BJM-TIH-F1500Induction Cooker

INDUCTION COOKER TIH-F1500SU Instruction Manual 1 Control Panel TIH-F1500HU 1 Part Identification 2 Model No. TIH-F1500HU Voltage / Frequency 120V,60Hz Rated Wattage 1500W  Do not allow the main cable to touch hot surface.  Do not pull the cable across sharp edges.  Do not use the cable to carry the appliance.  Always unplug the appliance after use or if the set is faulty.  Keep children away from the appliance.  Ensure that the main power voltage corresponds to the voltage of the appliance.  To protect against fire, electric shock and personal injury, do not immerse cord, plug or appliance in water or other liquids.  Never leave the appliance unattended when it is in operation.  Do not operate this appliance with a damaged cord / plug or has been damaged in any manner.  Do not use pans with inferior materials.  Always place appliance on a flat and sturdy surface.  When moving appliance, do not touch hot surfaces, or avoid spilling hot liquids over it.  The appliance must not be placed on, or near any hot surfaces.  Do not put the appliance near a washbasin.  Do not clean the appliance under a running tap water. GENERAL SAFETY PRECAUTIONS SPECIFICATIONS 3  If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn, some cleaners can produce noxious fumes if applied to a hot surface. Operation Test  Use a pan that is suitable for induction cooking; having a bottom diameter of at least 12 cm. Put some water in the pan and place it at the center of the heating zone.  Press “On/Off” func tion. The buzzer will so und once and all the LED lights are on for one second and turn off. The “On/Off” light will turn on.  Press the “temp level” function for a minute.  The water will be heated up.  Take the pan away from the heating zone.  The buzzer w ill sound once.  Place the pan back on the heating zone. The heating process will continue.  Turn off the induction cooker by pressing “On/Off” function. The heating process will stop and the indicator light will blink. If the induction cooker remains off after pressing the “On/Off” function, check the following:  Is the induction cooker connected to the power outlet?  Has the induction cooker been switched on?  Is a suitable pan being used for induction cooker (12-26 cm)? Is it made of suitable material?  Is the pan being placed at the center of the heating zone? Cooking Process The illuminated indicator light means that the energy is being transferred to the pan. The power rating can be changed by pressing the touch control key. The inductive power transmission depends on the power rating. OPERATING INSTRUCTIONS 4 When the heating level is changed by pressing the control key, the food is immediately exposed to different temperature. Do NOT PUT EMPTY PANS on the heating zone. First, put oil or liquid into the pan and then start cooking by pressing the control key. The heating level can be adjusted to different cooking mode. The pan should always remain in the center of the heating zone during cooking; otherwise the bottom of the pan will be heated up unequally and the food in the pan may be burnt. While heating up oil, constant ly check the pan to prevent overheating and burning. Operation (1) press any function to acti ve the cooker, the cooker will auto detect the if cookware is proper within 30seconds. （ 2 ） if no cookware or cookware material is not proper, the buzzer will sound per 0.2S and the first LED display level light will flash the cooker will auto switch off and change to stand by mode if no cookware or cookware material is not proper after 30seconds, （ 3 ） if put proper cookware within 30seconds, the cooker will start to heating. （ 4 ） warm level, temperature and turbo function can be active at any working mode. w arm function: Press warm level ” button to active warm function, the warm level indicator light on and the correspond warm level "140F" LED light will on, the default warm level will be set at 140F, 5 total 3 warm level can be select during this function ,you can press + or - key to adjust warm level at 140F,158F and 176F. Turbo function Press "turbo ” button to active turbo function,the cooker will heating with max power for 3 minutue and then will turn to warm level function automatic. temperature level function: Press temperature level ” button to active temperature function, the temperaure leve l indicator light on and the correspond temperature level LED light will on, the default warm level will be set at 374F, total 5 warm level can be select during this function ,you can press + or - key to adjust warm level at 320F,338F,356 374F and 392F. Protection: If there is no cooking utensil on the cooking zone or if it is not suitable for induction cooking, the fi rst LED level light will flash”. Temperature protection: If the insulated gate bipolar transistor’s (IGBT) temperature is too high, t he cooker will switch itself OFF. The buzzer will sound and the second LED level light will flash. Lower / higher voltage protection: If the local voltage is lower than 95 V, the fourth led level light will flash”. When it is more than 140 V, the third LED level light will flash Sensor detector: If the main se nsor detects any disconnection or short circuit, the fifth LED led level light will flash. 6  To avoid injuries (burning), do not touch the heating zone after cooking.  To avoid overheating of pans, don’t heat up pans unattended and empty.  Switch off the cooker at once, if you take the pan away for a while. This will avoid having the heating process continue automatically when a pan is placed back on the heating area. If any person starts to use the co oker, he/she will have to start the heating process by pressing the “On/Off” function.  Do not insert any piece of paper, cardboard, cloth, etc. between the pan and the heating zone, as this might initiate a fire.  Metallic objects such as kniv es, forks, spoons and lids get heated up very quickly. They should…

Text truncated - open the document above for the full version.

