DEO-MT-FOL01Transmitter Assy - Folding Key

Vehicle Name: C210 SSANGYONG MOTOR COMPANY STANDARD SPECIFICATION PAGE : 1 / 11 DEPARTMENT: R&D CENTER STANDARD SPECIFICATION PART NUMBER : MT-C210-0107 TITLE : TRANSMITTER ASSY –Standard Specification -- TABLE OF CONTENTS -- 1. APPLICATION 1.1 SUMMARY 2. ELECTRCAL PERFORMANCE 2.1 GENERAL ELECTRICAL PERFORMANCE OF TRANSMITTER ASS' Y 2.2 WIRELESS CHARACTERISTIC 2.3.1 DOMESTIC (DOM) 2.3.2 GENERAL EXPORT(EXP) 3. FUNCTION 3.1 STRUCTURE OF DATA ( "1", "0" ) 3.2 TRANSMITTER PROTOCOL FORMAT 3.3 BUILDING THE TRANSMITTED CODE WORD (ENCODER) 3.4 BASIC OPERATION OF RECEIVER (DECODER) 3.5 SYNCHRONIZATION WINDOW 3.6 LED FLICKERING PROCEDURE 3.7 RADIO FREQUENCY TRANSMISSION PROCEDURE 3.8 REMOCON FUNCTION OF EACH SIGNAL 3.9 POWER ON INITIALIZATION 4. OPERATING 4.1 REMOTE DOOR LOCK 4.2 REMOTE DOOR UNLOCK 4.3 PANIC FUNCTION 4.4 ESCORT FUNCTION(DOM ONLY) 4.5 ID CODE 4.6 REMOCON RESPONSE OF OPERATING CONTINUOUS SWITCH 5. REVISION LIST 5.1 REVISION SP01 (2013-01-07) 5 4 3. 2. 1 REV.SP01 ORIGINAL RELEASE 1 ~ 11 13.01.07 KIM.H.J MARK EO NUMBER CHANGING LIST PAGE CHAGING DATE WRITER REVISION DATE 2013.01.07 REFERENCE DATA DIVISION WRITER REVIEWER APPROVER POSITION ORIGINAL DATA MANAGEMENT DEPARTMENT APPROVAL SSANGYONG MOTOR COMPANY SPEC NO: ES- PAGE: 2 / 11 STANDARD SPECIFICATION (SHT/SHTS) 1. APPLICATION THIS SPEC APPLIES TO C210 IMMO & BCM Transmitter ASS’Y. BUT, IF CONTENT WHAT IS DIFFERENT THIS SPEC EXIST, CONTENTS OF DRAWING SHEET IS FIRST OF ALL 1.1 SUMMARY WHEN USER CONTROL SWITCH OF TRANSMITTER ASS’Y, DATA FORMAT OF“VEHICLE CONTROL MESSAGE” IS TRANSMITTED TO BCM BY TRANSMITTER’S CPU, AND THEN WHEN BCM RECEIVE THAT MESSAGE, BCM’S CPU CONSIDER TO CONTROL VEHICLE LOCK BUTTON UNLOCK BUTTON PANIC BUTTON RELEASE BUTTON KEY BLADE 열쇠고리 PICTURE 1. Transmitter EACH SWITCH FUNCTIONS IS SAME TO TABLE 1.1 TABLE 1.1 EACH SWITCH FUNCTIONS OF TRANSMITTER FUNCTION SWITCH FUNCTION LOCK BUTTON DOOR LOCK SHORT PRESSING LOCK BUTTON UNDER 0.5s - LED flicker only once as long time ESCORT (DOM ONLY) LONG PRESSING LOCK BUTTON OVER 0.5s - LED flicker twice as short time UNLOCK BUTTON DOOR UNLOCK SHORT PRESSING UNLOCK BUTTON UNDER 0.5s - LED flicker only