BEJMR50001WFUSWLAN UNIT

LGE Internal Use Only WLAN UNIT & Accessories WLAN UNIT WLAN UNIT Holder Screw(2ea) 1 / 8 LGE Internal Use Only WLAN UNIT setting(Connection) Smart Washing Machine WLAN UNIT connected to Washing Machine ※ To ensure com p liance with FCC RF ex p osure re q uirements, this 2 / 8 ppq device must be installed in a location where the antenna of the device will have a minimum distance of at least 10 cm LGE Internal Use Only 4. Set the requirement of Wi-Fi Modem which is on the product ih hi h dSi d bl 1. Access LG Smart Server Homepage with computer ( http://www.smartthinQ.com ) and register ID and d WLAN UNIT setting(Smart Phone ) w i t h pus hi ng t h e ” Pro d uct S ett i ng Mo d e ” b e l ow. passwor d . 21 2. Apply purchased WLAN UNIT to Smart Washing Machine, push the reservation button for more than3 sec. after turning on the washing machine. shows ‘ Wi - Fi Setting mode with “ Ting ” sound. 234 ① Check the product is ‘Washing Machine’② Choose Wireless router(AP) that is currently being used for User AP(Input the password and connect if Wireless router(AP) has security application.) ③ ID/PW : mandator y information 제품이 등록되지 않았습니다 . 제품 등록 방법은제품 등록하는 방법 버튼을 눌러 확인할 수 있습니다 . shows Wi Fi Setting mode with Ting sound. Wi-Fi Setting Mode Access Wi-Fi Modem setting mode with Smart Phone or Laptop. or y (ID/PW of LG Smart Server registration)* Name : In case of using several product, Give name to distinguish easily(Optional) ④ Check the registered information and click the Register Button to complete the registration. Smart phone and Product show the completion message as below. 확인할 수 있습니다 . 3. Touch the ‘Wi-Fi set ’ button below and choose ‘ LG_Smart_Laundry ’ among Wi-Fi Network. When state h“C td” bkt ti ith IP : 192.168.120.254SSID : LG_Smart_Laundry Wi-Fi Setting Mode Wi-Fi Setting has completed. 네트워크는차단되니제품등록완료는제품 표시부를 s h ows “C onnec t e d” , come b ac k t o curren t i mage w ith using back button of smart phone. Product registering Network will be disconnected,Check the product 제품 표시부를 확인하시기바랍니다 . Check the product showing part for register completion. or <Product showing part> <Smart Phone image> Product Setting Mode Wi-Fi Set 3 / 8 WLAN UNIT Setting (Product) <Wi-Fi Settin g for Product ( Refer the bottom ) > g( ) <WLAN UNIT Setting and Reception check> 18:88 shows Error type when it is failed, or Set mode entering has canceled without any setting (Cancel in Web or App) • User contacts the Setup mode and save the SSID/Password and use r’s information for product registration. • Enter Wi-Fi Setting Mode after pu shing Time Delay or Delay Wash (W) / Time Dry for 3 sec. • Pushing Long Key(product button is not operating at this condi tion) shows Wi-Fi condition(L0(Unconnected), L1L2L3(connection intensity) displayed on 18:88) If WLAN UNIT is not installed nothing is on the 18:88 while the operation <WLAN UNIT Setting and Reception check> L1 , L2 , L3(connection intensity) displayed on 18:88) . If WLAN UNIT is not installed , nothing is on the 18:88 while the operation . Wi - Fi Setting Mode Wi Fi Setting Mode Wi Fi Setting Mode Wi - Fi Setting Mode Wi-Fi 설정 중.. Wi - Fi Setting Mode Wi - Fi Setting Mode Connection with smart phone or lab top From exterior Entering User’s information :SSID/Password LED shows End on 18:88Changed to stand by mode automatically. Set on 18:88 Set on 18:88 - Using mode is changed when Setting is completed. LED shows ntE (network Error, Fail) mode on18:88. changed to stand by mode automatically.l 3 sec. later Entering failure Same as power on condition. Victor Panel 4 / 8 Smart Grid Function Application <Function Definition> Smart on - electric product is operating with DR Signal from electric Power company(Hyb, Cloud included). - Follow AHAM standardFollow AHAM standard . - DR Signal Acceptable with Smart On button activated and Modem is in. - When DR signal is in, receive DL/SR separately(Duration time >10 : DL else SR) with this signal product is operating Smart on time >10 : DL else SR) , with this signal product is operating Delay Start and Energy Save motion by itself. But for this product, do not guide to customers 1. Place Smart on (provisional)button (Long Key(more than 3 sec.) of Signal butto n) and Smart on LED on the product Panel. 2. Check Modem is in , push the smart button, then Smart On LED turns on . If Modem is not in, Smart On LED never turns on when p ushin g Smart On Button. pg 3. Inner Algorithm(Smart Grid relat ed signal processing, AHAM base d) is same as Rocky2 TFT LCD standard. 4. Modem Reset function is needed and can be defined as below. With Power On, Operate with Wi-Fi Setting Key + pus hing signal for more than 6 sec. rSt(reset) on 18:88 and blink, show End when completed. If rSt and End is within 1~2 sec., rSt blinks when Reset has do ne normally. After completion, it doesn’t go off before customer sets “power off”. When this status continues for 4 min., it goes off automatically like product’s basic operatio n. f I f Wi-Fi Modem is not in, it may not enter to Modem Reset Mode. Victor Panel 5 / 8 Smart Diagnosis Final saved Diagnosis factor sends to server when pushing the Smart Diagno sis button(Washing Final saved Diagnosis factor sends to server when pushing the Smart Diagnosis button(Washing machine: water temp. dryer: temp.) In case of Audible, information of 1 cycle only will be sent be cause of time restra int(sending takes about 15 sec.) Wi - Fi also send the final saved diagnosis factor to server Wi - Fi also send the final saved diagnosis factor to server .  Function Definition by detailed using Scene will be identified after additional consulting. Application will be also identifie d after additional consulting .  Wi - Fi also can check  Wi - Fi also can check . 6 / 8 <Function Definition> Smart Access <Function Definition> : Access and Adapt is available after WLAN UNIT Setting complet ion. In case of going out or getting to work after operating Washing Machine, Smart Phone can power off or monitor washing machine. …

