DMORS220HDigital Wireless Headphone System

Instruction manual RS 220 Digital wireless system RS 220 | 1 Contents Contents Important safety information ........................................................................... 2 The RS 220 digital RF headphone system ...................................................... 4 Delivery includes .................................................................................................. 5 Product overview ................................................................................................. 6 Overview of the headphones ...................................................................... 6 Overview of the transmitter ........................................................................ 7 Overview of the transmitter’s connections .............................................. 7 Overview of the indicators ........................................................................... 8 Putting the RS 220 into operation ................................................................... 9 Setting up the transmitter ........................................................................... 9 Connecting the transmitter to audio sources ........................................ 10 Connecting the transmitter to the mains ............................................... 14 Charging the rechargeable batteries inside the headphones ............. 14 Adjusting the headband of the headphones ......................................... 15 Using the RS 220 ............................................................................................... 16 Switching the transmitter on/off ............................................................. 16 Switching the headphones on/off ........................................................... 19 Selecting an audio source or toggling between audio sources .......... 21 Adjusting the volume on the headphones ............................................. 23 Adjusting the balance ................................................................................. 23 Associating a second pair of headphones to the transmitter ............ 24 Cleaning and maintaining the RS 220 ........................................................... 25 Changing the rechargeable batteries of the headphones ................... 25 Replacing the ear pads ............................................................................... 26 If a problem occurs ... ........................................................................................ 27 Specifications ...................................................................................................... 29 Manufacturer declarations ............................................................................... 30 Important safety information 2 | RS 220 Important safety information Please read this instruction manual carefully and completely before using the product. Make this instruction manual easily accessible to all users at all times. Always include this instruction manual when passing the product on to third parties. This instruction manual is also available on the Internet at www.sennheiser.com. Preventing health problems Before using the product, set the volume to a low level. To protect your hearing, avoid listening at high volume levels for long periods of time. Do not use the product in situations which require special attention (e.g. in traffic or when performing skilled jobs). The product generates stronger permanent magnetic fields that could cause interference with cardiac pacemakers and implanted defibrillators (ICDs). Always maintain a distance of at least 3.94” (10 cm) between the ear piece housing and the cardiac pacemaker or implanted defibrillator. Preventing damage to the product Always keep the product dry and do not expose it to extreme temper- atures (normal operating temperatures: 5°C/41°F to 40°C/104°F). Use the product with care and store it in a clean, dust-free environ- ment. Varnish or furniture polish may degrade the feet of the trans- mitter, which could stain your furniture. You should therefore place the transmitter on a non-slip pad to avoid potential staining of furniture. Switch the headphones off after use to conserve battery power. Remove the batteries if the headphones will not be used for extended periods of time. Preventing damage to the power supply unit To reduce the risk of fire or electric shock, do not expose the product to rain or moisture. Unplug the mains unit from the wall socket to completely disconnect the product from the mains, during lightning storms or when unused for long periods of time. Only operate the mains unit from the type of power source specified in the chapter “Specifications”. To prevent heat accumulation, always ensure that the mains unit is in a safe operating condition and easily accessible, properly plugged into the wall socket and not covered or exposed to direct sunlight for longer periods of time. Only use the power supply units, charging cables and accessories recommended by Sennheiser. An overview can be found on www.sennheiser.com. www.sennheiser.com www RS 220 Manual Important safety information RS 220 | 3 Intended use Intended use of the product includes •having read this instruction manual, especially the chapter “Important safety information”, •using the product within the operating conditions and limitations described in this instruction manual. “Improper use” means using the product other than as described in this instruction manual, or under operating conditions which differ from those described herein. Safety instructions for the NiMH rechargeable batteries If abused or misused, the rechargeable batteries may leak. In extreme cases, they may even present Please understand that Sennheiser does not accept liability for damage arising from abuse or misuse. •a heat hazard, •a fire hazard, •an explosion hazard, •a smoke or gas hazard. Keep away from children. Only charge the rechargeable batteries in the head…

Text truncated - open the document above for the full version.

