BCR-IONEUAPION-E

ION ® -E Series PRELIMINARY User's Manual M0201A0A DISCLAIMER: This document has been developed by CommScope, and is intended for the use of its customers and customer support personnel. The information in this document is subject to change without notice. W hile every effort has been made to eliminate errors, CommScope disclaims liability for any diffi culties arising from the interpretation of the information contained herein. The information contained herein does not claim to cover all details or variations in equipment, nor to provide for every possible incident to be met in connec tion with installation, operation, or maintenance. This document describes the performance of the product under the defined operational conditions and does not cover the performance under adverse or disturbed conditions. Should further information be desired, or should particular problems arise which are not covered sufficiently for the purchaser’s purposes, contact CommScope. CommScope reserves the right to change all hardware and software characteristics without notice. COPYRIGHT: © Copyright 2014 CommScope Inc. All Rights Reserved. This document is protected by copyright. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical photocopying, recording, or otherwise without the prior written permission of CommScope. For patents see www.cs-pat.c om . TRADEMARKS All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope. Names of products mentioned herein are used for identification purposes only and may be trademarks and / or registered trademarks of their respective companies. Andrew W ireless Systems GmbH, 09-February-2015 1. General 1.1. DCCS Technical Support For technical assistance and support, please contact the DCCS technical support team. Email: [email protected] +1 888-297-6433 in North and South America and +49 9099-69-333 in Europe, Middle East and Asia 1.2. Equipment Symbols Used / Compliance Please observe the meanings of the following symbols used in this equipment: Symbol Complia nce Meaning --- FCC WARNING: This is NOT a CONSUMER device. It is designed for inst alla tion by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. You MUST regist er Class B signal boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signal- boosters/registration. Alert sign to R&TTE To be sold exclusive ly to mobile operators or authorize d inst allers – no harmonised frequency bands, operation requires license CE Intended use: EU and EFTA countries Indicates conformity with the R&TTE direct ive 1999/5/EC certified by the notified body no. 0700. M0201A0A_uc User’s Manual for ION ® -E Page 2 1. General 1.3. Health and Safety 1. Warning: A High leakage current ground (earth) connection to the power supply subrack is ess ential before connecting the supply. 2. Caution: Laser radiation. Risk of eye injury in operation. Do not stare into the beam; do not view it direct ly or with optical inst ruments. 3. Caution: High frequency radiation in operation. Risk of health hazards ass ociated with radiation from the antenna(s) connected to the unit. Implement prevention measures to avoid the poss ibility of close proximity to the antenna(s) while in operation. 1.4. Property Damage Warnings 1. Attention: Due to power diss ipation, the power supply units may reach a very high temperature if not properly ventilated. Do not operate this equipment on or close to flammable materials. 2. Notice: ESD precautions must be observed. Before commencing maintenance work, use the available grounding (earthing) system to connect ESD protect ion measures. 3. Notice: Keep operating instructions within easy reach and make them available to all users. 4. Notice: Only license holders for the respective frequency range are allowed to operate this unit. 5. Notice: Read and obey all the warning labels attached to the unit. Make sure that all warning labels are kept in a legible condition. Replace any missing or damaged labels. 6. Notice: Make sure the unit’s setti ngs are correct for the intended use (refer to the manufact urer product information) and regulatory requirements are met. Do not carry out any modifications or fit any spare parts, which are not sold or recommended by the manufacturer. 1.5. Complia nce 1. Warning! This is class A equipment. This equipment can cause radio interference in domest ic areas. In this case the operator can be asked to st art preventive act ion. 2. Notice: For i nst alla tions, which have to comply with FCC RF exposure requirements, the antenna selection and inst allation must be completed in a way to ensure compliance with those FCC requirements. Depending on the RF frequency, rated output power, antenna gain, and the loss between the repeater and antenna, the minimum dist ance D to be maintained between the antenna location and human beings is calculated according to this formula: 3. Notice: For inst allations which have to comply with European EN50385 exposure compliance requirements, the follo wing Power Density limits/guidelines (W/M²) according to ICNIRP are va lid: a. 2 for frequencies from 10 MHz to 400 MHz b. F (MHz) / 2000 for frequencies from 400 MHz to 2 GHz c. 10 for frequencies from 2 GHz to 300 GHz 4. Notice: Notice: For installations which have to comply with FCC/Industry Canada requirements: English This device complies with FCC Part 15. Operation is subject to the follo wing two conditions: (1) this device may not cause interference, and (2) this device must acc ept any interference, including interference that may cause undesired operation of the device. This device complie s with Health Canada’s Safety Code. The inst aller of this devic…

Text truncated - open the document above for the full version.