once as long time PANIC BUTTON PANIC LONG PRESSING PANIC BUTTON OVER 2s - LED flicker twice as short time SSANGYONG MOTOR COMPANY SPEC NO: ES- 페이지: 3 / 11 STANDARD SPECIFICATION (SHT/SHTS) 2. ELECTRICAL PERFORMANCE 2.1 GENERAL ELECTRICAL PERFORMANCE OF TRANSMITTER ASS' Y LIST REQUIREMENTS NOTE RATED VOLTAGE DC 3.0V OPERATING VOLTAGE RANGE DC 2.7V ～ DC 3.3V NORMAL OPERATING FOR OPERATING TEMPERATURE RANGE OPERATING TEMPERATURE RANGE -10°C ～ +60°C STORED TEMPERATURE RANGE -20°C ～ +70°C INSULATION RESISTANCE IT DOESN’T EXISTED FEBRILITY OR IGNITION BY LEAKAGE CURRENT PCB MOISTUREPROOFING AND COATING DEFINE WITH INSULATION REQUIRED ELECTRONIC COMPONENTS USING DATE USING ONE DAY PER 10 TIMES, OVER 2 YEARS DARK CURRENT UNDER 1uA 2.2 WIRELESS CHARACTERISTIC 2.3.1 DOMESTIC (DOM) (1) TRANSMIT FREQUENCY: 433.92MHZ ± 10KHZ(@ ROOM TEMPERATURE) (2) CLEAR FREQUENCY BAND WIDTH: 13kHz ± 5kHz (3) OUTPUT: 3.981 mW UNDER (6dBm) (4) MODULATION METHOD: FM MODULATION (5) COMMUNICATION METHOD: HALF DUPLEX METHOD 2.3.2 GENERAL EXPORT (EXP) (1) TRANSMIT FREQUENCY: 433.92MHZ ± 10KHZ(@ ROOM TEMPERATURE) (2) CLEAR FREQUENCY BAND WIDTH: 13kHz ± 5kHz (3) OUTPUT: 3.981 mW UNDER (6dBm) (4) MODULATION METHOD: FM MODULATION (5) COMMUNICATION METHOD: HALF DUPLEX METHOD SSANGYONG MOTOR COMPANY SPEC NO: ES- 페이지: 4 / 11 STANDARD SPECIFICATION (SHT/SHTS) 3. FUNCTION 3.1 STRUCTURE OF DATA (“1", "0”) 3.2 TRANSMITTER PROTOCOL FORMAT (1) 송신부의 1회 DATA 전송횟수는 10FRAME으로 구성된다. (1) ONE TIME TRANSMITTING DATA CONSIST OF 10 FRAMES (2) 각 FRAME간 전송 간격은 6.8 ± 1ms로 한다. (2) EACH FRAME DATA THANSMISSION INTERVAL IS 6.8 ± 1ms (3) 모든 0과 1의 BIT 형태는 PULSE 형태로 구별한다. (3) ALL OF BIT (0 AND 1) DIFFERENTIATE THE PULSE FORM (4) CODE WORD TRANSMISSION SEQUENCE (73.6msec) (5) TRANSMISSION FORMAT (MANCHESTER) SSANGYONG MOTOR COMPANY SPEC NO: ES- 페이지: 5 / 11 STANDARD SPECIFICATION (SHT/SHTS) (6) CODE WORD TRANSMISSION DATA FORMAT (7) RF Data Format (756msec) ①
