DMOCBSSHFBluetooth Headset

MB Pro 1 | MB Pro 2 | BTD 800 USB | CH 20 MB USB | CH 20 MB In compliance with: MB Pro 1MB Pro 2BTD 800 USB CH 20 MB | CH 20 MB USB USA FCC ID: DMOCBSSHFFCC ID: DMOCBSSHFFCC ID: DMOCBBSKE Canada IC: 2099A-MBHSIC: 2099A-MBHSIC: 2099D-BTD800 Europe Australia/ New Zealand Singapore Korea MSIP-CRM-SC9-MBPROMSIP-CRM-SC9-MBPRO KCC-CRM-SC9-BTD800 MSIP-CRM-SC9-CH20MB 사용자 정보: 해당 무선설비는 운용 중 전파혼신 가능성이 있음 해당 무선설비는 전 혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음 안전인증 (Certification No) MSIP-CRM-SC9-MBPROKCC-CRM-SC9-BTD800MSIP-CRM-SC9-CH20MB 품명 (Product name) Bluetooth headset (MB Pro 1)/(MB Pro 2) Bluetooth dongleHeadset charger 모델명 (Model) MB Pro 1/ MB Pro 2BTD 800 USBCH 20 MB USB 신청인 (Applicant) Sennheiser Communications A/S 제조자 (Manufacturer) Sennheiser Comunications A/S 제조국 (Country of Origin) 중국 (China) 제조년월 (Manufacturing date) 별도표기 MB Pro 1MB Pro 2BTD 800 USB CH 20 MB | CH 20 MB USB Taiwan CCAI12LP3060T5 Japan R 201-125772 China CMIIT ID: 2013DJ5588 Sennheiser Communications A/S Industriparken 27, DK-2750 Ballerup, Denmark, www.sennheiser.com, Printed in China, 10/13, A01 EN This device complies with Part 15 subpart b of the FCC rules. Operation is subjected to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, includ- ing interference that may cause undesired operation. FCC User Information: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device of the FCC Rules, pursuant to part 15 of the FCC Rules. These limits are de- signed to provide reasonable protection against harmful in- terference in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm- ful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications made to this equipment not ex- pressly approved by Sennheiser electronic Corp. may void FCC authorization to operate this equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including inter- ference that may cause undesired operation of the device. RF Radiation Exposure Information Since the radiated output power of this device is far below the FCC radio frequency exposure limits, it is not subjected to routine RF exposure evaluation as per Section 2.1093 of the FCC rules. This device complies with the US and Industry Canada portable device RF exposure limits set forth for an un- controlled environment and is safe for intended operation as described in the user manual. FR Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploi- tation est autorisée aux deux conditions suivantes : (1) l’ap- pareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Information sur l‘exposition aux radiofréquencesn La puissance RF rayonnée de cet appareil étant de loin infé- rieure aux limites imposées par la FCC, il n’est pas soumis à la réglementation sur l’exposition aux RF selon la section 2.1093 de la réglementation FCC. Cet appareil portatif est conforme aux limites d‘exposition aux radiofréquences de la FCC et d‘Industrie Canada, définies pour un environnement non-contrôlé et il ne présente aucun danger au regard de son utilisation prévue décrite dans la notice d‘emploi. MB Pro 1 | MB Pro 2 | BTD 800 USB | CH 20 MB USB | CH 20 MB Statements regarding FCC and Industry Canada/ Déclaration requise par la FCC et l’Industrie Canada SENNHEISER Model No: FCC Declaration of Conformity (DoC) We, Sennheiser Electronic Corporation One Enterprise Drive • Old Lyme • CT 06371 • USA Tel: +1 (860) 434 9190, ext. 144 Fax: +1 (860) 434 1759 declare the above device comply with the requirements of Federal Communications Commission. This device complies with Part 15 subpart b of the FCC rules. Operation is subjected to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation. Responsible Party:Greg Beebe BTD 800 USB | CH 20 MB USB | CH 20 MB

