BEJWCP300Wireless Charger

LG Electronics Wireless Charging Pad WCP-300 User Manual Rev0.1 All rights reserved. LG Electronics inc., 2013 Note: For optimal performance and to prevent any damage to, or misuse of the WCP-300, please read all the information carefully before using the WCP-300. Any modifications or changes to this manual due to typographical errors or inaccuracies of stated information shall only be made by LG Electronics Inc.. - Do not drop the Wireless charging pad from high places. - Do not modify, repair, or take the Wireless charging pad apart. - Do not clean with water alcohol or benzene. - Keep the Wireless charging pad away from humidity & dust. - Do not place heavy objects on the Wireless charging pad. Included in Package WCP-300 (Wireless Charger) Power Supply Warranty Card User Manual Description of parts FCC NOTICE TO USERS: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: BEJWCP300 - When disconnecting the power supply, always remove with the plug, do not pull the wire by itself. - Never handle the power plug with wet hands, as this could cause fire or electric shock. - Refer servicing to qualified personnel only. - Do not open the housing - Do not twist or pinch the power supply cord. If the plugs or power supply cords need to be replaced, ensure that they comply with the manufacturer’s recommendation. - Unplug the device during lighting storms and when unused for extended periods of time. When using an electrical device, especially when children are present, basic safety precautions should always be followed, including the following: DANGER to reduce the risk of electric shock - Always unplug the device from the electrical outlet before cleaning. - Do not reach for a device that has fallen into water. Unplug it immediately. - Do not place or store device where it can fall or be pulled into a tub or sink. - Do not place in or drop into water or other liquid. WARNING to reduce the risk of burns, fire, electric shock or injury to persons - Do not use with extension cord. - Children should be closely supervised to ensure that they do not play with the device. - Use this device only for its intended use as described in this manual. Do not use with unauthorized accessories of devices. - Never operate this device if it has a damaged cord, plug, cable or housing. If it is not working properly, if it has been dropped or damaged, return it to the LG Service Center for examination and repair. - Keep cord away from heated surfaces. - This device is designed for indoor use only. Do not use outdoors. - Only set on dry surfaces. Do not place on surface wet from water or cleaning solvents. Safety Instructions LED display - When the power supply is connected, the wireless charging pad (WCP-300) will turn on. The Charging Status LED Indicator will show a solid orange color light. - When a wireless charging enabled device is placed in the correct position, an activation Charging indicator will change from solid orange to flickering green. - When charging is completed, the charging indicator will show a solid green light. How to use Charging Charging Area Charging Status LED Indicator ITEM Description Input / Output DC 5V, 1800mA / DC 5V, 1000mA Charging time < 4 hours (Based on 1500mAh Battery) Operation temperature -10°C ~ 60°C Dimension Φ 69.8mm(Dia.) X 12.2mm(H) , 60g Function WCP-300 Status Charging status LED Operating Power supply disconnected Off Power supply connected Solid Orange Charging Charging Flickering Green Charging complete Solid Green Charging Stopped (W ired phone charger is attached at the same time) Solid Orange Error Charging Stopped (Charger or phone is in error condition) Solid Red

Date: August 24, 2012 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of CCS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jacop Cho Director On behalf of LG Electronics Mobilecomm U.S.A.,Inc REMARK: 1.This authorization letter will be sent along with your application when filing with the Certification Division. 2.Please follow the format and type it on company letterhead and send original to us. 3.Authorized signature must be in agreement with grantee code contact in FCC database.

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: BEJWCP-300 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Operation Descriptions Parts List PCB Layout Block Diagram Antenna Specification Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days of Grant Issue External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Jacop Cho Director On behalf of LG Electronics Jan 24, 2013

FCCID: BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page1 / 3 View 1 FCCID: BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page2 / 3 View 2 FCCID: BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page3 / 3 View 2

01 SYMREVISION DATEECO. NO.SIGNED ART 90GBLACK

FCCID:BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page1 / 3 View 1 FCCID:BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page2 / 3 View 2 FCCID:BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Page3 / 3 View 3

DEMC1301-00055 FCCID: BEJWCP300 DRTFCC1301-0058(5) TRF-RF-308(01)100709 Page2 / 7 Copyright ○ C 2013, Digital EMC Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1301-0058 Jan. 24, 2013 Initial issue DRTFCC1301-0058(1) Jan. 30, 2013 Updated FCCID DRTFCC1301-0058(2) Feb. 15, 2013 Updated results of test mode DRTFCC1301-0058(3) Feb. 26, 2013 Updated results of additional test DRTFCC1301-0058(4) Mar. 29, 2013 Changed results and update results of additional test DRTFCC1301-0058(5) Apr. 12, 2013 Described additional test condition DEMC1301-00055 FCCID: BEJWCP300 DRTFCC1301-0058(5) TRF-RF-308(01)100709 Page3 / 7 Copyright ○ C 2013, Digital EMC Co., Ltd. CONTENTS 1. Equipment information ............................................................................. 4 1.1 Equipment description ............................................................................ 4 1.2 Support equipment .................................................................................. 4 2. Information about test items .................................................................... 5 2.1 Test mode ............................................................................................... 5 2.2 Tested environment ................................................................................. 5 3. E and H field strength ............................................................................... 6 DEMC1301-00055 FCCID: BEJWCP300 DRTFCC1301-0058(5) TRF-RF-308(01)100709 Page4 / 7 Copyright ○ C 2013, Digital EMC Co., Ltd. 1. Equipment information 1.1 Equipment description FCC Equipment Class Part 15 Low Power Transmitter Below 1705 kHz (DCD) Equipment type Wireless Charging Equipment model name WCP-300 Equipment add model name N/A Equipment serial no. Identical prototype Frequency range 110 ~ 205kHz Charging power range 0 ~5 W Protocol Note 1 WPC protocol(A1 type) Power AC 120V 60Hz Antenna type Internal Loop Antenna(Circular coil) Note 1: This device can charge only one client device on the specific location at a time. So this device is a A1 device of the WPC protocol 1.2 Support equipment Equipment Model No. Serial No. Manufacturer Note AC Adapter MCS-04WT TA2Y0000045TEN PAO - Client Device bq51013EVM-725 HPA725 Rev. ATI Instruments - Mobile Phone LG-E960 N/A LG FCC ID : ZNFE960 Note: The support equipments were supported by manufacturer. DEMC1301-00055 FCCID: BEJWCP300 DRTFCC1301-0058(5) TRF-RF-308(01)100709 Page5 / 7 Copyright ○ C 2013, Digital EMC Co., Ltd. 2. Information about test items 2.1Test mode This device has been tested in the worst-case mode of charging mode as below conditions: Test Mode Support Equipment Charging Current Condition TM1 Client Device (M/N: bq51013EVM-725) 300mA TM2 Client Device (M/N: bq51013EVM-725) 600mA TM3 Client Device (M/N: bq51013EVM-725) 1000mA TM4 Client Device (M/N: bq51013EVM-725) 100mA TM5 Mobile Phone (M/N: LG-E960) < 1% battery status & Charging & All of the TXs OFF condition using Airplane Mode of the Mobile Phone TM6 Mobile Phone (M/N: LG-E960) 50% battery status& Charging & All of the TXs OFF condition using Airplane Mode of the Mobile Phone TM7 Mobile Phone (M/N: LG-E960) < 1% battery status& Charging & GPRS Class12 4TX condition using Call-Box Note 1: The Charging is not operation when 100% fully charged status. 2.2Tested environment Temperature : 21 ~ 23°C Relative humidity content : 36 ~ 52 % R.H. Details of power supply : AC 120V 60Hz DEMC1301-00055 FCCID: BEJWCP300 DRTFCC1301-0058(5) TRF-RF-308(01)100709 Page6 / 7 Copyright ○ C 2013, Digital EMC Co., Ltd. 3. E and H field strength For RF exposure purposes, the E and H field st rengths are measured separately with E and H p robes and mete rs at different locations surrounding the test setup. ▪Test setup diagram Note: Z-axis is not tested since top and bottom side of the desktop charger shall be located far from human body in actual usage condition. ▪ Measurement distance information Measurement distance = 10cm (From EUT edge to the center of probe) ▪Measurement procedure These testing were performed at test configuration as above diagram. EUT was placed on a turntable, and the measurement probe was placed at a measurement distance of 10cm from the EUT, the turn table was rotated 360 degrees to capture the highest signal.Please refer to setup photo for more details. ▪Test equipment list Type Manufacturer Model Cal.Date (yy/mm/dd) Next. Cal.Date (yy/mm/dd) S/N Exposure level meter NARDA ELT-400 12/01/30 13/02/06 14/02/06 J-0015 Magnetic Field Meter Holaday Industries HI-3627 11/02/14 13/02/18 15/02/18 00023776 Call-Box Agilent E5515C 12/03/05 13/02/28 14/02/28 GB43461134 DEMC1301-00055 FCCID: BEJWCP300 DRTFCC1301-0058(5) TRF-RF-308(01)100709 Page7 / 7 Copyright ○ C 2013, Digital EMC Co., Ltd. ▪Measurement data: 1. Test configuration 1 Test Mode Freq. [MHz] Result Limit E-field(V/m) H-field(A/m) E-field(V/m) H-field(A/m) TM1 0.148 2.32 0.40 614 1.63 TM2 0.147 2.24 0.39 614 1.63 TM3 0.145 2.32 0.37 614 1.63 TM4 0.159 2.08 0.37 614 1.63 TM5 0.124 2.42 0.17 614 1.63 TM6 0.131 1.95 0.08 614 1.63 TM7 0.128 6.77 0.18 614 1.63 ▪Limit The criteria listed in table 1 shall be used to evaluate the enviromental impact of huuman exposure to radio-f requency radiatio as specified FCC part 1.1037 (b), except in the ca se of portable devi ces which shall be evaluated accordi ng to the provisions of FCC part 2.1093.

DEMC1301-00055 FCCID: BEJWCP300 DRTFCC1301-0058(5) TRF-RF-308(01)100709 Page2 / 7 Copyright ○ C 2013, Digital EMC Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1301-0058 Jan. 24, 2013 Initial issue DRTFCC1301-0058(1) Jan. 30, 2013 Updated FCCID DRTFCC1301-0058(2) Feb. 15, 2013 Updated results of test mode DRTFCC1301-0058(3) Feb. 26, 2013 Updated results of additional test DRTFCC1301-0058(4) Mar. 29, 2013 Changed results and update results of additional test DRTFCC1301-0058(5) Apr. 12, 2013 Described additional test condition DEMC1301-00055 FCCID: BEJWCP300 DRTFCC1301-0058(5) TRF-RF-308(01)100709 Page3 / 7 Copyright ○ C 2013, Digital EMC Co., Ltd. CONTENTS 1. Equipment information ............................................................................. 4 1.1 Equipment description ............................................................................ 4 1.2 Support equipment .................................................................................. 4 2. Information about test items .................................................................... 5 2.1 Test mode ............................................................................................... 5 2.2 Tested environment ................................................................................. 5 3. E and H field strength ............................................................................... 6 DEMC1301-00055 FCCID: BEJWCP300 DRTFCC1301-0058(5) TRF-RF-308(01)100709 Page4 / 7 Copyright ○ C 2013, Digital EMC Co., Ltd. 1. Equipment information 1.1 Equipment description FCC Equipment Class Part 15 Low Power Transmitter Below 1705 kHz (DCD) Equipment type Wireless Charging Equipment model name WCP-300 Equipment add model name N/A Equipment serial no. Identical prototype Frequency range 110 ~ 205kHz Charging power range 0 ~5 W Protocol Note 1 WPC protocol(A1 type) Power AC 120V 60Hz Antenna type Internal Loop Antenna(Circular coil) Note 1: This device can charge only one client device on the specific location at a time. So this device is a A1 device of the WPC protocol 1.2 Support equipment Equipment Model No. Serial No. Manufacturer Note AC Adapter MCS-04WT TA2Y0000045TEN PAO - Client Device bq51013EVM-725 HPA725 Rev. ATI Instruments - Mobile Phone LG-E960 N/A LG FCC ID : ZNFE960 Note: The support equipments were supported by manufacturer. DEMC1301-00055 FCCID: BEJWCP300 DRTFCC1301-0058(5) TRF-RF-308(01)100709 Page5 / 7 Copyright ○ C 2013, Digital EMC Co., Ltd. 2. Information about test items 2.1Test mode This device has been tested in the worst-case mode of charging mode as below conditions: Test Mode Support Equipment Charging Current Condition TM1 Client Device (M/N: bq51013EVM-725) 300mA TM2 Client Device (M/N: bq51013EVM-725) 600mA TM3 Client Device (M/N: bq51013EVM-725) 1000mA TM4 Client Device (M/N: bq51013EVM-725) 100mA TM5 Mobile Phone (M/N: LG-E960) < 1% battery status & Charging & All of the TXs OFF condition using Airplane Mode of the Mobile Phone TM6 Mobile Phone (M/N: LG-E960) 50% battery status& Charging & All of the TXs OFF condition using Airplane Mode of the Mobile Phone TM7 Mobile Phone (M/N: LG-E960) < 1% battery status& Charging & GPRS Class12 4TX condition using Call-Box Note 1: The Charging is not operation when 100% fully charged status. 2.2Tested environment Temperature : 21 ~ 23°C Relative humidity content : 36 ~ 52 % R.H. Details of power supply : AC 120V 60Hz DEMC1301-00055 FCCID: BEJWCP300 DRTFCC1301-0058(5) TRF-RF-308(01)100709 Page6 / 7 Copyright ○ C 2013, Digital EMC Co., Ltd. 3. E and H field strength For RF exposure purposes, the E and H field st rengths are measured separately with E and H p robes and mete rs at different locations surrounding the test setup. ▪Test setup diagram Note: Z-axis is not tested since top and bottom side of the desktop charger shall be located far from human body in actual usage condition. ▪ Measurement distance information Measurement distance = 10cm (From EUT edge to the center of probe) ▪Measurement procedure These testing were performed at test configuration as above diagram. EUT was placed on a turntable, and the measurement probe was placed at a measurement distance of 10cm from the EUT, the turn table was rotated 360 degrees to capture the highest signal.Please refer to setup photo for more details. ▪Test equipment list Type Manufacturer Model Cal.Date (yy/mm/dd) Next. Cal.Date (yy/mm/dd) S/N Exposure level meter NARDA ELT-400 12/01/30 13/02/06 14/02/06 J-0015 Magnetic Field Meter Holaday Industries HI-3627 11/02/14 13/02/18 15/02/18 00023776 Call-Box Agilent E5515C 12/03/05 13/02/28 14/02/28 GB43461134 DEMC1301-00055 FCCID: BEJWCP300 DRTFCC1301-0058(5) TRF-RF-308(01)100709 Page7 / 7 Copyright ○ C 2013, Digital EMC Co., Ltd. ▪Measurement data: 1. Test configuration 1 Test Mode Freq. [MHz] Result Limit E-field(V/m) H-field(A/m) E-field(V/m) H-field(A/m) TM1 0.148 2.32 0.40 614 1.63 TM2 0.147 2.24 0.39 614 1.63 TM3 0.145 2.32 0.37 614 1.63 TM4 0.159 2.08 0.37 614 1.63 TM5 0.124 2.42 0.17 614 1.63 TM6 0.131 1.95 0.08 614 1.63 TM7 0.128 6.77 0.18 614 1.63 ▪Limit The criteria listed in table 1 shall be used to evaluate the enviromental impact of huuman exposure to radio-f requency radiatio as specified FCC part 1.1037 (b), except in the ca se of portable devi ces which shall be evaluated accordi ng to the provisions of FCC part 2.1093.

