BVCAMB9012Label Deactivator Controller

Covered Equipment Certification Attestation Letter March 15, 2024 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: BVCAMB9012 Sensormatic USA LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section §2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Sensormatic USA LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: Mark Alexis Title: Manager Regulatory - Sensormatic Company Name: Sensormatic USA LLC Date: March 11, 2024

* the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. ** the agent does not have an FRN because they do no other business with the FCC except for acting as a US agent for service of process, and therefore are not required to have their own FRN. U.S. Agent Designation for Service of Process - Certification Attestation Letter March 15, 2024 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: BVCAMB9012 Applicant FRN: 0005052626 Per section §2.911(d)(7) of the FCC rules, Sensormatic USA LLC (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: Sensormatic USA LLC Physical U.S. Company Address: 6600 Congress Ave., Boca Raton FL 33487 USA Agent Name: Mark Alexis Agent Email Address: [email protected] Agent FRN**: 0005052626 The above contact person accepts the obligation for service of process. The applicant accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant/Agent Signed: Signed: Printed name: Mark Alexis Title: Manager Regulatory Sensormatic Company Name: Sensormatic USA LLC Date: March 11, 2024

Sensormatic USA LLC 6600 Congress Ave Boca Raton, FL USA 33487 (561) 912-6032 TO: Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent for FCC and ISED application We hereby authorize Spencer Zhong of Nemko Canada, Inc. at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, to represent us in the process of obtaining equipment certification for this application. We confirm that the documents we submitted accurately describe the device or system for which we seek certification. We also confirm that every unit we produce, import or market, as defined in FCC and in ISED Canada’s regulations, will bear a label identical to the one we submitted for approval with this application. By signing this letter, we certify that neither we nor any party to the application is subject to a denial of Federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 due to a conviction for possession or distribution of a controlled substance. Moreover, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we are aware of the grantee responsibilities (47 CFR 2.909) regarding certified equipment. In cases where our authorized agent signs the application for certification on our behalf, we acknowledge that we remain responsible for complying with the terms and conditions for certification, as specified by Nemko Canada Inc. Dated: March 15, 2024 Agency agreement expiration date: 2025-03-11 *Up to 12 months Signed by: Mark Alexis Signature Print name Manager Regulatory - Sensormatic Title 561-912-6032 Phone On behalf of: Sensormatic USA LLC Company name

March 15, 2024 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Request for Confidentiality – FCC FCC ID: BVCAMB9012 Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. We request the exhibits selected below as long term confidential (LTC) be withheld from public view permanently: Selection of exhibits for LTC - general Exhibit name ☒ Permanent (Long Term) Block Diagrams ☒ Permanent (Long Term) Operation Description / Theory of Operation ☒ Permanent (Long Term) Parts List & Placement / BOM ☒ Permanent (Long Term) Schematics Selection of exhibits for LTC - specific 1 Exhibit name ☐ Permanent (Long Term) Tune-Up Procedure ☐ Permanent (Long Term) SDR 2 Software / Security Info Selection of exhibits for LTC (with NDA) 3 Exhibit name ☐ Permanent (Long Term) User’s Manual ☐ Permanent (Long Term) Internal Photos We also request the exhibits selected below as short term confidential (STC) be withheld from public view for a period of 90 days 4 from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public: Selection of exhibits for STC 5 Exhibit name ☐ Short Term Block Diagrams ☐ Short Term Operation Description / Theory of Operation ☐ Short Term Parts List & Placement / BOM ☐ Short Term Schematics ☒ Short Term User’s Manual ☒ Short Term Internal Photos ☒ Short Term External Photos ☒ Short Term Test Setup Photos ☐ Short Term Tune-Up Procedure (for Licensed equipment only) Our company has spent a substantial effort in developing this product and it is one of the first of its kind in the industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. 1 - Tune up procedure is applicable only for licensed equipment. 2 - The FCC rules require that any radio, in which the software is designed or expected to be modified by a party other than the manufacturer that would affect the operating parameters of frequency range, modulation type, maximum output power or other radio frequency parameters outside the range under which the transmitter has been approved in accordance with the FCC rules, must be certified as a software-defined radio (SDR). 3 - These items require further information to be provided to TCB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and review section II, 3) regarding specific information (NDA) that must accompany these requests. 4 - Number of days can be listed up to 180 but should not go past the date of beginning of product marketing/sale. 5 - Any exhibits that may have already been requested to have “Permanent” confidentiality need not be repeated under Short-Term confidentiality request. When the device is marketed before the requested number of days listed above, the grantee will inform the TCB to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed by: Mark Alexis Signature Print name Manager Regulatory - Sensormatic Title 561-912-6032 Phone Sensormatic USA LLC Company 6600 Congress Ave, Boca Raton FL 33487 Address