Date:2015-5-25 Subject: authorization for adding family models To whom it May concern, Statement We would like to confirm the models TIH-F1500SU and TIH-F1500HU, Motherboard and Circuit principle of above product are the same, only the control panel is different. Yours sincerely,

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Photographs – Constructional Details EUT – Appearance View Model: TIH-F1500SU Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Model: TIH-F1500HU Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn

FCC Label Sample for model: TIH-F1500SU, TIH-F1500HU Tatung Company FCC ID: BJM-TIH-F1500 AC 120V, 60Hz, 1500W

FCC Label Sample for model: TIH-F1500SU, TIH-F1500HU Tatung Company FCC ID: BJM-TIH-F1500 AC 120V, 60Hz, 1500W

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn EUT – Open View Model: TIH-F1500SU Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Model: TIH-F1500HU Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn ======End of Report======

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Page: 1 of 34 TEST REPORT Reference No. .................... : WTZ15S0425596E FCC ID ................................ : BJM-TIH-F1500 Applicant ............................ : Tatung Company Address .............................. : 22 Chungshan N Road Sec 3,Taipei 10451, Taiwan Manufacturer .................... : The same as above Address .............................. : The same as above Product Name .................... : Induction Cooker Model No. ........................... : TIH-F1500SU, TIH-F1500HU Standards .......................... : FCC PART18 Date of Receipt sample .... : Apr. 24, 2015 Date of Test ....................... : Apr. 24 – May. 16, 2015 Date of Issue ...................... : May. 21, 2015 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company.The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Services (Shenzhen) Co., Ltd. Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen, Guangdong, China Tel :+86-755-83551033 Fax:+86-755-83552400 Compiled by: Approved by: Zero Zhou / Project Engineer Philo Zhong / Manager Reference No.: WTZ15S0425596E Page 2 of 34 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 1 Test Summary Test Item Test Requirement Class Test Method Test Result AC Line Conducted Emissions (9kHz to 30MHz) FCC PART 18 18.307(c) FCC OST/MP- 5:1986 Pass Field Strength (9kHz to 30MHz) FCC PART 18 18.305(c) FCC OST/MP- 5:1986 Pass Remark: Pass Test item meets the requirement Fail Test item does not meet the requirement N/A Test case does not apply to the test object Reference No.: WTZ15S0425596E Page 3 of 34 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 2 Contents Page COVER PAGE ················································································································· 1 1 TEST SUMMARY .................................................................................................................................................. 2 2 CONTENTS ............................................................................................................................................................ 3 3 GENERAL INFORMATION .................................................................................................................................. 4 3.1 GENERAL DESCRIPTION OF E.U.T. ............................................................................................................ 4 3.2 DETAILS OF E.U.T. ..................................................................................................................................... 4 3.3 STANDARDS APPLICABLE FOR TESTING .................................................................................................... 4 3.4 TEST FACILITY ............................................................................................................................................ 4 3.5 SUBCONTRACTED ....................................................................................................................................... 4 3.6 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 5 4 EQUIPMENT USED DURING TEST .................................................................................................................. 6 4.1 EQUIPMENT LIST ......................................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ............................................................................................................. 6 4.3 MEASUREMENT UNCERTAINTY ................................................................................................................... 6 5 EMISSION TEST RESULTS ................................................................................................................................ 7 5.1 CONDUCTION EMISSION ............................................................................................................................. 7 5.2 FIELD STRENGTH ...................................................................................................................................... 13 6 PHOTOGRAPHS – TEST SETUP .................................................................................................................... 23 6.1 PHOTOGRAPH –CONDUCTION EMISSION TEST SETUP ........................................................................... 23 6.2 PHOTOGRAPH –FIELD STRENGTH TEST SETUP ...................................................................................... 23 7 PHOTOGRAPHS – CONSTRUCTIONAL DETAILS ..................................................................................... 24 7.1 EUT – APPEARANCE VIEW ...................................................................................................................... 24 7.2 EUT – OPEN VIEW ................................................................................................................................... 30 Reference No.: WTZ15S0425596E Page 4 of 34 Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn 3 General Information 3.1 General Description of E.U.T. Product Name ......................: Induction Cooker Model No. ............................ .: TIH-F1500SU, TIH-F1500HU Product Type ....................... .: Consumer equipment Operating Frequency .......... .: Below 90KHz Model Difference ................. .: Motherboard and Circuit principle of above product are the same, only the control panel is different. Remark ................................ . TIH-F1500SU and TIH…

Text truncated - open the document above for the full version.

Waltek Services (Shenzhen) Co.,Ltd. http://www.waltek.com.cn Photographs – Test Setup Photograph –Conduction Emission Test Setup Photograph –Field Strength Test Setup