DEMC1301-00055 DRTFCC1301-0057(1) TRF-RF-204(01)110221 Page2 / 24 Copyright ○ C 2013, Digital EMC Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1301-0057 Jan. 24, 2013 Final version for approval DRTFCC1301-0057(1) Feb. 15, 2013 Update results of test mode DEMC1301-00055 DRTFCC1301-0057(1) TRF-RF-204(01)110221 Page3 / 24 Copyright ○ C 2013, Digital EMC Co., Ltd. CONTENTS 1.Equipment information ............................................................... 4 1.1 Equipment description ............................................................. 4 1.2 Support equipments ................................................................ 4 2. Information about test items ..................................................... 5 2.1 Test mode ................................................................................ 5 2.2 Tested environment ................................................................. 5 2.3 EMI Suppression Device(s)/Modifications ............................... 5 3. Test Report ................................................................................. 6 3.1 Summary of tests .................................................................... 6 3.2 Transmitter requirements ........................................................ 7 3.2.1 20dB Bandwidth & Occupied Bandwidth Measurement ...... 7 3.2.2 Radiated Emissions ............................................................ 8 3.2.3 AC Line Conducted Emissions .......................................... 10 APPENDIX I................................................................................... 23 DEMC1301-00055 DRTFCC1301-0057(1) TRF-RF-204(01)110221 Page4 / 24 Copyright ○ C 2013, Digital EMC Co., Ltd. 1.Equipment information 1.1 Equipment description FCC Equipment Class Part 15 Low Power Transmitter Below 1705 kHz (DCD) Equipment type Wireless Charger Equipment model name WCP-300 Equipment add model name N/A Equipment serial no. Identical prototype Frequency band 110 ~ 205kHz Power AC 120V 60Hz Antenna type Internal Loop Antenna(Circular coil) 1.2 Support equipments Equipment Model No. Serial No. Manufacturer Note AC Adapter MCS-04WT TA2Y0000045TEN PAO - Client Device bq51013EVM-725 HPA725 Rev. ATI Instruments - Mobile Phone LG-E960 N/A LG FCC ID : ZNFE960 Note: Thesupport equipments were supported by manufacturer. DEMC1301-00055 DRTFCC1301-0057(1) TRF-RF-204(01)110221 Page5 / 24 Copyright ○ C 2013, Digital EMC Co., Ltd. 2. Information about test items 2.1 Test mode This device has been tested in the worst-case mode of charging mode as below conditions: Test Mode Support Equipment Charging Current Condition TM1 Client Device(M/N: bq51013EVM-725) 300mA TM2 Client Device(M/N: bq51013EVM-725) 600mA TM3 Client Device(M/N: bq51013EVM-725) 1000mA TM4 Client Device(M/N: bq51013EVM-725) 100mA TM5 Mobile Phone(M/N: LG-E960) < 1% battery status TM6 Mobile Phone(M/N: LG-E960) 50% battery status Note 1: The Charging is not operation when 100% fully charged status. 