BCGA2925Apple iPad

 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: December 13, 2023 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia MD 21046d Attn: Equipment Authorization Branch Ref: FCC ID numbers To whom it may concern: I, the undersigned, hereby authorize Element Materials Technology to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Element Materials Technology on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Element Materials Technology as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; Model(s) FCC ID A2836 BCGA2836 A2837, A3006 BCGA2837 A2925 BCGA2925 A2926, A3007 BCGA2926  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

Apple Park, Cupertino, CA 95014 December 13, 2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: BCGA2836, BCGA2837, BCGA2925, BCGA2926 Apple Inc. (“Apple”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Apple certifies that, as of the date of the filing of the application, Apple is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

Apple Park, Cupertino, CA 95014 December 13, 2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation Grantee Code: BCG To whom it may concern: Apple Inc. (“Apple”) as required by section §2.911(d)(7), will also serve as the agent for service of process for the above referenced grantee code. Apple acknowledges that it will maintain an agent for no less than one year after Apple has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Apple further acknowledges its responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Contact person: Abhishek Rala Company name: Apple Inc. FCC FRN: 0005899216 Company Address: One Apple Park Way, Cupertino, CA 95014 Email: [email protected] Sincerely, Abhishek Rala Global Certification Manager Apple Inc.

 Apple Inc. One Apple Park Way Cupertino, CA www.apple.com Date: December 13, 2023 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID numbers To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), Apple Inc. hereby requests confidential treatment for documents filed with the Commission in connection with the application for equipment authorization referenced above. Long-Term Confidentiality Apple Inc. requests that the Commission withholds the following documents from public viewing indefinitely: • Block Diagrams • Electrical Schematic Diagrams • Technical Descriptions, Product Specifications • Antenna Gain, Antenna Locations • Tune-up Procedure • Software Security Description These documents reveal detailed technical and design information that is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed to the public even after commercial release of a device. As a result, disclosure of this Model(s) FCC ID A2836 BCGA2836 A2837, A3006 BCGA2837 A2925 BCGA2925 A2926, A3007 BCGA2926  Apple Inc. One Apple Park Way Cupertino, CA www.apple.com information by the Commission would harm Apple Inc. by giving competitors an unfair advantage even after commercial release of the device. Short-Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Apple Inc. requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: • External Photographs • Internal Photographs • Test Setup Photographs • User Manual These documents reveal technical and design information that has not been publicly disclosed in marketing materials and is protected by Apple Inc. as confidential and proprietary trade secrets. This information has been disclosed to those required to maintain its confidentiality and is not customarily disclosed publicly prior to the commercial release of the device. As a result, disclosure of this information by the Commission prior to commercial release would harm Apple Inc. by giving competitors an unfair market advantage. Apple Inc. believes the period of confidentiality requested is necessary to protect the information until the commercial release of a device. It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, ____________________ Abhishek Rala Apple Inc. Global Certification Manager [email protected]

A2925 Label Information Label Location The device has an integrated display screen that supports electronic labeling. The regulatory information is programmed in a secured manner such that neither users or third parties cannot modify it. Electronic Label Instructions to UserRegulatory Regulatory certification information is available on-device. Go to Settings > General > Legal & Regulatory. Additional regulatory information is in “Safety, handling, and support” in the iPad User Guide. Packaging LabelThe following regulatory information is also printed on the packaging A2925 FCC ID: BCGA2925 IC: 579C-A2925 One Apple Park Way, Cupertino, CA 95014 USA

