COMES-53016BTBluetooth Speaker

Operation Manual HY-LTBX-BLK Thank you for purchasing the Hype LED Stereo Box Color-Changing Bluetooth ® Speaker. Please read all instructions carefully before using and retain this manual for future use and reference. PACKAGE CONTENTS • Color-changing Bluetooth ® Speaker • (Optional) 3.5mm Aux Cable • Micro USB Cable • Operation Manual KEY FEATURES • Color flashing LED lights • Compatible with most Bluetooth ® -enabled devices • Lightweight and portable design • Great for travel SAFETY INSTRUCTIONS Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids. Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit. Do not use the unit if it has been dropped or damaged in any way. Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk. Do not puncture or harm the exterior surface of the product in any way. Keep the unit free from dust, lint, etc. Do not use this unit for anything other than its intended use or purpose. Doing so may damage the device. This product is not a toy. Keep out of reach of children. Do not use the unit at excessive levels as this may damage hearing. Do not expose batteries, battery pack, or batteries to installed to excessive heat, such as direct sunlight, or open flame. CHARGING THE SPEAKERS The speaker comes with a built-in rechargeable battery. Before using it for the first time, we recommend you charge the battery fully. Only use the supplied USB cable to charge the speaker. Connect the USB cable to a computer USB port and the USB plug to the charging jack of the headset. The red LED light will illuminate while the speaker is charging. A full charge of the battery takes around 2~3.5 hours. When the battery is fully charged, disconnect the speaker. The speaker will then be ready for use. SPEAKER OPERATION 1. Connect one end of a mini USB cable (included) to your computer or a compatible USB AC/DC Adapter (not included) & the other end of the micro USB cable to the speaker 2. Switch the device to the “On” position. The green power indicator light at the back will come on. 3. Plug the audio jack into the audio playing device. 4. Ensure that your audio device is on. 5. Adjust the volume control on the audio playing device as needed. TURNING SPEAKERS ON/OFF Power On: Switch the power on/off button to the on position. Power Off: Switch the power on/off button to the on position. PAIRING THE SPEAKERS 1. Ensure the speaker is turned off. If it is not, please turn off the speaker first before pairing. 2. Switch the power on/off button to the on position. The LED flashes blue. This will indicate your speaker is now in pairing mode. 3. Place the speaker and the Bluetooth ® device to which you would like to pair it within the operating distance. We recommend keeping the two devices no further than 3 feet apart. 4. Ensure Bluetooth ® is enabled on your phone or music device. Refer to the manufacturer’s instructions for how to enable Bluetooth ® on your device. 5. Once you have activated Bluetooth ® on your device, select the “HY-LTBX-BLK” from the list of available Bluetooth ® devices. 6. If pairing is unsuccessful, turn off the speaker first and repair following the aforementioned steps. Once you have paired the speaker with a device, the earphones will remember this device and will pair automatically when the device’s Bluetooth ® is activated and in range. You do not need to re-pair any previously connected devices. LISTENING TO MUSIC Once the speaker is paired to your device, you can stream music wirelessly to the speaker. Select the track you wish to listen to on your device to listen via speaker. Should you encounter any problems while streaming, please refer to your device’s user manual. BATTERY MAINTENANCE 1. In order to prolong battery life, turn off your speaker. 2. If the speaker is not in use for a long period of time, store it in a dry, safe location. The speaker will need to be charged every 2 months to maintain battery life. CARE AND MAINTENANCE • Do not expose the unit to liquid, moisture, or humidity to avoid damage to the product's internal circuitry. • Do not use abrasive cleaning solvents to clean the unit. • Do not expose the unit to extremely high or low temperatures. • Do not dispose of the unit in fire as it may explode or combust. • Do not expose the unit to contact with sharp objects as this will cause scratches and damage. • Do not let the unit fall from high places, as doing so may damage the internal circuitry. • Do not attempt to disassemble the unit. In the event that the unit does not function properly, return it to the store where it was purchased. SPECIFICATIONS Bluetooth ® : V3.0+EDR Bluetooth ® Protocol: HSP/HFP,OPP,/AVDP/AVRCP,PBAP Bluetooth ® Range Up to 33ft (10m) Play Time: Up to 2 hours Charge Time: 2~3.5 hours Stand-by Current: 40mA Running Current: 200-400mA Max Working Current: 600mA Max Working Voltage: 4.2V Max Audio Power: 1.3W*2 Frequency: 100Hz-18kHz SNR: ≥75dBA Battery Capacity: 500mAh/3.7V Charging Interface: Micro USB 5V (cable included) Input: (Optional) 3.5mm AUX (included) FCC Compliance Statement 21345 DIAGRAM Color-changing Bluetooth® Speaker 3.5mm/AUX Input Bluetooth ® Light Micro USB Port Power Switch Lights Switch Carrying Handle Front Side Back LED Lights Speaker (One on each side) Rechargeable Lithium-ion battery I O OFF/ON LINE INUSB This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How…

Text truncated - open the document above for the full version.

