Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Complementary Cumulative Distribution Function (CCDF) Frequency Domain Time Domain UID Specification SheetUID 10220-CAE page 2 / 203.04.2023 Name:IEEE 802.11n (HT Mixed, 72.2 Mbps, 64-QAM) Group:WLAN UID:10221-CAE PAR: 1 8.27 dB MIF: 2 -16.16 dB Standard Reference:IEEE 802.11n-2009 Category:Random amplitude modulation Modulation:64-QAM Frequency Band:WLAN 2.4GHz (2412.0 - 2484.0 MHz) WLAN 5GHz (4915.0 - 5825.0 MHz) U-NII-1, U-NII-2A (5170 - 5330 MHz) U-NII-2C Standalone (5490 - 5710 MHz) U-NII-2C<5.65 GHz (5490 - 5650 MHz) U-NII-3 Standalone (5735 - 5835 MHz) U-NII-2C, U-NII-3 (5650 - 5835 MHz) U-NII-5 (5925 - 6425 MHz) U-NII-6 (6425 - 6525 MHz) U-NII-7 (6525 - 6875 MHz) U-NII-8 (6875 - 7125 MHz) U-NII-4 (5825 - 5925 MHz) Validation band (0.0 - 6000.0 MHz) Detailed Specification:Modulation: 64-QAM Data Rate: 72.2 Mbps PPDU Format: HT Mixed PPDU Type: 20 MHz MCS Index: 7 Guard Interval: Short Payload Length: 17962 Bandwidth:20.0 MHz Integration Time:2.0 ms 1 PAR (0.1%) in accordance with FCC KDB 971168, Section 6.0 ββMeasurement of the Peak-to-Average Power Ratio (PAPR)ββ 2 Modulation Interference Factor (MIF) value valid only in conjunction with advanced probe response linearization calibration for the same communication system (same UID and version). UID Specification SheetUID 10221-CAE page 1 / 203.04.2023 Complementary Cumulative Distribution Function (CCDF) Frequency Domain Time Domain UID Specification SheetUID 10221-CAE page 2 / 203.04.2023 Name:IEEE 802.11n (HT Mixed, 15 Mbps, BPSK) Group:WLAN UID:10222-CAE PAR: 1 8.06 dB MIF: 2 -17.00 dB Standard Reference:IEEE 802.11n-2009 Category:Random amplitude modulation Modulation:BPSK Frequency Band:WLAN 2.4GHz (2412.0 - 2484.0 MHz) WLAN 5GHz (4915.0 - 5825.0 MHz) U-NII-1, U-NII-2A (5170 - 5330 MHz) U-NII-2C Standalone (5490 - 5710 MHz) U-NII-2C<5.65 GHz (5490 - 5650 MHz) U-NII-3 Standalone (5735 - 5835 MHz) U-NII-2C, U-NII-3 (5650 - 5835 MHz) U-NII-5 (5925 - 6425 MHz) U-NII-6 (6425 - 6525 MHz) U-NII-7 (6525 - 6875 MHz) U-NII-8 (6875 - 7125 MHz) U-NII-4 (5825 - 5925 MHz) Validation band (0.0 - 6000.0 MHz) Detailed Specification:Modulation: BPSK Data Rate: 15 Mbps PPDU Format: HT Mixed PPDU Type: 40 MHz MCS Index: 0 Guard Interval: Short Payload Length: 3567 Bandwidth:40.0 MHz Integration Time:2.0 ms 1 PAR (0.1%) in accordance with FCC KDB 971168, Section 6.0 ββMeasurement of the Peak-to-Average Power Ratio (PAPR)ββ 2 Modulation Interference Factor (MIF) value valid only in conjunction with advanced probe response linearization calibration for the same communication system (same UID and version). UID Specification SheetUID 10222-CAE page 1 / 203.04.2023 Complementary Cumulative Distribution Function (CCDF) Frequency Domain Time Domain UID Specification SheetUID 10222-CAE page 2 / 203.04.2023 Name:IEEE 802.11n (HT Mixed, 90 Mbps, 16-QAM) Group:WLAN UID:10223-CAE PAR: 1 8.48 dB MIF: 2 -17.20 dB Standard Reference:IEEE 802.11n-2009 Category:Random amplitude modulation Modulation:16-QAM Frequency Band:WLAN 