FCC ID: BCGA2925 SAR EVALUATION REPORT Approved by: Technical Manager Document S/N: DUT Type: Page 1 of 131 1C2311270069-01.BCG-R1 Tablet Device REV 22.0 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. Applicant Name: Date of Testing: Apple Inc. One Apple Park Way Cupertino, CA 95014 USA 01/08/2024 –02/28/2024 Test Report Issue Date: 04/05/2024 Test Site/Location: Element, Morgan Hill, CA, USA Document Serial No.: 1C2311270069-01.BCG-R1 (Rev1) F C C I D : BCGA2925 A P P L I C A N T : A PPLE, INC. DUT Type: Tablet Device Application Type: Certification FCC Rule Part(s): CFR §2.1093 Models: A2925 Note: This revised Test Report supersedes and replaces the previously issued test report on the sane subject device for the same type of testing as indicated. Please discard or destroy the previously issued test report(s) and dispose of it accordingly. This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement procedures specified in Section 1.7 of this report; for North American frequency bands only. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Test results reported herein relate only to the item(s) tested. The SAR Tick is an initiative of the Mobile & Wireless Forum (MWF). While a product may be considered eligible, use of the SAR Tick logo requires an agreement with the MWF. Further details can be obtained by emailing: [email protected]. SAR 1g Body (W/kg) DTS 2.4 GHz WIFI 2412 - 2472 MHz 1.18 NII 5 GHz WIFI U-NII-1: 5180 - 5240 MHz U-NII-2A: 5260 - 5320 MHz U-NII-2C: 5500 - 5720 MHz U-NII-3: 5745 - 5825 MHz 1.18 6CD 6 GHz WIFI U-NII-5: 5935 - 6415 MHz U-NII-6: 6435 - 6515 MHz U-NII-7: 6535 - 6875 MHz U-NII-8: 6895 - 7115 MHz 1.18 DSS/DTS 2.4 GHz Bluetooth 2402 - 2480 MHz 1.18 DTS 802.15.4 2405 - 2475 MHz 1.18 NII NB U-NII 1 5152 - 5245 MHz 1.14 NII NB U-NII 3 5733 - 5844 MHz 1.18 DXX wPT 13.56 MHz <0.1 Simultaneous SAR per KDB 690783 D01v01r03: 1.59 Equipment Class Band & Mode Tx Frequency APD (W/m^2) 6CD 6 GHz WIFI U-NII-5: 5935 - 6415 MHz U-NII-6: 6435 - 6515 MHz U-NII-7: 6535 - 6875 MHz U-NII-8: 6895 - 7115 MHz 8.20 Equipment Class Band & Mode Tx Frequency Reported PD (W/m^2) 6CD 6 GHz WIFI U-NII-5: 5935 - 6415 MHz U-NII-6: 6435 - 6515 MHz U-NII-7: 6535 - 6875 MHz U-NII-8: 6895 - 7115 MHz 7.09 Equipment Class Band & Mode Tx Frequency Element Materials Technology (Formerly PCTEST) 18855 Adams Ct, Morgan Hill, CA 95037 USA Tel.408.538.5600 http://www.element.com SAR EVALUATION REPORT Prepared by: WKR:#000010107 Reviewed by: WKR:#0000005810 FCC ID: BCGA2925 SAR EVALUATION REPORT Approved by: Technical Manager Document S/N: DUT Type: Page 2 of 131 1C2311270069-01.BCG-R1 Tablet Device REV 22.0 Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from Element. If you have any questions or have an enquiry about obtaining additional rights to this report or assembly of contents thereof, please contact [email protected]. T A B L E O F C O N T E N T S 1 DEVICE UNDER TEST ................................................................................................................................ 3 2 INTRODUCTION ........................................................................................................................................ 32 3 DOSIMETRIC ASSESSMENT ................................................................................................................... 33 4 TEST CONFIGURATION POSITIONS ...................................................................................................... 34 5 RF EXPOSURE LIMITS ............................................................................................................................. 35 6 FCC MEASUREMENT PROCEDURES ..................................................................................................... 37 7 RF CONDUCTED POWERS ...................................................................................................................... 40 8 SYSTEM VERIFICATION ........................................................................................................................... 89 9 SAR DATA SUMMARY .............................................................................................................................. 96 10 FCC MULTI-TX AND ANTENNA SAR CONSIDERATIONS .................................................................... 110 11 SAR MEASUREMENT VARIABILITY ...................................................................................................... 124 12 EQUIPMENT LIST .................................................................................................................................... 125 13 MEASUREMENT UNCERTAINTIES ........................................................................................................ 126 14 CONCLUSION .......................................................................................................................................... 129 15 REFERENCES ..................................................................................................…

Text truncated - open the document above for the full version.