Text truncated - open the document above for the full version.

LG Electronics USA 1000 Sylvan Avenue. Enelewood Cliffs, NJ 07632. USA Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: BEJMR50001WFUS Pursuant to Sections 0.457 and 0.459 of the Commission's Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type Schematics Pans list Block diagram Operational Description(Theory of Operation) File Name CONF APPENDIX MR50001 WF.GMSEEUS Schem.pdf CONF APPENDIX MR50001 WF.GMSEEUS PartsLst.pdf CONF APPENDIX MR50001 WF.GMSEEUS BlkDia.pdf CONF APPENDIX MR50001 WF.GMSEEUS OpDes.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission's public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type External Photos Internal Photos Sincerely, Christopher Johrisdn / Sr. Manager E-mail : [email protected] Rev 11/20/07 File Name CONF APPENDIX MR50001 WF.GMSEEUS ExtPho.pdf CONF APPENDIX MR50001 WF.GMSEEUS lntPho.pdf

i/*e I IQA 1000 Sylvan Avenue. IC5 UOM Englewood Cliffs. NJ 07632. USA POWER OF ATTORNEY DATE:Oct05.2011 Federal Communications Commission Authorization and Evaluation Division 7435 Oskland Mills Road. Columbia. MD 21046 To Whom It May Concern : We the undersigned, hereby authorize Korea EMC Laboratory Co., Ltd. on our behalf, to apply to the FEDERAL COMMUNICATIONS COMMISSION on our equipment. Any and all acts carried out by Korea EMC Laboratory Co., Ltd. on our behalf shall have the same effect as acts of our own. This authorization expires on OCT 05. 2012. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. LG Electronics USA V^ Christopher Johnson/Br. Manager E-mail : [email protected]