S SHENZHEN AOB ELECTRONICS CO.,LTD Add: Bldg A4, Third Industry Area, Huang Ma Bu Village, Xixiang Town, Bao An District, Shenzhen 518126, China Tel: 0755-27694476 Fax: 0755-27694592 2014-08-20 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: COMES-53016BT We hereby request confidential treatment of information accompanying this application as outlined below: - Schematics Diagram - Block Diagram - Operation description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s name / title : Steven Shen / General Manager Contact information / address : Bldg A4, Third Industry Area, Huang Ma Bu Village, Xixiang Town, Bao An District, Shenzhen 518126, China Tel: 0755-27694476 Fax: 0755-27694592 E-Mail: [email protected]

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 4 EXTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 4 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 4 Fig.5 Fig.6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 4 Fig.7

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 LABEL AND LOCATION Size:L:5cm*W:3cm SHENZHEN AOB ELECTRONICS CO.,LTD Bluetooth Speaker Model No.: ES-53016BT FCC ID: COMES-53016BT Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Label location

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 6 1. INTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 6 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 6 Fig.5 Fig.6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 6 Fig.7 Fig.8 Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 5 of 6 Fig.9 Fig.10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 6 of 6 Fig.11

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 42 FCC TEST REPORT FOR SHENZHEN AOB ELECTRONICS CO.,LTD Bluetooth Speaker Test Model: ES-53016BT Prepared for : SHENZHEN AOB ELECTRONICS CO.,LTD Address : Bldg A4, Third Industry Area, Huang Ma Bu Village, Xixiang Town, Bao An District, Shenzhen 518126, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 1/F., Xingyuan Industrial Park, Tongda Road, Bao'an Avenue, Bao'an District, Shenzhen, Guangdong, China Date of receipt of test sample : August 15, 2014 Number of tested samples : 1 Serial number : Prototype Date of Test : August 15, 2014 - August 22, 2014 Date of Report : August 22, 2014 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 42 FCC TEST REPORT FCC CFR 47 PART 15 C(15.247): 2013 Report Reference No. ............... : LCS1408150668E Date of Issue ................................. : August 22, 2014 Testing Laboratory Name .......... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ......................................... : 1/F., Xingyuan Industrial Park, Tongda Road, Bao'an Avenue, Bao'an District, Shenzhen, Guangdong, China Testing Location/ Procedure ......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ....................... : SHENZHEN AOB ELECTRONICS CO.,LTD Address ......................................... : Bldg A4, Third Industry Area, Huang Ma Bu Village, Xixiang Town, Bao An District, Shenzhen 518126, China Test Specification Standard ........................................ : FCC CFR 47 PART 15 C(15.247): 2013 Test Report Form No. ................... : LCSEMC-1.0 TRF Originator ............................. : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ................ : Bluetooth Speaker Trade Mark ................................... : N/A Model/ Type reference.................. : ES-53016BT Ratings .......................................... : DC 3.7V by battery(500mAh) Result ......................................... : Positive Compiled by: Supervised by: Approved by: Tree Zhan/ File administrators Danny Huang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 42 FCC -- TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS1408150668E August 22, 2014 Date of issue Type / Model........................... : ES-53016BT EUT......................................... : Bluetooth Speaker Applicant............................... : SHENZHEN AOB ELECTRONICS CO.,LTD Address.................................. : Bldg A4, Third Industry Area, Huang Ma Bu Village, Xixiang Town, Bao An District, Shenzhen 518126, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : SHENZHEN AOB ELECTRONICS CO.,LTD Address................................... : Bldg A4, Third Industry Area, Huang Ma Bu Village, Xixiang Town, Bao An District, Shenzhen 518126, China Telephone............................... : / Fax.......................................... : / Factory................................... : SHENZHEN AOB ELECTRONICS CO.,LTD Address................................... : Bldg A4, Third Industry Area, Huang Ma Bu Village, Xixiang Town, Bao An District, Shenzhen 518126, China Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 42 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ...................................................................................................... 5 1.1 Description of Device (EUT) ................................................................................................................. 5 1.2 Support equipment List .......................................................................................................................... 5 1.3 External I/O ........................................................................................................................................... 5 1.4 Description of Test Facility ................................................................................................................... 6 1.5 Statement of The Measurement Uncertainty ......................................................................................... 6 1.6 Measurement Uncertainty ..................................................................…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 2 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement (X Position) Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: COMES-53016BT Report No.: LCS1408150668E _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 2 1.2. Photo of Line Conducted Emissions Measurement