BEJ9QKE40630HDD/DVD Recorder

HDD/DVD RECORDER OWNER’S MANUAL MODEL: RH1999M Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. RH1999M_OM_EVENT 2 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface.This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to. CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION:The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION:CLASS 2M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING:TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 3 Introduction FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This epuipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the product and receiver. •Connect the product into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. FCC COMPLIANCE:The responsible party for this product’s compliance is: LG Electronics U.S.A., Inc.,1000 Sylvan Avenue, Englewood Cliffs, NJ. Phone: 1-800-243-0000. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. 4 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future reference. 3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to. 4. Follow all instructions. - All operating and use instructions should be followed. 5. Do not use this product near water. – For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swimming pool; and other areas located near water. 6. Clean only with dry cloth. – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. - Slots and openings in the cabinet are provided for…

Text truncated - open the document above for the full version.

Attn: Reviewing Engineer Federal Communications Commission. 7435 Oakland Mills Road Columbia, MD 21046 RE: CONFIDENTIALITY REQUEST FOR HDD/DVD Recorder FCC ID: BEJ9QKE40630 MODEL #: TADS-H102F TCMN0682PA26C To Whom It May Concern: This letter served as an official request for confidentiality under FCC Rule section 0.459. We have requested that the schematic diagrams and block diagram required to be submitted with this application be withheld from public review. These documents contains detailed system and equipment description and related information about the product which LG Electronics Inc. considers to be proprietary, confidential, and a custom design and, otherwise would not release to the general public. Since this design is a basis from which future technological products will evolve, LG Electronics Inc. feels that this information would be of benefit to its competitors, and that the disclosure of the information in these document would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Jonghoon Park/ Chief Engineer January 12, 2006 LG Electronics Inc. Digital Media Company [email protected] LG Electronics Inc.

DOC-FCC007-5 11/24/2004 Customer Application Form- FCC Page1 FCC GRANT OF EQUIPMENT AUTHORIZATION APPLICATION Complete and return to: [email protected] 1. Applicant’s complete, legal business name: LG Electronics Inc. LG Electronics Inc., Digital Media Company, DM Standards Gr. 19-1, Cheongho-Ri, Jinwuy-Myun, Pyungtaek-Shi, Kyunggi-do 2. Applicant’s Mailing Address: 451-713, Korea Name/Title: Jonghoon Park/Chief Research Engineer Telephone: +82-31-610-5335~8 3.Applicant Technical Point of Contact: E-mail Address: [email protected] 4. Manufacturer’s complete, legal business name: (if different from applicant) 5. Manufacturer’s mailing address (if different from applicant): 6. Grantee Code: (All applicants must have one - if you do not, we will assist you in obtaining one) BEJ 7. Equipment Product Code (14 characters max - only use capital letters and numbers): 9QKE40630 8. Class II Permissive Change? (Applies only if the equipment listed in the application has been previously authorized by the FCC.) *YES or NO *Provide details of what has changed on this previously approved equipment (complete Appendix A.3: FCC Permissive Change 1 Application Letter) 9. Is CONFIDENTIALITY requested? *YES or NO *If yes, then attach formal letter of request which details the items to be held confidential. The type of information that the FCC allows to be held confidential is proprietary information that the customer could not obtain by purchasing the equipment. (Example - internal photos are not held confidential due to the customer being able to open the device and take internal pictures). An example of the required letter is attached, as is the FCC Rule Section detailing what the letter should include (be sure to quote this particular rule section in your letter.) 10. *Agent Authorization Letter (required - an example is attached) 11. Description of Product as Marketed (required - attach as separate document or use space provided below): This device is a HDD and DVD recorder built in Tuner with modulator which has 3 and 4 CH RF output and HDD record and play various type of DISC. 11. Equipment will be operated under FCC Rule Part(s): (list all rule parts) FCC Part 15 Complete and return to: [email protected]

1.Front of the EUT 2.Rear of the EUT Location of ID Label 3.Bottom of EUT 4. FCC requirement of the Rear side

1.Inner of the EUT 2.Main Board 3.IO Board 4.LGIT Tuner (TADS-H102F) 5.Inner of the LGIT Tuner 6.Samsung Tuner(TCMN0682PA26C) 7.Inner of the Samsung Tuner

2005.02.23 Y.S RO 2005.02.23 H.D KIM 2005.02.23 H.R Lee 2005.02.23 Y.S RO 2005.02.23 H.D KIM 2005.02.23 H.R LEE 2005.02.23 H.D KIM 2005.02.23 H.R. Lee 2005.02.23 Y. S. Ro “” ... ... ’ ... “” ² ² ’ ’ ² “” ² ““ E E

          



      



     



                    



                    



               



             



                     



    



                          



           
         
      
      