02 December 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation Letter per KDB 935210 D02 Clause IV The warning label message will be shown in online and point packaging of the device. Sincerely, Michael Shumate Andrew/CommScope 620 N Greenfield Parkway Garner, NC 27529 919-329-8941 FCC Attestation Letter Attestation Letter per KDB 935210 D02 Clause IV, Industrial (Part 20) Signal Booster Specifics, Paragrap The warning label message will be shown in online and point-of-sale marketing materials and on the outside Booster Specifics, Paragraph d) sale marketing materials and on the outside

4 March 2015 Nemko Canada Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 FCC ID: BCR-IONEUAP Product Name: ION-E UAP Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held under long term confidentiality : • Schematics • Block diagram • Technical/Operation Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 4th Day of March 20 15 By: Michael Shumate Signature Printed Title: Vice President, Business Operations - Americas On behalf of : Wireless Innovations, Corp Telephone: +1 919 329 8940

ION-E UAP Tune up Procedure The gain for the ION-E UAP is automatically set by the system based upon the input power detected. Output power is a fixed value defined in a user table. The user shall not provide an input power exceeding the limits of the input device. The user does not need to take any action to tune the system. 620 N Greenfield Parkway Garner, NC 27529 +1 800 982 1708 www.commscope.com

P dBmP mWG dBiEIRP dBmEIRP mWERP mWPD mW/cm^2PD limt mW/cm^2 18639275013060.100.49 18635232001220.041.00 PD= GP/(4πR^2) R=20 cm Frequency MHz 728 1930 - 2690 1.1310 / RSS-102 Issue 4 Radiofrequency radiation exposure limits mW/cm^2 0.49 1.00 PD limt W/m^2 4.9 10.0