Preamble: 16BIT CONSIST OF “0” ② Header: CONSIST OF Low Level FOR 4TE(Timing Element) ③ Start Bit: 1Bit CONSIST OF “1” ④ Encrypted Portion: CONSIST OF 32Bit (TABLE 3-1) ⑤ Fixed Code Portion: CONSIST OF 32Bit (TABEL 3-2) TABLE 3-1 Encrypted Portion Information Bit Address Field Description Values 0 ～ 15 Count Synchronization Counter Synchronization Counter Value 16 ～ 17 BSEL_0, BSEL_1 Bit rate select 00- TE= 100 us 01- TE= 200 us 10- TE= 400 us * 11- TE= 800 us 18 ～ 19 MTX_0, MTX_1 Minimum number of code words 00- 1 01- 4 10- 10 * 11- 16 20 ～ 21 GUARD_0, GUARD_1 Guard time select 00- 0 ms (1 TE) 01- 6.8 ms + 2 TE * 10- 25.6 ms + 2 TE 11- 76.8 ms + 2 TE 22 MOD Modulation Format 0 = PWM 1 = MANCHESTER * 23 HEADER Header Length 0 = Short Header, TH = 4 x TE * 1 = Standard Header, TH = 10 x TE 24 ～ 27 Not Used 28 ～ 31 S3, S0, S1, S2 Button Status S3, S2, S1, S0 0 0 0 1 = DOOR LOCK 0 0 1 0 = DOOR UNLOCK 0 0 1 1 = PANIC 0 1 0 0 = ESCORT SSANGYONG MOTOR COMPANY SPEC NO: ES- 페이지: 6 / 11 STANDARD SPECIFICATION (SHT/SHTS) TABLE 3-2 Fixed Portion Information Bit Address Field Description Values 32 ～ 55 ID0 ~ ID23 Serial Number 56 ～ 59 0 0 1 0 60 ～ 63 S3, S0, S1, S2 Button Status S3, S2, S1, S0 0 0 0 1 = DOOR LOCK 0 0 1 0 = DOOR UNLOCK 0 0 1 1 = PANIC 0 1 0 0 = ESCORT 3.3 BUILDING THE TRANSMITTED CODE WORD (ENCODER) 3.4 BASIC OPERATION OF RECEIVER (DECODER) 3.5 SYNCHRONIZATION WINDOW SSANGYONG MOTOR COMPANY SPEC NO: ES- 페이지: 7 / 11 STANDARD SPECIFICATION (SHT/SHTS) 3.6 LED FLICKERING PROCEDURE LED FLICKERING PERFORM ON/OFF PROCEDURE TABLE 3-3 LED TURNED THE LIGHT ON TIME BY EACH FUNCTION 3.7 RADIO FREQUENCY TRANSMISSION PROCEDURE TABLE 3-4 TX TRANSMISSION FLOW CHART START 스위치분석 스위치입력 OK TX POWER = 1(ON) LED = ON TX DATA 출력(2.5Kbit/s) LED = OFF TX POWER = 0(OFF) END NO(NOISE ...) YES SSANGYONG MOTOR COMPANY SPEC NO: ES- 페이지: 8 / 11 STANDARD SPECIFICATION (SHT/SHTS) 3.8 REMOCON FUNCTION OF EACH SIGNAL TABL…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 3 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (current) 3.0 4.0 May-23-2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 3 Rev 4.0 Sep. 29, 2014 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, MOTOTECH Co., Ltd. hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): (Transmitter Assy - Folding Key, MT FOL 01 , FCC ID: DEO-MT-FOL01) Sincerely, Ban-seok Choi Research Engineer MOTOTECH Co., Ltd. #68-26, Mannyeon-ro, Jeongnam-myeon, Hwasong-si, Gyeonggi-do, Korea

