BV8BBPBM113Wireless Licensed Module

Product Manual 14221-6200-6030 Rev. A, Apr/13 Harris ® LTE PBM-113 Band 13/14 PCI Express Mini Module 14221-6200-6030, Rev. A 2 MANUAL REVISION HISTORY REV DATE REASON FOR CHANGE - Feb/13 Initial release. A Apr/13 Updated graphics and other minor corrections. Harris Corporation, Public Safety and Professional Communications (PSPC) Business continually evaluates its technical publications for completeness, technical accuracy, and organization. You can assist in this process by submitting your comments and suggestions to the following: Harris Corporation fax your comments to: 1-434-455-6851 PSPC Business or Technical Publications e-mail us at: PSPC _ TechPubs @ harris.com 221 Jefferson Ridge Parkway Lynchburg, VA 24501 CREDITS Harris and assuredcommunications are registered trademarks of Harris Corporation. All other brand and product names are trademarks, registered trademarks, or service marks of their respective owners. NOTICE! The material contained herein is subject to U.S. export approval. No export or re-export is permitted without written approval from the U.S. Government. Rated: EAR99; in accordance with U.S. Dept. of Commerce regulations 15CFR774, Export Administration Regulations. Information and descriptions contained herein are the property of Harris Corporation. Such information and descriptions may not be copied or reproduced by any means, or disseminated or distributed without the express prior written permission of Harris Corporation, PSPC Business, 221 Jefferson Ridge Parkway, Lynchburg, VA 24501. Repairs to this equipment should be made only by an authorized service technician or facility designated by the supplier. Any repairs, alterations or substitutions of recommended parts made by the user to this equipment not approved by the manufacturer could void the user's authority to operate the equipment in addition to the manufacturer's warranty. This product conforms to the European Union WEEE Directive 2002/96/EC. Do not dispose of this product in a public landfill. Take it to a recycling center at the end of its life. This manual is published by Harris Corporation without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Harris Corporation at any time and without notice. Such changes will be incorporated into new editions of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose, without the express written permission of Harris Corporation. Copyright © 2013 Harris Corporation. All rights reserved. 14221-6200-6030, Rev. A 3 TABLE OF CONTENTS Section Page 1 INTRODUCTION .......................................................................................................................... 4 1.1 D ESCRIPTION ......................................................................................................................... 4 1.2 S COPE .................................................................................................................................... 4 2 REGULATORY AND SAFETY INFORMATION .................................................................... 5 2.1 REGULATORY APPROVALS ............................................................................................ 5 2.1.1 Transmitter ............................................................................................................... 5 2.1.2 Receiver .................................................................................................................... 5 2.1.3 FCC Compliance ...................................................................................................... 5 2.1.4 Labeling .................................................................................................................... 6 2.2 RF ENERGY EXPOSURE INFORMATION ....................................................................... 6 2.2.1 Maximum Permissible Exposure Limits .................................................................. 6 2.2.2 MPE Calculation for Mobile Device Installation ..................................................... 7 2.2.3 Maximum Allowed Antenna Gain ........................................................................... 7 3 INSTALLATION GUIDELINES ................................................................................................. 8 3.1 I NTRODUCTION ...................................................................................................................... 8 3.2 M OBILE HOST ........................................................................................................................ 8 3.3 P ORTABLE HOST .................................................................................................................... 8 3.4 C OLLOCATED TRANSMITTERS ............................................................................................... 8 4 SPECIFICATIONS ........................................................................................................................ 9 4.1 GENERAL SPECIFICATIONS ............................................................................................ 9 4.2 TRANSMITTER SPECIFICATIONS ................................................................................... 9 4.3 RECEIVER SPECIFICATIONS ........................................................................................... 9 5 CUSTOMER SERVICE .............................................................................................................. 10 5.1 C USTOMER CARE ................................................................................................................. 10 5.2 TECHNICAL ASSISTANCE ...................................................................................................... 10 FIGURES Figure 1-1: PCI Expre…

Text truncated - open the document above for the full version.