FCC ID: DMORS220H

Page 1 CONSTRUCTION PHOTOS OF EUT

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10

FCC ID: DMORS220H Report No.: RF110113C04 OPERATIONAL DESCRIPTION The transmitter of the EUT (Digital Wireless Headphone-HDR 220) is powered from 2.4Vdc battery. The antenna is chip antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: SA110113C04 Report Format Version 4.0.0 1 RF EXPOSURE REPORT REPORT NO.: SA110113C04 MODEL NO.: HDR 220 FCC ID: DMORS220H ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: Sennheiser electronic GmbH & Co.KG ADDRESS: Am Labor 1 D-30900 Wedemark Postfach 100 264 D-30892 Wedemark, Germany ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. Report No.: SA110113C04 Report Format Version 4.0.0 2 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED Original release NA Mar. 28, 2011 Report No.: SA110113C04 Report Format Version 4.0.0 3 No evaluation required if power is below this threshold: F(GHz) mW Low 2.412 High 2.464 24.59 Maximum measured transmitter power: Pout (dBm) Pout (mW) Conducted Power 8.0 6.3 EIRP Power 10.0 10.0 *Note: The antenna is chip antenna with 2dBi gain Threshold for no SAR evaluation is 24.59mW Transmitter power is 10.0mW Conclusion: No SAR evaluation required since Transmitter Pout is below FCC threshold

Report No.: RF110113C04 1 Report Format Version 4.0.0 FCC TEST REPORT REPORT NO.: RF110113C04 MODEL NO.: HDR 220 FCC ID: DMORS220H RECEIVED: Jan. 10, 2011 TESTED: Jan. 18 ~ Mar. 02, 2011 ISSUED: Mar. 28, 2011 APPLICANT: Sennheiser electronic GmbH & Co.KG ADDRESS: Am Labor 1 D-30900 Wedemark Postfach 100 264 D-30892 Wedemark, Germany ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 36 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. Report No.: RF110113C04 2 Report Format Version 4.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD.............................................................................................. 4 1. CERTIFICATION........................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 6 3. GENERAL INFORMATION ........................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................... 8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 8 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................... 9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 11 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 11 4. TEST TYPES AND RESULTS .................................................................................... 12 4.1 RADIATED EMISSION MEASUREMENT .................................................................. 12 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................ 12 4.1.2 TEST INSTRUMENTS................................................................................................ 13 4.1.3 TEST PROCEDURES ................................................................................................ 14 4.1.4 DEVIATION FROM TEST STANDARD....................................................................... 14 4.1.5 TEST SETUP.............................................................................................................. 15 4.1.6 EUT OPERATING CONDITIONS ............................................................................... 15 4.1.7 TEST RESULT............................................................................................................ 16 4.2 6dB BANDWIDTH MEASUREMENT.......................................................................... 21 4.2.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ....................................................... 21 4.2.2 TEST INSTRUMENTS................................................................................................ 21 4.2.3 TEST PROCEDURE................................................................................................... 21 4.2.4 DEVIATION FROM TEST STANDARD....................................................................... 21 4.2.5 TEST SETUP.............................................................................................................. 22 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 22 4.2.7 TEST RESULTS ......................................................................................................... 23 4.3 MAXIMUM OUTPUT POWER .................................................................................... 24 4.3.1 LIMITS OF MAXIMUM OUTPUT POWER MEASUREMENT..................................... 24 4.3.2 INSTRUMENTS .......................................................................................................... 24 4.3.3 TEST PROCEDURE................................................................................................... 24 4.3.4 DEVIATION FROM TEST STANDARD....................................................................... 25 4.3.5 TEST SETUP.............................................................................................................. 25 4.3.6 EUT OPERATING CONDITIONS ............................................................................... 25 4.3.7 TEST RESULTS ......................................................................................................... 25 4.4 POWER SPECTRAL DENSITY MEASUREMENT ..................................................... 26 Report No.: RF110113C04 3 Report Format Version 4.0.0 4.4.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT .................................. 26 4.4.2 TEST INSTRUMENTS................................................................................................ 26 4.4.3 TEST PROCEDURE................................................................................................... 26 4.4.4 DEVIATION FROM TEST STANDARD....................................................................... 27 4.4.5 TEST SETUP.............................................................................................................. 27 4.4.6 EUT OPERATING CONDITION............................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST