BBP-PRSP35101Laser Printer

1 Information Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. Important Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine. Notes: Some illustrations in this manual might be slightly different from the machine. Caution Use of controls or adjustments or performance of procedures other than those specified in this manual might result in hazardous radiation exposure. For good print quality, the manufacturer recommends that you use genuine toner from the manufacturer. The manufacturer shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the manufac- turer with your office products. Power Source 120 V, 60 Hz, 10 A Please be sure to connect the power cord to a power source as above. 2 Laws and Regulations Legal Prohibition Do not copy or print any item for which reproduction is prohibited by law. Copying or printing the following items is generally prohibited by local law: bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, pass- ports, driver’s licenses. The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its completeness or accuracy. If you have any questions concerning the legality of copying or printing certain items, consult with your legal advisor. Laser Safety CDRH Regulations This equipment complies with requirements of 21 CFR subchapter J for class I laser products. This equipment contains four AlGaAS laser diodes, 6.2 mil- liwat, 770-795 nanometer wavelength for each emitter. The beam divergence angle is 25 degrees (minimum) and 38 degrees (maximum) in the vertical direc- tion, and 8 degrees (minimum) and 14 degrees (maximum) in the horizontal direction, and laser beams are generated in Continuous Wave (CW) mode. Caution: Use of controls or adjustments or performance of procedures other than those specified in this manual might result in hazardous radiation exposure. 3 Note to users in the United States of America FCC Rules Declaration of Conformity ❖ This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Responsible party: Ricoh Americas Corporation Address: 5 Dedrick Place, West Caldwell, NJ 07006 Telephone number: 973-882-2000 Product Name: Laser Printer Model Number: SP C242DN/Aficio SP C242DN Note ❖ This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep- tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which • the receiver is connected. Consult the dealer or an experienced radio /TV technician for help.• Caution ❖ Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 4 Note to users in Canada Note This Class B digital apparatus complies with Canadian ICES- 003. Remarque concernant les utilisateurs au Canada Avertissement Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 5 Safety Information When using this machine, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: WARNING: R Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. CAUTION: R Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. Safety Precautions to be Followed This section explains safety precautions that should always be followed when using this machine. Environments where the machine can be used This section explains safety precautions about environments where the ma- chine can be used. WARNING: R Do not use flammable sprays or solvents in the vicinity of this ma-• chine. Doing so could result in fire or electric shock. Do not place vases, plant pots, cups, toiletries, medicines, small metal • objects, or containers holding water or any other liquids, on or close to this machine. Fire or electric shock could result from spillage or if such objects or substances fall inside this machine. CAUTION: R Keep the machine away from humidity and dust. Otherwise a fire or an • electric shock might occur. Do not place the machine on an unstable or tilted surface. If it topples over, • an injury might occur. 6 Do not place heavy objects on the machine. Doing so can cause the ma-• chine to topple over, possibly resulting in injury. Make sure the room where you are using the machine is well ventilated • and spacious. Good ventilation is especially important when the machine is used heavily.…

Text truncated - open the document above for the full version.

Operating Instructions Hardware Guide For safe and correct use, be sure to read "Safety Information" before using the machine. TABLE OF CONTENTS Notice..................................................................................................................................................................4 Introduction.....................................................................................................................................................4 Important.........................................................................................................................................................4 How to Read This Manual.................................................................................................................................5 Symbols...........................................................................................................................................................5 Notes...............................................................................................................................................................5 Model-Specific Information...............................................................................................................................6 Positions of WARNING and CAUTION labels.......................................................................................8 Power Switch Symbols...................................................................................................................................9 Manuals for This Printer...................................................................................................................................10 List of Option.....................................................................................................................................................11 Operating Instructions......................................................................................................................................12 Reading the HTML Manuals on the CD-ROMs.........................................................................................12 Reading the HTML Manuals That You Install on the Computer...............................................................12 1. Guide to the Printer Exterior: Front View..........................................................................................................................................15 Exterior: Rear View...........................................................................................................................................16 Interior...............................................................................................................................................................17 Control Panel....................................................................................................................................................18 2. Installing the Printer and Options Installing the Printer..........................................................................................................................................21 Where to Put the Printer...............................................................................................................................21 Unpacking....................................................................................................................................................24 Turning the Power On..................................................................................................................................31 Selecting the Display Language.................................................................................................................34 Test Printing...................................................................................................................................................34 Installing Option...............................................................................................................................................36 Attaching Paper Feed Unit..........................................................................................................................36 3. Connecting the Printer Network Connection........................................................................................................................................39 Reading the LED Lamps...............................................................................................................................40 USB Connection...............................................................................................................................................41 1 4. Configuration Ethernet Configuration.....................................................................................................................................43 Specifying an IP Address for IPv4 (No DHCP).......................................................................................... 44 Receiving an IP Address for IPv4 Automatically (DHCP).........................................................................46 Specifying an IP Address for IPv6 (No DHCP)..........................................................................................47 Receiving an IP Address for IPv6 Automatically (DHCP).........................................................................49 Setting the Ethernet Speed..........................................................................................................................51 5. Paper and Other Media Paper and Other Medias Supported by This Printer.....................................................................................53 Paper Recommendations.................................................................................................................................56 Loading Paper...................................................…

Text truncated - open the document above for the full version.