HARRIS CORPORATION 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com PCTEST TCB/CB Division of PCTEST Engineering Lab., Inc. 6660-B Dobbin Road Columbia, MD 21045 March 28, 2013 Subject: Agent Authority The following organization is granted authority to file documentation for Harris equipment with FCC ID: BV8BBPBM113, as it applies to an original Grant. PCTEST Engineering Laboratory Inc. Harris certifies that it is not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C.862. Further, no party to the application, as defined in 47 CFR 1.2002(b), is subject to denial of federal benefits, that includes FCC benefits. Sincerely, Daryl Popowitch Regulatory Manager

assuredcommunications™ HARRIS CORPORATION RF Communications Division 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com PCTEST TCB/CB Division of PCTEST Engineering Lab., Inc. 6660-B Dobbin Road Columbia, MD 21045 March 28, 2013 Attestation Part 90.203(p) compliance Harris attests that the user device submitted for certification in this application, the PBM-113 module, provides support for 3GPP Band Class 14 frequencies and 3GPP Standard E-UTRA release 8 with associated interfaces in order to support service and network capabilities that are documented in the Commission’s Waiver Order, released on May 12, 2010, Interoperability Order, released on December 10, 2010, and 3rd Report and Order, released on January 26, 2011 and all future requirements. Daryl Popowitch Regulatory Manager

HARRIS CORPORATION 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com March 28, 2013 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 RE: Request of Confidentiality for FCC ID: BV8BBPBM113 To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Harris Corporation hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby requesting Short-Term Confidentiality for 180 days after Grant issue as outlined in Public Notice DA 04-1705. This provision will give Harris Corporation temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Descriptions 3 Parts Lists and Tune-Up Procedure 4 Schematics SHORT-TERM CONFIDENTIAL 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 User’s Manual HARRIS CORPORATION 221 Jefferson Ridge Parkway Lynchburg, VA 24501 www.harris.com The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Daryl Popowitch Regulatory Manager

