CGDVP1004BVP1004-B System

Instruction Manual VP1004-B Safety Instructions 5287782 / Version 01.000 / December 2019 / EN Original instructions Livestock Management Copyright Copyright © Nedap N.V. All rights reserved. The information in this document is subject to change without notice, it is not to be reproduced in any way, in whole or in part, without the written consent of Nedap N.V. All trademarks referenced belong to their respective owners. Disclaimer Nedap N.V. has made every effort to ensure the accuracy of the information contained in this document. However, Nedap N.V. makes no representations or warranties whatsoever whether express or implied as to the accuracy, correctness, completeness or fit-for-purpose or suitability for the purpose of this product. You use the products at your own risk. Nedap N.V. excludes any liability to the maximum extent permitted by applicable law for the damages caused by errors or failures made during the installation or improper use of this product or by not applying the instructions stated in this document. Nedap N.V. reserves the right to make improvements or amendments to this document and/or the products described therein at any time without any notification. The latest version of this document can be found on the Nedap Livestock Management business portal (www.nedap.com/livestockmanagement-portal). Please download the latest version of this document (by yourself or reseller) and keep a copy for your own records. This document can be published in various languages but only the English language version will prevail. Nedap N.V. assumes no responsibility for any errors caused for the translations into another language. Warranty and spare parts Please consult the Nedap products dealer from whom you purchased this product, in regards to the applicable warranty conditions. This product cannot be used for any other purpose as described in this document. If the product is not installed according to this document; the warranty provided is not applicable. At the sole discretion of Nedap N.V., Nedap N.V. may decide to change the conditions of the warranty policy. You agree that Nedap N.V. is able to compensate you the pro-rata value of the warranty involved rather than replacing or repairing the product depending on the technical or economical value of the product. Prior to applying the warranty, please verify if you comply with the warranty conditions of the warranty policy, whether you can successfully apply for the replacement or repair of a defective part. Parts can only be replaced with original Nedap parts, otherwise the warranty policy will not be applicable on the product. If the warranty is applicable, please contact the dealer or send the defective parts to the dealer. Additional information For any information or questions regarding the product, please contact your own dealer. The installation manual for this product can be found at: www.nedap.com/livestockmanagement-portal VP1004-B / Safety Instructions 5287782 / Version 01.000 / December 2019 / EN 1 Livestock Management 1 Safety Read this manual before using this product. Failure to follow the instructions and safety precautions in this manual may result in serious injury or death. Keep this manual in a safe location for future reference. Symbols used in the manual Danger Indicates a hazardous situation that, if not avoided, will result in death or serious injury. Warning Indicates a hazardous situation that, if not avoided, could result in death or serious injury. Caution Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. Indicates important information but not hazard related. Suggestions and advice to perform certain tasks more easily. General safety instructions Warning Always turn off the mains power supply when working on the electrical installation. Warning Always wear proper protection when installing and maintaining the VP1004-B. Caution Use the VP1004-B only with a suitable power supply. The power supply or power adapter must comply with local regulations for a SELV, limited power (NEC class2, ps2) output (e.g. Nedap VP2001-B or Nedap power adapter (P/N 9223126)). Caution Installation and service should only be done by locally qualified personnel. Caution Install the system according to the local rules and regulations. Working environment Caution The installation area must be free from any obstacles, including animals. VP1004-B / Safety Instructions 5287782 / Version 01.000 / December 2019 / EN 2 Livestock Management Caution Make sure all components are installed out of reach of animals. Caution Make sure all cables are properly concealed, and form no danger for stumbling. Caution Take into account the high concentrations of ammonia when installing and maintaining the VP1004-B in pig barns. Animal welfare and safety The automated actions of the Nedap Livestock Management systems do never discharge the installer and the user of the system from his/her responsibility to assure and to take care of the well-being of the animals. VP1004-B / Safety Instructions 5287782 / Version 01.000 / December 2019 / EN 3 Livestock Management 2 Compliance FCC and ISED Compliance statement This device complies with part 15 of the FCC Rules and to RSS-210 of Innovation, Science and Economic Development Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Cet appareil se conforme aux normes RSS 210 exemptés de license d'Innovation, Sciences et Développement économique Canada. L'opération est soumis aux deux conditions suivantes: (1) cet appareil ne doit causer aucune interférence, et (2) cet appareil doit accepter n'importe quelle interférence, y inclus interférence qu…

Text truncated - open the document above for the full version.