APPENDIX A: SAR TEST DATA A1 ELEMENT DUT: BCGA2925; Type: Portable Tablet; Serial: 9QXKO Communication System: UID:10415 - AAA, WLAN; MAIA: Y; Frequency: 2462.0 MHz Medium: 2450 Head; Medium parameters used: f = 2462.0 MHz; cond = 1.77 S/m; perm = 40.2; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0.00 mm Test Date: 01/16/2024; Ambient Temp: 20.6°C; Tissue Temp: 19.6°C Probe: EX3DV4 - SN7421; ConvF:(7.45,7.45,7.45); Calibrated: 2023-03-16 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn604; Calibrated: 2023-03-15 Phantom: Twin-SAM V8.0; Serial: 2070 Measurement SW: DASY Module SAR V16.2.0.1425 Mode: 2.4 GHz WIFI/ IEEE 802.11b, Antenna WF8, Variant 1, 22 MHz Bandwidth, Exp: Body SAR| Right Edge, Ch. 11, 1Mbps Area Scan (40.0 x 320.0): Measurement grid: dx=5.0 mm, dy=10.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=3.4 mm, dy=3.4 mm, dz=1.4 mm; Graded Ratio: 1.4 Reference Value = 1.09 W/kg; Power Drift = -0.02 dB Peak SAR (extrapolated) = 3.33 W/kg SAR(1 g) = 0.945 W/kg Smallest distance from peaks to all points 3 dB below is 4.8 mm Ratio of SAR at M2 to SAR at M1 = 68.9 % A2 ELEMENT DUT: BCGA2925; Type: Portable Tablet; Serial: WD0XN Communication System: UID:10544 - AAC, WLAN; MAIA: Y; Frequency: 5210.0 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5210.0 MHz; cond = 4.44 S/m; perm = 35.9; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0.00 mm Test Date: 01/08/2024; Ambient Temp: 19.0°C; Tissue Temp: 20.0°C Probe: EX3DV4 - SN3746; ConvF:(5.12,5.12,5.12); Calibrated: 2023-10-16 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1237; Calibrated: 2023-10-18 Phantom: Twin-SAM V8.0; Serial: 2027 Measurement SW: DASY Module SAR V16.2.0.1425 Mode: 5 GHz WIFI/ IEEE 802.11ac, Antenna WF8, Variant 2, 80 MHz Bandwidth, U-NII-1, Exp: Body SAR| Right Edge, Ch. 42, 29.3 Mbps Area Scan (40.0 x 320.0): Measurement grid: dx=5.0 mm, dy=10.0 mm Zoom Scan (22.0 x 22.0 x 22.0): Measurement grid: dx=2.6 mm, dy=2.6 mm, dz=1.2 mm; Graded Ratio: 1.2 Reference Value = 1.05 W/kg; Power Drift = 0.01 dB Peak SAR (extrapolated) = 6.13 W/kg SAR(1 g) = 1.11 W/kg Smallest distance from peaks to all points 3 dB below is 4.0 mm Ratio of SAR at M2 to SAR at M1 = 62.1 % A3 ELEMENT DUT: BCGA2925; Type: Portable Tablet; Serial: 4T6QV Communication System: UID:10755 - AAC, WLAN; MAIA: Y; Frequency: 6505.0 MHz Medium: 6000 Head; Medium parameters used: f = 6505.0 MHz; cond = 5.98 S/m; perm = 33.6; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0.00 mm Test Date: 01/08/2024; Ambient Temp: 21.5°C; Tissue Temp: 19.0°C Probe: EX3DV4 - SN7420; ConvF:(5.21,5.12,5.28); Calibrated: 2023-10-16 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1333; Calibrated: 2023-10-18 Phantom: Twin-SAM V4.0 (30deg probe tilt); Serial: 1275 Measurement SW: DASY Module SAR V16.2.0.1425 Mode: 6 GHz WIFI/ IEEE 802.11ax, Antenna WF7, Variant 1, 160 MHz Bandwidth, U-NII- 6, Exp: Body SAR| Back Side, Ch. 111, 68.1 Mbps Area Scan (255.0 x 323.0): Measurement grid: dx=8.5 