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 3.0 Sep. 29, 2014 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: DEO-MT-FOL01 We hereby request confidential treatment of information accompanying this application as outlined below: - e.g. Block Diagram - e.g. Schematics - e.g. Operational Description - e.g. Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : Ban-seok Choi / Research Engineer Contact information / address: 031-305-0682 / #68-26, Mannyeon-ro, Jeongnam-myeon, Hwaseong-si, Gyeonggi-do, Korea SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 3.0 Sep. 29, 2014 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: DEO-MT-FOL01 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days (please check one). - e.g. User Manual - e.g. Ext Photo - e.g. Int Photo - e.g. Test Photo The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Client’s signature : Client’s name / title : Ban-seok Choi / Research Engineer Contact information / address: 031-305-0682 / #68-26, Mannyeon-ro, Jeongnam-myeon, Hwaseong-si, Gyeonggi-do, Korea

MOTOTECH Co., Ltd. #68-26, Mannyeon-ro, Jeongnam-myeon, Hwaseong-si, Gyeonggi-do, Korea Date: Sep. 29, 2014 SIEMIC 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Letter of Authorization We, the undersigned, hereby authorize Harvey Sung of DT&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCCID: DEO- MT-FOL01 including signing of all documents relating to these matters. Any and all acts carried out by Harvey Sung of DT&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from MOTOTECH Co., Ltd. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Ban-seok Choi Research Engineer

FCCID: DEO-MT-FOL01 Copyright Ⓒ 2014, DT&C Co., Ltd. Page 1 / 3 View 1 FCCID: DEO-MT-FOL01 Copyright Ⓒ 2014, DT&C Co., Ltd. Page 2 / 3 View 2 FCCID: DEO-MT-FOL01 Copyright Ⓒ 2014, DT&C Co., Ltd. Page 3 / 3 View 3

FCC ID: DEO-MT-FOL01 Copyright Ⓒ 2014, DT&C Co., Ltd. FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §2.925 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase - The FCC label shown is representative of the label that will appear on the radio when in production. Other information may also be included on this label. - The device is so small that it is not practicable to place the statement specified under 15.19 statement request, the information required by this paragraph shall be placed in a prominent location in the user's manual. TRANSMITTER ASSY-FOLDING KEY MODEL : MT FOL 01 FCC ID : DEO-MT-FOL01 LOT NO MOTOTECH Co., Ltd. Made in Korea REAR OF EUT

FCCID: DEO-MT-FOL01 Copyright Ⓒ 2014, DT&C Co., Ltd. Page 1 / 2 View 1 FCCID: DEO-MT-FOL01 Copyright Ⓒ 2014, DT&C Co., Ltd. Page 2 / 2 View 2