FCC ID: BV8BBPBM113 MAXIMUM PERMISSIBLE EXPOSURE (MPE) DATA REPORT Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 1 of 7 0Y1303040411.BV8 March 5-6, 2013 Wireless Module © 2013 PCTEST Engineering Laboratory, Inc. REV 3.2MPE 7/27/2012 Applicant Name: Date of Testing: Harris Corporation March 5-6, 2013 150 Apollo Drive Test Site/Location: Chelmsford, MA 01824 PCTEST Lab, Columbia, MD, USA USA Test Report Serial No.: 0Y1303040411.BV8 FCC ID: BV8BBPBM113 APPLICANT: Harris Corporation EUT Type: Wireless Module FCC Rule Part(s): FCC Part 1 (§1.1310) and Part 2 (§2.1091) FCC Classification: Licensed Non-Broadcast Transmitter (TNB) Test Procedure: OET Bulletin 65 The device bearing the FCC Identifier specified above has been shown to comply with the applicable technical standards as indicated in the measurement report and has been tested in accordance with the measurement procedures specified in FCC OET Bulletin 65 (See Test Report). These measurements were performed with no deviation from the standards. Test results reported herein relate only to the item(s) tested. I authorize and attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST ENGINEERING LABORATORY, INC. 6660-B Dobbin Road, Columbia, MD 21045 USA Tel. 410.290.6652 / Fax 410.290.6554 http://www.pctestlab.com RF EXPOSURE EVALUATION Maximum Permissible Exposure (MPE) FCC ID: BV8BBPBM113 MAXIMUM PERMISSIBLE EXPOSURE (MPE) DATA REPORT Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 2 of 7 0Y1303040411.BV8 March 5-6, 2013 Wireless Module © 2013 PCTEST Engineering Laboratory, Inc. REV 3.2MPE 7/27/2012 TABLE OF CONTENTS 1.0 RF EXPOSURE EVALUATION – MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................... 3 1.1 INTRODUCTION ................................................................................................................................... 3 1.2 EUT DESCRIPTION .............................................................................................................................. 3 1.3 MPE REQUIREMENTS OVERVIEW ..................................................................................................... 4 1.4 PROCEDURE ........................................................................................................................................ 5 1.5 SUMMARY OF RESULTS ..................................................................................................................... 6 2.0 CONCLUSION .................................................................................................................................. 7 FCC ID: BV8BBPBM113 MAXIMUM PERMISSIBLE EXPOSURE (MPE) DATA REPORT Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 3 of 7 0Y1303040411.BV8 March 5-6, 2013 Wireless Module © 2013 PCTEST Engineering Laboratory, Inc. REV 3.2MPE 7/27/2012 1.0 RF EXPOSURE EVALUATION – MAXIMUM PERMISSIBLE EXPOSURE (MPE) 1.1 Introduction This document is prepared on behalf of Harris Corporation to show compliance with the RF Exposure requirements as required in §1.1310 of the FCC Rules and Regulations and RSS-102 of Industry Canada. The limit for Maximum Permissible Exposure (MPE), specified in FCC §1.1310, is listed in Table 1-1. According to FCC §1.1310 and RSS-102: the criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b). Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (Minutes) (A) Limits For Occupational / Control Exposures (f = frequency) 30-300 61.4 0.163 1.0 6 300-1500 ... ... f/300 6 1500-100,000 ... ... 5.0 6 (B) Limits For General Population / Uncontrolled Exposure (f = frequency) 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 Table 1-1. Limits for Maximum Permissible Exposure (MPE) 1.2 EUT Description The Harris Model: PBM-113 is a Wireless Module containing LTE. For this MPE evaluation, the device is set to transmit from the antenna of each transmitter and the RF exposure of each transmitter is evaluated individually. EUT: Model: PBM-113 Grantee: Harris Corporation FCC ID: BV8BBPBM113 FCC ID: BV8BBPBM113 MAXIMUM PERMISSIBLE EXPOSURE (MPE) DATA REPORT Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 4 of 7 0Y1303040411.BV8 March 5-6, 2013 Wireless Module © 2013 PCTEST Engineering Laboratory, Inc. REV 3.2MPE 7/27/2012 1.3 MPE Requirements Overview Three different categories of transmitters are defined by the FCC in OET Bulletin 65. These categories are fixed installation, mobile, and portable and are defined as follows: o Fixed Installations: fixed location means that the device, including its antenna, is physically secured at a permanent location and is not able to be easily moved to another location. Additionally, distance to humans from the antenna is maintained to at least 2 meters. o Mobile Devices: a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to be generally used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structures and the body of the user or nearby persons. Transmitters designed to be used by consumers or workers that can be easily re-located, such as a wireless modem operating in a laptop computer, are considered mobile devices if they meet the 20 centimeter separation requirement. The FCC rules for evaluating mobile devices for RF compliance are found in 47 CFR §2.1091. o Portable Devices: a portable device is defined as a transmitting device designed to be used so …

Text truncated - open the document above for the full version.