mm, dy=8.5 mm Zoom Scan (22.0 x 22.0 x 22.0): Measurement grid: dx=2.8 mm, dy=2.8 mm, dz=1.2 mm; Graded Ratio: 1.2 Reference Value = 1.35 W/kg; Power Drift = -0.07 dB Peak SAR (extrapolated) = 6.57 W/kg SAR(1 g) = 1.12 W/kg; APD(4cm 2 ) = 7.09 W/m 2 Smallest distance from peaks to all points 3 dB below is 4.3 mm Ratio of SAR at M2 to SAR at M1 = 46.5 % A4 ELEMENT DUT: BCGA2925; Type: Portable Tablet; Serial: 41377 Communication System: UID:10032 - CAA, Bluetooth; MAIA: Y; Frequency: 2480.0 MHz Medium: 2450 Head; Medium parameters used: f = 2480.0 MHz; cond = 1.79 S/m; perm = 39.9; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0.00 mm Test Date: 01/08/2024; Ambient Temp:19.9°C; Tissue Temp: 19.2°C Probe: EX3DV4 - SN7421; ConvF:(7.45,7.45,7.45); Calibrated: 2023-03-16 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn604; Calibrated: 2023-03-15 Phantom: Twin-SAM V8.0; Serial: 2070 Measurement SW: DASY Module SAR V16.2.0.1425 Mode: 2.4 GHz Bluetooth, Antenna WF7, Variant 2, Exp: Body SAR| Back Side, Ch. 78, 1 Mbps Area Scan (260.0 x 320.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (33.6 x 33.6 x 30.0): Measurement grid: dx=2.4 mm, dy=2.4 mm, dz=1.5 mm; Graded Ratio: 1.5 Reference Value = 1.04 W/kg; Power Drift = 0.00 dB Peak SAR (extrapolated) = 4.77 W/kg SAR(1 g) = 1.10 W/kg Smallest distance from peaks to all points 3 dB below is 3.9 mm Ratio of SAR at M2 to SAR at M1 = 53.0 % A5 ELEMENT DUT: BCGA2925; Type: Portable Handset; Serial: MJ7F3 Communication System: UID:0 - -, CW; MAIA: Y; Frequency: 2405.0 MHz Medium: 2450 Head; Medium parameters used: f = 2405.0 MHz; cond = 1.71 S/m; perm = 40.4; density = 1000 kg/m3 Phantom Section: Flat; Space: 0.00 mm Test Date: 02/28/2024; Ambient Temp: 19.0°C; Tissue Temp: 19.5°C Probe: EX3DV4 - SN7416; ConvF:(7.27,7.27,7.27); Calibrated: 2023-05-08 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn701; Calibrated: 2023-05-11 Phantom: Twin-SAM V8.0; Serial: 2029 Measurement SW: DASY Module SAR V16.2.0.1425 Mode: 802.15.4, Antenna WF8, Variant 2, Exp: Body SAR| Right Edge, Ch. 11, 0.25 Mbps Area Scan (40.0 x 320.0): Measurement grid: dx=5.0 mm, dy=10.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=3.9 mm, dy=3.9 mm, dz=1.4 mm; Graded Ratio: 1.4 Reference Value = 1.25 W/kg; Power Drift = -0.02 dB Peak SAR (extrapolated) = 5.28 W/kg SAR(1 g) = 1.42 W/kg Smallest distance from peaks to all points 3 dB below is 4.3 mm Ratio of SAR at M2 to SAR at M1 = 59.0 % A6 ELEMENT DUT: BCGA2925; Type: Portable Tablet; Serial: 2F3VY Communication System: UID:10032 - CAA, CW; MAIA: Y; Frequency: 5789.0 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5789.0 MHz; cond = 5.20 S/m; perm = 35.0; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0.00 mm Test Date: 01/18/2024; Ambient Temp: 23.0°C; Tissue Temp: 20.1°C Probe: EX3DV4 - SN3746; ConvF:(4.59,4.59,4.59); Calibrated: 2023-10-16 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1237; Calibrated: 2023-10-18 Phantom: Twin-SAM V8.0; …

Text truncated - open the document above for the full version.

APPENDIX B: SAR DIPOLE VERIFICATION PLOTS B1 ELEMENT DUT: Dipole 13.0 MHz; Type: CLA-13 - SN1004 Communication System: UID: 0, CW; Frequency: 13.0 MHz Medium: 30 Head; Medium parameters used: f = 13.0 MHz; cond = 0.727 S/m; perm = 53.5; density = 1000 kg/m 3 Phantom Section: Flat; Space: 0 mm Test Date: 02/14/2024; Ambient Temp: 22.6°C; Tissue Temp: 21.9°C Probe: EX3DV4 - SN7360; ConvF:(17.98,17.98,17.98); Calibrated: 2023-03-16 Sensor-Surface: 1.4mm (All points) Electronics: DAE4 Sn534; Calibrated: 2023-03-15 Phantom: ELI V6.0; Serial: 2044 Measurement SW: DASY Module SAR V16.2.0.1425 13.0 MHz System Verification at 30.0 dBm (1000 mW) Area Scan (40.0 x 90.0): Measurement grid: dx=10.0 mm, dy=15.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=6.0 mm, dy=6.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Peak SAR (extrapolated) = 1.10 W/kg SAR(1 g) = 0.552 W/kg; SAR(10 g) = 0.341 W/kg Deviation (1 g) = -4.50%; Deviation (10 g) = -4.21% B2 ELEMENT DUT: Dipole 2450.0 MHz; Type: D2450V2 - SN921 Communication System: UID: 0, CW; Frequency: 2450.0 MHz Medium: 2450 Head; Medium parameters used: f = 2450.0 MHz; cond = 1.76 S/m; perm = 40.0; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10 mm Test Date: 01/08/2024; Ambient Temp:19.9°C; Tissue Temp: 19.2°C Probe: EX3DV4 - SN7421; ConvF:(7.45,7.45,7.45); Calibrated: 2023-03-16 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn604; Calibrated: 2023-03-15 Phantom: Twin-SAM V8.0; Serial: 2070 Measurement SW: DASY Module SAR V16.2.0.1425 2450.0 MHz System Verification at 20.0 dBm (100 mW) Area Scan (40.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=5.0 mm, dy=5.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Peak SAR (extrapolated) = 10.8 W/kg SAR(1 g) = 5.16 W/kg; SAR(10 g) = 2.42 W/kg Deviation (1 g) = -4.80%; Deviation (10 g) = -5.10% B3 ELEMENT DUT: Dipole 2450.0 MHz; Type: D2450V2 - SN921 Communication System: UID: 0, CW; Frequency: 2450.0 MHz Medium: 2450 Head; Medium parameters used: f = 2450.0 MHz; cond = 1.76 S/m; perm = 40.2; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10 mm Test Date: 01/16/2024; Ambient Temp: 20.6°C; Tissue Temp: 19.6°C Probe: EX3DV4 - SN7421; ConvF:(7.45,7.45,7.45); Calibrated: 2023-03-16 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn604; Calibrated: 2023-03-15 Phantom: Twin-SAM V8.0; Serial: 2070 Measurement SW: DASY Module SAR V16.2.0.1425 2450.0 MHz System Verification at 20.0 dBm (100 mW) Area Scan (40.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=5.0 mm, dy=5.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Peak SAR (extrapolated) = 10.3 W/kg SAR(1 g) = 5.09 W/kg; SAR(10 g) = 2.41 W/kg Deviation (1 g) = -6.09%; Deviation (10 g) = -5.49% B4 ELEMENT DUT: Dipole 2450.0 MHz; Type: D2450V2 - SN750 Communication System: UID: 0, CW; Frequency: 2450.0 MHz Medium: 2450 Head; Medium parameters used: f = 2450.0 MHz; cond = 1.74 S/m; perm = 40.4; density = 1000 kg/m3 Phantom Section: Flat; Space: 10 mm Test Date: 02/28/2024; Ambient Temp: 19.0-C; Tissue Temp: 19.5-C Probe: EX3DV4 - SN7416; ConvF:(7.27,7.27,7.27); Calibrated: 2023-05-08 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn701; Calibrated: 2023-05-11 Phantom: Twin-SAM V8.0; Serial: 2029 Measurement SW: DASY Module SAR V16.2.0.1425 2450.0 MHz System Verification at 20.0 dBm (100 mW) Area Scan (40.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (30.0 x 30.0 x 30.0): Measurement grid: dx=5.0 mm, dy=5.0 mm, dz=1.5 mm; Graded Ratio: 1.5 Peak SAR (extrapolated) = 10.5 W/kg SAR(1 g) = 4.95 W/kg; SAR(10 g) = 2.32 W/kg Deviation (1 g) = -5.89%; Deviation (10 g) = -5.31% B5 ELEMENT DUT: Dipole 5250.0 MHz; Type: D5GHzV2 - SN1123 Communication System: UID: 0, CW; Frequency: 5250.0 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5250.0 MHz; cond = 4.49 S/m; perm = 35.8; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10 mm Test Date: 01/08/2024; Ambient Temp: 19.0°C; Tissue Temp: 20.0°C Probe: EX3DV4 - SN3746; ConvF:(5.12,5.12,5.12); Calibrated: 2023-10-16 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1237; Calibrated: 2023-10-18 Phantom: Twin-SAM V8.0; Serial: 2027 Measurement SW: DASY Module SAR V16.2.0.1425 5250.0 MHz System Verification at 17.0 dBm (50 mW) Area Scan (40.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (22.0 x 22.0 x 22.0): Measurement grid: dx=4.0 mm, dy=4.0 mm, dz=1.4 mm; Graded Ratio: 1.4 Peak SAR (extrapolated) = 13.8 W/kg SAR(1 g) = 3.76 W/kg; SAR(10 g) = 1.08 W/kg Deviation (1 g) = -6.58%; Deviation (10 g) = -5.68% B6 ELEMENT DUT: Dipole 5250.0 MHz; Type: D5GHzV2 - SN1123 Communication System: UID: 0, CW; Frequency: 5250.0 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5250.0 MHz; cond = 4.59 S/m; perm = 36.0; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10 mm Test Date: 01/18/2024; Ambient Temp: 23.0°C; Tissue Temp: 20.1°C Probe: EX3DV4 - SN3746; ConvF:(5.12,5.12,5.12); Calibrated: 2023-10-16 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1237; Calibrated: 2023-10-18 Phantom: Twin-SAM V8.0; Serial: 2027 Measurement SW: DASY Module SAR V16.2.0.1425 5250.0 MHz System Verification at 17.0 dBm (50 mW) Area Scan (40.0 x 80.0): Measurement grid: dx=10.0 mm, dy=10.0 mm Zoom Scan (22.0 x 22.0 x 22.0): Measurement grid: dx=4.0 mm, dy=4.0 mm, dz=1.4 mm; Graded Ratio: 1.4 Peak SAR (extrapolated) = 13.5 W/kg SAR(1 g) = 3.71 W/kg; SAR(10 g) = 1.07 W/kg Deviation (1 g) = -7.83%; Deviation (10 g) = -6.55% B7 ELEMENT DUT: Dipole 5600.0 MHz; Type: D5GHzV2 - SN1123 Communication System: UID: 0, CW; Frequency: 5600.0 MHz Medium: 5200-5800 Head; Medium parameters used: f = 5600.0 MHz; cond = 4.88 S/m; perm = 35.2; density = 1000 kg/m 3 Phantom Section: Flat; Space: 10 mm Test Date: 01/08/2024; Ambient Temp: 19.0°C; Tissue Temp: 20.0°C Probe: EX3DV4 - SN3746; ConvF:(4.45,4.45,4.45); Calibrated: 2023-10-16 Sensor-Surface: 1.4mm (VMS + 6p) Electronics: DAE4 Sn1237; Calibrated: 2023-10-18 Phantom: Tw…