 
          !    " ! #  $% $%   %     &
 '     &
 
& %  $%
   (  $%    
&'    
& ᜔ ᜔᜔ ᜔ᜉ ᜉᜉ ᜉᜀ ᜀᜀ ᜀᜑ ᜑᜑ ᜑᜑ ᜑᜑ ᜑᚖ ᚖᚖ ᚖᜅ ᜅᜅ ᜅᚔ ᚔᚔ ᚔᚙ ᚙᚙ ᚙᚖ ᚖᚖ ᚖᚔ ᚔᚔ ᚔᜂ ᜂᜂ ᜂᚖ ᚖᚖ ᚖᚕ ᚕᚕ ᚕᚒ ᚒᚒ ᚒᜇ ᜇᜇ ᜇᜇ ᜇᜇ ᜇᜉ ᜉᜉ ᜉᜆ ᜆᜆ ᜆᜓ ᜓᜓ ᜓᚖ ᚖᚖ ᚖᚕ ᚕᚕ ᚕ

                           



                     
     



                       



                  



    



                           







                      






                                           !"   #  $   %  &  '(  !) ) * (  !"   ( +) )                                       ! !! !               " "" "                               # ## #                 $ $$ $ % %% %    ! !! !     ! !! !                                          !  ) )   ) ) ) & && &       ' '' '                                       ( (( (   ) )) )                                 * ** *     + ++ +      , ,, , &     &   $) & , $) - -- -          ) )) )    $ $$ $       . .. .   / // /



             - . ) "     - ) "     - (  "     -   "     0 00 0   ! !! !                      -  /  ) 0  - 1 $   0 !) $) )   1 11 1     / // /                2 3 "     2  1 "     2 ) "                    2 22 2        3 33 3          4 )$   1  4   ) 4     )                 4 44 4             4 44 4                          



                       



                  



    



                           







                      




 
                                   
1! + 5 6    1.  $ 7)      )
  %    )$ "   !89## #+8:; ) &2!89-4 #+8:;
6  8 )     $
 %   " :  1  $
3)  $$ < 3==   : 9 # 5 #4 >8: 5 & #>8:;
!< ) ) )  '      )                                       



!!                                          



        !                        



         







     + ++ +     4 44 4          / // /    5 55 5 VHF lowCH.2~CH.B55.25~127.25MHz VHF highCH.C~CH.W+11133.25~361.25MHz UHFCH.W+12~CH.69367.25~801.25MHz            



                       ! !! !   



    



6 66 6



       Picture Carrier45.75 Color Carrier42.17 Sound Carrier41.25     " "" "     



     # ## #               



          




1  )$  $   ? *#䒅
1 ) )$  $   ? *#䒅     $ $$ $   % %% %               







     % %% %   & && &               




 !8 ? (3 9& #+8:;
 !8 ? @ 9&* #+8:; 7 ) )  3 (  9!8;



                       



                  



    



                           







                      




 




                                                   



        



               



         



             RF MOD F-CO…

Text truncated - open the document above for the full version.