2.4GHz (2412.0 - 2484.0 MHz) WLAN 5GHz (4915.0 - 5825.0 MHz) U-NII-1, U-NII-2A (5170 - 5330 MHz) U-NII-2C Standalone (5490 - 5710 MHz) U-NII-2C<5.65 GHz (5490 - 5650 MHz) U-NII-3 Standalone (5735 - 5835 MHz) U-NII-2C, U-NII-3 (5650 - 5835 MHz) U-NII-5 (5925 - 6425 MHz) U-NII-6 (6425 - 6525 MHz) U-NII-7 (6525 - 6875 MHz) U-NII-8 (6875 - 7125 MHz) U-NII-4 (5825 - 5925 MHz) Validation band (0.0 - 6000.0 MHz) Detailed Specification:Modulation: 16-QAM Data Rate: 90 Mbps PPDU Format: HT Mixed PPDU Type: 40 MHz MCS Index: 4 Guard Interval: Short Payload Length: 21590 Bandwidth:40.0 MHz Integration Time:2.0 ms 1 PAR (0.1%) in accordance with FCC KDB 971168, Section 6.0 ββMeasurement of the Peak-to-Average Power Ratio (PAPR)ββ 2 Modulation Interference Factor (MIF) value valid only in conjunction with advanced probe response linearization calibration for the same communication system (same UID and version). UID Specification SheetUID 10223-CAE page 1 / 203.04.2023 Complementary Cumulative Distribution Function (CCDF) Frequency Domain Time Domain UID Specification SheetUID 10223-CAE page 2 / 203.04.2023 Name:IEEE 802.11n (HT Mixed, 150 Mbps, 64-QAM) Group:WLAN UID:10224-CAE PAR: 1 8.08 dB MIF: 2 -17.01 dB Standard Reference:IEEE 802.11n-2009 Category:Random amplitude modulation Modulation:64-QAM Frequency Band:WLAN 2.4GHz (2412.0 - 2484.0 MHz) WLAN 5GHz (4915.0 - 5825.0 MHz) U-NII-1, U-NII-2A (5170 - 5330 MHz) U-NII-2C Standalone (5490 - 5710 MHz) U-NII-2C<5.65 GHz (5490 - 5650 MHz) U-NII-3 Standalone (5735 - 5835 MHz) U-NII-2C, U-NII-3 (5650 - 5835 MHz) U-NII-5 (5925 - 6425 MHz) U-NII-6 (6425 - 6525 MHz) U-NII-7 (6525 - 6875 MHz) U-NII-8 (6875 - 7125 MHz) U-NII-4 (5825 - 5925 MHz) Validation band (0.0 - 6000.0 MHz) Detailed Specification:Modulation: 64-QAM Data Rate: 150 Mbps PPDU Format: HT Mixed PPDU Type: 40 MHz MCS Index: 7 Guard Interval: Short Payload Length: 36008 Bandwidth:40.0 MHz Integration Time:2.0 ms 1 PAR (0.1%) in accordance with FCC KDB 971168, Section 6.0 ββMeasurement of the Peak-to-Average Power Ratio (PAPR)ββ 2 Modulation Interference Factor (MIF) value valid only in conjunction with advanced probe response linearization calibration for the same communication system (same UID and version). UID Specification SheetUID 10224-CAE page 1 / 203.04.2023 Complementary Cumulative Distribution Function (CCDF) Frequency Domain Time Domain UID Specification SheetUID 10224-CAE page 2 / 203.04.2023 Name:UMTS-FDD (HSPA+) Group:WCDMA UID:10225-CAC PAR: 1 5.97 dB MIF: 2 -20.39 dB Standard Reference:3GPP Rel 7 TS 34.121 FCC OET KDB 941225 D01 SAR test for 3G devices v02 FCC OET KDB 941225 D02 Guidance for 3GPP R6 and R7 HSPA v02v01 Category:Random amplitude modulation Modulation:16QAM Frequency Band:Band 1 (1920.0 - 1980.0 MHz) Band 2 (1850.0 - 1910.0 MHz) Band 3 (1710.0 - 1785.0 MHz) Band 4 (1710.0 - 1755.0 MHz) Band 5 (824.0 - 849.0 MHz) Band 6 (830.0 - 840.0 MHz) Band 7 (2500.0 - 2570.0 MHz) Band 8 (880.0 - 915.0 MHz) Band 9 (1749.9 - 1784.9 MHzβ¦
Text truncated - open the document above for the full version.