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation FCC Part 27 (746–757 MHz LTE band).docx; Date: Aug 2014 SCC Accredited LAB LAB Accrédité CCN TM ONE WORLDOURAPPROVAL Test report 267266-1TRFWL Date of issue: March 5, 2015 Applicant: Andrew Wireless Innovations Group Product: ION-E Model: UAP FCC ID: BCR-IONEUAP Specification: FCC 47 CFR Part 27 Miscellaneous wireless communications services Report reference ID: 267266-1TRFWL Page 2 of 33 Test location Company name Nemko Canada Inc. Address 303 River Road City Ottawa Province Ontario Postal code K1V 1H2 Country Canada Telephone +1 613 737 9680 Facsimile +1 613 737 9691 Toll free +1 800 563 6336 Website www.nemko.com Site number FCC test site registration number: 176392, IC: 2040A-4 (3 m semi anechoic chamber) Tested by Kevin Rose, Wireless/EMC Specialist Reviewed by Andrey Adelberg, Senior Wireless/EMC Specialist Date March 5, 2015 Signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 267266-1TRFWL Page 3 of 33 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications .................................................................................................................................................................................................... 4 1.3 Statement of compliance ......................................................................................................................................................................................... 4 1.4 Exclusions ................................................................................................................................................................................................................. 4 1.5 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 27 test results ............................................................................................................................................................................................ 5 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Sample information .................................................................................................................................................................................................. 6 3.2 EUT information ....................................................................................................................................................................................................... 6 3.3 Technical information .............................................................................................................................................................................................. 6 3.4 Product description and theory of operation ........................................................................................................................................................... 6 3.5 EUT exercise details .................................................................................................................................................................................................. 6 3.6 EUT setup diagram ................................................................................................................................................................................................... 7 Section 4. Engineering considerations .................................................................................................................................................................. 8 4.1 Modifications incorporated in the EUT..................................................................................................................................................................... 8 4.2 Technical judgment ..................................................................................................…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation FCC Part 27 (728–764 MHz LTE band).docx; Date: Aug 2014 SCC Accredited LAB LAB Accrédité CCN TM ONE WORLDOURAPPROVAL Test report 267266-2TRFWL Date of issue: March 5, 2015 Applicant: Andrew Wireless Innovations Group Product: ION-E Model: UAP FCC ID: BCR-IONEUAP Specification: FCC 47 CFR Part 27 Miscellaneous wireless communications services Report reference ID: 267266-2TRFWL Page 2 of 30 Test location Company name Nemko Canada Inc. Address 303 River Road City Ottawa Province Ontario Postal code K1V 1H2 Country Canada Telephone +1 613 737 9680 Facsimile +1 613 737 9691 Toll free +1 800 563 6336 Website www.nemko.com Site number FCC test site registration number: 176392, IC: 2040A-4 (3 m semi anechoic chamber) Tested by Kevin Rose, Wireless/EMC Specialist Reviewed by Andrey Adelberg, Senior Wireless/EMC Specialist Date March 5, 2015 Signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 267266-2TRFWL Page 3 of 30 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications .................................................................................................................................................................................................... 4 1.3 Statement of compliance ......................................................................................................................................................................................... 4 1.4 Exclusions ................................................................................................................................................................................................................. 4 1.5 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 27 test results ............................................................................................................................................................................................ 5 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Sample information .................................................................................................................................................................................................. 6 3.2 EUT information ....................................................................................................................................................................................................... 6 3.3 Technical information .............................................................................................................................................................................................. 6 3.4 Product description and theory of operation ........................................................................................................................................................... 6 3.5 EUT exercise details .................................................................................................................................................................................................. 6 3.6 EUT setup diagram ................................................................................................................................................................................................... 7 Section 4. Engineering considerations .................................................................................................................................................................. 8 4.1 Modifications incorporated in the EUT..................................................................................................................................................................... 8 4.2 Technical judgment ..................................................................................................…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation FCC Part 27 (2100–2155 MHz LTE UMTS band).docx; Date: Aug 2014 SCC Accredited LAB LAB Accrédité CCN TM ONE WORLDOURAPPROVAL Test report 267266-3TRFWL Date of issue: March 5, 2015 Applicant: Andrew Wireless Innovations Group Product: ION-E Model: UAP FCC ID: BCR-IONEUAP Specification: FCC 47 CFR Part 27 Miscellaneous wireless communications services Report reference ID: 267266-3TRFWL Page 2 of 38 Test location Company name Nemko Canada Inc. Address 303 River Road City Ottawa Province Ontario Postal code K1V 1H2 Country Canada Telephone +1 613 737 9680 Facsimile +1 613 737 9691 Toll free +1 800 563 6336 Website www.nemko.com Site number FCC test site registration number: 176392, IC: 2040A-4 (3 m semi anechoic chamber) Tested by Kevin Rose, Wireless/EMC Specialist Reviewed by Andrey Adelberg, Senior Wireless/EMC Specialist Date March 5, 2015 Signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 267266-3TRFWL Page 3 of 38 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications .................................................................................................................................................................................................... 4 1.3 Statement of compliance ......................................................................................................................................................................................... 4 1.4 Exclusions ................................................................................................................................................................................................................. 4 1.5 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 27 test results ............................................................................................................................................................................................ 5 Section 3. Equipment under test (EUT) details ..................................................................................................................................................... 6 3.1 Sample information .................................................................................................................................................................................................. 6 3.2 EUT information ....................................................................................................................................................................................................... 6 3.3 Technical information .............................................................................................................................................................................................. 6 3.4 Product description and theory of operation ........................................................................................................................................................... 6 3.5 EUT exercise details .................................................................................................................................................................................................. 6 3.6 EUT setup diagram ................................................................................................................................................................................................... 7 Section 4. Engineering considerations .................................................................................................................................................................. 8 4.1 Modifications incorporated in the EUT..................................................................................................................................................................... 8 4.2 Technical judgment ...........................................................................................…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by the Standards Council of Canada. The tests included in this report are within the scope of this accreditation FCC Part 22H 869–894 MHz band; Date: August 2014 SCC Accredited LAB LAB Accrédité CCN TM ONE WORLDOURAPPROVAL Test report 267266-4TRFWL Date of issue: March 5, 2015 Applicant: Andrew Wireless Innovations Group Product: ION-E Model: UAP FCC ID: BCR-IONEUAP Specifications: FCC 47 CFR Part 22H Public Mobile Services Subpart H – Cellular Radiotelephone Service Report reference ID: 267266-4TRFWL Page 2 of 34 Test location Company name Nemko Canada Inc. Address 303 River Road City Ottawa Province Ontario Postal code K1V 1H2 Country Canada Telephone +1 613 737 9680 Facsimile +1 613 737 9691 Toll free +1 800 563 6336 Website www.nemko.com Site number FCC test site registration number: 176392, IC: 2040A-4 (3 m semi anechoic chamber) Tested by Kevin Rose, Wireless/EMC Specialist Reviewed by Andrey Adelberg, Senior Wireless/EMC Specialist Date March 5, 2015 Signature Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contain in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: 267266-4TRFWL Page 3 of 34 Table of contents Table of contents .......................................................................................................................................................................................................... 3 Section 1. Report summary ................................................................................................................................................................................. 4 1.1 Applicant and manufacturer .................................................................................................................................................................................... 4 1.2 Test specifications .................................................................................................................................................................................................... 4 1.3 Statement of compliance ......................................................................................................................................................................................... 4 1.4 Exclusions ................................................................................................................................................................................................................. 4 1.5 Test report revision history ...................................................................................................................................................................................... 4 Section 2. Summary of test results ....................................................................................................................................................................... 5 2.1 FCC Part 22 test results .................................................................…

Text truncated - open the document above for the full version.