2.2 Tested environment Temperature : 21 ~ 24 o C Relative humidity content :39 ~ 47 % R.H. Details of power supply :AC 120V 60Hz 2.3 EMI Suppression Device(s)/Modifications EMI suppression device(s) added and/or modifications made during testing → None DEMC1301-00055 DRTFCC1301-0057(1) TRF-RF-204(01)110221 Page6 / 24 Copyright ○ C 2013, Digital EMC Co., Ltd. 3. Test Report 3.1 Summary of tests FCC Part Section(s) Parameter Limit Test Condition Status Note 1 Test Items 2.1049 Occupied Bandwidth N/A Radiated C 15.209 Radiated Emission <FCC 15.209 limits C 15.207 AC Conducted Emissions < FCC 15.207 limits AC Line Conducted C Note 1: C=Comply NC=Not Comply NT=Not Tested NA=Not Applicable The sample was tested according to the following specification: ANSI C-63.4 DEMC1301-00055 DRTFCC1301-0057(1) TRF-RF-204(01)110221 Page7 / 24 Copyright ○ C 2013, Digital EMC Co., Ltd. 3.2 Transmitter requirements 3.2.1 20dB Bandwidth & Occupied Bandwidth Measurement - Procedure: The 20dB bandwidth and occupied bandwidth(99% emission bandwidth)are measured with a spectrum analyzer connected via a receiving antenna placed near the EUT while the EUT is operating. - Measurement Data: Test Mode 3 DEMC1301-00055 DRTFCC1301-0057(1) TRF-RF-204(01)110221 Page8 / 24 Copyright ○ C 2013, Digital EMC Co., Ltd. 3.2.2 Radiated Emissions - Limit: FCC Part 15.209(a)& RSS-GEN, section 7.2.2 and 7.2.5 Frequency [MHz] Field Strength [uV/m] Measurement Distance [Meters] 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 ** Except as provided in 15.209(g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54-72 MHz, 76-88MHz, 174-216MHz or 470-806MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g. 15.231 and 15.241. - Procedure:ANSI C63.4 1. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter anechoic chamber test site. The table was rotated 360 degrees to determine the position of the highest radiation. 2. During performing radiated emission below 1 ㎓, the EUT was set 3 meters away from the interference receiving antenna, which was mounted on the top of a variable-height antenna tower. During performing radiated emission above 1 ㎓, the EUT was set 3 meter away from the interference-receiving antenna. 3. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the table was turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function a…

Text truncated - open the document above for the full version.

FCC ID: BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Support equipment: Client Device (M/N: bq51013EVM-725) FCC ID: BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Support equipment: Mobile Phone (M/N: LG-E960) FCC ID: BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Test Setup Photo for Radiated Emissions FCC ID: BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Test Setup Photo for Conducted Emissions FCC ID: BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Test Setup Photo for RF Exposure(Test Configuration 1) FCC ID: BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Test Setup Photo for RF Exposure(Test Configuration 2) FCC ID: BEJWCP300 Copyright Ⓒ 2013, Digital EMC Co., Ltd. Test Setup Photo for RF Exposure(Measurement distance)