BVCAMS1137HAnti Theft System - Electronic Asset Security

Sensormatic 6600 Congress Ave, Boca Raton FL USA 33487 Covered Equipment Certification Attestation Letter 11/24/2025 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: BVCAMS1137H Tyco Safety Products/Sensormatic (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Tyco Safety Products/Sensormatic (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Tyco Safety Products/Sensormatic (“the applicant”) certifies that the equipment for which authorization issought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity oranti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Sensormatic 6600 Congress Ave, Boca Raton FL USA 33487 Printed name: Mark Alexis Title: Manager Regulatory Compliance Company Name: Tyco Safety Products/Sensormatic Date: 11/24/2025

Sensormatic 6600 Congress Ave, Boca Raton FL USA 33487 * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter November 24, 2025 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: BVCAMS1137H Per section 2.911(d)(7) of the FCC rules, Tyco Safety Products/Sensormatic (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent* for service of process: Company Name: Tyco Safety Products/Sensormatic Physical U.S. Company Address: 6600 Congress Ave, Boca Raton，Florida，33487 Agent name: Mark Alexis Agent Email Address: [email protected] FRN: 0005052626 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Signed: Printed name: Mark Alexis Printed name: Mark Alexis Title: Manager Regulatory Compliance Title: Manager Regulatory Compliance Company Name: Tyco Safety Products/Sensormatic Company Name: Tyco Safety Products/Sensormatic Date: November 24, 2025Date: November 24, 2025 FRN Code: 0005052626 FRN Code: 0005052626

Sensormatic 6600 Congress Ave, Boca Raton FL USA 33487 November 24, 2025 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: BVCAMS1137H Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. We also request short-term confidentiality on certain exhibits until the intended date of marketing as outlined below. We request the exhibits be withheld from public view for a period of 180 (cannot exceed 180 days) days. We attest marketing of the product will only commence after the period of short-term confidentiality expires, or if marketing is to commence before the requested number of days listed above, the grantee will inform Nemko to release the Short-Term Confidentiality information withheld on the FCC equipment authorization website. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☒ Short Term Internal Photos ☐ Permanent* ☒ Short Term Operation Description ☒ Permanent ☐ Short Term Parts List & Placement/BOM ☐ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term Test Setup Photos ------------------ ☒ Short Term User’s Manual ☐ Permanent* ☒ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Note: any documents held under the Short-Term confidentiality will automatically become public after the requested time if an appropriate extension request has not been received. Any exhibits (i.e., schematic diagrams) that may have already been requested to have “Permanent” confidentiality as shown above need not be repeated under Short-Term confidentiality request. Sincerely, Signed: Printed name: Mark Alexis Title: Manager Regulatory Compliance Company Name: Tyco Safety Products/Sensormatic

Sensormatic 6600 Congress Ave, Boca Raton FL USA 33487 Family Certification Attestation Letter Nemko Canada Inc 303 River Road Ottawa K1V 1H2 Canada Company Name: Tyco Safety Products/Sensormatic FCC ID: BVC AMS1137H Models: ZA1137-H2, ZA1167-H2 We hereby request Family Certification for the above mentioned Models based on them being electrically identical. Above models are identical in schematic and structure, only the plastic housing is different for all the models, therefore the test performed on the model __ZA1137­H2 Printed name: Mark Alexis Title: Manager Regulatory Compliance Date: 24 November 2025

We hereby declare the model differences. Differences for added new models as below: Model name ZA1137-H2ZA1167-H2 Structural designs Design Type A (ABS) Design Type B (Acrylic) Door frame ABS plastic material Acrylic plastic material The two models have the same electric diagram, PCB layout, RF chip and antenna, which have no influence on RF performance. Company: Tyco Safety Products/Sensormatic Contact Person: Mark Alexis Position: Manager Regulatory Compliance Date: 2025-11-24