External photos of the EUT

Internal photos of the EUT

TEST REPORT 47 CFR FCC Part 15 Subpart B (Class B) Radio Frequency Devices – Unintentional Radiators – Limits and methods of measurement ANSI C63.4: 2009 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Report Reference No......................: TRE11100072 FCC ID..............................................: BBP-PRSP35101 Compiled by ( position+printed name+signature)..: File administrators Eric Zhang Supervised by ( position+printed name+signature)..: Test Engineer Tim Zhang Approved by ( position+printed name+signature)..: Manager Wenliang Li Date of issue.....................................: Nov 15, 2011 Testing Laboratory Name..............: Shenzhen Huatongwei International Inspection Co., Ltd Address ............................................: Keji Nan No.12 Road, Hi-tech Park, Shenzhen, China Testing location/ procedure ..............: Full application of Harmonised standards Partial application of Harmonised standards Other standard testing methods Applicant’s name............................: Ricoh Company Ltd. Address ............................................: 810, Shimoimaizum, Ebina-Shi, Kanagawa-ken, 243-0460 Japan Test specification: Standard ...........................................: 47 CFR FCC Part 15 Subpart B (Class B) ANSI C63.4: 2009 Non-standard test method..............: / Test Report Form No......................: HTWEMCFCC_1A TRF Originator..................................: Shenzhen Huatongwei International Inspection Co., Ltd Master TRF.......................................: Dated 2006-06 Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: Laser Printer Trade Mark .......................................: / Manufacturer ....................................: Ricoh Components＆Products(Shenzhen)Ltd． Model/Type reference.......................: Aficio SP 3500N, SP 3500N/Aficio SP 3500N, Aficio SP 3510DN, SP 3510DN/Aficio SP 3510DN Ratings .............................................: 120V 60Hz 10A 850W Result................................................: Positive V1.0 Page 2 of 41 Report No.: TRE11100072 FCC ID: BBP-PRSP35101 Shenzhen Huatongwei International Inspection Co., Ltd EMC -- T E S T R E P O R T Test Report No. : TRE11100072 Nov 15, 2011 ______________________________________________________________________________________________ Date of issue Equipment under Test : Laser Printer Model / Type : Aficio SP 3500N, SP 3500N/Aficio SP 3500N, Aficio SP 3510DN, SP 3510DN/Aficio SP 3510DN Listed Model : / Applicant : Ricoh Company Ltd. Address : 810, Shimoimaizum, Ebina-Shi, Kanagawa-ken, 243-0460 Japan Manufacturer : Ricoh Components＆Products(Shenzhen)Ltd． Address : RICOH industry group,Hao Ye Road,Heping Community,Fuyong Town,Baoan Distrist,Shenzhen,Guangdong,China Test Result according to the standards on page 4: Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. V1.0 Page 3 of 41 Report No.: TRE11100072 FCC ID: BBP-PRSP35101 Shenzhen Huatongwei International Inspection Co., Ltd Contents 1. TEST STANDARDS .................................................................... 4 2. SUMMARY............................................................................... 5 2.1. General Remarks: 5 2.2. Equipment under Test 5 2.3. EUT operation mode: 5 2.4. EUT configuration 5 3. TEST ENVIRONMENT ................................................................. 7 3.1. Address of the test laboratory 7 3.2. Test Facility 7 3.3. Environmental conditions 8 3.4. Test Description 8 3.5. Statement of the measurement uncertainty 8 3.6. Equipments Used during the Test 9 4. TEST CONDITIONS AND RESULTS .............................................. 10 4.1. Radiated Emission 10 4.2. Conducted Disturbance 25 5. EXTERNAL AND INTERNAL PHOTOS OF THE EUT ......................... 33 V1.0 Page 4 of 41 Report No.: TRE11100072 FCC ID: BBP-PRSP35101 Shenzhen Huatongwei International Inspection Co., Ltd 1. TEST STANDARDS The tests were performed according to following standards: 47 CFR FCC Part 15 Subpart B (Class B) Radio Frequency Devices – Unintentional Radiators – Limits and methods of measurement. ANSI C63.4: 2009 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz. V1.0 Page 5 of 41 Report No.: TRE11100072 FCC ID: BBP-PRSP35101 Shenzhen Huatongwei International Inspection Co., Ltd 2. SUMMARY 2.1. General Remarks: Date of receipt of test sample : Oct 17, 2011 Testing commenced on : Oct 17, 2011 Testing concluded on : Nov 15, 2011 2.2. Equipment under Test Power supply system utilised Power supply voltage : o 230V / 50 Hz o 115V / 60Hz o 12 V DC o 24 V DC „ Other (specified in blank below) AC 120V/60Hz 2.3. EUT operation mode: The equipment under test was operated during the measurement under the following conditions: Test program (customer specific) Emissions tests.............: 47 CFR FCC Part 15 Subpart B (Class B) and ANSI C63.4 2009, searching for the highest disturbance. 2.4. EUT configuration The following peripheral devices and interface cables were connected during the measurement: ● - supplied by the manufacturer ○ - supplied by the lab Test Configuration 1) Equipment under test Kind of equipment Manufacturer Model …

Text truncated - open the document above for the full version.

Test Setup Photos of the EUT