Text truncated - open the document above for the full version.

A P P E N D I X C : P R O B E A N D D I P O L E C A L I B R A T I O N C E R T I F I C A T E S 12/14/2022 YW 12/13/2023 Object: Date Issued: Page 1 of 4 D2450V2 – SN: 921 11/09/2022 Certification of Calibration Object D2450V2 – SN: 921 Calibration procedure(s) Procedure for Calibration Extension for SAR Dipoles. Extended Calibration date: November 09, 2022 Description: SAR Validation Dipole at 2450 MHz. Calibration Equipment used: Measurement Uncertainty = ±23% (k=2) Name Function Signature Calibrated By: Arturo Oliveros Associate Compliance Engineer Approved By: Kaitlin O’Keefe Managing Director Manufacturer Model Description Cal Date Cal Interval Cal Due Serial Number Agilent 8753ES S-Parameter Vector Network Analyzer 12/17/2021 Annual 12/17/2022 MY40000670 Agilent E4438C ESG Vector Signal Generator 3/24/2022 Annual 3/24/2023 MY45093678 Amplifier Research 15S1G6 Amplifier CBT N/A CBT 343972 Anritsu ML2495A Power Meter 3/17/2022 Annual 3/17/2023 0941001 Anritsu MA2411B Pulse Power Sensor 3/2/2022 Annual 3/2/2023 1126066 Anritsu MA2411B Pulse Power Sensor 3/28/2022 Annual 3/28/2023 1339007 Traceable 4040 90080-06 Therm./ Clock/ Humidity Monitor 5/11/2022 Biennial 5/11/2024 221514974 Control Company 4353 Long Stem Thermometer 9/10/2021 Biennial 9/10/2023 210774685 Agilent 85033E 3.5mm Standard Calibration Kit 6/21/2022 Annual 6/21/2023 MY53402352 Mini-Circuits VLF-6000+ Low Pass Filter DC to 6000 MHz CBT N/A CBT N/A Narda 4772-3 Attenuator (3dB) CBT N/A CBT 9406 Mini-Circuits ZHDC-16-63-S+ 50-6000MHz Bidirectional Coupler CBT N/A CBT N/A Pasternack NC-100 Torque Wrench 3/19/2022 Annual 3/19/2023 N/A SPEAG DAK-3.5 Dielectric Assessment Kit 4/11/2022 Annual 4/11/2023 1323 SPEAG EX3DV4 SAR Probe 3/22/2022 Annual 3/22/2023 7421 SPEAG EX3DV4 SAR Probe 1/19/2022 Annual 1/19/2023 3837 SPEAG DAE4 Dasy Data Acquisition Electronics 3/22/2022 Annual 3/22/2023 604 SPEAG DAE4 Dasy Data Acquisition Electronics 1/13/2022 Annual 1/13/2023 793 Element Materials Technology Morgan Hill 18855 Adams Ct, Morgan Hill, CA 95037 USA Tel. +1.410.290.6652 / Fax +1.410.290.6654 http://www.element.com Object: Date Issued: Page 2 of 4 D2450V2 – SN: 921 11/09/2022 DIPOLE CALIBRATION EXTENSION Per KDB 865664 D01, calibration intervals of up to three years may be considered for reference dipoles when it is demonstrated that the SAR target, impedance and return loss of a dipole have remained stable according to the following requirements: 1. The measured SAR does not deviate more than 10% from the target on the calibration certificate. 2. The return-loss does not deviate more than 20% from the previous measurement and meets the required 20dB minimum return-loss requirement. 3. The measurement of real or imaginary parts of impedance does not deviate more than 5Ω from the previous measurement. The following dipole was checked to pass the above 3 requirements to have 2-year calibration period from the calibration date: Calibration Date Extension Date Certificate Electrical Delay (ns) Certificate SAR Target Head (1g) W/kg @ 20.0 dBm Measured Head SAR (1g) W/kg @ 20.0 dBm Deviation 1g (%) Certificate SAR Target Head (10g) W/kg @ 20.0 dBm Measured Head SAR (10g) W/kg @ 20.0 dBm Deviation 10g (%) Certificate Impedance Head (Ohm) Real Measured Impedance Head (Ohm) Real Difference (Ohm) Real Certificate Impedance Head (Ohm) Imaginary Measured Impedance Head (Ohm) Imaginary Diff…

Text truncated - open the document above for the full version.