Page: 1/1 of «DocRef» dated 16-11-2020 ® TÜV, TUEV a nd TUV are registered trademarks. Any use or application requires prior approval. To whom it may concern, On behalf of our customer Nedap N.V. we hereby would like to apply for an Original certification for the following device: FCC ID : CGDVP1004B IC : 1444A-VP1004B Manufacturer : Nedap N.V. Brand : Nedap Model : VP1004B Description : 134.2 kHz Inductive RFID tag Reader / Motor control The following PDF files (exhibits) are electronically submitted: 1. Cover letter (this document) 2. Request or confidentiality 3. Authorization letter 4. Form 731 5. Antenna information 6. Bill of material (BOM)- Not required-Not provided 7. Block diagram 8. Circuit diagram 9. Interior photographs 10. Exterior photographs 11. Label information 12. Operational description 13. Test report in conformity with 47 CFR Part 15 / RSS-Gen 14. Test setup photographs 15. User/installation manual 16. RF Exposure according ISED RSP-100 Annex A and RSS-102 Annex C Best regards, TÜV Rheinland Nederland B.V. R .van der Meer Test Engineer TÜV Rheinland Nederland B.V. Eiberkamp 10 9351VT Leek The Netherlands Telephone: +31 888887888 Internet: www.tuv.com/nl E-mail: [email protected]

Trade register: 08013836 | IBAN: NL08 ABNA 0453299555 | BIC: ANBNANL2A | VAT: NL006456285B01 The General Terms and Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website and can be provided upon request. November 17, 2020 Subject: Confidentiality Request for FCC ID: CGDVP1004B and IC: 1444A-VP1004B Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Nedap N. V. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: __________________________ Reinold Hubers____ (Signature/Title) (Print name) Compliance Manager Nedap N.V. Parallelweg 2 7141 DC GROENLO The Netherlands T: +31 (0)544 471 111 [email protected] www.nedap.com

Trade register: 08013836 | IBAN: NL08 ABNA 0453299555 | BIC: ANBNANL2A | VAT: NL006456285B01 The General Terms and Conditions of ICT-Office apply to all our offers and agreements. These conditions can be found at our website and can be provided upon request. November 13, 2020 Authority to Act as Agent To Whom It May Concern: ______Richard van der Meer of TÜV Rheinland Nederland B.V ______ is authorized to act on our behalf, until otherwise notified, for applications to TÜV Rheinland. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: December 31, 2021 By: __________________________ __Reinold Hubers_________ (Signature) (Print name) Title: _Compliance Manager________ Telephone:__+31 544 471111________________________ On behalf of: _ _Nedap N.V.___________ Nedap N.V. Parallelweg 2 7141 DC GROENLO The Netherlands T: +31 (0)544 471 111 [email protected] www.nedap.com

TÜV Rheinland Nederland B.V. Eiberkamp 10 9351VT Leek The Netherlands . ® TÜV, TUEV and TUV are registered trademarks. Utilisation and application requires prior approval. To whom it may concern, On behalf of our customer Nedap N.V., we hereby declare the antenna of the following device: FCC ID: CGDVP1004B IC: 1444A-VP1004B Manufacturer: Nedap N.V. Brand: Nedap Model: VP1004B The VP1004B can be connected to maximal eight antennas with a max. antenna current of 0.25A. Nedap magnetic loop antenna models VP6011 and/or VP6012. The antennas are identical , except for the VP 6011 the cable is attached on the bottom side and on the VP 6012 it is connected to the side. Size of both antennas is: (L*W*H) 285mm * 170mm *45mm. Best regards, TÜV Rheinland Nederland B.V. R. van der Meer Test Engineer