External Photographs

Internal Photographs of EUT

KRS-A-021(Rev.00) (주) 가람 솔루션 APPROVAL SHEET 고 객 명 한빛전자 업 체 명 KARAM SOLUTION 제 품 명 KRS-COMBO-WA 모 델 명 MR50001WF 제 출 일 자 2011년 07월 26일 제 품 사 진 길이: 166.21mm 직경:9.20mm 부 서 담 당 검 토 승인 회 로 손호철 / 전임 정창우 / 책임 기 구 김종남 / 선임 김진석 / 책임 품 질 이윤석 / 전임 이진우 / 수석 본사 :경기도 시흥시 은행동 249 신창테크노타운 TEL: 031)312-9577 / FAX: 031)312-9670 연구소 : 서울시 금천구 가산동 448 대륭테크노타운3차 905호 TEL: 02)1661-9577 / FAX: 02)2107-7299 안테나 규격서 문서번호 KRS-AA-0047 REV. 가람 솔루션 00 DATE 2011-07-26 한빛전자 MODEL MR50001WF TYPE External Ant PAGE PAGE 1 KRS-A-021(Rev.00) (주) 가람 솔루션 Contents 1. 제품사양 변경 이력 - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 1.1 승인원 이력 List ------------------------------------------------------------------------------- 2 2. 회로 사항 --- - - - - --- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 2.1 전기적 요구 사항 ------------------------------------------------------------------------------- 3 2.1.1 Set 전기적 사양 -------------------------------------------------------------------------------- 3 2.1.3 복사패턴 -- - -- - - - - -- - -- - - - - -- - - ------------------------------------------------------------- - ---- 5 2.1.4 안테나 이득--------------------- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 2.2 시험 조건 ----------------------------------------------------------------------------------------- 7 2.2 . 1 시험환경(조건/방법)------------------------------------------------------------------------- 7 2.2.2 시험장비 ------ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7 3. 기구 사항 --- --- --- -- --- ---- --- --- --- --- ---- ---- --- ---- --- --- --- ---- --- ---- ------- --- --- --- ---- --- 8 3.1 재질 증명서 -------------------------------------------------------------------------------------- 8 3.2 기구적 요구 사항 ------------------------------------------------------------------------------- 9 3 .2.1 기구도면 -- - -- - - - - -- - -- - - ---------------------------------------- - - - - -- - - - - -- - - -- - - - - - - -- - - - - -- - - 9 3 .2.2 포장 사양 및 도면 -------------------------------------------------------------------------- 10 3 . 2.3 비틀림 시험 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 3 . 2.4 인장 시험 - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 3 . 2.5 낙하 시험 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 3 . 2.6 B E N D I N G 시험 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 3 . 2.7외관 시험 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14 4. 품질 사항 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15 4.1 품질 요구 사항 - ------------------------------------------------------------------------- 15 4.1.1 치수( CT Q 포함) - -- - - -- - - -- - -- - -- - -- - -- - - -- - -- - -- - - ------ - -- - -- - -- - -- - - -- - -- - -- - - -- - - -- - -- - -- - 15 4.1.2제조공정도 ------------------------------------------------------------------------------------ 16 4.1.3 열충격 ------ - - - - - ------- - - - - - -- - - - - - --- - - - - - -- - - -- - - - - - - - - - -- - - - - -- -- - - -- - -- - - -- - - - - - - - - - -- - - - - 17 4.1.4 고온고습 -------------------------------------------------------------------------------------- 17 4.1.5 고온저장 -------------------------------------------------------------------------------------- 18 4.1.6 저온저장 -------------------------------------------------------------------------------------- 18 4.1.7 염수분무 -------------------------------------------------------------------------------------- 18 4.2 ROHS성적서 -------------------------------------------------------------------------------------- 19 4.2.1 유해물질 성분 분석표 ---------------------------------------------------------------------- 57 안테나 규격서 문서번호 KRS-AA-0047 REV. 가람 솔루션 00 DATE 2011-07-26 한빛전자 MODEL MR50001WF TYPE External Ant PAGE PAGE 2 KRS-A-021(Rev.00) (주) 가람 솔루션 1.1 승인원 이력 LIST 승인원 이력 LIST NO REV 한빛전자 개정 전REV (날짜) 개정 후REV (날짜) 상세개정 및 변경 내용 수량 요청 부서 진행 단계 1 00 2011-07-26 승인용 30EA 개발 2 3 4 5 6 7 8 9 10 안테나 규격서 문서번호 KRS-AA-0047 REV. 가람 솔루션 00 DATE 2011-07-26 한빛전자 MODEL MR50001WF TYPE External Ant PAGE PAGE 3 KRS-A-021(Rev.00) (주) 가람 솔루션 2.1전기적 요구 사항 2.1.1 Set 전기적 사양(정재파비 포함) 안테나는 전기적 사양에 명시되어 있는 정재파비 요구 사항을 만족해야 한다. - SET 거치 상태 Electrical Spec. 주파수 (Frequency Range) WiFi 2400MHz 2440MHz 2485MHz 정재파(V.S.W.R) 3.0이하 3.0이하 3.0이하 이득 (Peak GAIN) E2-Plane 기준 1.0dBi이상 0.0dBi이상 -0.5dBi이상 이득 (Average GAIN) H-Plane 기준 -6.5dBi이상 -7.0dBi이상 -6.0dBi이상 공칭 임피던스 50 ohms 편파 수직 복사 패턴 OMNI DIRECTIONAL 최대 입력 전력 2 Watts 안테나 규격서 문서번호 KRS-AA-0047 REV. 가람 솔루션 00 DATE 2011-07-26 한빛전자 MODEL MR50001WF TYPE External Ant PAGE PAGE 4 KRS-A-021(Rev.00) (주) 가람 솔루션 - SET 거치 상태 구 분 WiFi 2400MHz 2440MHz 2485MHz 정재파비(V.S.W.R) 3.0이하 3.0이하 3.0이하 - 전기적 특성 VSWR 안테나 규격서 문서번호 KRS-AA-0047 REV. 가람 솔루션 00 DATE 2011-07-26 한빛전자 MODEL MR50001WF TYPE External Ant PAGE PAGE 5 KRS-A-021(Rev.00) (주) 가람 솔루션 2.1.2 복사 패턴 이 안테나의 복사 패턴은 H-Plane에서 무지향성 특성을 갖는다. 2.1.3 안테나 이득 안테나의 이득은 WiFi 대역의 STANDARD HORN 안테나를 이용하여 Calibration 한 후, E2-Plane에서 측정한 Peak Gain 값으로서 단위는[dBi]이며, 아래의 사양을 만족하여야 한다. - Set 거치 상태 주파수 (Frequency Range) WiFi 2400MHz 2440MHz 2485MHz 이득 (Peak GAIN) E2-Plane 기준 1.0dBi이상 0.0dBi이상 -0.5dBi이상 이득 (Average GAIN) H-Plane 기준 -6.5dBi이상 -7.0dBi이상 -6.0dBi이상 안테나 규격서 문서…