DEMC1408-03281 DRTFCC1409-1246 TRF-RF-218(00)120326 Page 2 / 15 Copyright ○ C 2014, DT&C Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1409-1246 Sep. 29, 2014 Initial issue DEMC1408-03281 DRTFCC1409-1246 TRF-RF-218(00)120326 Page 3 / 15 Copyright ○ C 2014, DT&C Co., Ltd. CONTENTS 1. Equipment information ............................................................. 4 1.1 Equipment description ............................................................ 4 1.2 Ancillary equipment ................................................................ 4 2. Information about test items .................................................... 5 2.1 Operating mode ..................................................................... 5 2.2 Tested frequency .................................................................... 5 2.3 Auxiliary equipment ................................................................ 5 2.4 Tested environment ................................................................ 5 2.5 EMI Suppression Device(s)/Modifications .............................. 5 3. Test Report ................................................................................ 6 3.1 Summary of tests ................................................................... 6 3.2 Transmitter requirements........................................................ 7 3.2.1 20dB bandwidth ................................................................. 7 3.2.2 Field strength of fundamental and spurious emissions ....... 8 3.2.3 Automatically deactivate ................................................... 10 3.2.4 Duty Cycle Correction Factor ............................................ 11 3.2.5 AC power line conducted emission................................... 12 3.2.6 Antenna requirement ........................................................ 13 APPENDIX I ................................................................................. 14 DEMC1408-03281 DRTFCC1409-1246 TRF-RF-218(00)120326 Page 4 / 15 Copyright ○ C 2014, DT&C Co., Ltd. 1. Equipment information 1.1 Equipment description FCC Equipment Class Part 15 Low Power Transmitter Equipment type Transmitter Assy - Folding Key Fundamental Frequency 433.92 MHz Equipment model name MT FOL 01 Modulation FSK Equipment serial no. Identical prototype Power DC 3 V(Battery) Antenna type Pattern Antenna 1.2 Ancillary equipment Equipment Model No. Serial No. Manufacturer Note - - - - - - - - - - DEMC1408-03281 DRTFCC1409-1246 TRF-RF-218(00)120326 Page 5 / 15 Copyright ○ C 2014, DT&C Co., Ltd. 2. Information about test items 2.1 Operating mode Operating Mode 1 This device was tested with continuous TX mode for field strength of fundamental and spurious emissions measurements. Operating Mode 2 Normal operating mode was used for 20 dB BW and less than 5 second requirements. 2.2 Tested frequency Mode Frequency(MHz) Transmitting mode 433.92 - - - - 2.3 Auxiliary equipment Equipment Model No. Serial No. Manufacturer Note - - - -. - 2.4 Tested environment Temperature : 23 ~ 24 o C Relative humidity content : 42 ~ 52 % R.H. Details of power supply : DC 3 V(Battery) 2.5 EMI Suppression Device(s)/Modifications EMI suppression device(s) added and/or modifications made during testing → None DEMC1408-03281 DRTFCC1409-1246 TRF-RF-218(00)120326 Page 6 / 15 Copyright ○ C 2014, DT&C Co., Ltd. 3. Test Report 3.1 Summary of tests FCC Part Section(s) Parameter Test Condition Status Note 1 I. Test Items 15.205 Restricted bands of operation Radiated C 15.209 Radiated emission limits, general requirements C 15.231(a) Automatically deactivate C 15.231(b) Field strength of fundamental and spurious emissions C 15.231(c) 20dB bandwidth C 15.207 AC Power Line Conducted Emission AC Line Conducted NA Note 2 15.203 Antenna Requirements - C Note 1: C=Comply NC=Not Comply NT=Not Tested NA=Not Applicable Note 2: This device is used Battery for power supplying. Therefore this test item was not performed. The sample was tested according to the following specification: ANSI C-63.4-2009 DEMC1408-03281 DRTFCC1409-1246 TRF-RF-218(00)120326 Page 7 / 15 Copyright ○ C 2014, DT&C Co., Ltd. 3.2 Transmitter requirements 3.2.1 20dB bandwidth - Procedure: The Transmitter output is connected to the spectrum analyzer. 20dB Bandwidth: The RBW is set to 3 kHz. The VBW is set to 9.1 kHz. The sweep time is coupled. Bandwidth is determined at the points 20 dB down from the modulated carrier. - Measurement Data: Comply Frequency (MHz) 20dB Bandwidth (kHz) Limit (kHz) 433.92 24.050 1084.8 - Limit: § 15.209(c) The bandwidth of the emission shall be no wider than 0.25% of the center frequency for devices operating above 70 MHz and below 900 MHz. For devices operating above 900 MHz, the emission shall be no wider than 0.5% of the center frequency. Bandwidth is determined at the points 20 dB down from the modulated carrier. DEMC1408-03281 DRTFCC1409-1246 TRF-RF-218(00)120326 Page 8 / 15 Copyright ○ C 2014, DT&C Co., Ltd. 3.2.2 Field strength of fundamental and spurious emissions - Procedure: 1. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic chamber test site. The table was rotated 360 degrees to determine the position of the highest radiation. 2. During performing radiated emission below 1 ㎓, the EUT was set 3 meters away from the interference receiving antenna, which was mounted on the top of a variable-height antenna tower. During performing radiated emission above 1 ㎓, the EUT was set 3 meter away from the interference-receiving antenna. 3. The antenna is a broadband antenna, and its height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. 4. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the table was turned from …

Text truncated - open the document above for the full version.

FCC ID: DEO-MT-FOL01 Copyright Ⓒ 2014, DT&C Co., Ltd. Test Setup photographs EUT Position: X-axis EUT Position: Y-axis EUT Position: Z-axis FCC ID: DEO-MT-FOL01 Copyright Ⓒ 2014, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (0.009 ~ 30MHz) FCC ID: DEO-MT-FOL01 Copyright Ⓒ 2014, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (below 1000MHz) FCC ID: DEO-MT-FOL01 Copyright Ⓒ 2014, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (Above 1GHz)