Testing and certification of electronic and electric appliances, systems, installations and telecommunication systems TÜV Rheinland Nederland B.V. Eiberkamp 10 9351VT Leek The Netherlands Telephone: +31 888887888 Internet: www.tuv.com/nl E-mail: [email protected] Project number: 20071401.p02 Page 1 of 7 PHOTOGRAPHS OF THE EXTERIOR OF A BRAND NEDAP, MODEL VP1004B Brand mark: Model: Nedap VP1004B Project number: 20071401.p02 Page 2 of 7 Table of contents 1 PHOTOGRAPHS OF THE EQUIPMENT. ............................................................................................................. 3 1.1 EXTERNAL VIEW. ............................................................................................................................................... 3 1.1.1 Top view. ................................................................................................................................................. 3 1.1.2 Bottom view. ............................................................................................................................................ 4 1.1.3 Front view. ............................................................................................................................................... 5 1.1.4 Rear view ................................................................................................................................................ 5 1.2 SIDE VIEWS ...................................................................................................................................................... 6 Brand mark: Model: Nedap VP1004B Project number: 20071401.p02 Page 3 of 7 1 Photographs of the equipment. 1.1 External view. 1.1.1 Top view. Brand mark: Model: Nedap VP1004B Project number: 20071401.p02 Page 4 of 7 1.1.2 Bottom view. Brand mark: Model: Nedap VP1004B Project number: 20071401.p02 Page 5 of 7 1.1.3 Front view. 1.1.4 Rear view Brand mark: Model: Nedap VP1004B Project number: 20071401.p02 Page 6 of 7 1.2 Side views Left side view Brand mark: Model: Nedap VP1004B Project number: 20071401.p02 Page 7 of 7 Right side view END OF REPORT

Label info Warning/statement label See next page for label positions Labels as positioned on back side of the device

Testing and certification of electronic and electric appliances, systems, installations and telecommunication systems TÜV Rheinland Nederland B.V. Eiberkamp 10 9351VT Leek The Netherlands Telephone: +31888887888 Internet: www.tuv.com/nl E-mail: [email protected] Project number: 20071401.p01 Page 1 of 6 PHOTOGRAPHS OF THE INTERIOR OF A BRAND NEDAP, MODEL VP1004B Brand mark: Model: Nedap VP1004B Project number: 20071401.p01 Page 2 of 6 Table of contents 1.1 INTERNAL VIEW 1, COVER REMOVED. ................................................................................................................. 3 1.2 INTERNAL VIEW 2, MAIN PCB ASSEMBLY AS REMOVED FROM THE UNIT ................................................................ 4 .................................................................................................................................................................................. 4 2 INNER ASSEMBLY, PCB VIEW .......................................................................................................................... 6 2.1 RF BOARD PCB VIEW, COMPONENT SIDE........................................................................................................... 6 2.2 RF BOARD PCB VIEW, BACK SIDE ..................................................................................................................... 6 Brand mark: Model: Nedap VP1004B Project number: 20071401.p01 Page 3 of 6 1.1 Internal view 1, cover removed. Brand mark: Model: Nedap VP1004B Project number: 20071401.p01 Page 4 of 6 1.2 Internal view 2, Main PCB assembly as removed from the unit Brand mark: Model: Nedap VP1004B Project number: 20071401.p01 Page 5 of 6 Brand mark: Model: Nedap VP1004B Project number: 20071401.p01 Page 6 of 6 2 Inner assembly, PCB view 2.1 RF Board PCB view, component side 2.2 RF Board PCB view, back side END OF REPORT