Text truncated - open the document above for the full version.

Korea EMC Laboratory Co., Ltd. 390 Bora-dong, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea (446-904) Tel : 82-31-286-5881 Fax : 82-31-286-2661 www.koreaemc.com Report Ref. No: KEL11-F07056 Page (2) / Total (37) KEL-D-QP-25-24/3 KEL Korea EMC Laboratory 0. REPORT REVISION HISTORY Date Revision Page No October 11, 2011 Issued All This report shall not be reproduced except in full, without the written approval of Korea EMC Laboratory Co., Ltd. This document may be altered or revised by Korea EMC Laboratory Co., Ltd. personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by Korea EMC Laboratory Co., Ltd. will constitute fraud and shall nullify the document. Korea EMC Laboratory Co., Ltd. 390 Bora-dong, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea (446-904) Tel : 82-31-286-5881 Fax : 82-31-286-2661 www.koreaemc.com Report Ref. No: KEL11-F07056 Page (3) / Total (37) KEL-D-QP-25-24/3 KEL Korea EMC Laboratory TABLE OF CONTENTS 0. REPORT REVISION HISTORY 2 1. TEST LABORATORY 5 1.1 General 5 1.2 Certificate of designated testing laboratory 5 2. DESCRIPTION OF THE EQUIPMENT UNDER TEST 6 2.1 Characteristic 6 2.2 Applied standard 6 2.3 Submitted documents 6 2.4 Channel chart 7 3. TEST CONDITIONS 8 3.1 Description of test configuration 8 3.2 List of peripherals 8 3.3 Uncertainty 8 3.4 Environment condition 8 4. SUMMARY OF TEST RESULTS 9 5. TEST AND RESULTS 10 5.1 AC Power conducted emission 10 5.1.1 Test procedures 10 5.1.2 Limits of AC power conducted emission 10 5.1.3 Test instruments 10 5.1.4 Test results 11-12 5.2 Out of band emission & Band edge 13 5.2.1 Test procedures 13 5.2.2 Limits of out of band emission 13 5.2.3 Test instruments 14 5.2.4 Test results 14-25 5.3 Minimum 6 dB bandwidth 26 5.3.1 Test procedures 26 5.3.2 Limit of minimum 6 dB bandwidth 26 5.3.3 Test instruments 26 5.3.4 Test results 26-30 5.4 Maximum peak out power 31 5.4.1 Test procedures 31 5.4.2 Limit of maximum peak out power 31 5.4.3 Test instruments 31 5.4.4 Test results 31 Korea EMC Laboratory Co., Ltd. 390 Bora-dong, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea (446-904) Tel : 82-31-286-5881 Fax : 82-31-286-2661 www.koreaemc.com Report Ref. No: KEL11-F07056 Page (4) / Total (37) KEL-D-QP-25-24/3 KEL Korea EMC Laboratory 5.5 Peak power spectral density 32 5.5.1 Test procedures 32 5.5.2 Limit of peak power spectral density 32 5.5.3 Test instruments 32 5.5.4 Test results 32-36 5.6 Antenna requirement 37 5.6.1 Regulation 37 5.6.2 Antenna connected construction 37 5.7 RF exposure 37 Korea EMC Laboratory Co., Ltd. 390 Bora-dong, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea (446-904) Tel : 82-31-286-5881 Fax : 82-31-286-2661 www.koreaemc.com Report Ref. No: KEL11-F07056 Page (5) / Total (37) KEL-D-QP-25-24/3 KEL Korea EMC Laboratory 1. Test Laboratory General Name of Test Laboratory Korea EMC Laboratory Co., Ltd. President Won-Hyang Oh Address 390 Bora-dong, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea (446-904) TEL +82-31-286-5881 FAX +82-31-286-2661 e-mail [email protected] Certificate of Designated Testing Laboratory Area and Category Regulation Registration & Certification No. Mark. Radio Research Agency EMI(Radiated & Conducted emission) EMS(Radiated Immunity) Safety Radio Communication Part Regulation of KCC No. 2011-12 (2011.02.18) KR0002 Korea Laboratory Accreditation Scheme (KOLAS) EMI(Radiated & Conducted emission) EMS(Radiated Immunity) Safety Road Vehicle component test(EMC) Military EMC(MIL-STD-461E) KS Q ISO/IEC 17025:2006 No. 154 FCC Part 15 & 18 EMI(Radiated & Conducted emission) ANSI 63.4:2003 90751 (KR0002) VCCI EMI(Radiated & Conducted emission) VCCI C-2314 R-2139 R-2140 UL Korea Ltd. Safety Star Alliance Program - European Conformity EMC & Safety 2004/108/EC 2006/95/EC - TUV SUD Certification after Recognition of Agent’s Testing EMC ISO/IEC 17025:2005 ROK1006C Korea EMC Laboratory Co., Ltd. 390 Bora-dong, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea (446-904) Tel : 82-31-286-5881 Fax : 82-31-286-2661 www.koreaemc.com Report Ref. No: KEL11-F07056 Page (6) / Total (37) KEL-D-QP-25-24/3 KEL Korea EMC Laboratory 2. DESCRIPTION OF THE EQUIPMENT UNDER TEST The product specification described herein was obtained from the product data sheet or user’s manual 2.1 Characteristics Product name WLAN UNIT Model no. MR50001WF.GMSEESU FCC ID MR50001WFUS Operation frequency 802.11 b/g : 2412 MHz – 2462 MHz RF power 802.11 b/g : 16.57 dBm(45.39 mW) Spread spectrum method 802.11 b/g : DSSS, OFDM Modulation type 802.11 b : CCK, DQPSK, DBPSK 802.11 g : 64QAM, 16QAM, QPSK, BPSK Data rate 802.11 b : 11.0 / 5.5 / 2.0 / 1.0 Mbps 802.11 g : 54.0 / 48.0 / 36.0 / 24.0 / 18.0 / 12.0 / 9.0 / 6.0 Mbps Number of channel 802.11 b/g : 11 Channel Antenna type / Max. gain 802.11 b/g : Dipole Antenna / 2.5 dBi Power source DC 5.0 V Size 115 mm X 105 mm X 50 mm Interface ports - Accessory - 2.2 Applied standard - FCC part 15, subpart C(15.247_DTS) - ANSI C63.4 Note : It has been verified to comply with requirements of FCC part 15, subpart B, Class B(DoC). The test report has been issued separately(KEL11-F07118) 2.3 Submitted documents - Block diagram - Schematic diagram - Antenna specification - Part list(B.O.M) - User manual Korea EMC Laboratory Co., Ltd. 390 Bora-dong, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea (446-904) Tel : 82-31-286-5881 Fax : 82-31-286-2661 www.koreaemc.com Report Ref. No: KEL11-F07056 Page (7) / Total (37) KEL-D-QP-25-24/3 KEL Korea EMC Laboratory 2.4 Channel chart 802.11 b/g(11 Channel) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 1 2412 2 2417 3 2422 4 2427 5 2432 6 2437 7 2442 8 2447 9 2452 10 2457 11 2462 ▪ Measurement Channel 802.11 b/g : Low(2412 MHz), Middle(2437 MHz), High(2462 MHz) ▪ Test rate : 802.11 b/g(11, 54 Mbps) Korea EMC Laboratory Co., Ltd. 390 Bora-dong, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea (446-904) Tel : 82-31-28…

Text truncated - open the document above for the full version.