Professional Bluetooth solutions MB Pro 1 MB Pro 2 Instruction manual MB Pro1 | MB Pro 2 | 1 Contents Contents Important safety information ...................................................................................2 Introduction..................................................................................................................3 Package contents and overview ................................................................................4 Product overview .........................................................................................................5 Overview of headsets ................................................................................................. 5 Overview of the BTD 800 USB dongle | Charger CH 20 ........................................ 6 Overview of pictograms ............................................................................................. 6 Overview of the LED indications ............................................................................... 7 Overview of buttons ................................................................................................... 8 Putting the headset into operation ....................................................................... 10 Charging the headset battery .................................................................................10 Pairing the headset with Bluetooth devices ........................................................11 Using the headset..................................................................................................... 13 Individually adjusting the headset and wearing it .............................................13 Switching the headset on and connecting it .......................................................14 Switching the headset off .......................................................................................15 Retrieving information on the remaining talk time ...........................................15 Changing the volume ................................................................................................16 Making calls using the headset .............................................................................18 Managing multiple calls ...........................................................................................20 Cleaning and maintaining the headset ................................................................. 21 Cleaning the headset and the headset charger ..................................................21 Replacing the ear pads .............................................................................................21 Replacing the headset’s rechargeable battery ....................................................22 Storing the headset ..................................................................................................23 If a problem occurs ... ............................................................................................... 24 Updating the firmware .............................................................................................25 Restoring factory default settings (Reset) .........................................................25 If you are out of the Bluetooth transmission range ...........................................26 Specifications ............................................................................................................ 27 Manufacturer Declarations ..................................................................................... 28 2 | MB Pro1 | MB Pro 2 Important safety information Important safety information
Please read this instruction manual carefully and com- pletely before using the product.
Always include this instruction manual when passing the product on to third parties.
Do not use an obviously defective product. Preventing damage to health and accidents
Do not listen at high volume levels for long periods of time to prevent hearing damage.
Always maintain a distance of at least 3.94” (10 cm) between the ear cups and the cardiac pacemaker or implanted defibrillator since the product generates permanent magnetic fields.
Keep the product, accessories and packaging parts out of reach of children and pets to prevent accidents and choking hazards.
Do not use the product in situations which require spe- cial attention. Preventing damage to the product and malfunctions
Always keep the product dry and do not expose it to extreme temperatures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or deformation.
Only use attachments/accessories supplied or recom- mended by Sennheiser.
Only clean the product with a soft, dry cloth.
Only use the product in environments where wireless Bluetooth® transmission is permitted. Intended use/Liability The headsets are accessoies for mobile phones, soft- phones and any other Bluetooth compliant device with a “hands free profile” (HFP), a “headset profile” (HSP) or an “advanced audio distribution profile” (A2DP). They are intended for wireless communication via Bluetooth connection. It is considered improper use when this product is used for any application not named in this instruction manual. Sennheiser does not accept liability for damage arising from abuse or misuse of this product and its attach- ments/accessories. The risk is to be borne by the user. Sennheiser is not liable for damages to USB devices that are not consistent with the USB specifications. Sennheiser is not liable for damages resulting from the loss of connection due to flat or overaged rechargeable batteries or exceeding the Bluetooth transmission range. Safety instructions for standard/rechargeable batteries WARNING In extreme cases, abuse or misuse of standard/recharge- able batteries can lead to: • explosion, • fire development, • heat generation or • smoke or gas development. Switch rechargeable battery-powered products off after use. Only charge …

Text truncated - open the document above for the full version.

Date: 2013-10-30 AUTHORIZATION LETTER FCC ID: DMOCBSSHF To whom it may concern: We, the undersigned Sennheiser Electronic Corp (NY) hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC and any communication needed with the national authority. Any and all acts carried out by BV CPS Taoyuan on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ------------------------------------ Edina Mujan Regulatory Compliance Manager

We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C.862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Authorization Letter Date: October 22, 2013 To whom it may concern: We hereby authorize our Regulatory Compliance Manager Ms. Edina Mujan to sign on behalf of our company Sennheiser Electronic Corporation., in the following matters related to the Product Type Approval and Certification of our products to FCC: - Application forms and Report submittal - Related correspondence - Signing of all documents relating to the above matters and - Any other lawful activity necessary to obtain such certification This authorization is limited to the product type approval and certification matters for one year from the date of issue or until rescinded in writing. If you have any questions regarding the authorization, please don’t hesitate to contact the undersigned. Sincerely yours, Name: Greg Beebe Title: President - SEC Tel: +1 860 434 9190 Fax: +1 860 434 1759 e-mail: [email protected]