Label design: Label location: Label placement

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa/Almonte); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) C h o o s e S c a n d i n a v i a n t r u s t RADIO TEST REPORT Report ID: Project number: REP055009 PRJ52103356 Type of assessment: SAR Exemption report Manufacturer: Hardware Version Identification Number (HVIN): Sensormatic USA LLC LFAMB2102 Product Marketing Name (PMN): Label Deactivator Controller FCC ID: ISED certification number: BVCAMB9012 3506A-AMB9012 Specifications:  FCC 47 CFR Part 2 Subpart J, §2.1093  FCC KDB 447498 D01 General RF Exposure Guidance v06  ISED Canada RSS-102 Issue 5 Amendment 1, (February 2021)  Supplementary Procedure SPR-002, Issue 2  Health Canada Safety Code 6 RSS-102 Annex C Attestation: I attest that the radiocommunication apparatus meets the exemption from the routine evaluation limits in these standards; that the Technical Brief was prepared and the information contained therein is correct; that the device evaluation was performed or supervised by me; that applicable measurement methods and evaluation methodologies have been followed; and that the device meets the SAR and/or RF field strength limits of the above standards. Date of issue: September 5, 2024 Tarek Elkholy, EMC/RF Specialist Prepared by Signature Report reference ID: REP055009 Page 2 of 7 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site identifier Organization Ottawa Montreal Cambridge FCC: CA2040 CA2041 CA0101 ISED: 2040A-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: REP055009 Page 3 of 7 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Section 1 Evaluation summary ........................................................................................................................................................................... 4 1.1 SAR exemption for standalone transmission, FCC .................................................................................................................................................... 4 1.2 Nerve Stimulation test, ISED ..................................................................................................................................................................................... 5 Section 1.1 SAR exemption for standalone transmission, FCC Report reference ID: REP055009 Page 4 of 7 Section 1 Evaluation summary 1.1 SAR exemption for standalone transmission, FCC 1.1.1 References, definitions and limits FCC §2.1093 (2) The SAR limits for general population/uncontrolled exposure are 0.08 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 1.6 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit is 4 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 30 minutes to determine compliance with general population/uncontrolled SAR limits. FCC KDB 447498 D01 4.3.1 Standalone SAR test exclusion considerations c For frequencies below 100 MHz, the following may be considered for SAR test exclusion (also illustrated in Appendix C) 1) For test separation distances > 50 mm and < 200 mm, the power threshold at the corresponding test separation distance at 100 MHz in step b) is multiplied by [1 + log(100/f(MHz))] 2) For test separation distances ≤ 50 mm, the power threshold determined by the equation in c) 1) for 50 mm and 100 MHz is multiplied by ½ 3) SAR measurement procedures are not established below 100 MHz. Appendix C Table 1.1-1: SAR Test Exclusion Thresholds (mW) for < 100 MHz and < 200 mm Separation: <50 mm 50 mm 60 mm 70 mm 80 mm 90 mm 100 mm 110 mm 120 mm 130 mm 140 mm 150 mm 160 mm 170 mm 180 mm 190 mm 100 MHz 237 474 481 487 494 501 507 514 521 527 534 541 547 554 561 567 50 MHz 308 617 625 634 643 651 660 669 677 686 695 703 712 721 729 738 10 MHz 474 948 961 975 988 1001 1015 1028 1041 1055 1068 1081 1095 1108 1121 1135 1 MHz 711 1422 1442 1462 1482 1502 1522 1542 1562 1582 1602 1622 1642 1662 1682 1702 0.1 MHz 948 1896 1923 1949 1976 2003 2029 2056 2083 2109 2136 2163 2189 2216 2243 2269 0.05 MHz 1019 2039 2067 2096 2125 215…