Prϋfberich - Produkte Test Report - Products Prüfbericht-Nr.: Test Report No.: 20071401.r02 Auftrags-Nr.: Order No.: 89217437 Seite 1 von 26 Page 1 of 26 Kunden-Referenz-Nr.: Client Reference No.: POC-LM-000674 Auftragsdatum: Order date: 2020-08-25 Auftraggeber: Client: Nedap N.V., Parallelweg 2 7141 DC Groenlo, Netherlands Prüfgegenstand: Test item: 134.2 kHz Inductive RFID tag Reader-Motor control Bezeichnung / Typ-Nr.: Identification / Type No.: VP1004B Auftrags-Inhalt: Order content: Compliance with regulatory requirements Prüfgrundlage: Test specification: 47 CFR PART 15 (10-1-19 EDITION), Subpart 15C RSS-Gen (Issue 5 April 2018) General Requirements for Compliance of Radio Apparatus and RSS-210 (Issue 10 Dec 2019) Licence-exempt Radio Apparatus. - Wareneingangsdatum: Date of receipt: 2020-09-23 Prüfmuster-Nr.: Test sample No.: 1229 + 1206 Prüfzeitraum: Testing period: 2020-11-01 / 2020-12-21 Ort der Prüfung: Place of testing: Leek Prüflaboratorium: Testing laboratory: TÜV Rheinland Nederland B.V. Leek Laboratory Prüfergebnis*: Test result*: Pass TÜV Rheinland Nederland B.V. . Eiberkamp 10 . 9351 VT Leek . Tel: + 31 88 8887888 Mail: [email protected] . Web: www.tuv.com gerprüft von / tested by: genehmigt von / authorized by: Datum /date: 2021-01-20 Richard van der Meer, Expert 2021-01-20 Ties Koning, Senior Expert Datum Date Name / Stellung Name / Position Unterschrift Signature Datum Date Name / Stellung Name / Position Unterschrift Signature Sonstiges / Other: issue date is equal to authorized date Zustand des Prüfgegenstandes be Anlieferung:2 Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: Legend: 1 = sehr gut P(ass) = entspricht o.g. 1 = very good P(ass) = passed a.m. 2 = gut Prüfgrundlage(n) 2 = good Test specification(s) 3 = befriedigend F(ail) = entspricht nicht o.g. Prüfgrundlage(n) 3 = satisfactory F(ail) a.m. test specification(s) 4 = ausreichend N/A = nicht anwendbar 4 = sufficient N/A = not applicable 5 = mangelhaft N/T/ = nicht getested 5 = poor N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwending eines Prüfzeichens. This test report only relates to the above mentioned testsample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This report does not entitle to carry any test mark V04 Prϋfbericht - Produkte Test Report - Products Test Report No.: 20071401.r02 Page 2 of 26 TEST SUMMARY Test Specification Clause Test Case Pass Fail Not applicable Not performed §15.209 / RSS-Gen Table 5 Radiated Emissions §15.207 / RSS-Gen Table 4 AC Power Line Conducted Emissions Revisions Revisions Revision Revision Datum Date Anmerkung Remark Verfasser Author - 2020.12.21 First release R. van der Meer 01 2021.01.20 4.1.3 note1, extended calculation of extrapolation factor R. van der Meer Note: Latest revision report will replace all previous reports Prϋfbericht - Produkte Test Report - Products Test Report No.: 20071401.r02 Page 3 of 26 1 Produktdetails Product details 134.2 kHz Inductive RFID tag Reader-Motor control 2 Maβe / Gewicht Dimensions / Weight L x W x H = 143 x 120 x 68 mm / ± 430 g 3 Bedienelemente Operating elements None 4 Ausstattung / Zubehör Equipment / Accessories 2x Switch, 1 x Lamp, 5 x Antenna, VP1001, Power Supply VP2002, VPU VP8002, Laptop 5 Verwendete Materialien Used materials None 6 Sonstiges Other none Prϋfbericht - Produkte Test Report - Products Test Report No.: 20071401.r02 Page 4 of 26 Contents 1. GENERAL REMARKS ............................................................................................... 5 1.1.1 Complementary Materials ............................................................................................................ 5 1.1.2 Special Accessories ..................................................................................................................... 5 1.1.3 Equipment modifications .............................................................................................................. 5 2. TEST SITES ............................................................................................................ 6 2.1 TEST FACILITIES ..................................................................................................... 6 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS TABLE 1: LIST OF TEST AND MEASUREMENT EQUIPMENT ..................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ................................................................................. 8 3. GENERAL PRODUCT INFORMATION / DISCLAIMER ...................................................... 9 3.1 COUNTERMEASURES TO ACHIEVE COMPLIANCE ......................................................... 9 3.2 OPERATION MODES ................................................................................................ 9 3.3 PHYSICAL CONFIGURATION FOR TESTING ............................................................... 10 3.4 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ............................................... 12 4. TEST RESULTS ..................................................................................................... 13 4.1.1 20dB and 99% Bandwidth .......................................................................................................... 13 4.1.2 Radiated Emissions of Transmitter ............................................................................................ 16 4.1.3 Radiated field strength measurements H-field, 0.009-30 MHz. ..................................................... 18 Test equipment used (for reference see test equipment listing). ............................................................ 18 2 AC POWER LINE CONDUCTED MEASUREMENTS ...............................…

Text truncated - open the document above for the full version.

Prϋfberich - Produkte Test Report - Products Prüfbericht-Nr.: Test Report No.: 20071401.r03 Auftrags-Nr.: Order No.: 89217437 Seite 1 von 17 Page 1 of 17 Kunden-Referenz-Nr.: Client Reference No.: POC-LM-000674 Auftragsdatum: Order date: 2020-08-25 Auftraggeber: Client: Nedap N.V., Parallelweg 2 7141 DC Groenlo, Netherlands Prüfgegenstand: Test item: 134.2 kHz Inductive RFID tag Reader / Motor control Unintentional radiater - Digital Device part Bezeichnung / Typ-Nr.: Identification / Type No.: VP1004B Auftrags-Inhalt: Order content: Compliance with regulatory requirements Prüfgrundlage: Test specification: 47 CFR PART 15 (10-1-19 EDITION), Subpart 15B ICES-003 (Issue 6, January 2016) - Wareneingangsdatum: Date of receipt: 2020-09-23 Prüfmuster-Nr.: Test sample No.: 1229 Prüfzeitraum: Testing period: 2020-10-29 - 2020-11-12 Ort der Prüfung: Place of testing: Leek Prüflaboratorium: Testing laboratory: TÜV Rheinland Nederland B.V. Leek Laboratory Prüfergebnis*: Test result*: Pass geprüft von / tested by: genehmigt von / reviewed & authorized by: Datum /date: 2020-12-21 R. van der Meer, Expert 2020-12-21 T. Koning, Senior Expert Datum Date Name / Stellung Name / Position Unterschrift Signature Datum Date Name / Stellung Name / Position Unterschrift Signature Sonstiges / Other: this report concerns the Unintentional radiater part. Issue date is equal to authorized date. Zustand des Prüfgegenstandes be Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: Legend: 1 = sehr gut P(ass) = entspricht o.g. 1 = very good P(ass) = passed a.m. 2 = gut Prüfgrundlage(n) 2 = good Test specification(s) 3 = befriedigend F(ail) = entspricht nicht o.g. Prüfgrundlage(n) 3 = satisfactory F(ail) a.m. test specification(s) 4 = ausreichend N/A = nicht anwendbar 4 = sufficient N/A = not applicable 5 = mangelhaft N/T/ = nicht getested 5 = poor N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwending eines Prüfzeichens. This test report only relates to the above mentioned testsample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This report does not entitle to carry any test mark TÜV Rheinland Nederland B.V. . Eiberkamp 10 . 9351 VT Leek . Tel: + 31 88 8887888 Mail: [email protected] . Web: www.tuv.com V04 Prϋfberich - Produkte Test Report - Products Liste der verwendenten Prüfmittel List of used test equipment Conformance of the used measurement and test equipment with the requirements of ISO/IEC 17025:2005 has been confirmed before testing. NA= Not Applicable Prüfmittel Kind of Equipment Hersteller / Manufacturer Bezeichnung / Model Name Prüfmittel- Nr. / ID-Nr. Equipment No. / ID-No. Kalibrierung Calibration (mm/yyyy) Nächste Kalibrierung Next calibration (mm/yyyy) For Radiated Emissions Measurement Receiver Rohde & Schwarz ERC7 2790497 08/2020 08/2021 RF Cable S-AR Gigalink APG0500 2789217 03/2020 03/2021 Test facility Comtest FCC listed: 786213 IC: 2932G-2 2789009 03/2020 03/2022 120Vac source EMtest DPA500N 2789197 11/2019 11/2021 Spectrum Analyzer Rohde & Schwarz FSV 2790106 09/2020 09/2021 Antenna mast+control Innco CO3000 9002463 N/A N/A Temperature- Humiditymeter Extech SD500 2789214 07/2020 07/2021 Biconilog Testantenna Teseq CBL 6111D 2789237 08/2020 08/2021 Prüfmittel Kind of Equipment Hersteller / Manufacturer Bezeichnung / Model Name Prüfmittel- Nr. / ID-Nr. Equipment No. / ID-No. Kalibrierung Calibration (mm/yyyy) Nächste Kalibrierung Next calibration (mm/yyyy) For AC Powerline Conducted Emissions Pulse limiter R&S ESH3-Z2 2788823 09/2020 09/2021 120Vac source EMtest DPA500N 2789197 11/2019 11/2021 LISN Rohde & Schwarz ESH2-Z5 2788791 07/2020 07/2021 Measurement Receiver Rohde & Schwarz ESCS30 2789421 10/2020 10/2021 Shielded room for Conducted emissions -- -- 2789207 NA NA Temperature- Humiditymeter Extech SD500 2789211 07/2020 07/2021 Accreditation The reported tests were performed under ISO17025 accreditation, unless otherwise specified as ‘not under Accreditation’. An overview of all TÜV Rheinland Nederland B.V. accreditations, notifications and designations, please visit our website www.tuv.com/nl. You can find the relevant declarations under the download link. 20071401.r03 Page 2 of 16 Prϋfberich - Produkte Test Report - Products 1 Produktdetails Product details 134.2 kHz Inductive RFID tag Reader-Motor control 2 Maße / Gewicht Dimensions / Weight L x W x H = 143 x 120 x 68 mm / ± 430 g 3 Bedienelemente Operating elements None 4 Ausstattung / Zubehör Equipment / Accessories 2x Switch, 1 x Lamp, 5 x Antenna, VP1001, Power Supply VP2002, VPU VP8002, Laptop 5 Verwendete Materialien Used materials None 6 Sonstiges Other none Prufbericht-Nr: 20071401.r03 Test report No: Seite 3 von 17 Page 3 of 17 Produktbeschreibung Product description 20071401.r03 Absatz Clause Anforderungen – Prüfungen / Requirements - Tests 1 47 CFR Part 15 (10-1-19 Edition) - 15.107(a) ICES-003 (Issue 6, January 2016) – Section 6.1 Table 2 AC Power Line Conducted Emissions P F N/A N/T 2 47 CFR Part 15 (10-1-19 Edition) - 15.109 ICES-003 (Issue 6, January 2016) – Section 6.2.1 Table 5 Radiated unwanted emissions P F N/A N/T Testmethods: ANSI C63.4-2014. Revisions Revisions Revision Revision Datum Date Anmerkung Remark Verfasser Author - 2020.12.21 First release R. van der Meer Note: Latest revision report will replace all previous reports Test specification(s): Brand mark: Model: FCC Part 15B, ICES-003 Nedap VP1004B Report number : 20071401.r03 Page 5 of 17 Table of contents 1.1 Tested system details/ disclaimer. ................................................................................................................. 6 1.2 Test methodology. ....................................................................................................…

