas dans cette liste et dont le gain est supérieur au gain maximal indiqué pour tout type répertorié sont strictement interdits d'utilisation avec cet appareil.

Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707-4013 United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-010-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: BBO75AR01 Cobra Electronics Corporation (“the applicant”) certifies that the equipment for which authorization is sought is not“covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Chris de Waal

Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707-4013 United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-10-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: BBO75AR01 Cobra Electronics Corporation (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Chris de Waal

Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707-4013 United States 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Product Name: CB Radio FCC ID: BBO75AR01 Model(s): CCBR75AR01 2.911(d)(7) USA Designated Agent for Service of Process We, [Cobra Electronics Corporation] (“the applicant”) designate [Agent located in the United States] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: Cobra Electronics Corporation Address: 6500 West Cortland Street Chicago, IL 60707-4013 United States Contact Name: Chris de Waal Telephone No: 773-804-6285 Email: [email protected] FRN:0004374997 Signature: __________________ Date:Feb.10, 2023 Cobra Electronics Corporation 6500 West Cortland Street Chicago, IL 60707-4013 United States 2.911 (d)(7)USA Agent v1.2 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Cobra Electronics Corporation Agent Authorization Company: Cobra Electronics Corporation Address: 6500 West Cortland Street Chicago, IL 60707 United States Product Name: CB Radio Model Number(s): CCBR75AR01 Product Description: CB Radio We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022-11-17 Name: Chris de Waal Company: Cobra Electronics Corporation

Cobra Electronics Corporation Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-11-28 Subject; Request for Confidentiality FCC ID: BBO75AR01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Cobra Electronics Corporation Contact person: Chris de Waal

Report No.: AGC01284220902AP02 Page 1 of 7 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC01284220902AP02 Page 2 of 7 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC01284220902AP02 Page 3 of 7 BACK VIEW OF EUT LEFT VIEW OF EUT Antenna Port Report No.: AGC01284220902AP02 Page 4 of 7 RIGHT VIEW OF EUT Hand microphone TOP VIEW OF EUT Report No.: AGC01284220902AP02 Page 5 of 7 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC01284220902AP02 Page 6 of 7 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC01284220902AP02 Page 7 of 7 RIGHT VIEW OF EUT ****************************************End of Report****************************************

FCC ID&IC Label Location

Report No.: AGC01284220902AP02 Page 1 of 11 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC01284220902AP02 Page 2 of 11 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) BT Antenna Report No.: AGC01284220902AP02 Page 3 of 11 INTERNAL VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 4) Report No.: AGC01284220902AP02 Page 4 of 11 INTERNAL VIEW OF EUT (FIGURE 5) INTERNAL VIEW OF EUT (FIGURE 6) Report No.: AGC01284220902AP02 Page 5 of 11 INTERNAL VIEW OF EUT (FIGURE 7) INTERNAL VIEW OF EUT (FIGURE 8) Report No.: AGC01284220902AP02 Page 6 of 11 INTERNAL VIEW OF EUT (FIGURE 9) INTERNAL VIEW OF EUT (FIGURE 10) Report No.: AGC01284220902AP02 Page 7 of 11 OPEN VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC01284220902AP02 Page 8 of 11 INTERNAL VIEW OF EUT (FIGURE 2) Hand microphone OPEN VIEW OF EUT (FIGURE 1) Report No.: AGC01284220902AP02 Page 9 of 11 OPEN VIEW OF EUT (FIGURE 2) OPEN VIEW OF EUT (FIGURE 3) Report No.: AGC01284220902AP02 Page 10 of 11 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 2) BT Antenna Report No.: AGC01284220902AP02 Page 11 of 11 ****************************************End of Report****************************************