FCC ID: BV8BBPBM113 FCC Pt. 90 LTE MEASUREMENT REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 1 of 25 0Y1303040410.BV8 March 5-8, 2013 Wireless Module © 2013 PCTEST Engineering Laboratory, Inc. REV 1.7AWSC 12/10/09 Applicant Name: Date of Testing: Harris Corporation March 5-8, 2013 150 Apollo Drive Test Site/Location: Chelmsford, MA 01824 PCTEST Lab., Columbia, MD, USA USA Test Report Serial No.: 0Y1303040410.BV8 FCC ID: BV8BBPBM113 APPLICANT: HARRIS CORPORATION Application Type: Certification FCC Classification: Licensed Non-Broadcast Transmitter (TNB) FCC Rule Part(s): §2; §90 EUT Type: Wireless Module Model(s): PBM-113 Test Device Serial No.: identical prototype [S/N: Unit#2] Max. Max. LTE Band 1454M48G7D795.5QPSK0.21923.41 LTE Band 1454M46W7D795.516-QAM0.22123.44 Conducted Power Mode BW (MHz) Emission Designator Tx Frequency (MHz) Modulation This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in §2.947. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST ENGINEERING LABORATORY, INC. 6660-B Dobbin Road, Columbia, MD 21045 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com MEASUREMENT REPORT FCC Part 90 LTE FCC ID: BV8BBPBM113 FCC Pt. 90 LTE MEASUREMENT REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 2 of 25 0Y1303040410.BV8 March 5-8, 2013 Wireless Module © 2013 PCTEST Engineering Laboratory, Inc. REV 1.7AWSC 12/10/09 TABLE OF CONTENTS FCC PART 90 MEASUREMENT REPORT..................................................................................3 1.0 INTRODUCTION .............................................................................................................................. 4 1.1 SCOPE ................................................................................................................................................ 4 1.2 TESTING FACILITY ............................................................................................................................. 4 2.0 PRODUCT INFORMATION .............................................................................................................. 5 2.1 EQUIPMENT DESCRIPTION .............................................................................................................. 5 2.2 EUT CAPABILITIES ............................................................................................................................. 5 2.3 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS ........................................................................... 5 2.4 LABELING REQUIREMENTS .............................................................................................................. 5 3.0 DESCRIPTION OF TESTS .............................................................................................................. 6 3.1 MEASUREMENT PROCEDURE ......................................................................................................... 6 3.2 OCCUPIED BANDWIDTH EMISSION LIMITS .................................................................................... 6 3.3 EMISSIONS MASK B .......................................................................................................................... 6 3.4 793-798MHZ FREQUENCY BAND ...................................................................................................... 7 3.5 SPURIOUS AND HARMONIC EMISSIONS AT ANTENNA TERMINAL .............................................. 7 3.6 RADIATED POWER AND RADIATED SPURIOUS EMISSIONS ........................................................ 7 3.7 FREQUENCY STABILITY / TEMPERATURE VARIATION ................................................................. 8 4.0 TEST EQUIPMENT CALIBRATION DATA ...................................................................................... 9 5.0 SAMPLE CALCULATIONS ............................................................................................................ 10 6.0 TEST RESULTS ............................................................................................................................. 11 6.1 SUMMARY ......................................................................................................................................... 11 6.2 CONDUCTED OUTPUT POWER ...................................................................................................... 12 6.3 RADIATED SPURIOUS EMISSIONS ................................................................................................ 13 6.4 RADIATED SPURIOUS EMISSIONS IN 1559 – 1610MHZ BAND .................................................... 14 6.5 FREQUENCY STABILITY MEASUREMENTS .................................................................................. 15 7.0 PLOT(S) OF EMISSIONS .............................................................................................................. 17 8.0 CONCLUSION ................................................................................................................................ 25 FCC ID: BV8BBPBM113 FCC Pt. 90 LTE MEASUREMENT REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 3 of 25 0Y1303040410.BV8 March 5-8, 2013 Wireless Module © 2013 PCTEST Engineering Laboratory, Inc. REV 1.7AWSC 12/10/09 MEASUREMENT REPORT FCC Part 90 §2.1033 General Information APPLICANT: Harris Corporation APPLICANT ADDRESS: 150 Apollo Drive Chelmsford, MA 01824, USA TEST SITE: PCTEST E…

Text truncated - open the document above for the full version.