Text truncated - open the document above for the full version.

Testing and certification of electronic and electric appliances, systems, installations and telecommunication systems TÜV Rheinland Nederland B.V. P.O. Box 37 9350 AA Leek (NL) Eiberkamp 10 9351 VT Leek (NL) Telephone: +31 8888887888 Internet: www.tuv.com E-mail: [email protected] Project number: 20071401.p03b Page 1 of 9 PHOTOGRAPHS OF THE TESTSETUP OF A BRAND NEDAP, MODEL VP1004B Brand mark: Model: Nedap VP1004B Project number: 20071401.p03 Page 2 of 9 Table of contents 1 PHOTOGRAPHS OF THE TEST SETUP. ...................................................................................................................... 3 1.1 RADIATED EMISSIONS. ................................................................................................................................................... 3 1.1.1 Radiated emissions, H-field 0.009 MHz – 30 MHz ......................................................................................... 3 1.1.2 Radiated emissions, E-field 30 MHz – 1000 MHz .......................................................................................... 6 1.2 TABLETOP SETUP H-FIELD ............................................................................................................................................. 7 1.3 TABLE TOP SETUP E-FIELD ............................................................................................................................................ 8 2 AC POWER LINE CONDUCTED EMISSIONS .............................................................................................................. 9 2.1.1 AC power line conducted emissions test setup ............................................................................................... 9 Brand mark: Model: Nedap VP1004B Project number: 20071401.p03 Page 3 of 9 1 Photographs of the test setup. 1.1 Radiated Emissions. 1.1.1 Radiated emissions, H-field 0.009 MHz – 30 MHz Setup EUT @3m Setup EUT @5m Brand mark: Model: Nedap VP1004B Project number: 20071401.p03 Page 4 of 9 Setup EUT @10m (X-orientation shown) Setup EUT @10m (Z-orientation shown) Brand mark: Model: Nedap VP1004B Project number: 20071401.p03 Page 5 of 9 Setup EUT in Semi-AR, @3m Brand mark: Model: Nedap VP1004B Project number: 20071401.p03 Page 6 of 9 1.1.2 Radiated emissions, E-field 30 MHz – 1000 MHz Brand mark: Model: Nedap VP1004B Project number: 20071401.p03 Page 7 of 9 1.2 Tabletop setup H-field Brand mark: Model: Nedap VP1004B Project number: 20071401.p03 Page 8 of 9 1.3 Table top setup E-…

Text truncated - open the document above for the full version.