BBOLESS01Radar detector with Bluetooth

cobra.com Cobra Electronics Inc. 1701 Golf Road, Suite 3-900 Rolling Meadows, Illinois 60008 1 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-19-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: BBOLESS01 [Cobra Electronics Corporation] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Cobra Electronics Corporation] (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Chris de Waal Director of Project Engineering

cobra.com Cobra Electronics Inc. 1701 Golf Road, Suite 3-900 Rolling Meadows, Illinois 60008 1 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-19-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: BBOLESS01 Cobra Electronics Corporation “the applicant” certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Chris de Waal Director or Project Engineering

cobra.com Cobra Electronics Inc. 1701 Golf Road, Suite 3-900 Rolling Meadows, Illinois 60008 1 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 12-29-2025 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: BBOLESS01 Cobra Electronics (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0004374997 Name: Cobra Electronics Corporation Address:1701 Golf Road Suite 3-900, Rolling Meadows, Illinois, 60008, United States Contact Person: Chris deWaal Tel.: 773-804-6285 Email: [email protected] Sincerely, Signed by: Chris deWaal Signature:

Date: 01/14/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Request of Confidentiality FCC ID: BBOLESS01 To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Cobra Electronics Corporation hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Cobra Electronics Corporation temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Part Lists 4 Operation Description 5 Part Location SHORT-TERM 6 Internal Photos 7 External Photos 8 Test-Setup Photos 9 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Contact Name: Chris de Waal Title: Director of Project Engineering

Date: 01/14/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Letter of Authorization We, the undersigned, hereby authorize Geunki Son of Dt&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: BBOLESS01 including signing of all documents relating to these matters. Any and all acts carried out by Geunki Son of Dt&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Cobra Electronics Corporation “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Contact Name: Chris de Waal Title: Director of Project Engineering

FCC ID: RF feature Max Target Power (dBm) Note 1 ANT Gain (dBi) Maximum EIRP (dBm) Maximum EIRP (mW) Maximum power density (mW/cm 2 ) Requirement (mW/cm 2 ) LE 1, 2Mbps 2402.0 ~ 2480.0 2.00 -4.24 -2.24 0.598 0.0002 1.000 ~~~~~~~~~~~ ▪ S = - Note = / ( 4 X 20 2 X π ) = mW/cm 2 Electric Field strength (V/m) Magnetic field strength (A/m) Power Density (mW/cm 2 ) Averaging time (minutes) 0.3 ~ 1.34 614 1.63 *100 30 1.34 ~ 30 824/f 2.19 / f *180 / f 2 30 30 ~ 300 27.5 0.073 0.2 30 300 ~ 1,500 f / 1500 30 1,500 ~ 100,000 1.0 30 Conclusion : BBOLESS01 MPE Calculation Regulation(s): Part 1.1310, Part 2.1091Method: KDB447498 D01v06 Frequency range (MHz) Note 1: Please refer to the Operation description f or Max tune-up power. The EUT will only be used with a separation of 20 c entimeters or greater between the antenna and the b ody of the user. The MPE sample calculation for this exposure is sho wn below. EIRP / ( 4 R 2 π ) 0.598 S= Maximum power density(mW/cm 2 ) This device complies with RF exposure requirement. 0.000 EIRP= Equivalent Isotropic Radiated Power(mW)R= Distance to the center of the radiation of the a ntenna(20cm) Part 1.1310 ▪ Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz)

BLE Antenna Specifications Doc Ver : Rev.2 Date : 2026-01-02 Made by H/W R&D Team, R&D Division, BG T&A Co. *Function : Antenna for Bluetooth communication *Antenna Structure : PIFA (MIFA) *Applied Model Name : RAD490i *PCB : FR-4, KB6160, 6-Layer, 1.6T, 1/2oz (REV.D) *Frequency Range : 2,400 ~ 2,483MHz *Impedance : 50ohm nominal *VSWR : Less than 1:8794 (1:1.1849 @2,450MHz) → Attached #1 *Peak(Max) Gain : -4.24dBi → Attached #2 *Radiation Pattern : Omni-directional *Polarization : Linear *Test Details : - Tester : KH Park, KS Rhee - Date : 2025-10-31 - Equipments & Software : Network Analyzer, Basestation Simulator, Positioner Controller, PC(TIS & TRP Measurement Software installed) - Description : ▪ 50ohm passive matching with Network Analyzer ▪ Gain & Radiation Patterns measurement at Anechoic Chamber Attached #1 : VSWR Passive Matching Values : Shunt 1.2pF – Series 4.3nH – Shunt DNI – Antenna Attached #2 : Gain & Radiation Pattern .End Of Data.

Report No.: DRTFCC2601-0003 FCC ID: BBOLESS01 This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-238(07)250909 Pages: 2 / 59 Test Report Version Test Report No. Date Description Revised by Reviewed by DRTFCC2601-0003 Jan, 16. 2026 Initial issue SeungMin Gil JaeJin Lee Report No.: DRTFCC2601-0003 FCC ID: BBOLESS01 This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-238(07)250909 Pages: 3 / 59 Table of Contents 1. General Information .................................................................................... 4 1.1. Description of EUT .......................................................................................................... 4 1.2. Support Equipment ......................................................................................................... 4 1.3. Testing Laboratory .......................................................................................................... 5 1.4. Testing Environment ....................................................................................................... 5 1.5. Measurement Uncertainty............................................................................................... 5 1.6. Test Equipment List ........................................................................................................ 6 2. Test Methodology ........................................................................................ 7 2.1. EUT Configuration ........................................................................................................... 7 2.2. EUT Exercise .................................................................................................................... 7 2.3. General Test Procedures ................................................................................................ 7 2.4. Instrument Calibration .................................................................................................... 7 2.5. Description of Test Modes.............................................................................................. 7 3. Antenna Requirements ............................................................................... 8 4. Summary of Test Results ........................................................................... 9 5. Test Result ................................................................................................. 10 5.1. Maximum Peak Conducted Output Power .................................................................. 10 5.1.1. Test Setup .................................................................................................................. 10 5.1.2. Test Procedures ........................................................................................................ 10 5.1.3. Test Results ............................................................................................................... 10 5.2. 6 dB Bandwidth ............................................................................................................. 15 5.2.1. Test Setup .................................................................................................................. 15 5.2.2. Test Procedures ........................................................................................................ 15 5.2.3. Test Results ............................................................................................................... 16 5.3. Power Spectral Density ................................................................................................. 21 5.3.1. Test Setup .................................................................................................................. 21 5.3.2. Test Procedures ........................................................................................................ 21 5.3.3. Test Results ............................................................................................................... 21 5.4. Unwanted Emissions (Conducted) .............................................................................. 26 5.4.1. Test Setup .................................................................................................................. 26 5.4.2. Test Procedures ........................................................................................................ 26 5.4.3. Test Results ............................................................................................................... 27 5.5. Unwanted Emissions (Radiated) .................................................................................. 43 5.5.1. Test Setup .................................................................................................................. 44 5.5.2. Test Procedures ........................................................................................................ 44 5.5.3. Test Results ............................................................................................................... 46 5.6. AC Power-Line Conducted Emissions ........................................................................ 48 5.6.1. Test Setup .................................................................................................................. 48 5.6.2. Test Procedures ........................................................................................................ 48 5.6.3. Test Results ............................................................................................................... 48 APPENDIX I .................................................................................................... 51 APPENDIX II ................................................................................................... 52 APPENDIX III ......................................................................................…

Text truncated - open the document above for the full version.