RF EXPOSURE EVALUATION 1.TEST RESULT CERTIFICATION Applicant Cobra Electronics Corporation Address 6500 West Cortland Street Chicago, IL 60707-4013 United States manufacturer Cobra Electronics Corporation Address 6500 West Cortland Street Chicago, IL 60707-4013 United States Factory Cobra Electronics Corporation Address 6500 West Cortland Street Chicago, IL 60707-4013 United States Product Designation: CB Radio Brand Name: COBRA Test Model: CCBR75AR01 FCC ID: BBO75AR01 Date of receipt of test item Oct. 26, 2022 Date of Test Oct. 26, 2022~Nov. 17, 2022 2.TECHNICAL INFORMATION A major technical description of EUT is described as following: Operation Frequency 26.965MHz-27.405MHz Modulation AM/FM Antenna Designation Detachable Antenna type External Antenna Output power 4W Antenna gain 0dBi (Typical), 5dBi (Max) Power Supply DC 13.8V 3.RF EXPOSURE MEASUREMENT 3.1 INTRODUCTION Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. The 1992 ANSI/IEEE standard (See Listed limit table) specifies a minimum separation distance of 20 cm for performing reliable field measurements to determine adherence to MPE limits. If the minimum separation distance between a transmitter and nearby persons is more than 20 cm under normal operating conditions, compliance with MPE limits may be determined at such distance from the transmitter. When applicable, operation instructions and prominent warning labels may be used to alert the exposed persons to maintain a specified distance from the transmitter or to limit their exposure durations and usage conditions to ensure compliance. 3.2 FCC LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f 2 )* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 *Note: 1. f= Frequency in MHz * Plane-wave Equivalent Power Density 2. The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-based time-averaging requirement for mobile and portable transmitters. 3.3 CLASSIFICATION OF THE ASSESSMENT METHODS According to user manual, The antenna of the product, under normal use condition is at least 65cm away from the body of the user. Warning statement to the user for keeping at least 65cm separation distance and the prohibition of operating to a person has been printed on the user’s manual. So, this product under normal use is located on electromagnetic far field between the human body. S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 3.4 EUT OPERATION CONDITION Make the EUT to transmit at Bottom channel, Middle channel and Top channel individually. 3.5 TEST RESULTS Note: report the worst result in this part Antenna Gain=5.0dBi (Numeric 3.16), π=3.141 TEST Frequency (MHz) Tune-up Tolerance (dBm) Max tune-up (dBm) Max tune-up (mW) Power Density (mW/cm 2 ) Power Density Limit (mW/cm 2 ) Result (Pass/Fail) 26.965 AM 35.5±0.5 36.0 3981.0717 0.236991321 0.2432 Pass Antenna Gain=5.3dBi (Numeric 3.39), π=3.141 TEST Frequency (MHz) Tune-up Tolerance (dBm) Max tune-up (dBm) Max tune-up (mW) Power Density (mW/cm 2 ) Power Density Limit (mW/cm 2 ) Result (Pass/Fail) 2440 BT 5.0±0.6 5.60 3.630780548 0.00023187 1.0 Pass Note: 1. The output power is refer to AGC01284220704FE10. 2. According to the user manual, the minimum separate distance which used for MPE calculate is 65cm.

Page 1 of 46 FCC Test Report Report No.: AGC01284220902FE10 FCC ID : BBO75AR01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : CB Radio BRAND NAME : COBRA MODEL NAME : CCBR75AR01 APPLICANT : Cobra Electronics Corporation DATE OF ISSUE : Nov. 18, 2022 STANDARD(S) : FCC Part 95 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01284220902FE10 Page 2 of 46 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Nov. 18, 2022 Valid Initial Release Report No.: AGC01284220902FE10 Page 3 of 46 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 5 2. PRODUCT INFORMATION .............................................................................................................................. 6 2.1 PRODUCT TECHNICAL DESCRIPTION ................................................................................................ 6 2.2 TEST FREQUENCY LIST ........................................................................................................................ 7 2.3 RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................. 8 2.4 TEST METHODOLOGY .......................................................................................................................... 8 2.5 CALCULATION OF EMISSION INDICATORS ........................................................................................ 8 2.6 STATEMENT - COMPLIANCE TO §95.977 ............................................................................................ 9 2.7 SPECIAL ACCESSORIES ....................................................................................................................... 9 2.8 EQUIPMENT MODIFICATIONS .............................................................................................................. 9 3. TEST ENVIRONMENT ................................................................................................................................... 10 3.1 ADDRESS OF THE TEST LABORATORY ............................................................................................ 10 3.2 TEST FACILITY ..................................................................................................................................... 10 3.3 ENVIRONMENTAL CONDITIONS......................................................................................................... 11 3.4 MEASUREMENT UNCERTAINTY ........................................................................................................ 11 3.5 LIST OF EQUIPMENTS USED ............................................................................................................. 12 4.SYSTEM TEST CONFIGURATION ................................................................................................................. 13 4.1 EUT CONFIGURATION ......................................................................................................................... 13 4.2 EUT EXERCISE ..................................................................................................................................... 13 4.3 CONFIGURATION OF TESTED SYSTEM ............................................................................................ 13 4.4 EQUIPMENT USED IN TESTED SYSTEM........................................................................................... 13 4.5 SUMMARY OF TEST RESULTS ........................................................................................................... 14 5. DESCRIPTION OF TEST MODES ................................................................................................................. 15 6.FREQUENCY STABILITY ............................................................................................................................... 16 6.1 PROVISIONS APPLICABLE .................................................................................................................. 16 6.2 MEASUREMENT PROCEDURE ........................................................................................................... 16 6.3 MEASUREMENT SETUP ...................................................................................................................... 16 6.4 MEASUREMENT RESULTS.................................................................................................................. 17 7. EMISSION BANDWIDTH ............................................................................................................................... 18 7.1 PROVISIONS APPLICABLE .................................................................................................................. 18 7.2 MEASUREMENT PROCEDURE ........................................................................................................... 18 7.3 MEASUREMENT SETUP ...................................................................................................................... 18 7.4 MEASUREMENT RESULTS.................................................................................................................. 19 8. RATIATED SPURIOUS EMISSION ................................................................................................................. 21 8.1 PROVISIONS APPLICABLE .................................................................................................................. 21 Report No.: AGC01284220902FE10 Page 4 of 46 8.2 MEASUREMENT PROCEDURE ........................................................................................................... 21 8.3 MEASUREMENT SETUP ...................................................................................................................... 22 8.4 MEASUREMENT RESULTS........................................................…

Text truncated - open the document above for the full version.

Report No.: AGC01284220902FE10 Page 37 of 46 10. MAXIMUMN TRANSMITTER POWER 10.1 PROVISIONS APPLICABLE FCC Part 95.967, FCC Part2.1046(a) Each CBRS transmitter type must be designed such that the transmitter power can not exceed the following limits: (a) When transmitting amplitude modulated (AM) voice signals or frequency modulated (FM) voice signals, the mean carrier power must not exceed 4 Watts (b) When transmitting single sideband (SSB) voice signals, the peak envelope power must not exceed 12 Watts. 10.2 MEASUREMENT METHOD Conducted RF Output Power: 1. The RF output of the transmitter was connected to the input of the spectrum analyzer through sufficient attenuation. 2. The DUT was connected to a Spectrum Analyzer (SA) via a 30dB attenuator connected to the DUT’s antenna port. The SA was configured as above using the Automatic 6dB Cursor Bandwidth measurement. The output power of the DUT was set to the manufacturer’s highest output power setting at the Low, Mid and High frequency channels as permitted by the device. The DUT was set to transmit at its maximum Duty Cycle. 3. Spectrum set as follow: Centre frequency = fundamental frequency, Span=50kHz, RBW=300Hz, VBW=3KHz ; Sweep = auto, Detector function = peak, Trace = max hold 10.3 MEASUREMENT SETUP Report No.: AGC01284220902FE10 Page 38 of 46 10.4 MEASUREMENT RESULTS Test plot as follows: 10kHz, AM Modulation:26.965MHz-4W 10kHz, AM Modulation:27.205MHz-4W 10kHz, AM Modulation:27.405MHz-4W Conducted Power Measurement Results Mode Channel Separation Test Channel Measurement Result (dBm) CBRS TX 10 kHz 26.965 MHz 35.69 27.205 MHz 35.55 27.405 MHz 35.18 Report No.: AGC01284220902FE10 Page 39 of 46 Test plot as follows: 10kHz, FM Modulation:26.965MHz-4W 10kHz, FM Modulation:27.205MHz-4W 10kHz, FM Modulation:27.405MHz-4W Conducted Power Measurement Results Mode Channel Separation Test Channel Measurement Result (dBm) CBRS TX 10 kHz 26.965 MHz 35.94 27.205 MHz 35.85 27.405 MHz 35.89 Report No.: AGC01284220902FE10 Page 40 of 46 11.MODULATION CHARACTERISTICS 11.1 PROVISIONS APPLICABLE FCC Part 95.975, FCC Part 2.1047(b) Each CBRS transmitter type must be designed such that the modulation characteristics are in compliance with the rules in this section. a) When emission type A3E is transmitted with voice modulation, the modulation percentage must be at least 85%, but not more than 100%. b) When emission type A3E is transmitted by a CBRS transmitter having a transmitter output power of more than 2.5 W, the transmitter must contain a circuit that automatically prevents the modulation percentage from exceeding 100%. c) When emission type F3E is transmitted the peak frequency deviation shall not exceed ±2 kHz. 11.2 MEASUREMENT METHOD_(AM) (A) Audio frequency response Connect the equipment as illustrated. Adjust to deliver 50% modulation at the audio frequency that produces the maximum modulation level Record the modulation input level (mV) and use this level as 0dB for plotting modulation limiting. Vary the modulating frequency from 100Hz to 10000Hz and record the input levels necessary to maintain a constant 50% modulation. Graph the audio level in dB relative to the 0dB reference level as a