TADS-H102F, TCMN0682PA26C Test Report Test Report No. : 4521-060112LS 1/33 REPORT FOR A TV INTERFACE DEVICE Scope – Measurement and determination of electromagnetic emission (EME) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission. RF MODULATOR Manufacturer 1: LG Innotek Co., Ltd. Model No. : TADS-H102F Manufacturer 2 : Samsung Electric Co., Ltd. Model No. : TCMN0682PA26C TADS-H102F, TCMN0682PA26C Test Report Test Report No. : 4521-060112LS 2/33 PART I INTRODUCTION 1. GENERAL INFORMATION 5 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST 1.2 REGULATIONS APPLIED TO THE EUT 1.3 MEASUREMENT PROCEDURE 1.4 MEASUREMENT SITE 2. GENERAL TEST CONDITIONS 6 2.1 OPERATING CONDITION OF EUT 2.2 STABILIZATION OF EUT OPERATING 2.3 TEMPERATURE 3. TEST SITE 6 3.1 OPEN AREA TEST SITE 3.2 A SHIELDED ENCLOSURE 4. MEASURING INSTRUMENTATIONS AND CALIBRATIONS 7 5. DESCRIPTION OF TEST CONDITION 7 5.1 POWER LINE CONDUCTED EMISSIONS 7 5.2 RADIATED EMISSIONS 8 5.3 OUTPUT SIGNAL MEASUREMENTS 9 5.3.1 OUTPUT SIGNAL LEVEL MEASUREMENTS 5.3.2 OUTPUT TERMINAL CONDUCTED SPURIOUS EMISSION MEASUREMENTS 5.4 TRANSFER SWITCH ISOLATION MEASUREMENTS 10 6. MEASURING INSTRUMENTS AND SET-UP 11 6.1 POWER LINE CONDUCTED EMISSIONS 11 6.2 RADIATED EMISSIONS 11 6.3 OUTPUT SIGNAL MEASUREMENTS 11 6.4 TRANSFER SWITCH ISOLATION MEASUREMENTS 12 6.5 VITS SIGNAL GENERATOR ; COMMONLY USED. 12 TADS-H102F, TCMN0682PA26C Test Report Test Report No. : 4521-060112LS 3/33 PART II TEST DATA 1. CONDUCTED EMISSIONS 14 2. RADIATED EMISSIONS 17 3. OUTPUT SIGNAL LEVEL MEASUREMENTS 18 4. OUTPUT TERMINAL CONDUCTED SPURIOUS EMISSION MEASUREMENTS 19 5. TRANSFER SWITCH ISOLATION MEASUREMENTS 21 APPENDIX A PHOTOGRAPH OF TEST SET-UP 22 APPENDIX B LIST OF TEST EQUIPMENT 24 APPENDIX C LIST OF SUPPORT DEVICE & ACCESSORIES IN THE TEST 25 APPENDIX D LABELLING REQUIREMENTS 26 TADS-H102F, TCMN0682PA26C Test Report Test Report No. : 4521-060112LS 4/33 PART I INTRODUCTION TADS-H102F, TCMN0682PA26C Test Report Test Report No. : 4521-060112LS 5/33 1. GENERAL INFORMATION 1.1 DESCRIPTIONS OF EQUIPMENT UNDER TEST( EUT) 1.1.1 Manufacture PT. LG Electronics Display Devices Indonesia Block G, MM2100 Industrial Town, Cikarang Barat, Bekasi 17520, West Java,Indonesia 1.1.2 Applicant LG Electronics Inc.; 20, YOIDO-DONG YOUNGDUNGPO-GU, SEOUL, 150-721, KOREA 1.1.3 MODEL Name TADS-H102F,TCMN0682PA26C 1.1.4 SERIAL NO NOT ATTACHED 1.1.5 TRADE NAME LG 1.1.6 FCC ID NO BEJ9QKE40630 1.1.7 DESCRIPTIONS a) Product Type HDD/DVD Recorder b) RF Output Channel Channel 3 and 4 c) RF IN/OUT Terminal Impedance 75 ohms (Unbalance F-type coaxial) d) Number of RF IN/OUT terminal 1EA at each e) Terminal for signal Video/Audio in/out with RCA-type jacks f) Power Supply AC120V, 60Hz 1.1.8 Accessories connected to the EUT a) Video Coaxial cable for RF-OUT terminal provided by manufacture b) Video/Audio cables 1.2 Regulations applied to the EUT .. FCC Part 15.115 1.3 Measurement Procedure ..... MP-3 : ANSI C63.4 : 2003 1.4 Measurement site description z Location of measurement facility LG Electronics Inc : Pyungtaek plant Digital-Media Standards Team 19-1, Cheongho-Ri,Jinwuy-Myun,Pyungtak - Shi, 451-713 Korea Note; The detailed description of measuring facility was found to be in compliance With Federal Communications Commission requirements of 2.948 according to ANSI C63.4 on June 27, 2003. TADS-H102F, TCMN0682PA26C Test Report Test Report No. : 4521-060112LS 6/33 2. GENERAL TEST CONDITIONS The test data contained in this report was obtained by use of the measurement method recommended in FCC Rules, 47 C.F.R. 15.31(a)(3), with equipment and at the test site filed by the Federal Communications Commission (FCC). The technical standard for a TV interface device are set forth in Subpart B of Part 15 of FCC Rules and regulation. The measurement for Radiated Emissions, Power line Conducted Emissions, Output signal levels, Output Terminal Conducted Spurious Emissions and Transfer Switch Isolation were performed in accordance with the procedures described in ANSI C63.4 : 2003. 2. 1 OPERATING CONDITIONS OF THE EUT According to the requirements in Subpart B of Part 15, the measurement is made at each function of the EUT being connected with appropriate cables and loads. This HDD/ DVD Recorder combination have the tuner with modulators mentioned test report and either a video/audio output terminal in RCA-type plugs and antenna input terminal. Therefore, every measurement was investigated in the operation modes, 1)Playing Mode, 2) Recording Mode, 3) Recording NTSC TV signal supplied through the at antenna input terminal at each Ch. 3 or/and 4 for each mode applicable. 2. 2 STABILIZATION OF EUT OPERATION The EUT was operated for sufficient minutes before testing to make it stabilized in a normal operating condition. The power supplied to the EUT was filtered to meet the requirements. 2. 3 TEMPERATURE Measurement procedure recommended by FCC requires the test to be performed at the site with ambient temperature within 10 to 40 degrees centigrade (50 to 104 F ). The specification for operating temperature of EUT is from 5 to 35 degrees centigrade (41 to 95 F ) as described in owner's manual. The measurement data in this report was obtained at the temperature in the range of 15 ~ 20 degrees centigrade. 3. TEST SITE 3. 1 OPEN AREA TEST SITE Measurement of radiated emissions from EUT was made at open area test site, a description of which has been submitted to the FCC pursuant to Part 15 of 47 C.F.R., 2.948. 3 .2 A SHIELDED ENCLOSURE. All other measurements, including power line conducted emissions, output signal levels, and transfer switch isolation, and transfer switch isolation were made in a shielded enclosure providing sufficient shielding effectiveness. TADS-H102F, TCMN0682PA26C Test Report Test Report No. : 4521-060112LS 7/33 4. MEASURING INSTRUMENTATIONS AND CALIBRATIONS. Measurements of output signal l…

Text truncated - open the document above for the full version.