Sennheiser Communications A/S · Industriparken 27 , Ballerup , 2750 Denmark Sennheiser electronic GmbH & Co. KG · Sitz 30900 Wedemark, Amtsgericht Hannover HRA 120100 phG: Sennheiser Beteiligungsgesellschaft mbH · Sitz 30900 Wedemark, Amtsgericht Hannover HRB 120179 Geschäftsführer Volker Bartels, Dr. Heinrich Esser, Stefan Junker · Vorsitzender des Aufsichtsrates Prof. Dr. sc. techn. Jörg Sennheiser Sennheiser Communications A/S Industriparken 27 DK-2750 ,Ballerup Denmark Tel: +45 5618 0000 Fax: +45 5618 0099 CVR No: 19228746 www.sennheiser.com December 2013 To Whom It May Concern: We hereby confirm that the RSS 102 wording will be added in the final version of the Safety guide followed by the products in the product packaging . By this declaration we are ensuring that this will be delivered during the mass production. Now : Since the radiated output power of this device is far below the FCC radio frequency exposure limits. it is not subje cted to routine RF exposure evaluation as per Section 2.1093 of the FCC rules . This device complies with the US and Industry Canada portable device RF exposure limits set forth for an uncontrolled environmental and is safe for intended operation as describe in the user manual . Translate above in Franch : Future: Since the radiated output power of this device is far below the FCC/Canada radio frequency exposure limits. it is not subjected to routine RF exposure evaluation as per Section 2.1093 of the FCC rules and RSS-102. This device complies with the US and Industry Canada portable device RF exposure limits set forth for an uncontrolled environmental and is safe for intended operation as describe in the user manual . Translate above in Franch : Please feel free to contact me if you have any questions or comments. Best regards Edina Mujan Regulatory Compliance Manger Sennheiser Communications A/S

Page 1 CONSTRUCTION PHOTOS OF EUT Model: MB Pro 1 Page 2 Page 3 Model: MB Pro 2 Page 4 Page 5 Page 6

Preston/ MB Pro 1_MB Pro2 _ labelsSennheiser Communications A/S Date :17-10-2013 Japan _Taiwan_Label Approval number overview MB Pro 1 MB Pro 2 ?? ?? ?? ?? 2 | 17 October 2013 25mm 25mm 25mm 40mm 105mm 25mm 3 | 17 October 2013 If we can’t get family numbers, this label have to be made in 2 versions.MB Pro 1MB Pro 2If we can’t get these numbers for PP build we need this label to be p re p rented b y Vtech and pp y the Secom will place the label in DK if needed. 4 | 17 October 2013 MB Pro 1 // Certificate numbers & logos position ‐ EU ,USA, Canada 5 | 17 October 2013 10.5mm 25mm 6 | 17 October 2013 MB Pro 1 // Certificate numbers & logos position 7 | 17 October 2013 MB Pro 1 // Certificate numbers & logos position ‐ Taiwan , Japan 8 | 17 October 2013 MB Pro 2 // Certificate numbers & logos position ‐ EU ,USA, Canada 9 | 17 October 2013 File version name:0113-MB Pro 2 name label ver1 10.5mm 25mm 10 | 17 October 2013 MB Pro 2 // Certificate numbers & logos position ‐ EU ,USA, Canada 11 | 17 October 2013 MB Pro 2 // Certificate numbers & logos position ‐ Taiwan , Japan 12 | 17 October 2013

Page 7 Model: MB Pro 1 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Model: MB Pro 2 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20

FCC ID: DMOCBSSHF Report No.: RF131008C18 OPERATIONAL DESCRIPTION The transmitter of the EUT (Bluetooth Headset) is powered from 5Vdc from host equipment. The antenna is PCB antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA131008C18 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA131008C18 MODEL NO.: MB Pro 1, MB Pro 2 FCC ID: DMOCBSSHF RECEIVED: Sep. 02, 2013 TESTED: Sep. 02 ~ Nov. 14, 2013 ISSUED: Nov. 15, 2013 APPLICANT: Sennheiser Electronic Corp (NY) ADDRESS: 1 Enterprise Drive Old Lyme, Conneticut 06371 United States ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA131008C18 2 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION .............................................................................................. 4 2. EVALUATION RESULT .................................................................................... 5 3. SAR TEST EXCLUSION THRESHOLDS ......................................................... 6 4. CONCLUSION .................................................................................................. 6 Report No.: SA131008C18 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA131008C18 Original release Nov. 15, 2013 Report No.: SA131008C18 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Bluetooth Headset MODEL: MB Pro 1, MB Pro 2 BRAND: SENNHEISER APPLICANT: Sennheiser Electronic Corp (NY) TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (model: MB Pro 1, MB Pro 2) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Nov. 15, 2013 Pettie Chen / Senior Specialist APPROVED BY : , DATE : Nov. 15, 2013 Ken Liu / Senior Manager Report No.: SA131008C18 5 of 6 Report Format Version 5.0.0 2. EVALUATION RESULT Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where  f(GHz) is the RF channel transmit frequency in GHz .  Power and distance are rounded to the nearest mW and mm before calculation.  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Report No.: SA131008C18 6 of 6 Report Format Version 5.0.0 3. SAR TEST EXCLUSION THRESHOLDS Maximum measured transmitter power: Mode Max. Power (mW) Min. test separation distance (mm) SAR test exclusion calculation value (NOTE 2) 1-g SAR test exclusion thresholds Result BT EDR 9.550 5 2.96 3 Pass BT LE 9.204 5 2.85 3 Pass NOTE: 1. The antenna type is PCB antenna with 0.29dBi gain. 2. Calculate SAR test exclusion thresholds from condition “1” formulas. 4. CONCLUSION Since Source-base time average power is below…