Text truncated - open the document above for the full version.

www.nemko.com Nemko Canada Inc., a testing laboratory, is accredited by ANSI National Accreditation Board (ANAB). The tests included in this report are within the scope of this accreditation. The ANAB symbol is an official symbol of the ANSI National Accreditation Board, used under licence. ANAB File Number: AT-3195 (Ottawa/Almonte); AT-3193 (Pointe-Claire); AT-3194 (Cambridge) FCC 15.225, RSS-210 RFID; Date: May 2023 C h o o s e S c a n d i n a v i a n t r u s t RADIO TEST REPORT Report ID: Project number: REP043672 PRJ52103356 Type of assessment: Final product testing Applicant: Description of the product: Sensormatic USA LLC Label Deactivator Controller Model (HVIN): Product marketing name (PMN): LFAMB2102 Label Deactivator Controller FCC identifier: ISED certification number: FCC ID: BVCAMB9012 IC: 3506A-AMB9012 Specifications:  FCC 47 CFR Part 15 Subpart C  RSS-210, Issue 11, June 2024 Date of issue: August 13, 2024 Tarek Elkholy, Wireless/EMC Specialist Tested by Signature Alvin Liu, Wireless/EMC Specialist Reviewed by Signature Report reference ID: REP043672 Page 2 of 30 Lab locations Company name Nemko Canada Inc. Facilities Ottawa site: 303 River Road Ottawa, Ontario Canada K1V 1H2 Tel: +1 613 737 9680 Fax: +1 613 737 9691 Montréal site: 292 Labrosse Avenue Pointe-Claire, Québec Canada H9R 5L8 Tel: +1 514 694 2684 Fax: +1 514 694 3528 Cambridge site: 1-130 Saltsman Drive Cambridge, Ontario Canada N3E 0B2 Tel: +1 519 650 4811 Test site identifier Organization Ottawa Montreal Cambridge FCC: CA2040 CA2041 CA0101 ISED: 2040A-4 2040G-5 24676 Website www.nemko.com Limits of responsibility Note that the results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. This test report has been completed in accordance with the requirements of ISO/IEC 17025. All results contained in this report are within Nemko Canada’s ISO/IEC 17025 accreditation. Copyright notification Nemko Canada Inc. authorizes the applicant to reproduce this report provided it is reproduced in its entirety and for use by the company’s employees only. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. Nemko Canada Inc. accepts no responsibility for damages, if any, suffered by any third party as a result of decisions made or actions based on this report. © Nemko Canada Inc. Report reference ID: REP043672 Page 3 of 30 Table of Contents Table of Contents ......................................................................................................................................................................................................... 3 Section 1 Report summary ................................................................................................................................................................................. 4 1.1 Test specifications .................................................................................................................................................................................................... 4 1.2 Test methods ............................................................................................................................................................................................................ 4 1.3 Exclusions ................................................................................................................................................................................................................. 4 1.4 Statement of compliance .......................................................................................................................................................................................... 4 1.5 Test report revision history ....................................................................................................................................................................................... 4 Section 2 Engineering considerations ................................................................................................................................................................. 5 2.1 Modifications incorporated in the EUT for compliance ............................................................................................................................................ 5 2.2 Technical judgment .................................................................................................................................................................................................. 5 2.3 Deviations from laboratory tests procedures ........................................................................................................................................................... 5 Section 3 Test conditions ................................................................................................................................................................................... 6 3.1 Power supply range .................................................................................................................................................................................................. 6 Section 4 Information provided by the applicant ................................................................................................................................................ 7 4.1 Disclaimer ................................................................................................................................................................................................................. 7 4.2 Applicant/Manufacturer ........................................................................................................................................................................................... 7 4.3…

Text truncated - open the document above for the full version.