RF EXPOSURE REPORT Applicant : Nanjing Fenghou Electronics Co., LTD Address : 5th Floor, Building 10, Runcheng Science and Technology Park, No. 8 Longtai Road, Pukou District, Nanjing City, Jiangsu Province, China Equipment under Test : AM anti-theft system Model No. : ZA1137-H2, ZA1167-H2 Trade Mark : N/A FCC ID : BVCAMS1137H Manufacturer : Nanjing Fenghou Electronics Co., LTD Address : 5th Floor, Building 10, Runcheng Science and Technology Park, No. 8 Longtai Road, Pukou District, Nanjing City, Jiangsu Province, China Issued By : Suzhou Dongdian Testing Service Co., Ltd. Address : Phase Il, No.16 Runsheng Road, Suzhou Industrial Park, Suzhou, People’s Republic of China Tel: +86-0512-62531270, E-mail: [email protected], http://www.ddttest.com Suzhou Dongdian Testing Service Co., Ltd. Report No.:DDT-B25100911-2E02 QR-4(SUZ)-106-E72 RevA1 Page 2 of 8 TABLE OF CONTENTS Test report declares......................................................................................................3 1. General information ........................................................................................................ 5 1.1. Description of Equipment ............................................................................................... 5 1.2. Assess laboratory ........................................................................................................... 6 2. RF Exposure Evaluation ................................................................................................ 7 2.1. General SAR test exclusion guidance ........................................................................... 7 2.2. Calculation method ........................................................................................................ 8 2.3. Estimation result ............................................................................................................. 8 Suzhou Dongdian Testing Service Co., Ltd. Report No.:DDT-B25100911-2E02 QR-4(SUZ)-106-E72 RevA1 Page 3 of 8 TEST REPORT DECLARE Standard Used: KDB447498 D01 General RF Exposure Guidance v06 We Declare: The equipment described above is assessed by Suzhou Dongdian Testing Service Co., Ltd. and in the configuration assessed the equipment complied with the standards specified above. The assessed results are contained in this report and Suzhou Dongdian Testing Service Co., Ltd. is assumed of full responsibility for the accuracy and completeness of these assess. After evaluation, our opinion is that the equipment In Accordance with above standard. Report No: DDT-B25100911-2E02 Sample No: Y25100911-02 Date of Receipt: Oct. 13, 2025 Date of Test: Oct. 13, 2025 ~ Oct. 16, 2025 Prepared By: Reviewed By: Authorized By: Bacon Dong/Engineer Vane Xia/Director Leon Wu/Director Note: This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Suzhou Dongdian Testing Service Co., Ltd.. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Applicant : Nanjing Fenghou Electronics Co., LTD Address : 5th Floor, Building 10, Runcheng Science and Technology Park, No. 8 Longtai Road, Pukou District, Nanjing City, Jiangsu Province, China Equipment under Test : AM anti-theft system Model No. : ZA1137-H2, ZA1167-H2 Trade mark : N/A Manufacturer : Nanjing Fenghou Electronics Co., LTD Address : 5th Floor, Building 10, Runcheng Science and Technology Park, No. 8 Longtai Road, Pukou District, Nanjing City, Jiangsu Province, China Suzhou Dongdian Testing Service Co., Ltd. Report No.:DDT-B25100911-2E02 QR-4(SUZ)-106-E72 RevA1 Page 4 of 8 Revision History Rev. Revisions Issue Date Revised By --- Initial issue Oct. 17, 2025 Suzhou Dongdian Testing Service Co., Ltd. Report No.:DDT-B25100911-2E02 QR-4(SUZ)-106-E72 RevA1 Page 5 of 8 1. General information 1.1. Description of Equipment Note: EUT is the ab. of equipment under test. EUT* Name : AM anti-theft system Model Number : ZA1137-H2, ZA1167-H2 Model Differences The difference between models ZA1137-H2 and ZA1167-H2 lies in the material of the casing; everything else is the same. ZA1137-H2 is made of ABS material, while ZA1167-H2 is made of acrylic material. ZA1137-H2 is composed of ZS1137-HS and ZS1137-HP. ZA1167-L2 is composed of ZS1167-HS and ZS1167-HP. EUT function description : Please reference user manual of this device Power supply : AC 240V 60Hz Operation frequency : 58kHz Number of Channel : 1 Antenna Type : Inductive loop coil antenna Sample Number : N/A Suzhou Dongdian Testing Service Co., Ltd. Report No.:DDT-B25100911-2E02 QR-4(SUZ)-106-E72 RevA1 Page 6 of 8 1.2. Assess laboratory Lab Information Company Name: Suzhou Dongdian Testing Service Co., Ltd. Address: Phase Il, No.16 Runsheng Road, Suzhou Industrial Park, Suzhou, People’s Republic of China Tel: +86-0512-62531270, E-mail: [email protected], http://www.ddttest.com Accreditation Certificate A2LA (Certificate No.: 7346.01) Suzhou Dongdian Testing Service Co., Ltd. has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1397) Suzhou Dongdian Testing Service Co., Ltd. has been recognized to perform compliance testing on equipment subject to the Commission's Declaration of Conformity (DoC) and Certification rules. IC (IC Designation No.: 32952; CAB No.:CN0182) Suzhou Dongdian Testing Service Co., Ltd. has been recognized to perform compliance testing on equipment subject to the Commission's Declaration of Conformity (DoC) and Certification rules. Note 1: All tests measurement facilities use to collect the measurement data are located at Phase Il, No.16 Runsheng Road, Suzhou Industrial Park, Suzhou, People’s Republic of China Note 2: For below 30MHz, lab had performed measurements at test anechoic chamber and comparing to measurements obtained on an open field site. These measurements below 30MHz had been correlated to measurements performed on an …

Text truncated - open the document above for the full version.