Plot No. 1 UL Verification Services Inc. SAR Lab 19 Date/Time: June 26, 2026 at 02:07 T-Coil Signal Test Report: GSM-FDD (TDMA, GMSK) Device Under Test Manufacturer Model Dimensions [mm] Speaker Position [mm] 116.4 x 83.7 x 11.3 115.4 Hardware Setup Probe Name Probe Calibration Date DAE Name DAE Calibration Date AM1DV3 - 3165 March 10, 2026 DAE4ip Sn1882 October 15, 2025 Communication Systems Band Name Communication Systems Name Channel Frequency [MHz] PCS 1900 GSM-FDD (TDMA, GMSK) 512 1850.2 Grid Settings Extent X [mm] Extent Y [mm] Step X [mm] Step Y [mm] Distance [mm] 52.0 52.0 6.0 6.0 10.0 Results Audio File Measurement Duration [s] Margin Upper Bound [dB] Margin Lower Bound [dB] 48k_voice_300- 3000_2s.wav 2.0 2.0 2.0 Plot No. 2 UL Verification Services Inc. SAR Lab 19 Date/Time: June 26, 2026 at 02:07 T-Coil Signal Test Report: GSM-FDD (TDMA, GMSK) Device Under Test Manufacturer Model Dimensions [mm] Speaker Position [mm] 116.4 x 83.7 x 11.3 115.4 Hardware Setup Probe Name Probe Calibration Date DAE Name DAE Calibration Date AM1DV3 - 3165 March 10, 2026 DAE4ip Sn1882 October 15, 2025 Communication Systems Band Name Communication Systems Name Channel Frequency [MHz] PCS 1900 GSM-FDD (TDMA, GMSK) 512 1850.2 Grid Settings Extent X [mm] Extent Y [mm] Step X [mm] Step Y [mm] Distance [mm] 52.0 52.0 6.0 6.0 10.0 Results Audio File Measurement Duration [s] Gain [dB] H max [dB (A/m)] 48k_voice_1kHz_1s.wav 2.0 -12.47 11.85 Plot No. 3 UL Verification Services Inc. SAR Lab 19 Date/Time: June 26, 2026 at 02:15 T-Coil Noise Test Report: GSM-FDD (TDMA, GMSK) Device Under Test Manufacturer Model Dimensions [mm] Speaker Position [mm] 116.4 x 83.7 x 11.3 115.4 Hardware Setup Probe Name Probe Calibration Date DAE Name DAE Calibration Date AM1DV3 - 3165 March 10, 2026 DAE4ip Sn1882 October 15, 2025 Communication Systems Band Name Communication Systems Name Channel Frequency [MHz] PCS 1900 GSM-FDD (TDMA, GMSK) 512 1850.2 Grid Settings Extent X [mm] Extent Y [mm] Step X [mm] Step Y [mm] Distance [mm] 52.0 52.0 6.0 6.0 10.0 Results Secondary Group Point Count Secondary Group Max Longitudinal Secondary Group Max Transverse H max [dB (A/m)] 136 26 -6.61 Plot No. 4 UL Verification Services Inc. SAR Lab 19 Date/Time: T-Coil Coupling Mode Test Report: Results Primary Group Contiguous Point Count Secondary Group Point Count Secondary Group Max Longitudinal Secondary Group Max Transverse 31 136 15 26 Plot No. 5 UL Verification Services Inc. SAR Lab 19 Date/Time: June 18, 2026 at 01:05 T-Coil Signal Test Report: UMTS-FDD (HSPA+) Device Under Test Manufacturer Model Dimensions [mm] Speaker Position [mm] 116.4 x 83.7 x 11.3 115.4 Hardware Setup Probe Name Probe Calibration Date DAE Name DAE Calibration Date AM1DV3 - 3165 March 10, 2026 DAE4ip Sn1882 October 15, 2025 Communication Systems Band Name Communication Systems Name Channel Frequency [MHz] Band 2 UMTS-FDD (HSPA+) 9538 1907.6 Grid Settings Extent X [mm] Extent Y [mm] Step X [mm] Step Y [mm] Distance [mm] 52.0 52.0 6.0 6.0 10.0 Results Audio File Measurement Duration [s] Margin Upper Bound [dB] Margin Lower Bound [dB] 48k_voice_300- 3000_2s.wav 2.0 2.0 2.0 Plot No. 6 UL Verification Services Inc. SAR Lab 19 Date/Time: June 18, 2026 at 01:05 T-Coil Signal Test Report: UMTS-FDD (HSPA+) Device Under Test Manufacturer Model Dimensions [mm] Speaker Position [mm] 116.4 x 83.7 x 11.3 115.4 Hardware Setup Probe Name Probe Calibration Date DAE Name DAE Calibration Date AM1DV3 - 3165 March 10, 2026 DAE4ip Sn1882 October 15, 2025 Communication Systems Band Name Communication Systems Name Channel Frequency [MHz] Band 2 UMTS-FDD (HSPA+) 9538 1907.6 Grid Settings Extent X [mm] Extent Y [mm] Step X [mm] Step Y [mm] Distance [mm] 52.0 52.0 6.0 6.0 10.0 Results Audio File Measurement Duration [s] Gain [dB] H max [dB (A/m)] 48k_voice_1kHz_1s.wav 2.0 -10.68 10.56 Plot No. 7 UL Verification Services Inc. SAR Lab 19 Date/Time: June 18, 2026 at 01:16 T-Coil Noise Test Report: UMTS-FDD (HSPA+) Device Under Test Manufacturer Model Dimensions [mm] Speaker Position [mm] 116.4 x 