function of the modulating frequency. Record audio frequency where it is impossible to perform the measurement. (B) Modulation limiting Connect the equipment as illustrated. Adjust to deliver 50% modulation at the audio frequency that produces the maximum modulation level Record the modulation input level (mV) and use this level as 0dB for plotting modulation limiting. Increment the audio signal level to 40dB above the reference level. Record the modulation level (%). Repeat the measurements using a 400Hz and a 2500Hz sinusoidal audio signal, record the modulation level (%), perform for both positive and negative modulation. 11.3 MEASUREMENT METHOD_(FM) (C) Modulation limiting (1). Configure the EUT as shown in figure 1, adjust the audio input for 60% of rated system deviation at 1kHz using this level as a reference (0dB) and vary the input level from –20 to +20dB. Record the frequency deviation obtained as a function of the input level. (2). Repeat step 1 with input frequency changing to 300, 1000, 1500 and 3000Hz in sequence. (D) Audio frequency response (1). Configure the EUT as shown in figure 1. (2). Adjust the audio input for 20% of rated system deviation at 1 kHz using this level as a reference (0 dB). (3). Vary the Audio frequency from 100 Hz to 10 kHz and record the frequency deviation. (4). Audio Frequency Response = 20log10 (Deviation of test frequency/Deviation of 1 kHz reference). Report No.: AGC01284220902FE10 Page 41 of 46 11.4 MEASUREMENT SETUP Report No.: AGC01284220902FE10 Page 42 of 46 11.5 MEASUREMENT RESULTS (A). MODULATION LIMIT: 10kHz, AM modulation, Assigned Frequency:27.405MHz-4W Modulation Level (mV) Peak Freq. Deviation At 300 Hz (%) Peak Freq. Deviation At 600 Hz (%) Peak Freq. Deviation At 1000 Hz (%) Peak Freq. Deviation At 2500 Hz (%) 1 14 22 24 25 10 26 60 61 61 100 28 77 63 69 300 34 79 69 72 500 35 82 75 77 700 36 85 81 82 800 51 88 85 85 900 56 89 86 89 1000 55 88 87 87 Note: 1. All the modes had been tested, but only the worst data recorded in the report 2.The equipment circuit comes with circuit control that automatically prevents the modulation limit from exceed ing 100%. Report No.: AGC01284220902FE10 Page 43 of 46 (B). AUDIO FREQUENCY RESPONSE: Audio Frequency Response@50%MI Note:1.All the modes had been tested, but only the worst data recorded in the report. 2. 50% MI Could not be achieved above 5200 Hz. 10kHz, AM modulation, Assigned Frequency:27.405MHz-4W Frequency (Hz) modulation level (mV) Deviation (kHz) Audio Frequency Response(dB) 100 -- -- 200 -- -- 300 20.11 0.07 -19.88 400 13.41 0.09 -17.69 500 12.56 0.16 -12.69 600 9.00 0.24 -9.17 700 8.42 0.39 -4.96 800 7.69 0.49 -2.97 900 6.22 0.71 0.25 1000 6.10 0.69 0.00 1200 6.56 0.74 0.61 1400 6.43 0.75 0.72 1600 5.28 0.82 1.50 1800 5.37 0.84 1.71 2000 5.62 0.88 2.1…

Text truncated - open the document above for the full version.

Report No.: AGC01284220902AP01 Page 1 of 3 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP-BELOW 30MHz RADIATED EMISSION TEST SETUP-ABOVE 30MHz Report No.: AGC01284220902AP01 Page 2 of 3 RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC01284220902AP01 Page 3 of 3 RF CONDUCTED TEST SETUP ****************************************End of Report*************************************