Antenna Information 1. Manufacturer’s name: Nanjing Fenghou Electronics Co., Ltd 2. manufacturer’s address: Floor 5th,Building 10th,Runcheng Science and Technology Park,Longtai Road,Pukou District,Nanjing ,China 3. Antenna model name: 1167 Antenna 4. Antenna size: 123*35*4CM (Stent frame inner coil size) 5. Antenna Gain: Only radiated measurements are used to show compliance with FCC limits for fundamental and spurious emissions..

Suzhou Dongdian Testing Service Co., Ltd Report No.: QR-4(SUZ)-106-E68 RevA1 Page 1 of 26 FCC CERTIFICATION TEST REPORT Report No.: DDT-B25100911-2E01 Applicant : Nanjing Fenghou Electronics Co., LTD Address : 5th Floor, Building 10, Runcheng Science and Technology Park, No. 8 Longtai Road, Pukou District, Nanjing City, Jiangsu Province, China Manufacturer : Nanjing Fenghou Electronics Co., LTD Address : 5th Floor, Building 10, Runcheng Science and Technology Park, No. 8 Longtai Road, Pukou District, Nanjing City, Jiangsu Province, China Equipment under Test : AM anti-theft system Model No. : ZA1137-H2, ZA1167-H2 Trade Mark : N/A FCC ID BVCAMS1137H Report No. : DDT-B25100911-2E01 Issue Date : Oct. 17, 2025 Issued By : Suzhou Dongdian Testing Service Co., Ltd. Address : Phase Il, No.16 Runsheng Road, Suzhou Industrial Park, Suzhou, People’s Republic of China Tel: +86-0512-62531270, E-mail: [email protected], http://www.ddttest.com Suzhou Dongdian Testing Service Co., Ltd Report No.: QR-4(SUZ)-106-E68 RevA1 Page 2 of 26 TABLE OF CONTENTS Test report declares........................................................................................................3 1 Summary of test results ................................................................................................. 5 2 General test information ................................................................................................. 6 2.1. Description of EUT ......................................................................................................... 6 2.2. Accessories of EUT ........................................................................................................ 7 2.3. Assistant equipment used for test .................................................................................. 7 2.4. Block diagram of EUT configuration for test .................................................................. 7 2.5. Deviations of test standard............................................................................................. 7 2.6. Test environment conditions .......................................................................................... 7 2.7. Test laboratory ............................................................................................................... 7 2.8. Measurement uncertainty ............................................................................................... 8 3 Equipment used during test ........................................................................................... 9 4 20dB Bandwidth ........................................................................................................... 10 4.1. General Information ..................................................................................................... 10 4.2. Block diagram of test setup .......................................................................................... 10 4.3. Limits ............................................................................................................................ 10 4.4. Test Procedure ............................................................................................................. 10 4.5. Test Result ................................................................................................................... 11 4.6. Original test data .......................................................................................................... 12 5 Radiated emission ........................................................................................................ 13 5.1. General Information ..................................................................................................... 13 5.2. Block diagram of test setup .......................................................................................... 13 5.3. Limit .............................................................................................................................. 14 5.4. Test Procedure ............................................................................................................. 14 5.5. Test result ..................................................................................................................... 15 6 Power Line Conducted Emission ................................................................................. 20 6.1. General Information ..................................................................................................... 20 6.2. Block diagram of test setup .......................................................................................... 20 6.3. Power Line Conducted Emission Limits ...................................................................... 20 6.4. Test Procedure ............................................................................................................. 20 6.5. Test Result ................................................................................................................... 21 7 Antenna Requirements ................................................................................................ 24 8 Test setup photograph ................................................................................................. 25 9 Photos of the EUT ........................................................................................................ 26 Suzhou Dongdian Testing Service Co., Ltd Report No.: QR-4(SUZ)-106-E68 RevA1 Page 3 of 26 TEST REPORT DECLARE Test Standard Used: 47 CFR FCC Part 15 Subpart C Test procedure used: ANSI C63.10:2020+ Cor 1-2023+ amendment 1-2024 We Declare: The equipment described above is tested by Suzhou Dongdian Testing Service Co., Ltd and in the configuration tested the equipment complied with the standards specified above. The test results are contained in this test report and Suzhou Dongdian Testing Service Co., Ltd is assumed of full responsibility for the accuracy an…

Text truncated - open the document above for the full version.