ANT-LG-100 RevA Loop Antennas Data Sheet Type:Loop Antenna Polarization:Linear Pattern Type:Omidirectional Frequency Minumum:100 Hz Frequency Maximum:60 KHz Model/ModuleProduct CodeP/NChannel (X/Y)Gain (dBi)Type AMB 5014ZBAMB60011811-0103-02X-122Loop, Air Core AMB 5195ZBAMB60031811-0103-04X-121Loop, Air Core AMB 5500ZBAMB60021811-0103-03X-129Loop, Air Core AMB-5010ZBAMB5010A20404-0739-01X-116Loop, Air Core AMB-5010ZBAMB5010A0505-4514-01Y-117Loop, Air Core AMB-5010ZBAMB5010A 0404-0571-01X -117Loop, Air Core AMB-5014ZBAMB5014A0101-0857-01Y-125Loop, Air Core AMB-5120ZBAMB5120H0101-0525-01X-121Loop, Air Core AMB-5184ZBAMB5184A0404-0542-01X-117Loop, Air Core AMB-5190ZBAMB5190A 0101-0340-01 X -116 Loop, Air Core AMB-5194ZBAMB5194L0101-0716-01X-121Loop, Air Core AMB-5196ZBAMB5196A0101-0853-01X-121Loop, Air Core AMB-5199ZBAMB5199A0101-0847-01X-122Loop, Air Core AMB-5212ZBAMB5212A0101-0786-01X-119Loop, Air Core AMB-5274ZBAMB5274H0404-0603-01X-119Loop, Air Core AMB-5274ZBAMB5274V0404-0604-01Y-121Loop, Air Core AMB-5277ZBAMB5277H0101-0728-01X-119Loop, Air Core AMB-5277ZBAMB5277V0101-0729-01Y-120Loop, Air Core AMB-5278ZBAMB5278A0101-0240-01X-124Loop, Air Core AMB-5279ZBAMB5279A0101-0786-01X-119Loop, Air Core AMB-5290ZBAMB5290A 0404-1133-01X -132Loop, Air Core AMB-5310ZBAMB5318V0101-0543-01X-115Loop, Air Core AMB-5310ZBAMB5318H0101-0542-01Y-115Loop, Air Core AMB-5410HZBAMB5410H0101-0569-01X-127Loop, Air Core AMB-5410VZBAMB5410V0101-0570-01Y-118Loop, Air Core AMB-5470ZBAMB5470A0101-0726-01X-115Loop, Air Core AMB-5472ZMANB5472A0404-1422-01X-119Loop, Air Core AMB-5780ZBAMB57800201-0019-01X-114Loop, Air Core AMB-5900ZBAMB5900A0404-1410-01X-118Loop, Air Core ANAMB-23021811-0103-011811-0103-01X-113Loop, Air Core ANAMB-24021811-0104-011811-0104-01X-110Loop, Air Core DEAC STP-CDZBSMPCPE0304-0038-03X-122Loop, Ferrite Core DEAC STP-CDZBSMPCPE0304-0038-03Y-123Loop, Ferrite Core DEAC STP-LDZBSMPLPE0304-0036-03X-119Loop, Ferrite Core DEAC STP-LDZBSMPLPE0304-0036-03Y-119Loop, Ferrite Core DEAC STP-LPZBSMPLP0304-0036-01X-118Loop, Ferrite Core DEAC STP-PDZBSMPPPE0304-0034-02X-119Loop, Ferrite Core DEAC STP-PDZBSMPPPE0304-0034-02Y-120Loop, Ferrite Core DEAC STP-SDZBSMPSP0304-0035-01X-118Loop, Ferrite Core