FCC ID: BV8BBPBM113 FCC Pt. 27 LTE MEASUREMENT REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 1 of 35 0Y1303040410.BV8 March 5-8, 2013 Wireless Module © 2013 PCTEST Engineering Laboratory, Inc. REV 1.7AWSC 12/10/09 Applicant Name: Date of Testing: Harris Corporation March 5-8, 2013 150 Apollo Drive Test Site/Location: Chelmsford, MA 01824 PCTEST Lab., Columbia, MD, USA USA Test Report Serial No.: 0Y1303040410.BV8 FCC ID: BV8BBPBM113 APPLICANT: HARRIS CORPORATION Application Type: Certification FCC Classification: Licensed Non-Broadcast Transmitter (TNB) FCC Rule Part(s): §2; §27 EUT Type: Wireless Module Model(s): PBM-113 Test Device Serial No.: identical prototype [S/N: Unit#2] Max. Max. LTE Band 1354M45G7D779.5 - 784.5QPSK0.21023.23 LTE Band 1354M48W7D 779.5 - 784.516-QAM0.22223.46 LTE Band 13108M91G7D782QPSK0.21923.40 LTE Band 13108M94W7D78216-QAM0.22123.45 Conducted Power Mode BW (MHz) Emission Designator Tx Frequency (MHz) Modulation This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in §2.947. Test results reported herein relate only to the item(s) tested. I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. PCTEST ENGINEERING LABORATORY, INC. 7185 Oakland Mills Road, Columbia, MD 21046 USA Tel. 410.290.6652 / Fax 410.290.6654 http://www.pctestlab.com MEASUREMENT REPORT FCC Part 27 LTE FCC ID: BV8BBPBM113 FCC Pt. 27 LTE MEASUREMENT REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 2 of 35 0Y1303040410.BV8 March 5-8, 2013 Wireless Module © 2013 PCTEST Engineering Laboratory, Inc. REV 1.7AWSC 12/10/09 TABLE OF CONTENTS FCC PART 27 MEASUREMENT REPORT..................................................................................3 1.0 INTRODUCTION .............................................................................................................................. 4 1.1 SCOPE ................................................................................................................................................ 4 1.2 TESTING FACILITY ............................................................................................................................. 4 2.0 PRODUCT INFORMATION .............................................................................................................. 5 2.1 EQUIPMENT DESCRIPTION .............................................................................................................. 5 2.2 EUT CAPABILITIES ............................................................................................................................. 5 2.3 EMI SUPPRESSION DEVICE(S)/MODIFICATIONS ........................................................................... 5 2.4 LABELING REQUIREMENTS .............................................................................................................. 5 3.0 DESCRIPTION OF TESTS .............................................................................................................. 6 3.1 MEASUREMENT PROCEDURE ......................................................................................................... 6 3.2 OCCUPIED BANDWIDTH AND EMISSION LIMITS ............................................................................ 6 3.3 SPURIOUS AND HARMONIC EMISSIONS AT ANTENNA TERMINAL .............................................. 6 3.4 RADIATED SPURIOUS EMISSIONS .................................................................................................. 7 3.5 FREQUENCY STABILITY / TEMPERATURE VARIATION ................................................................. 7 4.0 TEST EQUIPMENT CALIBRATION DATA ...................................................................................... 8 5.0 SAMPLE CALCULATIONS .............................................................................................................. 9 6.0 TEST RESULTS ............................................................................................................................. 10 6.1 SUMMARY ......................................................................................................................................... 10 6.2 CONDUCTED OUTPUT POWER ...................................................................................................... 11 6.3 RADIATED SPURIOUS EMISSIONS ................................................................................................ 12 6.4 RADIATED SPURIOUS EMISSIONS IN 1559 – 1610MHZ BAND .................................................... 16 6.5 FREQUENCY STABILITY .................................................................................................................. 17 7.0 PLOTS OF EMISSIONS 10MHZ BAND 13 .................................................................................... 19 8.0 PLOTS OF EMISSIONS 5MHZ BAND 13 ...................................................................................... 26 9.0 CONCLUSION ................................................................................................................................ 35 FCC ID: BV8BBPBM113 FCC Pt. 27 LTE MEASUREMENT REPORT (CERTIFICATION) Reviewed by: Quality Manager Test Report S/N: Test Dates: EUT Type: Page 3 of 35 0Y1303040410.BV8 March 5-8, 2013 Wireless Module © 2013 PCTEST Engineering Laboratory, Inc. REV 1.7AWSC 12/10/09 MEASUREMENT REPORT FCC Part 27 §2.1033 General Information APPLICANT: Harris Corporation APPLICANT ADDRESS: 150 Apollo Drive Chelmsford, MA 01824, USA TEST SITE: PCTEST ENGINEERING LABORATORY, INC. TE…

Text truncated - open the document above for the full version.

Harris FCC ID: BV8BBPBM113 Model: PBM-113 Test Set-Up Photos EUT Type: Wireless Module Page 1 of 2 © 2013 PCTEST Engineering Laboratory Inc. TEST SETUP PHOTOGRAPHS Harris FCC ID: BV8BBPBM113 Model: PBM-113 Test Set-Up Photos EUT Type: Wireless Module Page 2 of 2 © 2013 PCTEST Engineering Laboratory Inc.