83.7 x 11.3 115.4 Hardware Setup Probe Name Probe Calibration Date DAE Name DAE Calibration Date AM1DV3 - 3165 March 10, 2026 DAE4ip Sn1882 October 15, 2025 Communication Systems Band Name Communication Systems Name Channel Frequency [MHz] Band 2 UMTS-FDD (HSPA+) 9538 1907.6 Grid Settings Extent X [mm] Extent Y [mm] Step X [mm] Step Y [mm] Distance [mm] 52.0 52.0 6.0 6.0 10.0 Results Secondary Group Point Count Secondary Group Max Longitudinal Secondary Group Max Transverse H max [dB (A/m)] 550 26 -26.58 Plot No. 8 UL Verification Services Inc. SAR Lab 19 Date/Time: T-Coil Coupling Mode Test Report: Results Primary Group Contiguous Point Count Secondary Group Point Count Secondary Group Max Longitudinal Secondary Group Max Transverse 381 550 26 26 Plot No. 9 UL Verification Services Inc. SAR Lab 19 Date/Time: June 16, 2026 at 13:54 T-Coil Signal Test Report: LTE-FDD (SC-FDMA, 100% RB, 10 MHz, 16-QAM) Device Under Test Manufacturer Model Dimensions [mm] Speaker Position [mm] 116.4 x 83.7 x 11.3 115.4 Hardware Setup Probe Name Probe Calibration Date DAE Name DAE Calibration Date AM1DV3 - 3165 March 10, 2026 DAE4ip Sn1882 October 15, 2025 Communication Systems Band Name Communication Systems Name Channel Frequency [MHz] Band 12 LTE-FDD (SC-FDMA, 100% RB, 10 MHz, 16-QAM) 23095 707.5 Grid Settings Extent X [mm] Extent Y [mm] Step X [mm] Step Y [mm] Distance [mm] 52.0 52.0 4.0 4.0 10.0 Results Audio File Measurement Duration [s] Margin Upper Bound [dB] Margin Lower Bound [dB] 48k_voice_300- 3000_2s.wav 2.0 2.0 2.0 Plot No. 10 UL Verification Services Inc. SAR Lab 19 Date/Time: June 16, 2026 at 13:54 T-Coil Signal Test Report: LTE-FDD (SC-FDMA, 100% RB, 10 MHz, 16-QAM) Device Under Test Manufacturer Model Dimensions [mm] Speaker Position [mm] 116.4 x 83.7 x 11.3 115.4 Hardware Setup Probe Name Probe Calibration Date DAE Name DAE Calibration Date AM1DV3 - 3165 March 10, 2026 DAE4ip Sn1882 October 15, 2025 Communicatioβ¦
Text truncated - open the document above for the full version.
HAC T-COIL SIGNAL TEST REPORT FCC 47 CFR Β§ 20.19 ANSI C63.19-2019 For SMARTPHONE FCC ID: BCG-E9188A Model Name: A3447 Report Number: 16064952-S2V1 Issue Date: 7/13/2026 Prepared for APPLE INC. 1 APPLE PARK WAY CUPERTINO, CA 95014-2084 Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 319-4000 FAX: (510) 661-0888 Report No.: 16064952-S2V1 Issue Date: 7/13/2026 Page 2 of 35 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Revision History Rev. Date Revisions Revised By V1 7/13/2026 Initial Issue -- Report No.: 16064952-S2V1 Issue Date: 7/13/2026 Page 3 of 35 UL Verification Services Inc. Doc. No.: 1.0 This report shall not be reproduced without the written approval of UL Verification Services Inc. Table of Contents 1. Attestation of Test Results ................................................................................................................................ 4 2. Test Methodology ............................................................................................................................................... 5 3. Facilities and Accreditation ............................................................................................................................... 5 4. Test Equipment and Uncertainty ....................................................................................................................... 6 4.1. Test Equipment ........................................................................................................................................... 6 4.1.1. Base Station Simulator Software and Firmware ..................................................................................... 7 4.2. Measurement Uncertainty ........................................................................................................................... 8 5. Test Procedures for all Technologies ............................................................................................................... 9 5.1. Test Procedure for T-Coil signal per ANSI C63.19-2019, Β§6 ...................................................................... 9 5.2. Reference Input Levels per ANSI C63.19-2019, Β§6 .................................................................................. 11 5.3. Over the Top (OTT) ................................................................................................................................... 12 6. Calibrations & Gain Measurements ................................................................................................................ 14 6.1. Calibration of AM1DVx Probe.................................................................................................................... 14 6.1.1. Calibration Setup ................................................................................................................................... 14 6.1.2. Sensor Angle Alignment ........................................................................................................................ 14 6.1.3. System Response Calibration ............................................................................................................... 14 6.2. AMMI Audio Output Calibration ................................................................................................................. 14 6.3. Codec / System Delay Measurements ...................................................................................................... 15 6.4. Compute Gain Settings ............................................................................................................................. 15 6.5. Over the Top (OTT) ................................................................................................................................... 16 7. T-coil Measurement Criteria ............................................................................................................................. 17 7.1. Frequency Response ................................................................................................................................ 17 7.2. Coupling Mode Requirements ................................................................................................................... 18 7.3. Desired ABM Signal and Undesired ABM Field Requirements ................................................................. 19 7.3.1. Non-2G GSM Operating modes ............................................................................................................ 19 7.3.2. 2G GSM Operating modes .................................................................................................................... 19 8. Device Under Test ............................................................................................................................................. 20 8.1. Air Interfaces and Operating Mode ........................................................................................................... 20 9. Investigations (Codec & Air Interface) ............................................................................................................ 22 9.1. Codec Investigations ................................................................................................................................. 24 9.2. Air Interface Investigation .......................................................................................................................... 27 10. HAC (T-Coil) Test Results ........................................................................................................................... 29 10.1. Worst Case T-Coil Test Plot(s) .................................................................................................................. 31 Appendices ...........................................................β¦
Text truncated - open the document above for the full version.
FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 1 of 7 FCC Part 15 Antenna Gain Test Report Test Dates: 5/17/26 β 6/7/26 FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 2 of 7 Table of Contents 1. Scope .............................................................................................................................. 3 2. Reference Documents ...................................................................................................... 3 3. Test Personnel ................................................................................................................. 3 4. Test Equipment ............................................................................................................... 3 5. Commercial Test Software ............................................................................................... 3 6. Test Method .................................................................................................................... 4 7. MIMO Peak Gain Calculation ........................................................................................... 5 8. Typical Test Setup ............................................................................................................ 6 9. Test results ...................................................................................................................... 7 10. Antenna Photos or Drawings ....................................................................................... 7 11. Antenna Description .................................................................................................... 7 12. Revision History ........................................................................................................... 7 FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 3 of 7 1. Scope This test report demonstrates compliance with the antenna gain reporting requirements of FCC 2.1033(b)(7), 15.203, 15.212. 2. Reference Documents FCC 2.1033(b)(7), 15.203, 15.212 3. Test Personnel Test personnel are valued team members. Their expertise insures accurate test results. Their identities are considered confidential by Apple. 4. Test Equipment Test Equipment Critical Specifications Cal due date Antenna Measurement System Fully anechoic OTA chamber with dual- polarized measurement antenna, mechanical positioners of Theta and Phi axes, and RF path switching. Frequency Range. 8/8/25 Power Meter - R&S NRP Frequency Range, Power Input Range 8/8/25 5. Commercial Test Software The test equipment operates under the control of commercial test software. For OTA chambers sold by ETS Lindgren, EMQuest v1.14 is used. FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 4 of 7 6. Test Method EIRP measurement is based on industry-standard method described in CTIA OTA Test Plan (current version 3.9.4). Peak gain (Horizontal and Vertical Polarization) is calculated by subtracting Conducted Power from the measured maximum EIRP. Testing is performed with Antenna integrated in the product Below is the measurement summary from the specification: FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 5 of 7 7. MIMO Peak Gain Calculation For MIMO G(ΞΈ,Ο) calculations, correlated and uncorrelated gains are calculated at each (ΞΈ,Ο) using the following process. For each (band, channel) pair: The 3D EIRP pattern measured per antenna and per polarization, sampled on a 12 Γ 24 (ΞΈ, Ο) grid at 15Β° steps (elevation ΞΈ β {0Β°, 15Β°, ..., 165Β°}; azimuth Ο β {0Β°, 15Β°, ..., 345Β°}). The conducted power (dBm) at each antenna port for that channel, measured separately from the OTA pattern. For each antenna A β {LAT, UAT}, polarization p β {H, V}, and grid point (ΞΈ, Ο), the single-Tx antenna gain is obtained by subtracting the conducted power from the measured EIRP: G_A[p, ΞΈ, Ο] = EIRP_A[p, ΞΈ, Ο] β P_A,conducted All terms are in dB (EIRP and conducted power in dBm; gain in dBi). At every grid point, with the same polarization on both antennas, the two-antenna MIMO gains are computed as: Correlated(p, ΞΈ, Ο) = 10 Β· logββ [ ( 10^(G_UAT/20) + 10^(G_LAT/20) )Β² / N ] Uncorrelated(p, ΞΈ, Ο) = 10 Β· logββ [ ( 10^(G_UAT/10) + 10^(G_LAT/10) ) / N ] FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 6 of 7 where N = 2 is the number of transmit antennas. Independently for the Correlated and Uncorrelated grids, the reported peak is the max taken over the full (polarization, ΞΈ, Ο) search space (2 Γ 12 Γ 24 = 576 points). 8. Typical Test Setup The device containing the integral antenna is placed on the styrofoam pylon (inside the OTA chamber) as pictured below. EUT FCC Part 15 Antenna Gain Test Report Apple Inc. Provided By: Rev SHEET Abhishek Rala Version 1.0 Page 7 of 7 9. Test results See antenna gain exhibit 10. Antenna Photos or Drawings See internal photos exhibit 11. Antenna Description See technical description exhibit and antenna gain exhibit 12. Revision History Revision # Date Description of Change 1.0 March 10th, 2026 Original END OF DOCUMENT
V1.0 Apple Proprietary and Confidential 1 Antenna Gains (2Tx) Model(s): A3447, A3719, A3720, A3721 Band Freq (MHz) Correlated gain Un-Correlated gain H/V peak Corr (dBi) H/V peak Un-Corr (dBi) Wi-Fi 2.4 2412 -2.4 -5.4 Wi-Fi 2.4 2442 -2.2 -5.2 Wi-Fi 2.4 2472 -2.8 -5.8 Wi-Fi 5.0 5180 1.8 -1.2 Wi-Fi 5.0 5260 2.6 -0.3 Wi-Fi 5.0 5320 2.9 -0.1 Wi-Fi 5.0 5500 2.8 -0.2 Wi-Fi 5.0 5600 2.5 -0.5 Wi-Fi 5.0 5700 2.2 -0.6 Wi-Fi 5.0 5745 2.1 -0.5 Wi-Fi 5.0 5785 1.7 -0.8 Wi-Fi 5.0 5825 1.4 -0.9 Wi-Fi 6.0 5955 1.2 -1.2 Wi-Fi 6.0 6075 1.0 -1.0 Wi-Fi 6.0 6135 1.1 -1.0 Wi-Fi 6.0 6255 1.1 -1.0 Wi-Fi 6.0 6375 1.9 -0.4 Wi-Fi 6.0 6435 2.2 -0.3 Wi-Fi 6.0 6555 2.8 0.3 Wi-Fi 6.0 6675 2.9 0.3 Wi-Fi 6.0 6735 2.5 -0.2 Wi-Fi 6.0 6855 1.9 -1.1 Wi-Fi 6.0 6975 2.0 -1.0 Wi-Fi 6.0 7035 1.8 -1.2 Wi-Fi 6.0 7115 1.5 -1.5 Antenna Gains (2Tx State A) V1.0 Apple Proprietary and Confidential 1 Antenna Gains (2Tx) Model(s): A3447, A3719, A3720, A3721 Band Freq (MHz) Correlated gain Un-Correlated gain H/V peak Corr (dBi) H/V peak Un-Corr (dBi) Wi-Fi 2.4 2412 -0.7 -3.7 Wi-Fi 2.4 2442 -0.9 -3.9 Wi-Fi 2.4 2472 -1.7 -4.7 Wi-Fi 5.0 5180 2.4 -0.6 Wi-Fi 5.0 5260 3.1 0.1 Wi-Fi 5.0 5320 2.7 -0.3 Wi-Fi 5.0 5500 2.5 -0.4 Wi-Fi 5.0 5600 2.3 -0.7 Wi-Fi 5.0 5700 2.2 -0.6 Wi-Fi 5.0 5745 2.3 -0.3 Wi-Fi 5.0 5785 2.0 -0.5 Wi-Fi 5.0 5825 1.9 -0.5 Wi-Fi 6.0 5955 1.1 -1.2 Wi-Fi 6.0 6075 1.3 -0.8 Wi-Fi 6.0 6135 1.0 -0.9 Wi-Fi 6.0 6255 2.0 -0.4 Wi-Fi 6.0 6375 2.1 -0.4 Wi-Fi 6.0 6435 2.3 -0.1 Wi-Fi 6.0 6555 3.1 0.6 Wi-Fi 6.0 6675 3.1 0.5 Wi-Fi 6.0 6735 2.9 0.1 Wi-Fi 6.0 6855 2.3 -0.7 Wi-Fi 6.0 6975 1.9 -1.1 Wi-Fi 6.0 7035 2.0 -1.0 Wi-Fi 6.0 7115 1.5 -1.5 Antenna Gains (2Tx State B) V1.0 Apple Proprietary and Confidential 1 Antenna Gains (State A) Model(s): A3447, A3719, A3720, A3721 Wi-Fi/BT Antenna Gain: 1. Wi-Fi/BT 2.4GHz/ 802.15.4 (ANT 4); Type: IFA Band Frequency (MHz) Peak Gain (Horizontal/Vertical) (dBi) 2.4GHz 2412 -5.0 2442 -4.4 2472 -5.1 2. Wi-Fi/BT 2.4GHz/ 802.15.4 (ANT 3); Type: IFA Band Frequency (MHz) Peak Gain (Horizontal/Vertical) (dBi) 2.4GHz 2412 -4.4 2442 -4.3 2472 -4.9 3. Wi-Fi [5GHz/6GHz] / NB UNII/ 802.15.4ab-NB (ANT 6); Type: PIFA Band Frequency (MHz) Peak Gain (Horizontal/Vertical) (dBi) U-NII-1 5180 -1.6 U-NII-2A 5260 -1.4 5320 -1.5 U-NII-2C 5500 -1.0 5600 -1.3 5700 -1.0 U-NII-3 5745 -0.7 5785 -0.9 5825 -1.1 U-NII-5 5955 -1.9 6075 -2.6 6135 -2.7 6255 -2.6 6375 -2.5 U-NII-6 6435 -2.8 U-NII-7 6555 -3.6 V1.0 Apple Proprietary and Confidential 1 Band Frequency (MHz) Peak Gain (Horizontal/Vertical) (dBi) 6675 -3.4 6735 -3.3 6855 -1.8 U-NII-8 6975 -0.9 7035 -1.4 7115 -2.5 4. Wi-Fi [5GHz/6GHz] / NB UNII/ 802.15.4ab-NB Antenna Gain (ANT 5); Type: PIFA Band Frequency (MHz) Peak Gain (Horizontal/Vertical) (dBi) U-NII-1 5180 -0.8 U-NII-2A 5260 0.5 5320 1.0 U-NII-2C 5500 0.8 5600 0.7 5700 0.8 U-NII-3 5745 1.4 5785 1.3 5825 1.3 U-NII-5 5955 1.1 6075 1.6 6135 1.5 6255 1.5 6375 1.8 U-NII-6 6435 1.8 U-NII-7 6555 2.4 6675 2.4 6735 1.6 6855 -0.1 U-NII-8 6975 -0.2 7035 -0.3 7115 -0.4 V2.0 Apple Proprietary and Confidential 1 Antenna Gains (State B) Model(s): A3447, A3719, A3720, A3721 Wi-Fi/BT Antenna Gain: 1. Wi-Fi/BT 2.4GHz/ 802.15.4 (ANT 4); Type: IFA Band Frequency (MHz) Peak Gain (Horizontal/Vertical) (dBi) 2.4GHz 2412 -3.4 2442 -3.5 2472 -4.4 2. Wi-Fi/BT 2.4GHz/ 802.15.4 (ANT 3); Type: IFA Band Frequency (MHz) Peak Gain (Horizontal/Vertical) (dBi) 2.4GHz 2412 -3.7 2442 -3.6 2472 -4.3 3. Wi-Fi [5GHz/6GHz] / NB UNII/ 802.15.4ab-NB (ANT 6); Type: PIFA Band Frequency (MHz) Peak Gain (Horizontal/Vertical) (dBi) U-NII-1 5180 -1.0 U-NII-2A 5260 -0.6 5320 -1.1 U-NII-2C 5500 -0.9 5600 -0.5 5700 -0.5 U-NII-3 5745 -0.4 5785 -0.7 5825 -1.1 U-NII-5 5955 -2.2 6075 -2.1 6135 -1.9 6255 -2.3 6375 -2.7 U-NII-6 6435 -2.6 U-NII-7 6555 -3.0 V2.0 Apple Proprietary and Confidential 1 Band Frequency (MHz) Peak Gain (Horizontal/Vertical) (dBi) 6675 -3.2 6735 -2.7 6855 -1.5 U-NII-8 6975 -0.8 7035 -1.0 7115 -1.7 4. Wi-Fi [5GHz/6GHz] / NB UNII/ 802.15.4ab-NB Antenna Gain (ANT 5); Type: PIFA Band Frequency (MHz) Peak Gain (Horizontal/Vertical) (dBi) U-NII-1 5180 -0.2 U-NII-2A 5260 0.7 5320 0.4 U-NII-2C 5500 0.8 5600 0.7 5700 1.1 U-NII-3 5745 1.5 5785 1.6 5825 1.9 U-NII-5 5955 1.1 6075 1.8 6135 1.7 6255 1.8 6375 1.8 U-NII-6 6435 2.1 U-NII-7 6555 2.6 6675 2.6 6735 1.8 6855 0.1 U-NII-8 6975 -0.2 7035 -0.3 7115 -0.4
Name:IEEE 802.11ax (40MHz, MCS2, 99pc duty cycle) Group:WLAN UID:10709-AAC PAR: 1 8.33 dB MIF: 2 -18.46 dB Standard Reference:SPEAG Category:Random amplitude modulation Modulation:QPSK Frequency Band:WLAN 2.4GHz (2412.0 - 2484.0 MHz) WLAN 5GHz (4915.0 - 5825.0 MHz) U-NII-1, U-NII-2A (5170 - 5330 MHz) U-NII-2C Standalone (5490 - 5710 MHz) U-NII-2C<5.65 GHz (5490 - 5650 MHz) U-NII-3 Standalone (5735 - 5835 MHz) U-NII-2C, U-NII-3 (5650 - 5835 MHz) U-NII-5 (5925 - 6425 MHz) U-NII-6 (6425 - 6525 MHz) U-NII-7 (6525 - 6875 MHz) U-NII-8 (6875 - 7125 MHz) U-NII-4 (5.825 - 5.925 MHz) Validation band (0.0 - 6000.0 MHz) Detailed Specification:Bandwidth: 40MHz Duty Cycle: 99% Number of spatial stream: 1 Bandwidth:40.0 MHz Integration Time:0.6 ms 1 PAR (0.1%) in accordance with FCC KDB 971168, Section 6.0 ββMeasurement of the Peak-to-Average Power Ratio (PAPR)ββ 2 Modulation Interference Factor (MIF) value valid only in conjunction with advanced probe response linearization calibration for the same communication system (same UID and version). UID Specification SheetUID 10709-AAC page 1 / 204.09.2020 Complementary Cumulative Distribution Function (CCDF) Frequency Domain Time Domain UID Specification SheetUID 10709-AAC page 2 / 204.09.2020 Name:IEEE 802.11ax (40MHz, MCS3, 99pc duty cycle) Group:WLAN UID:10710-AAC PAR: 1 8.29 dB MIF: 2 -18.54 dB Standard Reference:SPEAG Category:Random amplitude modulation Modulation:16-QAM Frequency Band:WLAN 2.4GHz (2412.0 - 2484.0 MHz) WLAN 5GHz (4915.0 - 5825.0 MHz) U-NII-1, U-NII-2A (5170 - 5330 MHz) U-NII-2C Standalone (5490 - 5710 MHz) U-NII-2C<5.65 GHz (5490 - 5650 MHz) U-NII-3 Standalone (5735 - 5835 MHz) U-NII-2C, U-NII-3 (5650 - 5835 MHz) U-NII-5 (5925 - 6425 MHz) U-NII-6 (6425 - 6525 MHz) U-NII-7 (6525 - 6875 MHz) U-NII-8 (6875 - 7125 MHz) U-NII-4 (5.825 - 5.925 MHz) Validation band (0.0 - 6000.0 MHz) Detailed Specification:Bandwidth: 40MHz Duty Cycle: 99% Number of spatial stream: 1 Bandwidth:40.0 MHz Integration Time:0.6 ms 1 PAR (0.1%) in accordance with FCC KDB 971168, Section 6.0 ββMeasurement of the Peak-to-Average Power Ratio (PAPR)ββ 2 Modulation Interference Factor (MIF) value valid only in conjunction with advanced probe response linearization calibration for the same communication system (same UID and version). UID Specification SheetUID 10710-AAC page 1 / 204.09.2020 Complementary Cumulative Distribution Function (CCDβ¦
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15E | 6.12 GHz - 7.12 GHz | 21.00 mW |
| 2 | 15E | 6.11 GHz - 6.42 GHz | 400.00 Β΅W |
| 3 | 15E | 6.11 GHz - 6.42 GHz | 700.00 Β΅W |
| 4 | 15E | 6.11 GHz - 6.42 GHz | 1.40 mW |
Smartphone
Equipment Class
6VL - 15E 6 GHZ Very Low Power DeviceMagnetic Charging Cable
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzMagnetic Charger
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzMagnetic Charger
Equipment Class
DCD - Part 15 Low Power Transmitter Below 1705 kHzSmartphone
Equipment Class
PCE - PCS Licensed Transmitter held to ear