Text truncated - open the document above for the full version.

Report No.: RF131008C18 1 of 91 Report Format Version 5.0.0 FCC TEST REPORT (BLUETOOTH) REPORT NO.: RF131008C18 MODEL NO.: MB Pro 1, MB Pro 2 (Refer to item 3.1 for more detail) FCC ID: DMOCBSSHF RECEIVED: Sep. 02, 2013 TESTED: Sep. 02 ~ Dec. 04, 2013 ISSUED: Dec. 05, 2013 APPLICANT: Sennheiser Electronic Corp (NY) ADDRESS: 1 Enterprise Drive Old Lyme, Conneticut 06371 United States ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF131008C18 2 of 91 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .......................................................................................... 5 1. CERTIFICATION ....................................................................................................... 6 2. SUMMARY OF TEST RESULTS .............................................................................. 7 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 8 3. GENERAL INFORMATION ....................................................................................... 9 3.1 GENERAL DESCRIPTION OF EUT ......................................................................... 9 3.2 DESCRIPTION OF TEST MODES ......................................................................... 11 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................... 12 3.3 DESCRIPTION OF SUPPORT UNITS ................................................................... 15 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 16 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 17 4. TEST TYPES AND RESULTS (FOR BLUETOOTH EDR) ...................................... 18 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................. 18 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 18 4.1.2 TEST INSTRUMENTS ........................................................................................... 19 4.1.3 TEST PROCEDURES ............................................................................................ 20 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 20 4.1.5 TEST SETUP ......................................................................................................... 21 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 21 4.1.7 TEST RESULTS ..................................................................................................... 22 4.2 CONDUCTED EMISSION MEASUREMENT ......................................................... 35 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................... 35 4.2.2 TEST INSTRUMENTS ........................................................................................... 35 4.2.3 TEST PROCEDURES ............................................................................................ 36 4.2.4 DEVIATION FROM TEST STANDARD .................................................................. 36 4.2.5 TEST SETUP ......................................................................................................... 37 4.2.6 EUT OPERATING CONDITIONS ........................................................................... 37 4.2.7 TEST RESULTS ..................................................................................................... 38 4.3 NUMBER OF HOPPING FREQUENCY USED ...................................................... 46 4.3.1 LIMIT OF HOPPING FREQUENCY USED ............................................................ 46 4.3.2 TEST SETUP ......................................................................................................... 46 4.3.3 TEST INSTRUMENTS ........................................................................................... 46 4.3.4 TEST PROCEDURES ............................................................................................ 46 4.3.5 DEVIATION FROM TEST STANDARD .................................................................. 46 4.3.6 TEST RESULTS ..................................................................................................... 46 4.4 DWELL TIME ON EACH CHANNEL ..........................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (Test Mode B) 2 CONDUCTED EMISSION TEST (Test Mode C) 3 CONDUCTED EMISSION TEST (Test Mode D) 4 CONDUCTED EMISSION TEST (Test Mode E) 5 RADIATED EMISSION TEST (Test Mode A) 6 RADIATED EMISSION TEST (Test Mode B) 7 RADIATED EMISSION TEST (Test Mode C) 8 RADIATED EMISSION TEST (Test Mode D) 9 RADIATED EMISSION TEST (Test Mode E) 10 RADIATED EMISSION TEST (Test Mode F) 11 RADIATED EMISSION TEST (Test Mode G)